1-1617069-0

KILOVAC Solid State Relays JDS9 Series, AC Relays, 2A/250Vrms Rating _ Input Characteristics Output Characteristics Environmental Characteristics Input Voltage Range — 3.8 – 32 Vdc Pick-up Voltage — 3.8 Vdc Dropout Voltage — 1.5 Vdc I/O Dielectric — 1500 Vrms Max. Output Current (Continuous, 25°C) — 2 Arms Max. Output Voltage — 250 Vrms Peak Over Voltage Rating — 500 Vpk Frequency Range — 40 – 440 Hz Zero Switch Window — 15 Vpk Thermal Resistance — Junction to Ambient — 65°C/Watt Junction to Case — 15°C/Watt Shock — 1500 G’s, 0.5 ms. Vibration — 30 G’s, 10 to 3000 Hz Operating Ambient Temperature — -55 to +110°C + 1 1 10 6 8 .890 MAX (22.6) AC POWER KILOVAC Solid State Relays .300 ± .005 (7.62 ± .127) .530 MAX (13.5) LOAD 6 1 1 8 .100 REF (2.54) .200 REF (5.08) .500 REF (17.7) .140 REF (3.56) Terminal View .600 REF (15.2) .190 MAX (4.83) Product Facts n Hermetically sealed n Thick film hybrid construction n Optically isolated n Zero voltage turn-on n Qualified to MIL–R–28750/9 .270 ± .020 (6.86 ± .51) .850 (21.6) REF .490 REF (12.4) .020 MAX (.508) .017 ± .001 (.432 ± .025) Screening levels: Y level for high reliability applications. P/NJDS9-1Y W level for general purpose applications. P/NS9-1W 3.0 2.8 2.6 2.4 CASE TEMPERATURE AT 32 Vdc INPUT AT 5 Vdc INPUT 2.0 1.8 18 15 1.6 1.4 INPUT CURRENT (mA) LOAD CURRENT (AMPERES) 2.2 AMBIENT TEMPERATURE AT 32 Vdc INPUT AT 5 Vdc INPUT 1.2 1.0 0.8 0.6 0.4 0.2 0.0 12 9 6 3 0 20 30 40 50 60 70 80 90 100 110 120 TEMPERATURE (°C) JDS9 Max. Output Current vs. Temperature 130 0 5 10 15 20 25 30 40 50 60 INPUT VOLTAGE (Vdc) JDS9 Typical Input Current vs. Input Voltage PAGE 15 KILOVAC Solid State Relays JDS9 Series, AC Relays, 2A/250Vrms Rating (Continued) Electrical Specifications (-55°C to +105°C unless otherwise specified) Input Input supply voltage range (Vcc) 3.8 - 32 Vdc Input current (max.) @ 5Vdc 15mAdc Must turn-on voltage 3.8Vdc Must turn-off voltage 1.5Vdc Reverse voltage protection -32Vdc I/O Dielectric strength (min.) Insulation resistance (min.) @ 500Vdc Capacitance (max.) 1,500V rms/60 Hz. 109 ohms 10pF Output Output current rating (max.) 2A rms (Fig. 2, Note 1) Surge current (max.), 16ms @ 25°C (max.) 8A pk (Fig. 1, Note 3) Continuous load voltage (max.) Transient blocking voltage (max.) Frequency range 250V rms 500V pk 40 - 440 Hz. Output voltage drop (max.) @ 1A load current 1.5V rms Off-state leakage current (max.) @ 250V rms/400 Hz. 1mA rms Turn-on time (max.) 1/2 cycle Turn-off time (max.) Off-state dv/dt (min.), with snubber Zero voltage turn-on window (max.) Wave distortion (max.) 1 cycle 200V /µs (Note 2) 10V 4V rms Output chip junction temperature (max.) 130°C Thermal resistance (max.), junction to ambient 65°C/W Thermal resistance (max.), junction to case 15°C/W Notes 1. Operation at elevated load currents up to 2 amps is dependent on the use of suitable heatsink to maintain case temperature. 2. Recommended output snubber: R = 100 ohms (1/2 W), C = .01µF (600V). 3. Heating of output chip during and after a surge may cause loss of output blocking capability until junction temperature falls below maximum rating. AEROSPACE, DEFENSE & MARINE /// HIGH PERFORMANCE RELAYS