Automotive Relays
Plug-in Mini ISO Relays
Power Relay F4
■ Pin assignment similar to ISO 7588 part 1
■ Plug-in or PCB terminals
Customized versions on request
– 24VDC versions with contact gap >0.8mm
– 48VDC version on request
– Integrated components (e.g. resistor, diode)
– Customized marking/color
– Special covers (e.g. notches, release features, brackets)
– Various contact arrangements and materials
– For latching (bistable) version refer to Power Relay F7 A Latching
– For shrouded/weatherproof dust cover versions refer to
Shrouded Power Relay F4 A and F4
F134co_fcw1
Typical applications
Cross carline up to 40A for example: ABS control, blower fans, car alarm,
cooling fan, Electric Power Steering, energy management, engine control,
fuel pump, heated front screen, lamps: front, rear, fog light, main switch/
supply relay, valves, wiper control.
Contact Data
Contact arrangement
1
form A, 1 NO/1 NO (2x87)
1 form U, 2 NO
1 form C, 1 CO
Contact gap
>0.8mm
>0.8mm
Rated voltage 12VDC
24VDC 12VDC 24VDC 24VDC 12VDC 24VDC
24VDC1)
Limiting continuous current
NO NO
NO
NO
NO
NO/NC
NO/NC
NO/NC
23°C
60A 60A
2x32A
2x32A
2x32A
60/45A
60/45A
60/45
85°C
40A 40A
2x25A
2x25A
2x25A
40/30A
40/30A
40/30A
125°C
17A 17A
2x11A
2x11A
2x11A
17/12A
17/12A
17/12A
Limiting making current2)
NO/NC
120A 120A
2x100A
2x100A
2x100A
120/45A
120/45A 120/45A
Limiting breaking current
NO/NC
60A 20A
2x40A
2x15A
2x30A
60/40A
20/15A
30/20
Limiting short-time current
overload current, ISO 8820-33):
1.35 x 40A, 1800s
1.35 x 40A, 1800s
1.35 x 40A, 1800s
2.00 x 40A, 5s
2.00 x 40A, 5s
2.00 x 40A, 5s
3.50 x 40A, 0.5s
3.50 x 40A, 0.5s
3.50 x 40A, 0.5s
6.00 x 40A, 0.1s
6.00 x 40A, 0.1s
6.00 x 40A, 0.1s
Jump start test
ISO 16750-1 24VDC for 5min conducting nominal current at 23°C
Contact material
silver based
Min. recommended contact load4)
1A at 5VDC
Initial voltage drop
NO contact at 10A, typ./max. 15/200mV 15/200mV
2x15/200mV 2x15/200mV
2x15/200mV 15/200mV
15/200mV
15/200mV
NC contact at 10A, typ./max.
20/250mV
20/250mV
20/250mV
Frequency of operation
at nominal load
6 ops./min (0.1Hz)
Operate/release time typ.
7/2ms5)
Electrical endurance6)
resistive load, NO contact >2x105 ops. >1x105 ops. >2x105 ops.
>1x105 ops.
>1x105 ops. >2x105 ops. >1x105 ops. >1x105 ops.
40A, 14VDC 20A, 28VDC 2x25A, 14VDC 2x15A, 28VDC 2x20A, 28VDC 40A, 14VDC 20A, 28 VDC 30A, 28 VDC
resistive load, NC contact
>5x105 ops.
10A, 28 VDC
Mechanical endurance
DC coil
>1x106 ops.
1) Special high performance 24VDC version with contact gap >0.8mm.
2) The values apply to a resistive or inductive load with suitable spark suppression and at maximum 14VDC for 12VDC or 28VDC for 24VDC load voltages. For a load current duration of
maximum 3s for a make/break ratio of 1:10.
3) Current and time are compatible with circuit protection by a typical automotive fuse. Relay will make, carry and break the specified current.
4) See chapter Diagnostics of Relays in our Application Notes or consult the internet at http://relays.te.com/appnotes/
5) For unsuppressed relay coil. Any parallel device to the coil will increase the release time.
6) Electrical endurance data is not valid for diode versions. Any diode or pn-junction parallel to the coil (internal or external) will significantly decrease the electrical lifetime, especially when
used for inductive loads.
2021-04, Rev. 2104
www.te.com
© 2021 TE Connectivity.
Datasheets and product specification according to IEC 61810-1 and to be used only
together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
https://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ section, application notes and all specifications
are subject to change.
1
Automotive Relays
Plug-in Mini ISO Relays
Power Relay F4 (Continued)
Max. load DC breaking capacity
Insulation Data
Initial dielectric strength
between open contacts
between contact and coil
between adjacent contacts
Load dump test
ISO 7637-1 (12VDC), test pulse 5
ISO 7637-2 (24VDC), test pulse 5
500Vrms
500Vrms
500Vrms
Vs=+86.5VDC
Vs=+200VDC
Other Data
Load limit curve 1: arc extinguishes during transit time (CO contact).
