HLMP-3519-F00XX

T-13/4 (5 mm) High Intensity LED Lamps Technical Data HLMP-331x Series HLMP-341x Series HLMP-351x Series Features • High Intensity • Choice of 3 Bright Colors High Efficiency Red Yellow High Performance Green • Popular T-13/4 Diameter Package • Selected Minimum Intensities • Narrow Viewing Angle • General Purpose Leads • Reliable and Rugged • Available on Tape and Reel Description This family of T-13/4 nondiffused LED lamps is specially designed for applications requiring higher on-axis intensity than is achievable with a standard lamp. The light generated is focused to a narrow beam to achieve this effect. Selection Guide Luminous Intensity Iv (mcd) @ 10 mA Color Red Part Number HLMP-3315 HLMP-3317 HLMP-3316-I00xx HLMP-3316-IJ0xx HLMP-3415 Yellow HLMP-3416 HLMP-3416-G00xx HLMP-3416-IJ0xx HLMP-3517 Green HLMP-3519 HLMP-3519-F00xx HLMP-3519-IJ0xx Min. 13.8 22.00 22.0 22.0 9.2 14.7 14.7 37.6 6.7 10.6 10.6 43.6 Max. 70.4 120.2 139.6 2 Package Dimensions Part Numbering System HLMP - 3 x 1 x - x x x xx Mechanical Option 00: Bulk 01: Tape & Reel, Crimped Leads 02: Tape & Reel, Straight Leads B1: Right Angle Housing, Uneven Leads B2: Right Angle Housing, Even Leads Color Bin Options 0: Full Color Bin Distribution Maximum Iv Bin Options 0: Open (no max. limit) Others: Please refer to the Iv Bin Table Minimum Iv Bin Options Please refer to the Iv Bin Table Brightness Level 5, 7: Less Brightness 6, 9: Higher Brightness Color Options 3: GaP HER 4: GaP Yellow 5: GaP Green 3 Electrical Characteristics at TA = 25°C Symbol IV Description Luminous Intensity Device HLMP3315 3316 3415 3416 3517 3519 2θ1/2 Including Angle Between Half Luminous Intensity Points 3315 3316 3415 3416 3517 3519 λPEAK Peak Wavelength 331X 341X 351X 331X 341X 351X 331X 341X 351X 331X 341X 351X 331X 341X 351X 331X 341X 351X 331X 341X 351X All 331X 341X 351X 5.0 145 500 595 Min. 13.8 22 9.2 14.7 6.7 10.6 Typ. 40.0 60.0 40.0 50.0 50.0 70.0 35 35 35 35 24 24 635 583 565 40 36 28 626 585 569 90 90 500 11 15 18 260 Max. Units mcd mcd mcd Deg. Test Conditions IF = 10 mA (Figure 3) IF = 10 mA (Figure 8) IF = 10 mA (Figure 13) IF = 10 mA See Note 1 (Figure 6) IF = 10 mA See Note 1 (Figure 11) IF = 10 mA See Note 1 (Figure 16) Measurement at Peak (Figure 1) Deg. Deg. nm ∆λ1/2 Spectral Line Halfwidth nm λd Dominant Wavelength nm See Note 2 (Figure 1) τs Speed of Response ns C Capacitance pF VF = 0; f = 1 MHz RθJ-PIN Thermal Resistance °C/W Junction to Cathode Lead IF = 10 mA (Figure 2) IF = 10 mA (Figure 7) IF = 10 mA (Figure 12) IR = 100 µA See Note 3 VF Forward Voltage 1.9 2.0 2.1 2.4 2.4 2.7 V VR ηV Reverse Breakdown Volt. Luminous Efficacy V lumens Watt Notes: 1. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity. 2. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. 3. Radiant intensity, Ie, in watts/steradian, may be found from the equation I e = Iv/ηv, where Iv is the luminous intensity in candelas and ηv is the luminous efficacy in lumens/watt. 4 Absolute Maximum Ratings at TA = 25°C Parameter Peak Forward Current Average Forward DC Current[2] Dissipation[3] Current[4] Power Current[1] 331X Series 90 25 30 135 5 500 110 -55 to +100 341X Series 60 20 20 85 5 500 110 -55 to +100 351X Series 90 25 30 135 5 500 110 -20 to +100 -55 to +100 260°C for 5 seconds Units mA mA mA mW V mA °C °C Reverse Voltage (IR = 100 µA) Transient Forward (10 µsec Pulse) LED Junction Temperature Operating Temperature Range Storage Temperature Range Lead Soldering Temperature [1.6 mm (0.063 in.) from body] Notes: 1. See Figure 5 (Red), 10 (Yellow), or 15 (Green) to establish pulsed operating conditions. 