1-1469820-2

4 RELEASED FOR PUBLICATION THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 2 3 1 20 LOC BY - REVISIONS DIST CC ALL RIGHTS RESERVED. 00 P LTR DESCRIPTION C DATE REVISED PER ECR-12-009949 DWN APVD F.L rev_date_1 F.Y D D 1 PCB HOLE DIMENSIONS: DRILLED HOLE = 0.64 # 0.02 mm FINISHED HOLE = 0.55 mm REF Cu THICKNESS = 25-50 um WITH EITHER PLATING THICKNESS: HASL Sn Pb = 4-10 um OR IMMERSION Sn = MIN 0.5 um OR OSP = 0.2-0.5 um OR IMMERSION Au/Ni = 0.5-1.2 um Au OVER 3.0-7.0 um Ni OR IMMERSION Ag = 0.1 um MIN 2 MATERIAL: HOUSING- LCP, 94V-O RATED, COLOR- BLACK CONTACTS- COPPER ALLOY WEAR PLATE- STAINLESS STEEL INSULATION FILM- MYLAR 3 FINISH- MATING AREA- 0.76 um MIN GOLD OR 0.64 um MIN PALLADIUM-NICKEL OVER 1.27um MIN NICKEL COMPLIANT PIN AREA- 0.5 um MATTE TIN OVER 1.27 um NICKEL. POS #1 72 C 65.15 0.2 4 0.05 5 B 10 CONNECTOR MARKED WITH PART NUMBER AND DATE CODE. DATUMS AND BASIC DIMENSIONS ESTABLISHED BY CUSTOMER. 6 CONTACT AREA LUBRICATED WITH BELLCORE APPROVED LUBRICANT. TECHNICAL REFERENCE GR-1217-CORE ISSUE 1, NOVEMBER 1995. 7 REFER TO TE CONNECTIVITY APPLICATION SPECIFICATION 114-13180 FOR SPECIFIC APPLICATION RELATED INFORMATION. 8 FINISH- MATING AREA- 0.76 um MIN GOLD OR 0.64 um MIN PALLADIUM-NICKEL OVER 1.27um MIN NICKEL COMPLIANT PIN AREA- 0.5 um BRIGHT TIN-LEAD OVER 1.27 um NICKEL. 9 WEAR PLATE EXTENDS FROM TOP OF CONNECTOR TO BOTTOM OF SLOT AND IS USED TO ELIMINATE WEAR OF THE HOUSING CAUSED BY THE EDGE OF THE PCB CARD. 10 INSULATION FILM USED WHEN ADDITIONAL INSULATION SPACING IS NEEDED BETWEEN PCB TRACES AND CONTACTS. INSULATION FILM YES 9 WEAR PLATE YES YES 2-1469820-4 3 YES YES 2-1469820-2 8 YES YES 3 YES YES 8 NO YES 3 NO YES FINISH WEAR PLATE ALIGNMENT POSTS YES 8 YES 3 YES ALIGNMENT POST NO 8 NO 12.43 0.13 0.1 0.1 5.8 0.1 MEASURED TO BOTTOM OF CARD SLOT VIEWS FOR PART NUMBERS WITH INSULATION FILM 2-1469820-1 THRU 2-1469820-4 NO INSULATION FILM TOLERANCES UNLESS OTHERWISE SPECIFIED: DIMENSIONS: mm 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES MATERIAL 8 NO THIS DRAWING IS A CONTROLLED DOCUMENT. FINISH 1471-9 (3/11) NO SUPERCEDED BY 1-1469820-2 12.3 3 NO SUPERCEDED BY 1-1469820-3 SUPERCEDED BY 1-1469820-1 A NO SUPERCEDED BY 1-1469820-4 0.1 0.5 0.13 0.013 0.0001 3 YES D. SZCZESNY - - - NAME 108-2254 WEIGHT SIZE - - CUSTOMER DRAWING 1-1469820-2 1-1469820-1 1469820-4 1469820-3 1469820-2 NO 1469820-1 PART NUMBER TE Connectivity APPLICATION SPEC 114-13180 1-1469820-3 NO NO APVD 1-1469820-4 NO NO - 2-1469820-1 NO YES CHK 2-1469820-3 NO YES 31MAR06 DWN NO YES PRODUCT SPEC - B 8 NO 7.4 C A CARD EDGE CONNECTOR, VERTICAL MICRO TCA CAGE CODE A2 00779 DRAWING NO 1469820 SCALE 3:1 SHEET 1 RESTRICTED TO OF - 2 REV C 4 RELEASED FOR PUBLICATION THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 2 3 1 20 LOC BY - REVISIONS DIST CC ALL RIGHTS RESERVED. 00 P LTR DESCRIPTION - DATE SEE SHEET 1 DWN APVD - - - -W5 D D HOLES USED FOR PART NUMBERS WITH ALIGNMENT POSTS BSC 2.4 0.1 2 PLC POS #1 POS #170 1.5 C 0.55 REF TYP 1 C AFTER PLATING 31.22 PART NUMBERS 1-1469820-1 1-1469820-3 2-1469820-1 2-1469820-3 WITHOUT POSTS -L- 58.5 69.3 B BSC B 5 4.175 2.25 0.2 PART NUMBERS 1-1469820-2 1-1469820-4 2-1469820-2 2-1469820-4 WITH POSTS CENTER COLUMN OF HOLES ARE GROUND POSITIONS 1.35 1.5 A THIS DRAWING IS A CONTROLLED DOCUMENT. TOLERANCES UNLESS OTHERWISE SPECIFIED: DIMENSIONS: mm 6 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES MATERIAL FINISH 1471-9 (3/11) 0.1 0.1 0.13 0.013 0.0001 31MAR06 DWN D. SZCZESNY CHK - APVD - - - TE Connectivity NAME PRODUCT SPEC 108-2254 APPLICATION SPEC - 114-13180 WEIGHT SIZE - - CUSTOMER DRAWING A CARD EDGE CONNECTOR, VERTICAL MICRO TCA CAGE CODE A2 00779 DRAWING NO 1469820 SCALE 2:1 SHEET 2 RESTRICTED TO OF - 2 REV C