1-1617109-1

CII Low Signal Relays Double Pole, Electrically Held, 1 Amp and Less (Continued) HM, HMD, HS, HSD HM, HS Standard / Sensitive TO-5 Commercial Relay HMD, HSD Standard / Sensitive TO-5 Diode Suppressed Commercial Relay – Terminal View Product Facts + Terminal View Product Facts n Hermetically sealed n Suppression Diode n Spreader Pads n Hermetically sealed n Excellent RF switching n Spreader Pads n Excellent RF switching Electrical Characteristics Electrical Characteristics Contact Arrangement — 2 Form C (DPDT) Contact Material — Stationary — Gold/platinum/palladium/silver alloy (gold plated) Moveable — Gold/platinum/palladium/silver alloy (gold plated) Contact Resistance — Before Life — 100 milliohms max. (measured @ 10 mA @ 6 Vdc) After Life — 200 milliohms max. (measured @ 1 A @ 28 Vdc) Mechanical Life Expectancy — 1 million operations Coil Voltage — 5 to 30 Vdc (HM/HMD) 5 to 48 Vdc (HS/HSD) Coil Power — HM/HMD — 675 mW max. @ 25°C HS/HSD — 565 mW max. @ 25°C Duty Cycle — Continuous Pick-up Voltage — Approximately 70% of nominal coil voltage Pick-up Sensitivity — HM/HMD — 180 mW max. @ 25°C HS/HSD — 90 mW max. @ 25°C .370 (9.40)DIA MAX .031 ± .003 (0.79) .035 ± .010 (0.89) .200 DIA (5.08) GROUND PIN (OPTIONAL) 36º + 3º Header Contact Ratings Contact Load 1.0 A @ 28 Vdc 250 mA @ 115 Vac, 60 Hz & 400 Hz 100 mA @ 115 Vac, 60 Hz & 400 Hz 0.2 A @ 28 Vdc 0.1 A @ 28 Vdc 30 µA @ 50 mVdc Type Resistive Resistive (Case not grounded) Resistive Inductive (0.32 Henry) Lamp Low Level Operations Min. 100,000 100,000 100,000 100,000 100,000 1,000,000 1-14 Catalog 5-1773450-5 Revised 3-13 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 800 522 6752 Asia Pacific: +86 0 400 820 6015 UK: +44 800 267 666 For additional support numbers please visit www.te.com CII Low Signal Relays Double Pole, Electrically Held, 1 Amp and Less (Continued) HM, HMD, HS, HSD Standard Coil Data (Continued) Operating Characteristics Timing — Operate Time — HM/HMD — 4.0 ms max. HS/HSD — 6.0 ms max. Release Time — HM — 3.0 ms max. HS — 3.0 ms max. HMD — 6.0 ms max. (suppression diode) HSD — 7.5 ms max. (suppression diode) Dielectric Withstanding Voltage — Between Open Contacts — 350 Vrms 60 Hz Between Adjacent Contacts — 350 Vrms 60 Hz Between Contacts & Coil — 350 Vrms 60 Hz Insulation Resistance — 1,000 megohms @ 500 Vdc HM/HMD HS/HSD Coil Resistance in Ohms ±20% @ 25°C 50 98 220 390 880 1,560 2,500 100 200 400 850 1,600 3,300 6,500 11,000 Pickup Voltage Vdc (max.) @ 25°C 3.6 4.2 6.5 8.4 13.0 17.0 22.0 3.5 4.5 6.8 9.0 13.5 18.0 24.0 32.0 Nom. Coil Power (mW) @ 25°C 500 367 368 369 368 450 360 250 180 203 169 203 213 199 209 Max. Coil Voltage Coil Desig. 5.8 8.0 12.0 16.0 24.0 32.0 36.0 7.5 10.0 15.0 20.0 30.0 40.0 57.0 75.0 5 6 9 12 18 26 30 5 6 9 12 18 26 36 48 1 CII Low Signal Relays Nom. Coil Voltage (Vdc) 5.0 6.0 9.0 12.0 18.0 26.5 30.0 5.0 6.0 9.0 12.0 18.0 26.5 36.0 48.0 .335 (8.51) DIA MAX .335 (8.51) DIA MAX Environmental Characteristics .385 (9.78) MAX .275 (6.99) MAX Temperature Range — -55°C to +85°C Weight — HM/HMD — 0.09 oz. (2.55 gms) 0.099 oz. (2.80 gms) w/ spreader pad HS/HSD — 0.12 oz. (3.40 gms) 0.129 oz. (3.45 gms) w/ spreader pad Vibration Resistance — 10 G’s, 10 to 500 Hz Shock Resistance — 30 G’s, 6 ±1 ms TERMINAL B .750 MIN (19.05) (Length excludes mounting pad) GROUND PIN (OPTIONAL) GROUND PIN (OPTIONAL) .017 +.002 -.001 (0.43) DIA .370 (9.40) DIA MAX HM/HMD Enclosure HS/HSD Enclosure Semiconductor Characteristics Diode — 100 Vdc peak inverse voltage (PIV) 1.0 Vdc max. transient voltage .017 +.002 -.001 (0.43) DIA .370 (9.40) DIA MAX .103 (2.62) .156 (3.96) .014±.003 (0.36) .370 (9.40) SQ MAX .395 (10.03) SQ MAX .100 (2.54) 0.47 (1.19) DIA .150 (3.81) .100 (2.54) .100 (2.54) .140 – .175 DIA (3.56 – 4.45) 1 2 3 Spreader and Mounting Pads Ordering Instructions Catalog-selected Relays: The catalog number is derived by choosing the proper CODE for each of the relay characteristics in the order in which the codes are listed. Specifying a Part Number Example: Type Diodes Ground Pin Spreader/Mounting Pads Coils Terminals HM D X 3 -26 B 1-15 Catalog 5-1773450-5 Revised 3-13 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 800 522 6752 Asia Pacific: +86 0 400 820 6015 UK: +44 800 267 666 For additional support numbers please visit www.te.com