Load limit curve 2: safe shutdown, no stationary arc (NO contact).
Load limit curves measured with low inductive resistors verified for 1000 switching events.
Coil Data
Rated coil voltage
12/24VDC
Coil versions, DC coil
Coil
Rated
Operate
Release
Coil
Rated coil
code voltage voltage voltage
resistance7) power7)
VDC VDC VDC
Ω±10% W
052 12 7.2 1.6 90 1.6
053 24 14.4 3.2 324 1.8
056 24 16.0 4.0 268 2.1
165 24 14.4 2.4 288 2.0
All figures are given for coil without pre-energization, at ambient temperature +23°C.
7) Without components in parallel.
Coil operating range
TE0701-J1
EU RoHS/ELV compliance
compliant
Ambient temperature DC coil
-40 to +125°C
Protection to heat and fire
UL94-HB or better8)
Climatic cycling with condensation
EN ISO 6988 6 cycles, storage 8/16h
Temperature cycling
IEC 60068-2-14, Nb 10 cycles, -40/+85°C (5°C/min)
Damp heat cyclic
IEC 60068-2-30, Db, Variant 1 6 cycles, upper air temp. 55°C
Damp heat constant
IEC 60068-2-3, Ca
56 days
Category of environmental protection,
IEC 61810
RTI – dustproof
Degree of protection, IEC 60529
IP54 (dustproof)
Corrosive gas
IEC 60068-2-42 10±2cm3/m3 SO2, 10 days
IEC 60068-2-43 1±0.3cm3/m3 H2S, 10 days
Vibration resistance (functional)
IEC 60068-2-6 (sine sweep)
10 to 500Hz > 5g9)
Shock resistance (functional)
IEC 60068-2-27 (half sine)
11ms >20g9)
Drop test, free fall
IEC 60068-2-32
1m onto concrete
Terminal type
plug-in, QC/PCB
Cover retention
pull force
150N
push force
200N
Terminal retention
pull force
100N
push force
100N
resistance to bending, force applied to front10) 10N
resistance to bending, force applied to side10) 10N
torque
0.3Nm
Weight
approx. 35g (1.2oz)
Packaging unit
plug-in/PCB
315 pcs.
plug-in with bracket
200 pcs.
08) Refers to used materials.
09) No change in the switching state >10μs. Valid for NC contacts, NO contact values
higher.
Does notsignificantly
take into account
10) Values apply 2mm from the end of the terminal. When the force is removed, the
the temperature rise due to
terminal must not have moved by more than 0.3mm.
the contact current
E = pre-energization
Accessories
For details see datasheet Connectors for Mini ISO Relays
Does not take into account the temperature rise due to the contact current E=preenergization..
2
2021-04, Rev. 2104
www.te.com
© 2021 TE Connectivity.
Datasheets and product specification according to IEC 61810-1 and to be used only
together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
https://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ section, application notes and all specifications
are subject to change.
Automotive Relays
Plug-in Mini ISO Relays
Power Relay F4 (Continued)
Terminal Assignment
NOR
1 form A, 1 NO
with resistor
NO
1 form A, 1 NO
NOR_SD
1 form A, 1 NO
with resistor & serial diode
NO_2x87
1 form A, 1 NO (2x87)
NOR_2x87
1 form A, 1 NO (2x87)
with resistor
85
87
85
87
85
87 87
85
87 87
86
30
86
30
86
30
86
30
CO
1 form C, 1 CO
85
86
COR
1 form C, 1 CO
with resistor
87 87a
30
85
86
COD
1 form C, 1 CO
with diode
87 87a
85
30
86
DNOR
1 form U, 2 NO
with resistor
DNO
1 form U, 2 NO
87 87a
30
85
87 87b
85
87 87b
86
30
86
30
Dimensions
View of the terminals (bottom view)
Power Relay F4 with quick connect (QC) terminals
Measurement
reference plane
5x
0.3
TE1088-R1
For the make contact (2x87), pin 87a = 87;
for the double make contact, pin 87a = 87b.
TE1093-S1
Power Relay F4 with PCB terminals
View of the terminals (bottom view)
4.5 ±0.3
17.9 ±0.25
Mounting hole layout (bottom view)
2.7 ±0.5
8.0 ±0.25
*) For the make contact (2 x pin 87),
pin 87a = 87.
For the twin make contact,
pin 87a = 87b.
16.9 ±0.3
TE0907-B1
TE1655-H1
8.4 ±0.25
TE1654-91
2021-04, Rev. 2104
www.te.com
© 2021 TE Connectivity.
For the make contact (2x87), pin 87a = 87;
for the double make contact, pin 87a = 87b.
