0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
431Z

431Z

  • 厂商:

    HTC(泰进)

  • 封装:

  • 描述:

    431Z - PROGRAMMABLE PRECISION SHUNT REGULATOR - HTC Korea TAEJIN Technology Co.

  • 详情介绍
  • 数据手册
  • 价格&库存
431Z 数据手册
PROGRAMMABLE PRECISION SHUNT REGULATOR FEATURES Programmable Output Voltage to 40V Guaranteed 0.5% Reference Voltage Tolerance Low (0.2Ω Typ.) Dynamic Output Impedance Cathode Current Range(Continuous) – 100 ~ 150 mA Equivalent Full Range Temperature Coefficient of 50PPM/℃ Temperature Compensated For Operation Over Full Rate Operating Temperature Range Low Output Noise Voltage Fast Turn-on Response TO-92, SOT-89 or SOT-23 3L Package TL431Z/AZ/CZ TO-92 PKG 3 T O P 2 1 SOT-23 PKG 2 TOP APPLICATION Shunt Regulator Precision High-Current Series Regulator High-Current Shunt Regulator Crowbar Circuit PWM Converter With Reference Voltage Monitor Precision Current Limiter 1 3 SOT-89 PKG TOP DESCRIPSION The TL431Z is a three-terminal adjustable shunt regulator with specified thermal stability over applicable temperature VREF (Approx. 2.5V) and 40V with two external resistors. This device has a typical dynamic output impedance of 0.2Ω. Active output circuitry provides a very sharp turn-on characteristic, making this device excellent replacement for zener diodes in many applications. The TL431Z is characterized for operation from -40℃ to +125℃. PIN 1. Reference ORDERING INFORMATION Device (Marking) TL431Z TL431-AZ TL431-CZ 431Z 431Z 1 2 3 2. Anode 3. Cathode Package TO-92 SOT-23 3L SOT-89 3L Absolute Maximum Ratings (Operating temperature range applies unless otherwise specified) CHARACTERISTIC Cathode Voltage Cathode Current Range(Continuous) Reference Input Current Range Junction Temperature Range Storage Temperature Range Operating Temperature Range 2009 – Obsolete SYMBOL VKA IK IREF TJ TSTG TOPR MIN. -100 0.05 0 -60 -40 MAX. 42 150 10 150 150 125 UNIT V mA mA ℃ ℃ ℃ -1- HTC PROGRAMMABLE PRECISION SHUNT REGULATOR RECOMMENDED OPERATING CONDITIONS CHARACTERISTIC Cathode Voltage Cathode Current TL431Z/AZ/CZ MAX. 40 100 SYMBOL VKA IK MIN. VREF 0.5 UNIT V mA Ordering Information VREF Package Tolerance 0.5% Order No. TL431CZ TL431CZTA TL431AZ TL431AZTA TL431Z TL431ZTA TL431CZSF TL431AZSF TL431ZSF TL431CZF TL431AZF TL431ZF Package Marking TL431-CZ Status Obsolete Obsolete Obsolete Obsolete Obsolete Obsolete Obsolete TO-92 1% TL431-AZ 2% 2.495V SOT-23 0.5% 1% 2% 0.5% SOT-89 1% 2% TL431Z 431Z Obsolete Obsolete Obsolete 431Z Obsolete Obsolete TL 431 CZ SF Package Type Blank TA SF F CZ : 0.5% AZ : 1% Z : 2% : Bulk : TO-92 : SOT-23 : SOT-89 Tolerance Root Name Product Code 2009 – Obsolete -2- HTC PROGRAMMABLE PRECISION SHUNT REGULATOR PIN CONFIGURATION Marking Side 2 TL431Z/AZ/CZ TOP TOP 1 123 3 1 2 3 TO-92 PKG SOT-23 PKG SOT-89 PKG PIN DESCRIPTION Pin No. 1 2 3 TO-92 / SOT-23 / SOT-89 Name Reference Anode Cathode Function Reference Voltage Ground Input Supply Voltage TL431Z ELECTRICAL CHARACTERISTICS (TA=25℃, unless otherwise specified) CHARACTERISTIC SYMBOL TEST CONDITION TL431CZ MIN. 2.483 2.47 2.44 TYP. 2.495 2.495 2.495 3 -1.4 -1.0 1.8 0.4 MAX. 2.507 2.52 2.55 17 -2.7 -2.0 4.0 1.2 UNIT Reference Input Voltage VREF VKA =VREF, IK =10mA TL431AZ TL431Z V Deviation of Reference Input Voltage Ratio of Change in Reference Input Voltage to the Change in Cathode Voltage Reference Input Current Deviation of Reference Input Current Minimum Cathode Current for Regulation Off-State Cathode Current Dynamic Impedance ΔVREF/ΔT VKA = VREF, IK =10mA TA =Full Range ΔVKA=10V -VREF mV ΔVREF/ΔVKA IREF ΔIREF/ΔT IK =10mA ΔVKA=36V-10V IKA=10mA, R1=10㏀, R2=∞ IK =10mA, R1=10㏀, R2=∞ TA =Full Range VKA= VREF VKA=42V, VREF=0 VKA= VREF, IK =1mA~100mA f ≤ 1kHz 0.17 0.27 mV/V uA uA IK(MIN) IKOFF ZKA 0.5 0.9 0.5 mA uA Ω 2009 – Obsolete -3- HTC PROGRAMMABLE PRECISION SHUNT REGULATOR TEST CIRCUITS TL431Z/AZ/CZ [ Fig 1. Test circuit for VKA = VREF ] [ Fig 2. Test circuit for VKA ≥ VREF ] [ Fig 3. Test circuit for IKA (OFF) ] 2009 – Obsolete -4- HTC PROGRAMMABLE PRECISION SHUNT REGULATOR TL431Z/AZ/CZ The deviation parameters ΔVREF/ΔT and ΔIREF/ΔT are defined as the differences between the maximum and minimum values obtained over the recommended temperature range. The average full-range temperature coefficient of the reference voltage, αVREF, is defined as : Where : ΔTA is the recommended operating free-air temperature range of the device. αVREF can be positive or negative, depending on whether minimum VREF or maximum VREF, respectively, occurs at the lower temperature. Example : Maximum VREF=2496mV at 30℃, maximum VREF=2492mV at 0℃, VREF=2495mV at 25℃, ΔTA=70℃ for TL431CZ. aVREF ⎛ 4mV ⎞ 6 ⎜ ⎟ × 10 23 ppm 2495mV ⎠ =⎝ ≈ 70°C °C Because minimum VREF occurs at the lower temperature, the coefficient is positive. Calculating Dynamic Impedance The dynamic impedance is defined as : Z KA = ΔVKA ΔI KA When the device is operating with two external resistors, the total dynamic impedance of the circuit is given by : Z' = R1 ⎞ ΔV ⎛ ≈ Z KA ⎜1 + ⎟ R2 ⎠ ΔI ⎝ 2009 – Obsolete -5- HTC PROGRAMMABLE PRECISION SHUNT REGULATOR TYPICAL OPERATING CHARACTERISTICS REFERENCE VOLTAGE vs JUNCTION TEMPERATUR TL431Z/AZ/CZ PULSE RESPONS 2.501 2.500 VREF-Reference Voltage (V) Input & Output Voltage (V) VKA=VREF IKA=10mA 6 5 4 3 2 1 0 Output Input 2.499 2.498 2.497 2.496 2.495 2.494 2.493 2.492 0 20 40 60 80 100 120 VKA=VREF IKA=10mA TA=25℃ VREF=2.495V ± 0.5% -1 0 1 2 3 4 5 6 7 8 TJ-Junction Temperature (℃) t-Time (us) CATHODE CURRENT vs CATHODE VOLTAGE CATHODE CURRENT vs CATHODE VOLTAGE 0.15 0.13 IKA-Cathode Current (mA) VKA=VREF TA=25℃ IKA-Cathode Current (uA) 800 VKA=VREF TA=25℃ 0.10 0.08 0.05 0.03 0.00 -0.03 -0.05 -0.08 -0.10 600 400 200 0 -2.0 -1.0 0.0 1.0 2.0 3.0 -200 -1.0 0.0 1.0 2.0 3.0 VKA-Cathode Voltage (V) VKA-Cathode Voltage (V) T.B.D 2009 – Obsolete -6- HTC PROGRAMMABLE PRECISION SHUNT REGULATOR APPICATION INFORMATION 1. Shunt Regulator TL431Z/AZ/CZ TL431Z Note A : R Should provide cathode current 1mA to the TL431Z at minimum VI(BATT) 2. Precision High-Current Series Regulator TL431Z Note A : R Should provide cathode current≥1mA to the TL431Z at minimum VI(BATT) 3. Output Control of a Three-Terminal Fixed Regulator TL431Z 2009 – Obsolete -7- HTC PROGRAMMABLE PRECISION SHUNT REGULATOR 4. High-Current Shunt Regulator TL431Z/AZ/CZ TL431Z 5. Precision 5-V 1.5A Regulator TL431Z 6. Efficient 5-V Precision Regulator TL431Z NOTE A : RB Should provide cathode current≥1mA to the TL431Z. 2009 – Obsolete -8- HTC PROGRAMMABLE PRECISION SHUNT REGULATOR 7. PWM Converter With Reference TL431Z/AZ/CZ TL431Z 8. Voltage Monitor TL431Z NOTE A : R3 and R4 are selected to provide the desired LED intensity and cathode current ≥1mA to the TL431Z at the available VI(BATT). 9. Delay Timer TL431Z 2009 – Obsolete -9- HTC PROGRAMMABLE PRECISION SHUNT REGULATOR 10. Precision Current Limiter TL431Z/AZ/CZ TL431Z 11. Precision Constant-Current Sink TL431Z 2009 – Obsolete - 10 - HTC
431Z
1. 物料型号: - TL431Z:TO-92封装 - TL431-AZ:SO-89封装 - TL431-CZ:SO-89封装 - 431Z:SOT-23 3L封装 - 431Z:SOT-89 3L封装

