1-1617146-2

CII Low Signal Relays Double Pole, Electrically Held, 1 Amp and Less (Continued) MGA, MGAD, MGADD MGA Standard .100 Grid High Performance Relay Qualified to MIL-R-39016/17 MGAD Standard .100 Grid Diode Suppressed High Performance Relay MGADD Standard .100 Grid Diode Suppressed/Protected High Performance Relay Qualified to MIL-R-39016/18 Qualified to MIL-R-39016/19 X1 A2 B2 A2 A1 B1 A1 B3 A3 A3 X2 Terminal View Contact Arrangement — 2 Form C (DPDT) Contact Material — Stationary — Gold/platinum/palladium/silver (gold plated) Moveable — Gold/platinum/palladium/silver (gold plated) Contact Resistance — Before Life — 100 milliohms max. (measured @ 10 mA @ 6 Vdc) After Life — 200 milliohms max. (measured @ 1 A @ 28 Vdc) Mechanical Life Expectancy — 1 million operations Coil Voltage — 5 to 26.5 Vdc Coil Power — 660 mW max. @ 25°C Duty Cycle — Continuous Pick-up Voltage — Approximately 50% of nominal coil voltage Pick-up Sensitivity — 130 mW max. @ 25°C X2 B2 A2 B1 A1 B3 A3 + X1 Terminal View Product Facts Electrical Characteristics – Product Facts n Suppression diode n High shock & vibration ratings n Hermetically sealed n High shock & vibration ratings n Mounting pads n Excellent RF switching Mounting pads Excellent RF switching B2 B1 B3 + X1 Product Facts Hermetically sealed n X2 Terminal View n n – n Suppression & protection diodes n Hermetically sealed n High shock & vibration ratings n Mounting pads n Excellent RF switching Contact Ratings Contact Load 1.0 A @ 28 Vdc 250 mA @ 115 Vac, 60 Hz & 400 Hz 100 mA @ 115 Vac, 60 Hz & 400 Hz 0.2 A @ 28 Vdc 0.1 A @ 28 Vdc 30 µA @ 50 mVdc 0.1 A @ 28 Vdc Type Resistive Resistive (case not grounded) Resistive Inductive (0.32 Henry) Lamp Low Level Intermediate Current .335 (8.51) SQ MAX Operations Min. 100,000 100,000 100,000 100,000 100,000 1,000,000 50,000 .375 (9.40) SQ MAX .035 (0.98) .031± .003 (0.79) .280 (7.11) MAX .280 (7.11) MAX .100 (2.54) TERMINALS C .500 MIN (12.7) P .187±.010 (4.75 ±.25) (Length excludes mounting pad) MGA .017 +.002 (0.43) DIA -.001 8 PINS .370 (9.40) SQ MAX MGA/MGAD/MGADD Enclosure .100 GROUND PIN (OPTIONAL) . + (2.54) (0.43) DIA 9 PINS MGA/MGAD/MGADD Header 1-16 Catalog 5-1773450-5 Revised 3-13 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 800 522 6752 Asia Pacific: +86 0 400 820 6015 UK: +44 800 267 666 For additional support numbers please visit www.te.com CII Low Signal Relays Double Pole, Electrically Held, 1 Amp and Less (Continued) Operating Characteristics Environmental Characteristics Semiconductor Characteristics (Continued) Timing — Operate Time — 2.0 ms max. Release Time — MGA — 1.5 ms max. MGAD/MGADD — 4.0 ms max. (suppression diode, protection/ suppression diodes) Contact Bounce — 1.5 ms max. Dielectric Withstanding Voltage — Between Open Contacts — 500 Vrms 60 Hz Between Adjacent Contacts — 500 Vrms 60 Hz Between Contacts & Coil — 500 Vrms 60 Hz Insulation Resistance — 10,000 megohms min. @ 500 Vdc 1,000 megohms @ 500 Vdc (coil to case @ +125°C) Temperature Range — -65°C to +125°C Weight — 0.09 oz. (2.55 gms) 0.129 oz. (3.45 gms) w/ mounting pad attached Vibration Resistance — 30 G’s, 10 to 3,000 Hz Shock Resistance — 75 G’s, 6 ±1 ms max. QPL Approval — MIL-R-39016/17 (JMGA) MIL-R-39016/18 (JMGAD) MIL-R-39016/19 (JMGADD) Diode — 100 Vdc peak inverse voltage (PIV) 1.0 Vdc max. transient voltage 1 CII Low Signal Relays MGA, MGAD, MGADD .014 ±.003 (0.36) 0.47 (1.19) DIA .140– .175 DIA (3.56–4.45) MGA/MGAD/MGADD Mounting Pad Coil Data Nom. Coil Voltage (Vdc) MGA/MGAD 5.0 6.0 9.0 12.0 18.0 26.5 MGADD 5.0 6.0 9.0 12.0 18.0 26.5 Coil Resistance in Ohms ±10% @ 25°C (Note) Coil Circuit Current mA (Max.) (Note) Coil Circuit Current mA (Min.) (Note) Pickup Voltage Vdc (Max.) @ 25°C Pickup Voltage Vdc (Max.) @ 125°C Drop-Out Voltage Vdc (Min.) @ 25°C Drop-Out Voltage Vdc (Min.) @ -65°C Nom. Coil Power (mW) @ 25°C Max. Coil Voltage Coil Desig. 50 98 220 390 880 1,560 n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a 2.7 3.5 5.3 7.0 10.5 14.2 3.5 4.5 6.8 9.0 13.5 18.0 0.22 0.28 0.54 0.63 0.91 1.37 0.14 0.18 0.35 0.41 0.59 0.89 500 367 368 369 368 450 5.8 8.0 12.0 16.0 24.0 32.0 5 6 9 12 18 26 39 78 220 390 880 1,560 128.2 78.3 42.9 32.8 22.1 18.5 93.2 58.3 33.0 25.6 17.5 14.8 3.2 4.0 6.3 8.0 11.5 15.2 4.0 5.0 7.8 10.0 14.5 19.0 0.6 0.7 0.9 1.1 1.4 1.8 0.6 0.7 0.8 0.9 1.1 1.4 641 462 368 369 368 450 5.8 8.0 12.0 16.0 24.0 32.0 5 6 9 12 18 26 Note: Coil resistance not directly measurable. Coil current should be within limits shown when tested at nominal voltage at 25°C for 5 seconds max. Ordering Instructions Catalog-selected Relays: The catalog number is derived by choosing the proper CODE for each of the relay characteristics in the order in which the codes are listed. Specifying a Part Number Example: Type Terminals Diodes Ground Pins Coils Mounting Pads MGA C D G -26 W * The part number example shown on this page is for catalog items. For a list of specific QPL part numbers, please see the index in Section 15. 1-17 Catalog 5-1773450-5 Revised 3-13 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 800 522 6752 Asia Pacific: +86 0 400 820 6015 UK: +44 800 267 666 For additional support numbers please visit www.te.com