1-1624231-7

Spindle Operated Potentiometers (9mm) Type PC610 Series Type PC610 Series Characteristics Electrical Tyco specification in polymer technology gives this small single turn Resistance Range: Resistance Values: Resistance Laws available: Resistance Tolerance: End Resistance: Slider Current: Power Rating, Watts: Maximum Working Voltage: Insulation Resistance: Rotational Noise (CRV): Temperature Coefficient: 500 Ohms to 500K Ohms 1,2 and 5 in each decade Linear and Non Linear ± 20% 2% Nominal 50mA 0.05W 20Vdc or ac RMS, Max. 100 M Ohms Min at 250 Vdc 20 Ohms or 3% whichever is greater 5% potentiometer stability, reliability and long life. For use in industrial and consumer applications, this component offers durability and quality performance and is available with top or side mounting versions with alternative shafts. The PC610 is an ideal component in toys, games, computer brightness and contrast and most suited to similar large volume applications where the completely automated manufacture allows attractive prices to be achieved. The PC610 is often used without a control knob with the splined tip protruding from the facia. The PC610 is available with or without centre detent. Key Features ■ Stable High Resolution Element ■ Space Saving Size (Only 9.5mm Wide) ■ Offered in Linear and Non-Linear Laws ■ Vertical or Horizontal Mounting ■ Choice of Shaft Style ■ PCB Standoffs ■ Simple One Piece Style Characteristics Mechanical End Stop: Rotational Torque: Mechanical Adjustment: Soldering: Weight: 20mNm 1 - 15mNm 1 Turn - 280° ±10° 300°C (maximum 3 seconds) 3 grams approximate. Characteristics Environmental Temperature Range: Temperature Storage: Bump Severity: Vibration Severity: Rotational Life: Load Life at 50°C: -20°C to 70°C 1000 Hrs at 70°C 4000 Bumps; 20G 10 - 500Hz; 10G 5,000 Operations minimum ∆R < +10% -15% after 500 hours Dimensions PC610H PC610V 3.2 How to Order PC610 H 104 B M 20 Common Part Orientation Resistance Value Resistance Law Shaft Style Shaft Length PC611 - With Detent H - 10mm Mounting Height Shaft parallel to PCB PC612 - Special Mounting Height (6.5mm) HA - 12.5mm Mounting Height Shaft parallel to PCB The first two digits are significant figures of resistance value and the third denotes the number of zeros following. PC610 - No Detent V - Shaft at 90° to PCB Literature No. 1773262 Issued: 10-06 Dimensions are shown for reference purposes only. e.g. 1K: 102 5K: 502 100K: 104 Dimensions are in millimetres unless otherwise specified. F - Flatted (S)20 - 20mm Serrated K - Knurled (S)30 - 30mm Serrated M - Pointer (S)35 - 35mm Serrated N - Plain (F)15 - 15mm Flatted A - Linear B - Log C - Inverse Log Specifications subject to change. P - Phillips Slot (P)15 - 15mm Slotted S - Serrated (K)30 - 30mm Knurled www.tycoelectronics.com passives.tycoelectronics.com