2. 器件简介: TL431Z是一款三端可调分流调节器,通过两个外部电阻在约2.5V的参考电压下可编程输出电压高达40V。该器件具有0.2Ω的典型动态输出阻抗,并且能够在-40℃至+125℃的温度范围内工作。

3. 引脚分配: - 引脚1:参考电压(Reference) - 引脚2:阳极(Anode),接地 - 引脚3:阴极(Cathode),输入供电电压

4. 参数特性: - 可编程输出电压至40V - 保证0.5%的参考电压公差 - 低动态输出阻抗(典型值0.2Ω) - 阴极电流范围(连续)-100mA至150mA - 等效全温度范围的温度系数为50PPM/℃ - 快速开启响应

5. 功能详解: TL431Z可用作分流调节器、精密高电流系列调节器、高电流分流调节器、PWM转换器的参考电压监控、精密电流限制器等。

6. 应用信息: 文档提供了多个应用示例,包括分流调节器、精密高电流系列调节器、三端固定调节器的输出控制、高电流分流调节器、5V 1.5A调节器、高效5V精密调节器、带有参考电压的PWM转换器、电压监控和延时定时器、精密电流限制器等。

7. 封装信息: - TO-92封装 - SOT-89封装 - SOT-23封装

很抱歉,暂时无法提供与“431Z”相匹配的价格&库存,您可以联系我们找货

免费人工找货