HLMP-4719D0B02

T-13/4 (5 mm), T-1 (3 mm), Low Current LED Lamps Technical Data HLMP-4700, -4719, -4740 HLMP-1700, -1719, -1790 Features • Low Power • High Efficiency • CMOS-MOS Compatible • TTL Compatible • Wide Viewing Angle • Choice of Package Styles • Choice of Colors • Portable Equipment • Keyboard Indicators Description These tinted diffused LED lamps are designed and optimized specifically for low DC current operation. Luminous intensity and forward voltage are tested at 2 mA to assure consistent brightness at TTL output current levels. Applications • Low Power DC Circuits • Telecommunications Indicators Package Dimensions HLMP-7000, -7019, -7040 HLMP-4700, -4719, -4740 HLMP-1700, -1719, -1790 A B 2 Selection Guide Package Description T-1 3/4 Tinted Diffused Color Red Device HLMP4700 4700-C00xx 4700-CD0FH 4719 4719-A00xx 4740 4740-A00xx 4740-AB000 1700 1700-B00xx 1719 1719-A00xx 1719-ABB00 1790 1790-A00xx 1790-AB0FH Luminous Intensity Iv (mcd) at 2 mA Min. Typ. Max. 1.5 2.3 – 1.5 1.5 0.9 0.9 1.0 1.0 1.0 0.8 0.8 0.9 0.9 0.9 1.0 1.0 1.0 2.3 2.3 2.1 2.1 2.3 2.3 2.3 2.1 2.1 2.1 2.1 2.1 2.3 2.3 2.4 – 4.2 – – – – 3.2 – – – – 2.8 – – 3.2 2θ1/2 50 Package Outline A Yellow Green T-1 Tinted Diffused Red Yellow 50 B Green Note: 1. θ1/2 is the typical off-axis angle at which the luminous intensity is half the axial luminous intensity. 3 Part Numbering System HLMP-X 7 XX - X XX XX Mechanical Option 00: Bulk 01: Tape & Reel, Crimped Leads 02, BH: Tape & Reel, Straight Leads A1, B1: Right Angle Housing, Uneven Leads A2, B2: Right Angle Housing, Even Leads FH: 2 Iv bins select with Inventory Control Color Bin Options 0: Full color bin distribution B: Color bins 2 & 3 only Maximum Iv Bin Options 0: Open (No. max. limit) Others: Please refer to the Iv bin Table Minimum Iv Bin Options Please refer to the Iv Bin Table Color Option 00: GaP HER 19: GaP Yellow 40: GaP Green 90: GaP Green Package Options 4: T-13/4 (5 mm) 1: T-1 (3 mm) 4 Electrical/Optical Characteristics at TA = 25°C Symbol VF Description Forward Voltage T-13/4 4700 4719 4740 4700 4719 4740 4700 4719 4740 4700 4719 4740 4700 4719 4740 4700 4719 4740 4700 4719 4740 4700 4719 4740 4700 4719 4740 T-1 1700 1719 1790 1700 1719 1790 1700 1719 1790 1700 1719 1790 1700 1719 1790 1700 1719 1790 1700 1719 1790 1700 1719 1790 1700 1719 1790 5.0 5.0 5.0 626 585 569 40 36 28 90 90 500 11 15 18 260[3] 290[4] 635 583 565 145 500 595 Min. Typ. 1.7 1.8 1.9 Max. 2.0 2.5 2.2 Units V Test Conditions 2 mA VR Reverse Breakdown Voltage Dominant Wavelength Spectral Line Halfwidth Speed of Response V IR = 50 µA λd nm Note 1 ∆λ1/2 nm τS ns C Capacitance pF VF = 0, f = 1 MHz Junction to Cathode Lead Measurement at peak Note 2 RθJ-PIN Thermal Resistance Peak Wavelength °C/W λPEAK nm ηV Luminous Efficacy lumens watt Notes: 1. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. 2. The radiant intensity, Ie, in watts per steradian, may be found from the equation I e = IV/ηV, where IV is the luminous intensity in candelas and ηV is luminous efficacy in lumens/watt. 3. T-13/4. 4. T-1. 5 Absolute Maximum Ratings Parameter Power Dissipation (Derate linearly from 92°C at 1.0 mA/°C) DC and Peak Forward Current Transient Forward Current (10 µs Reverse Voltage (IR = 50 µA) Operating Temperature Range Storage Temperature Range Lead Soldering Temperature [1.6 mm (0.063 in.) from body] Red/Yellow Green Pulse)[1] Maximum Rating Red Yellow Green 7 500 5.0 -55°C to 100°C -20°C to 100°C -55°C to +100°C 260°C for 5 seconds 24 36 24 Units mW mA mA V Note: 1. The transient peak current is the maximum non-recurring peak current the devices can withstand without damaging the LED die and wire bonds. It is not recommended that the device be operated at peak currents beyond the Absolute Maximum Peak Forward Current. Figure 1. Relative Intensity vs. Wavelength. 