1-1670782-1

8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 2006 7 RELEASED FOR PUBLICATION Tyco Electronics AMP GmbH 6 4 5 1 2 3 2006 PROJECT NO EGATN06466 ALL RIGHTS RESERVED. 6 3.5 AI - P F F1 G H 2:1 DESCRIPTION DATE DWN APVD LOCKING LOWER PART MODIFY 14MAR2012 RM PNI 2.LOCK INFO CORRECTED 06NOV2012 RM PNI SOCKET HOUSING MODIFY 15MAY2013 RM PNI FASE ON 2,8 CAVITYS ADDED 13APR2015 RM PNI CODINGS Kodierungen 2:1 2. LOCK, MUST SEPARATELY BE ORDERED, PN 0-1670789-1 2. Kontaktsicherung muss separat bestellt werden, PN 0-1670789-1 D LTR Einbaustellung nach der Bestueckung von den Kontakten und der 2. Kontatksicherung 2:1 6x3.5(= 21) REVISIONS DIST INSTALLATION POSITION ACCORDING INSERTION OF THE CONTACTS AND THE 2.LOCK DELIVERY CONDITION Anlieferungszustand 37 LOC D LEVER IN PRE LOCKED POSITION PLUG IN DIRECTION FOR CONTACT MOUNTING Einschubrichtung fuer Kontaktbestueckung Hebel in Vorraststellung 6.3 5.5 Z 2. LOCK ASEMBLED PLUG IN DIRECTION FOR 2. LOCK 2.Kontaktsicherung assembiliert Einschubrichtung fuer 2. Kontaktsicherung LEVER IN END LOCKED POSITION Hebel in Endraststellung 4 B C C 3 A B-B C A-A 1 3 4 B 5.1 0.3 25.9+0.4 -0.5 5 B B 2 A B A C-C 60.3 NOTES: Bemerkungen: 6 1 2 3 PACKAGING: LOOSE PIECE INTO CARTON Verpackung: Schuettgut in Karton SUITABLE FOR 1670889 Passend zu 1670889 Z - - CAVITY 1; 9; 10 AND 18 SUITABLE FOR CONTACT: 2.8mm SENSOR FLAT CONTACT 0967543 (STRIP) OR 0967717 (LOOSE PIECE) >1.0mm² TO 2.5mm² AND 0828905 (SINGLE WIRE SEAL) INSULATION DIA.2.2mm TO 3.0mm Kammer 1; 9; 10 und 18 passend fuer Kontakt: 2.8mm Sensor Flachkontakt 0967543 (Band) oder 0967717 (vereinzelt) >1.0mm² bis 2.5mm² und 0828905 (Einzeldichtung) Isolationsdurchmesser 2.2mm bis 3.0mm 24 4 CAVITY 2 TO 8 AND 11 TO 17 SUITABLE FOR CONTACT: MCON-1.2 CLEAN BODY 1534594 (STRIP) OR 1534595 (LOOSE PIECE) 0.35mm² INSULATION DIA. 1.1mm TO 1.75mm 1394897 (STRIP) OR 1534063 (LOOSE PIECE) 0.5mm² TO 0.75mm² INSULATION DIA. 1.4mm TO 1.9mm C - - Kammer 2 bis 8 und 11 bis 17 passend fuer Kontakt: MCON-1.2 CLEAN BODY 1534594 ( Band) und 1534595 (vereinzelt) 0.35mm² Isolationsdurchmesser 1.1mm TO 1.75mm 1394897 ( Band) und 1534063 (vereinzelt) 0.5mm² TO 0.75mm² Isolationsdurchmesser 1.4mm TO 1.9mm 5 6 A Kontaktoberflaeche entsprechend dem Gegenstecker INTERFACE DRAWING NO 114-18801 Schnittstellenzeichnung Nr. 114-18801 1:1 H A 1-1670782-1 COD. (22) 1- -1 - ORDER OF ASSEMBLY: 1.) CONTACT MOUNTING 2.) 2. LOCK MOUNTING 3.) LEVER IN PRE LOCKED POSITION Reihenfolge der Bestueckung: 1.) Kontaktbestueckung 2.) 2. Kontaktsicherung assemblieren 3.) Hebel in Vorraststellung 7 - B CONTACT SUFACE ACCORDING TO MATING CONNECTOR AS SHOWN (DELIVERY CONDITION) ------------------------------------WIE GEZEICHNET TE PART NO. H REV. 1 LEVER PBT-GF20 BLACK 6 1 RADIAL SEAL ELASTOSIL NATURE 5 1 FAMILY SEAL, MCON-1.2 CB ELASTOSIL NATURE 4 1 COVER FAMILY SEAL, MCON-1.2 CB PBT-GF20 BLACK 3 1 18POS. MIXED REC HSG, LOWER PART PBT-GF30 WATER BLUE 2 1 18POS. MIXED REC HSG, UPPER PART PBT-GF20 BLACK 1 1 LEVER PBT-GF20 BLACK 6 1 RADIAL SEAL ELASTOSIL NATURE 5 1 FAMILY SEAL, MCON-1.2 CB ELASTOSIL NATURE 4 1 COVER FAMILY SEAL, MCON-1.2 CB PBT-GF20 BLACK 3 1 18POS. MIXED REC HSG, LOWER PART PBT-GF30 BLUE 2 1 18POS. MIXED REC HSG, UPPER PART PBT-GF20 BLACK 1 1 LEVER PBT-GF20 BLACK 6 1 RADIAL SEAL ELASTOSIL NATURE 5 1 FAMILY SEAL, MCON-1.2 CB ELASTOSIL NATURE 4 1 COVER FAMILY SEAL, MCON-1.2 CB PBT-GF20 BLACK 3 1 18POS. MIXED REC HSG, LOWER PART PBT-GF30 NATURE 2 1 18POS. MIXED REC HSG, UPPER PART PBT-GF20 BLACK 1 1 LEVER PBT-GF20 BLACK 6 1 RADIAL SEAL ELASTOSIL NATURE 5 1 FAMILY SEAL, MCON-1.2 CB ELASTOSIL NATURE 4 1 COVER FAMILY SEAL, MCON-1.2 CB PBT-GF20 BLACK 3 1 18POS. MIXED REC HSG, LOWER PART PBT-GF30 BLACK 2 1 18POS. MIXED REC HSG, UPPER PART PBT-GF20 BLACK 1 MATERIAL COLOUR QTY DESCRIPTION THIS DRAWING IS A CONTROLLED DOCUMENT. DIMENSIONS: (Anlieferungszustand) mm MATERIAL - TOLERANCES UNLESS OTHERWISE SPECIFIED: ALLGEMEINTOLERANZEN DIN/ISO 16901-140 CENTRE/mittig 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - - 19DEC2006 P. Nickelfeld CHK 05JAN2007 J. Ryll DWN APVD - PRODUCT SPEC 108-94094 APPLICATION SPEC 1 $ 114-18853 WEIGHT CUSTOMER DRAWING 4806 (3/11) ITEM NO TE Connectivity - NAME 18POS. MIXED REC HSG, ASSY 18polig Buchsengehaeuse Assy - SIZE A0 CAGE CODE 00779 DRAWING NO 1670782 SCALE 5:1 SHEET RESTRICTED TO - 1 OF 1 REV H A