MSA-0711

Cascadable Silicon Bipolar MMIC Amplifier Technical Data MSA-0711 Features • Cascadable 50 Ω Gain Block • 3 dB Bandwidth: DC to 1.9 GHz • 12.0 dB Typical Gain at 1.0 GHz • Unconditionally Stable (k>1) • Low Cost Surface Mount Plastic Package • Tape-and-Reel Packaging Option Available[1] Note: 1. Refer to PACKAGING section “Tapeand-Reel Packaging for Surface Mount Semiconductors”. Description The MSA-0711 is a low cost silicon bipolar Monolithic Microwave Integrated Circuit (MMIC) housed in the surface mount plastic SOT-143 package. This MMIC is designed for use as a general purpose 50 Ω gain block. Typical applications include narrow and broad band IF and RF amplifiers in commercial and industrial applications. The MSA-series is fabricated using HP’s 10 GHz fT, 25 GHz f MAX, silicon bipolar MMIC process which uses nitride self-alignment, ion implantation, and gold metalli- SOT-143 Package zation to achieve excellent performance, uniformity and reliability. The use of an external bias resistor for temperature and current stability also allows bias flexibility. Typical Biasing Configuration R bias VCC > 5 V RFC (Optional) C block IN MSA C block OUT Vd = 3.8 V 5965-9590E 6-390 MSA-0711 Absolute Maximum Ratings Parameter Device Current Power Dissipation[2,3] RF Input Power Junction Temperature Storage Temperature Absolute Maximum[1] 50 mA 175 mW +13 dBm 150°C –65 to 150°C Thermal Resistance[2,4]: θjc = 505°C/W Notes: 1. Permanent damage may occur if any of these limits are exceeded. 2. TCASE = 25°C. 3. Derate at 2.0 mW/°C for TC > 62°C. 4. See MEASUREMENTS section “Thermal Resistance” for more information. Electrical Specifications[1], TA = 25°C Symbol GP ∆ GP f3 dB VSWR NF P1 dB IP3 tD Vd dV/dT Parameters and Test Conditions: Id = 22 mA, ZO = 50 Ω Power Gain (|S21| 2) Gain Flatness 3 dB Bandwidth Input VSWR Output VSWR 50 Ω Noise Figure Output Power at 1 dB Gain Compression Third Order Intercept Point Group Delay Device Voltage Device Voltage Temperature Coefficient f = 0.1 to 2.0 GHz f = 0.1 to 2.0 GHz f = 1.0 GHz f = 1.0 GHz f = 1.0 GHz f = 1.0 GHz TC = 25°C f = 0.1 GHz f = 1.0 GHz f = 0.1 to 1.3 GHz Units dB Min. 10.0 Typ. 13.0 12.0 ± 0.8 3.2 1.5:1 1.5:1 Max. dB GHz dB dBm dBm psec V mV/ °C 3.0 5.0 5.5 18.0 145 3.8 –7.0 4.6 Note: 1. The recommended operating current range for this device is 15 to 30 mA. Typical performance as a function of current is on the following page. Part Number Ordering Information Part Number MSA-0711-TR1 MSA-0711-BLK No. of Devices 3000 100 Container 7" Reel Antistatic Bag For more information, see “Tape and Reel Packaging for Semiconductor Devices”. 6-391 MSA-0711 Typical Scattering Parameters (ZO = 50 Ω, TA = 25°C, Id = 22 mA) Freq. GHz S11 Mag Ang dB S21 Mag Ang dB S12 Mag Ang Mag S22 Ang 0.1 0.2 0.4 0.6 0.8 1.0 1.5 2.0 2.5 3.0 3.5 4.0 .03 .04 .04 .05 .07 .08 .13 .18 .25 .32 .38 .42 1 1 –4 –19 –32 –44 –88 –130 –155 –178 165 152 13.0 12.9 12.8 12.6 12.3 12.0 10.9 9.8 8.6 7.2 5.8 4.5 4.47 4.42 4.38 4.28 4.14 3.99 3.52 3.08 2.68 2.30 1.96 1.68 174 168 157 146 135 123 98 75 61 42 26 12 –18.6 –18.5 –18.4 –18.1 –17.7 –17.4 –16.1 –15.2 –14.7 –14.7 –14.8 –14.7 .118 .119 .120 .125 .130 .135 .157 .173 .184 .185 .181 .184 1 2 4 9 10 12 13 8 9 5 3 1 .19 .19 .19 .19 .20 .19 .19 .18 .18 .17 .17 .20 –8 –18 –36 –52 –68 –82 –113 –138 –151 –158 –150 –142 A model for this device is available in the DEVICE MODELS section. Typical Performance, TA = 25°C (unless otherwise noted) 14 12 10 Gain Flat to DC 16 14 12 0.1 GHz 1.0 GHz 7 6 P1 dB (dBm) G p (dB) 8 6 4 2 0 0.1 0.3 0.5 1.0 3.0 6.0 FREQUENCY (GHz) G p (dB) 2.0 GHz 10 5 4 8 6 4 10 20 30 I d (mA) 40 3 2 0.1 0.2 0.3 0.5 1.0 2.0 FREQUENCY (GHz) Figure 1. Power Gain vs. Frequency, Id = 22 mA. Figure 2. Power Gain vs. Current. Figure 3. Output Power at 1 dB Gain Compression vs. Frequency, Id = 22 mA. 6.5 6.0 NF (dB) 5.5 5.0 4.5 0.1 0.2 0.3 0.5 1.0 2.0 FREQUENCY (GHz) Figure 4. Noise Figure vs. Frequency, Id = 22 mA. 6-392 SOT-143 Package Dimensions 0.92 (0.036) 0.78 (0.031) PACKAGE MARKING CODE GROUND XXX A07 RF INPUT 0.60 (0.024) 0.45 (0.018) 2.04 (0.080) 1.78 (0.070) 3.06 (0.120) 2.80 (0.110) RF OUTPUT AND BIAS 1.40 (0.055) 1.20 (0.047) GROUND 2.65 (0.104) 2.10 (0.083) 0.54 (0.021) 0.37 (0.015) 0.15 (0.006) 0.09 (0.003) 1.02 (0.041) 0.85 (0.033) 0.10 (0.004) 0.013 (0.0005) DIMENSIONS ARE IN MILLIMETERS (INCHES) 0.69 (0.027) 0.45 (0.018) 6-393