2. For Red and Green series derate linearly from 50°C at 0.5 mA/°C. For Yellow series derate linearly from 50°C at 0.2 mA/°C. 3. For Red and Green series derate power linearly from 25°C at 1.8 mW/°C. For Yellow series derate power linearly from 50 °C at 1.6 mW/°C. 4. The transient peak current is the maximum non-recurring peak current that can be applied to the device without damaging the LED die and wirebond. It is not recommended that the device be operated at peak currents beyond the peak forward current listed in the Absolute Maximum Ratings. Figure 1. Relative Intensity vs. Wavelength. 5 High Efficiency Red HLMP-331X Series Figure 2. Forward Current vs. Forward Voltage Characteristics. Figure 3. Relative Luminous Intensity vs. DC Forward Current. Figure 4. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak LED Current. Figure 5. Maximum Tolerable Peak Current vs. Pulse Duration (IDC MAX as per MAX Ratings). Figure 6. Relative Luminous Intensity vs. Angular Displacement. 6 Yellow HLMP-341X Series Figure 7. Forward Current vs. Forward Voltage Characteristics. Figure 8. Relative Luminous Intensity vs. DC Forward Current. Figure 9. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak Current. Figure 10. Maximum Tolerable Peak Current vs. Pulse Duration (IDC MAX as per MAX Ratings). Figure 11. Relative Luminous Intensity vs. Angular Displacement. 7 Green HLMP-351X Series Figure 12. Forward Current vs. Forward Voltage Characteristics. Figure 13. Relative Luminous Intensity vs. DC Forward Current. Figure 14. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak LED Current. Figure 15. Maximum Tolerable Peak Current vs. Pulse Duration (IDC MAX as per MAX Ratings). Figure 16. Relative Luminous Intensity vs. Angular Displacement. T-1 3/4 Lamp. 8 Table 2. Intensity Bin Limit Intensity Range (mcd) Color Bin Min. Max. H 15.5 24.8 I 24.8 39.6 J 39.6 63.4 K 63.4 101.5 L 101.5 162.4 M 162.4 234.6 N 234.6 340.0 O 340.0 540.0 Red P 540.0 850.0 Q 850.0 1200.0 R 1200.0 1700.0 S 1700.0 2400.0 T 2400.0 3400.0 U 3400.0 4900.0 V 4900.0 7100.0 W 7100.0 10200.0 X 10200.0 14800.0 Y 14800.0 21400.0 Z 21400.0 30900.0 Maximum tolerance for each bin limit is ± 18%. Table 2. (Cont'd) Intensity Range (mcd) Color Bin Min. Max. G 16.6 26.5 H 26.5 42.3 I 42.3 67.7 J 67.7 108.2 K 108.2 173.2 L 173.2 250.0 M 250.0 360.0 Yellow N 360.0 510.0 O 510.0 800.0 P 800.0 1250.0 Q 1250.0 1800.0 R 1800.0 2900.0 S 2900.0 4700.0 T 4700.0 7200.0 U 7200.0 11700.0 V 11700.0 18000.0 W 18000.0 27000.0 Table 2. (Cont'd) Intensity Range (mcd) Color Bin Min. Max. E 7.6 12.0 F 12.0 19.1 G 19.1 30.7 H 30.7 49.1 I 49.1 78.5 J 78.5 125.7 K 125.7 201.1 L 201.1 289.0 Green M 289.0 417.0 N 417.0 680.0 O 680.0 1100.0 P 1100.0 1800.0 Q 1800.0 2700.0 R 2700.0 4300.0 S 4300.0 6800.0 T 6800.0 10800.0 U 10800.0 16000.0 V 16000.0 25000.0 W 25000.0 40000.0 9 Color Categories Color Cat # 6 5 Green 4 3 2 1 3 Yellow 2 4 5 Tolerance for each bin limit is ± 0.5 nm. Lambda (nm) Min. Max. 561.5 564.5 567.5 570.5 573.5 582.0 584.5 587.0 589.5 592.0 564.5 567.5 570.5 573.5 576.5 584.5 587.0 589.5 592.0 593.0 Mechanical Option Matrix Mechanical Option Code 00 01 02 B1 B2 Definition Bulk Packaging, minimum increment 500 pcs/bag Tape & Reel, crimped leads, minimum increment 1300 pcs/bag Tape & Reel, straight leads, minimum increment 1300 pcs/bag Right Angle Housing, uneven leads, minimum increment 500 pcs/bag Right Angle Housing, even leads, minimum increment 500 pcs/bag Note: All Categories are established for classification of products. Products may not be available in all categories. Please contact your local Agilent representative for further clarification/information. www.semiconductor.agilent.com Data subject to change. Copyright © 2001 Agilent Technologies, Inc. July 16, 2001 Obsoletes 5964-9293E (4/96) 5988-2146EN