1-1616037-5

HARTMAN Power Switching AC Contactors D25, DH25 and DHR25 Series, Rated up to 100 Amps, 115/200 VAC, 400 Hz Product Facts n 3PDT NO n Gasket sealed or Hermetically sealed n Auxiliary contacts available n Meets many requirements of MIL-PRF-6106 General Characteristics Coil Characteristics Electrical Characteristics Temperature Range — -55°C to +85°C Operating Cycles (Life) at Rated Resistive Load, Min. — 50,000 cycles Operating Cycles (Life) Mechanical, Min. — 100,000 cycles Dielectric Strength — All Circuits to Ground — 1,500 Vrms Circuit to Circuit — 1,500 Vrms Coil to Ground and Aux. Contacts — 1,000 Vrms Insulation Resistance, Initial — 100 megohm min. Altitude — D-25 — 50,000 ft. DH-25, DHR-25 — 80,000 ft. Weight, Max. — 2.20 to 2.75 lbs Sinusoidal Vibration — 10 G @ 70 to 2,000 Hz Shock, Max. — 25 G Operate Time @ Nom. Voltage, Max. — 35 msec Release Time @ Nom. Voltage, Max. — 35 msec Bounce Time @ Nom. Voltage, Max. — 5 msec Duty Cycle — VAC 400 Hz — AC (Type A, See diagram below) Vdc — Continuous (Type B, See diagram below) Vdc — Continuous with suppression (Type C, See diagram below) Operating Voltage, Nom. — VAC 400 Hz — 115 VAC Vdc — 28 Vdc Pickup Voltage @ 25°C, Max. — VAC 400 Hz — 103.5 VAC Vdc — 18 Vdc Dropout Voltage @ 25°C, Max. — VAC 400 Hz — 5 to 45 VAC Vdc — 1.5 to 7 Vdc Coil Resistance ±20% @ 25°C — VAC 400 Hz — N/A Vdc — 175 Ohms Contact Arrangement — 3PDT NO Rated Operating Voltage — 115/200 VAC, 400 Hz, 3 phase Resistive Rating — 100 Amps Inductive Rating — 100 Amps 6 HARTMAN Power Switching AC Contactors Performance Data Coil Type A — AC B — Continuous C — Continuous with Suppression For factory-direct application assistance, phone 419-521-9500 or fax 419-526-2749. 6–27 Catalog 5-1773450-5 Revised 3-13 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 800 522 6752 Asia Pacific: +86 0 400 820 6015 UK: +44 800 267 666 For additional support numbers please visit www.te.com HARTMAN Power Switching AC Contactors D25, DH25 and DHR25 Series, Rated up to 100 Amps, 115/200 VAC, 400 Hz (Continued) Mounting Style A Mounting Style B For factory-direct application assistance, phone 419-521-9500 or fax 419-526-2749. Mounting Style C 6–28 Catalog 5-1773450-5 Revised 3-13 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 800 522 6752 Asia Pacific: +86 0 400 820 6015 UK: +44 800 267 666 For additional support numbers please visit www.te.com HARTMAN Power Switching AC Contactors D25, DH25 and DHR25 Series, Rated up to 100 Amps, 115/200 VAC, 400 Hz (Continued) Circuit Configurations (Consult factory for other available circuit configurations) Circuit Configuration 1 Circuit Configuration 2 HARTMAN Part Number D-25BD DH-25B DH-25BA DHR-25BG Construction Type Gasket/Vented Hermetically Sealed Hermetically Sealed Hermetically Sealed Circuit Configuration 3 Mounting Style A C B A Coil Type B B B A Circuit Configuration 4 Circuit Config. 1 4 2 3 TE Part Number 1616034-3 1616037-2 1616037-3 1-1616037-5 6 HARTMAN Power Switching AC Contactors For factory-direct application assistance, phone 419-521-9500 or fax 419-526-2749. 6–29 Catalog 5-1773450-5 Revised 3-13 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 800 522 6752 Asia Pacific: +86 0 400 820 6015 UK: +44 800 267 666 For additional support numbers please visit www.te.com