10 8 DC CURRENT – mA RED 6 YELLOW GREEN 4 2 0 0 0.5 1.0 1.5 2.0 2.5 VOLTAGE – V Figure 2. Forward Current vs. Forward Voltage. Figure 3. Relative Luminous Intensity vs. Forward Current. 6 Figure 4. Relative Luminous Intensity vs. Angular Displacement for T-1 3/4 Lamp. Figure 5. Relative Luminous Intensity vs. Angular Displacement for T-1 Lamp. Intensity Bin Limits Color Red Bin B C D E F G H I J K L M N O P Q R S T U V W X Y Z Intensity Range (mcd) Min. Max. 0.9 1.5 1.5 2.4 2.4 3.8 3.8 6.1 6.1 9.7 9.7 15.5 15.5 24.8 24.8 39.6 39.6 63.4 63.4 101.5 101.5 162.4 162.4 234.6 234.6 340.0 340.0 540.0 540.0 850.0 850.0 1200.0 1200.0 1700.0 1700.0 2400.0 2400.0 3400.0 3400.0 4900.0 4900.0 7100.0 7100.0 10200.0 10200.0 14800.0 14800.0 21400.0 21400.0 30900.0 Maximum tolerance for each bin limit is ± 18%. 7 Intensity Bin Limits, continued Color Yellow Bin A B C D E F G H I J K L M N O P Q R S T U V W Intensity Range (mcd) Min. Max. 1.0 1.6 1.6 2.5 2.5 4.0 4.0 6.5 6.5 10.3 10.3 16.6 16.6 26.5 26.5 42.3 42.3 67.7 67.7 108.2 108.2 173.2 173.2 250.0 250.0 360.0 360.0 510.0 510.0 800.0 800.0 1250.0 1250.0 1800.0 1800.0 2900.0 2900.0 4700.0 4700.0 7200.0 7200.0 11700.0 11700.0 18000.0 18000.0 27000.0 Maximum tolerance for each bin limit is ± 18%. 8 Intensity Bin Limits, continued Color Green Bin A B C D E F G H I J K L M N O P Q R S T U V W Intensity Range (mcd) Min. Max. 1.1 1.8 1.8 2.9 2.9 4.7 4.7 7.6 7.6 12.0 12.0 19.1 19.1 30.7 30.7 49.1 49.1 78.5 78.5 125.7 125.7 201.1 201.1 289.0 289.0 417.0 417.0 680.0 680.0 1100.0 1100.0 1800.0 1800.0 2700.0 2700.0 4300.0 4300.0 6800.0 6800.0 10800.0 10800.0 16000.0 16000.0 25000.0 25000.0 40000.0 Maximum tolerance for each bin limit is ± 18%. 9 Color Categories Color Category # 6 5 4 3 2 1 3 2 4 5 Lambda (nm) Min. Max. 561.5 564.5 564.5 567.5 567.5 570.5 570.5 573.5 573.5 576.5 582.0 584.5 584.5 587.0 587.0 589.5 589.5 592.0 592.0 593.0 Green Yellow Tolerance for each bin limit is ± 0.5 nm. Mechanical Option Matrix Mechanical Option Code 00 01 02 A1 A2 B1 B2 BH FH R1 Definition Bulk Packaging, minimum increment 500 pcs/bag Tape & Reel, crimped leads, min. increment 1300 pcs/bag for T-1 3/4, 1800 pcs/bag for T-1 Tape & Reel, straight leads, min. increment 1300 pcs/bag for T-1 3/4, 1800 pcs/bag for T-1 T-1, Right Angle Housing, uneven leads, minimum increment 500 pcs/bag T-1, Right Angle Housing, even leads, minimum increment 500 pcs/bag T-1 3/4, Right Angle Housing, uneven leads, minimum increment 500 pcs/bag T-1 3/4, Right Angle Housing, even leads, minimum increment 500 pcs/bag T-1, Tape & Reel, straight leads, minimum increment 2000 pcs/bag Devices that require inventory control and 2 Iv bin select Tape & Reel, crimped leads, reeled counter clockwise, cathode lead leaving the reel first Note: All categories are established for classification of products. Products may not be available in all categories. Please contact your local Agilent representative for further clarification/information. www.agilent.com/semiconductors For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (916) 788-6763 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 6756 2394 India, Australia, New Zealand: (+65) 6755 1939 Japan: (+81 3) 3335-8152(Domestic/International), or 0120-61-1280(Domestic Only) Korea: (+65) 6755 1989 Singapore, Malaysia, Vietnam, Thailand, Philippines, Indonesia: (+65) 6755 2044 Taiwan: (+65) 6755 1843 Data subject to change. Copyright © 2003 Agilent Technologies, Inc. September 10, 2003 5988-8054EN