HRPG-AS16

Miniature Panel Mount Optical Encoders Technical Data HRPG Series Features • Miniature Size • Smooth Turning and Detented Options • Multiple Mounting Bracket Options • Uses Optical Reflective Technology • Quadrature Digital Output • Small Footprint for Versatile Mounting • TTL Compatible The HRPG uses optical reflective technology providing accuracy and reliability to the encoder. An LED emits a beam of light onto the specular codewheel surface. When the light strikes the surface, it projects the image of the codewheel back on the photodetector, causing the output to change. The entire detector circuit is on one IC, thus the part is less sensitive to temperature and other environmental variations. Description The HRPG series is a family of miniature panel mount optical encoders, also known as Rotary Pulse Generators (RPG) and digital potentiometers. The HRPG is designed to be mounted on a front panel and used as a rotary, data-entry device. The HRPG is very flexible for numerous applications due to the many configuration options available. These options include detents or smooth, multiple terminations, versatile mounting capabilities, and different shaft configurations. Applications Typical applications for the Rotary Pulse Generator include front panel instruments, audio/ visual boards, and other devices requiring digital output from a turning knob. Note: Agilent Technologies encoders are not recommended for use in safety critical applications. Eg. ABS braking systems, power steering, life support systems and critical care medical equipment. Please contact sales representative if more clarification is needed. 2 Absolute Maximum Ratings Parameter Storage Temperature Operating Temperature Vibration Supply Voltage Output Voltage Output Current Per Channel Shaft Load – Axial Shaft Load – Radial Revolution Life Symbol TS TA VCC VO IO Min. -40 0 -0.5 -0.5 -1 Max. +85 +70 20 7 VCC 5 4.0 0.1 Units °C °C g V V mA N Nm Rev Notes 20 Hz to 2 kHz 106 106 Revolutions 106 Revolutions At Maximum Loads Recommended Operating Conditions Parameter Temperature Supply Voltage Rotation Speed – Detented – Smooth Symbol T VCC Min. 0 4.5 Max. +70 5.5 200 300 Units °C V RPM RPM Notes Noncondensing Atmosphere Ripple < 100 mVP-P Electrical Characteristics Over Recommended Operating Range Parameter Supply Current High Level Output Voltage Low Level Output Voltage Symbol ICC VOH VOL Min. 2.4 0.4 Max. 40 Units mA V V Notes IOH = - 40 µA Max. IOL = 3.2 mA Output Waveforms 3 Mechanical Configurations Termination Options Option R – Pins Rear with Bracket HRPG-AXXX#XXR 4 Option F – Pins Front with Bracket HRPG-AXXX#XXF 5 Option C – Cable Connector with Strain Relief HRPG-AXXX#XXC 6 Shaft Configurations Shaft Dimensions (D-cut shown also) 7 Shaft Options Available Shaft Length (l) 0.30" Shaft Diameter (d) 0.251" D-Cut Thickness (c) – D-Cut Length (b) – Sketch (not to scale) Option # 11 13 0.30" 0.250" 0.225" 0.230" 14 0.50" 0.251" – – 16 0.50" 0.250" 0.225" 0.400" 17 0.80" 0.251" – – 19 0.80" 0.250" 0.225" 0.700" 51 7.6 mm 6.02 mm – – 53 7.6 mm 6.00 mm 5.33 mm 5.84 mm 54 12.7 mm 6.02 mm – _ 56 12.7 mm 6.00 mm 5.33 mm 10.16 mm 57 20.32 mm 6.02 mm – – 59 20.32 mm 6.00 mm 5.33 mm 17.78 mm Typical Interface HRPG SERIES CH A CH B HCTL-2016/2020 QUADRATURE DECODER/ COUNTER HOST PROCESSOR Ordering Information HRPG - A # Shaft / Resolution S16 – Smooth 16CPR D16 – Detented 16CPR* S32 – Smooth 32CPR D32 – Detented 32CPR* SCA – Smooth 120CPR Mechanical Configuration 11 – 0.3" long, 0.25" dia. 13 – 0.3" long, 0.25" dia. D-cut 14 – 0.5" long, 0.25" dia. 16 – 0.5" long, 0.25" dia. D-cut 17 – 0.8" long, 0.25" dia. 19 – 0.8" long, 0.25" dia. D-cut 51 – 7.6 mm long, 6 mm dia. 53 – 7.6 mm long, 6 mm dia. D-cut 54 – 12.7 mm long, 6 mm dia. 56 – 12.7 mm long, 6 mm dia. D-cut Termination F – Pins Front with Bracket R – Pins Rear with Bracket C – Cable Connector with Strain Relief *Note: When ordering detented versions, a D-cut shaft is recommended. HRPG Series 11 13 14 16 17 19 51 53 54 56 57 59 AD16 F * ** * R * * * C * * L AD32 F *** *** * * R**** * *** * C***** **** * L AS16 F * * R* * C * * L AS32 F** * R ** * C * * L ASCA F* *** * *** * * R***** ** ** C***** * *** * L www.agilent.com/semiconductors For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (408) 654-8675 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 271 2451 India, Australia, New Zealand: (+65) 271 2394 Japan: (+81 3) 3335-8152(Domestic/International), or 0120-61-1280(Domestic Only) Korea: (+65) 271 2194 Malaysia, Singapore: (+65) 271 2054 Taiwan: (+65) 271 2654 Data subject to change. Copyright © 2002 Agilent Technologies, Inc. Obsoletes 5988-3995EN March 15, 2002 5988-5851EN