MSA-0611-BLK

Cascadable Silicon Bipolar MMIC Amplifier Technical Data MSA-0611 Features • Cascadable 50 Ω Gain Block • 3 dB Bandwidth: DC to 0.7 GHz • High Gain: 18.0 dB Typical at 0.5 GHz • Low Noise Figure: 3.0 dB Typical at 0.5 GHz • Low Cost Surface Mount Plastic Package • Tape-and-Reel Packaging Option Available[1] Description The MSA-0611 is a low cost silicon bipolar Monolithic Microwave Integrated Circuit (MMIC) housed in the surface mount plastic SOT-143 package. This MMIC is designed for use as a general purpose 50 Ω gain block. Typical applications include narrow and broad band IF and RF amplifiers in commercial and industrial applications. The MSA-series is fabricated using HP’s 10 GHz fT, 25 GHz f MAX, silicon bipolar MMIC process which uses nitride self-alignment, ion implantation, and gold metallization to achieve excellent SOT-143 Package Note: 1. Refer to PACKAGING section “Tapeand-Reel Packaging for Semiconductor Devices”. performance, uniformity and reliability. The use of an external bias resistor for temperature and current stability also allows bias flexibility. Typical Biasing Configuration R bias VCC > 5 V RFC (Optional) C block IN MSA C block OUT Vd = 3.3 V 5965-9584E 6-366 MSA-0611 Absolute Maximum Ratings Parameter Device Current Power Dissipation[2,3] RF Input Power Junction Temperature Storage Temperature Absolute Maximum[1] 40 mA 125 mW +13 dBm 150°C –65 to 150°C Thermal Resistance[2,4]: θjc = 505°C/W Notes: 1. Permanent damage may occur if any of these limits are exceeded. 2. TCASE = 25°C. 3. Derate at 2.0 mW/°C for TC > 87°C. 4. See MEASUREMENTS section “Thermal Resistance” for more information. Electrical Specifications[1], TA = 25°C Symbol GP ∆G P f3 dB VSWR NF P1 dB IP3 tD Vd dV/dT Parameters and Test Conditions: Id = 16 mA, ZO = 50 Ω Power Gain (|S21| 2) Gain Flatness 3 dB Bandwidth Input VSWR Output VSWR 50 Ω Noise Figure Output Power at 1 dB Gain Compression Third Order Intercept Point Group Delay Device Voltage Device Voltage Temperature Coefficient f = 0.1 to 1.5 GHz f = 0.1 to 1.5 GHz f = 0.5 GHz f = 0.5 GHz f = 0.5 GHz f = 0.5 GHz TC = 25°C f = 0.1 GHz f = 0.5 GHz f = 0.1 to 0.5 GHz Units dB Min. 16.0 Typ. 19.5 18.0 ± 0.8 0.7 1.6:1 1.5:1 Max. dB GHz dB dBm dBm psec V mV/ °C 2.6 3.0 2.0 14.0 225 3.3 –8.0 4.0 Notes: 1. The recommended operating current range for this device is 12 to 20 mA. Typical gain performance as a function of current is on the following page. Part Number Ordering Information Part Number MSA-0611-TR1 MSA-0611-BLK No. of Devices 3000 100 Container 7" Reel Antistatic Bag For more information, see “Tape and Reel Packaging for Semiconductor Devices”. 6-367 MSA-0611 Typical Scattering Parameters (ZO = 50 Ω, TA = 25°C, Id = 16 mA) Freq. GHz S11 Mag Ang dB S21 Mag Ang dB S12 Mag Ang Mag S22 Ang k 0.1 0.2 0.3 0.4 0.5 0.6 0.8 1.0 1.5 2.0 2.5 3.0 3.5 4.0 .04 .03 .03 .04 .05 .07 .10 .13 .22 .31 .39 .45 .50 .52 –176 –163 –149 –132 –127 –123 –129 –139 –164 171 158 144 132 121 19.6 19.3 18.9 18.5 18.0 17.3 16.2 15.0 12.5 10.1 8.1 6.3 4.7 3.4 9.53 9.25 8.79 8.38 7.96 7.33 6.46 5.64 4.22 3.20 2.55 2.07 1.72 1.48 170 160 150 141 133 125 111 98 73 53 42 28 16 4 –23.0 –22.7 –22.8 –21.9 –21.6 –21.2 –19.7 –19.0 –17.1 –16.1 –15.4 –15.0 –14.6 –14.1 .071 .073 .072 .080 .083 .087 .103 .112 .139 .157 .169 .178 .185 .197 6 10 14 17 21 23 25 28 25 21 22 18 15 11 .04 .07 .09 .11 .13 .15 .17 .18 .19 .19 .20 .19 .16 .14 –57 –82 –97 –111 –122 –131 –147 –160 175 160 153 150 152 166 1.07 1.07 1.10 1.07 1.07 1.07 1.04 1.06 1.07 1.13 1.19 1.26 1.33 1.37 A model for this device is available in the DEVICE MODELS section. Typical Performance, TA = 25°C (unless otherwise noted) 21 18 Gain Flat to DC 15 20 25 0.1 GHz 0.5 GHz 1.0 GHz 4 3 G p (dB) 12 9 6 G p (dB) 15 P1 dB (dBm) 2 2.0 GHz 10 1 5 3 0 0.1 0.3 0.5 1.0 3.0 6.0 FREQUENCY (GHz) 0 10 15 20 25 30 I d (mA) 0 0.1 0.2 0.3 0.5 1.0 2.0 FREQUENCY (GHz) Figure 1. Power Gain vs. Frequency, TA = 25°C, Id = 16 mA. Figure 2. Power Gain vs. Current. Figure 3. Output Power @ 1 dB Gain Compression vs. Frequency, Id = 16 mA. 4.0 3.5 NF (dB) 3.0 2.5 0.1 0.2 0.3 0.5 1.0 2.0 FREQUENCY (GHz) Figure 4. Noise Figure vs. Frequency, Id = 16 mA. 6-368 SOT-143 Package Dimensions 0.92 (0.036) 0.78 (0.031) PACKAGE MARKING CODE GROUND XXX A06 RF INPUT 0.60 (0.024) 0.45 (0.018) 2.04 (0.080) 1.78 (0.070) 3.06 (0.120) 2.80 (0.110) RF OUTPUT AND BIAS 1.40 (0.055) 1.20 (0.047) GROUND 2.65 (0.104) 2.10 (0.083) 0.54 (0.021) 0.37 (0.015) 0.15 (0.006) 0.09 (0.003) 1.02 (0.041) 0.85 (0.033) 0.10 (0.004) 0.013 (0.0005) DIMENSIONS ARE IN MILLIMETERS (INCHES) 0.69 (0.027) 0.45 (0.018) 6-369