Datasheets and product specification according to IEC 61810-1 and to be used only
together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
https://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ section, application notes and all specifications
are subject to change.
3
Automotive Relays
Plug-in Mini ISO Relays
Power Relay F4 (Continued)
Product code structure
Typical product code V23134
-A
0
052 -C643
Type
V23134 Power Relay F4
Contact
arrangement
A
1 form C, 1 CO
C
1 form A, 1 NO (2x87)
B
1 form A, 1 NO M
1 form U, 2 NO
Cover
0
Standard 1
Bracket at terminal 30 ISO
2
Bracket at terminal 86 ISO
Coil
052 12VDC 053
24VDC
056
24VDC (contact gap >0.8mm)
165 24VDC (contact gap >0.8mm)
Terminal/arrangement
C642 Plug-in/NO C643
Plug-in/CO
G242
PCB/NO G243
PCB/CO
Xnnn
Customized (nnn: version number)
Production in Europe (only)
Product code
Arrangement
V23134-A0052-C643
1 form C, 1 CO
V23134-A0052-G243
V23134-A0052-X278
V23134-A0053-C643
V23134-A0053-G243
V23134-A0056-X4322)
V23134-A0056-X4332)
V23134-A1052-C643
V23134-A1052-X2944)
V23134-A1053-C643
V23134-A1053-X2954)
V23134-B0052-C642
1 form A, 1 NO
V23134-B0052-G242
V23134-B0052-X2706)
V23134-B0052-X506
V23134-B0053-C642
V23134-B0053-G242
V23134-B1052-C642
V23134-B1053-C642
V23134-B1053-X2964)
V23134-C0052-C642
1 form A, 1 NO (2x87)
V23134-C0053-C642
V23134-C1052-C642
V23134-C1052-X2804)5)
V23134-C1053-C642
V23134-M0052-C642
1 form U, 2 NO
V23134-M0052-G242
V23134-M0053-C642
V23134-M0053-G242
V23134-M0165-X5392)
V23134-M1052-C642
V23134-M1053-C642
Version
Standard
Bracket
Standard
Coil suppr.
Circuit1)
CO
12VDC
R 560Ω
COR
CO
24VDC
D (cathode 86)
R 1200Ω
COD
COR
CO
COR
CO
COR
NO
12VDC
NOR
NOR_SD3)
NO
24VDC
R 560Ω
R 1200Ω
R 680Ω
R 560Ω
Bracket
Standard
Bracket
R 1200Ω
NOR
NO_2x87
R 560Ω
NOR_2x87
NO_2x87
DNO
Standard
Coil
Contact mat.
Silver based
R 1200Ω
DNOR
DNO
Plug-in, QC
PCB
Plug-in, QC
PCB
Plug-in, QC
12VDC
24VDC
PCB
Plug-in, QC
PCB
Plug-in, QC
12VDC
24VDC
12VDC
24VDC
12VDC
24VDC
12VDC
Plug-in, QC
PCB
Plug-in, QC
PCB
Plug-in, QC
24VDC
Bracket
Terminals
12VDC
24VDC
Part number
2-1393302-2
2-1393302-3
4-1393302-1
5-1393302-1
5-1393302-2
1-1414167-0
1-1414168-0
5-1393302-8
6-1393302-0
6-1393302-3
6-1393302-4
7-1393302-5
7-1393302-7
1-1414099-0
4-1414992-3
1393303-9
1-1393303-0
3-1393303-4
3-1393303-7
3-1393303-8
3-1393303-9
4-1393303-4
4-1393303-7
4-1393303-8
5-1393303-0
5-1393304-6
5-1393304-7
6-1393304-7
6-1393304-8
3-1904117-6
7-1393304-1
7-1393304-4
1) See terminal assignment diagrams.
4) No hole in terminal 30.
2) Special feature: contact gap >0.8mm.
5) No hole in terminal 87a.
3) Serial diode.
6) No holes in all terminals.
Other types on request.
This list represents the most common types and does not show all variants covered by this datasheet.
Production in Asia (only)
Product code
Arrangement
V23134-B0052-C642
V23134-B0052-X2702)
V23134-B0053-C642
1 form A, 1 NO
Version
Standard
Coil suppr.
R 680Ω
Circuit1)
NO
NOR
NO
Coil
12VDC
Contact mat.
Silver based
24VDC
Terminals
Plug-in, QC
Part number
7-1904094-0
7-1904094-1
7-1904094-5
1) See terminal assignment diagrams.
2) No holes in all terminals.
Other types on request.
This list represents the most common types and does not show all variants covered by this datasheet.
4
2021-04, Rev. 2104
www.te.com
© 2021 TE Connectivity.
Datasheets and product specification according to IEC 61810-1 and to be used only
together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
https://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ section, application notes and all specifications
are subject to change.
