1-2154857-2

4 RELEASED FOR PUBLICATION THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 BY - 2 3 1 20 LOC REVISIONS DIST - ALL RIGHTS RESERVED. - P LTR DESCRIPTION A A1 A2 A3 14.6 D 3.1 DATE DWN APVD REVISED PER ECR-15-007373 31JUL2015 RS DD REVISED PER ECR-18-010414 11JUL2018 SR DD REVISED PER ECR-18-012133 01AUG2018 SR DD REVISED PER ECR-19-000093 08JAN2019 SR DD D 3.3 4.1 NOTES: 1 MATERIALS AND FINISH: -HOUSING: PBT-GF, COLOR: NATURAL -CONTACTS: COPPER ALLOY FINISH: SEE TABLE -THERMAL SPRING: STAINLESS STEEL 5.0 16.6 2. MUST COMPLY WITH DIRECTIVE 2002/95/EC (ROHS) C 3 5.00 REFER TO LED MANUFACTURER'S DATASHEET FOR LED DIMENSIONS DIM "B" REF 4. REFER TO LED DATASHEET FOR RECOMMENDED THERMAL INTERFACE MATERIALS 5. RECOMMENDED SCREW SIZE: M3 OR #4. TORQUE SCREWS TO 2.5 in-lbf TO 4.0 in-lbf DIM "A" REF 7 B 8 9 10 A 3.7 2.0 8.00 6. WIRE TYPES AND SIZES ACCEPTED 18, 20 AND 22 AWG SOLID WIRE 18 AND 20 AWG PREBOND STRANDED WIRE 18 AWG STRANDED WIRE (16 STRAND COUNT) MAX INSULATION OD: 2.10 MM STRIP LENGTH: 7.5±1.0 2.65 7 IN APPLICATIONS WHERE THE LED SUBSTRATE IS LESS THAN 1.50MM THICK A THERMAL SPRING IS REQUIRED. AS NOTED IN THE TABLE THE THERMAL SPRINGS WILL BE INSTALLED PRIOR TO SHIPMENT FROM THE TE FACTORY. B REQUIRES THE USE OF LED WITH GOLD PLATED PADS RECOMMENDED PCB PAD AND HEAT SINK LAYOUT FOR LED PANEL APPLICATIONS. THE RECOMMENDED LED HOLDER FOR THESE APPLICATIONS IS PART NUMBER 1-2154857-3. IN APPLICATIONS WHERE THE LED PANEL IS LESS THAN 1.5MM THICK USE 3-2154857-3 WITH THERMAL SPRINGS IF THERMAL PRESSURE FROM THE HOLDER IS REQUIRED. IN APPLICATIONS WHERE THE LED SUBSTRATE IS LESS THAN 1.50MM THICK AND A THERMAL SPRING IS NOT USED IT IS THE RESPONSIBILITY OF THE END USER TO ENSURE THAT ADEQUATE SYSTEM THERMAL PERFORMANCE IS ACHIEVED. THE LED HOLDER ALONE WILL NOT PROVIDE ENOUGH FORCE BY ITSELF TO GENERATE A RELIABLE AND STABLE THERMAL SOLUTION FOR THE LED. 11. FOR COB-TO-HOLDER CROSS REFERENCE, REFER TO APPLICATION SPECIFICATION 114-32208. 3.0 YES 3.75 2.95 TIN OVER NICKEL 3-2154857-3 YES 3.75 2.95 GOLD OVER NICKEL 2-2154857-3 YES 2.25 2.00 GOLD OVER NICKEL 2-2154857-2 YES 1.85 1.55 GOLD OVER NICKEL 2-2154857-1 NO 3.75 2.95 TIN OVER NICKEL 1-2154857-3 NO 3.75 2.95 GOLD OVER NICKEL 2154857-3 DIM "B" DIM "A" CONTACT PLATING PART NUMBER NO 7 2.25 THERMAL SPRING 10 THIS DRAWING IS A CONTROLLED DOCUMENT. TOLERANCES UNLESS OTHERWISE SPECIFIED: DIMENSIONS: mm 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES MATERIAL FINISH 1471-9 (3/11) C 8.00 0.2 0.13 0.001 0.0001 2.00 16MAR2012 M. MOSTOLLER CHK 16MAR2012 M. MOSTOLLER APVD 16MAR2012 - TIN OVER NICKEL DWN TE Connectivity NAME PRODUCT SPEC 108-133005 APPLICATION SPEC 2 1-2154857-2 114-32043 WEIGHT SIZE - - Customer Drawing A TWO PIECE ASSEMBLY LUMAWISE LED HOLDER, SCALABLE CAGE CODE A2 00779 RESTRICTED TO DRAWING NO 2154857 SCALE 6:1 SHEET 1 OF - 3 REV A3 4 RELEASED FOR PUBLICATION THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 3 D C B 20 2 3 1 20 LOC - ALL RIGHTS RESERVED. BY - RECOMMENED SOCKET PART NUMBER LED DIMENSION DIM "C" DIM "D" DIM "E" DIM "F" 25.5 X 22.3 9.70 16.30 6.30 15.80 17.5 X 13.3 5.83 11.83 1.83 11.93 1-2154857-3 15.8 X 15.80 4.95 13.05 3.05 11.05 2-2154857-1 21.0 X 21.0 7.55 15.65 5.65 13.65 2-2154857-1 13.5 X 13.5 3.80 11.90 1.90 9.90 2-2154857-1 19.0 X 19.0 6.55 14.65 4.65 12.65 2-2154857-1 28.0 X 28.0 11.05 19.15 9.15 17.15 2-2154857-2 38.0 X 38.0 16.05 24.15 14.15 22.15 2-2154857-2 28.0 X 19.0 11.05 14.65 4.65 17.15 2-2154857-3 28.5 X 28.5 11.30 19.40 9.40 17.40 2-2154857-3 22.0 X 22.0 8.05 16.15 6.15 14.15 1-2154857-3 13.35 X 13.35 3.73 11.83 1.83 9.83 2-2154857-2 15.85 X 15.85 4.98 13.08 3.08 11.08 2-2154857-2 17.85 X 17.85 5.98 14.08 4.08 12.08 2-2154857-2 17.85 X 17.85 5.98 14.08 4.08 12.08 2-2154857-2 17.85 X 17.85 5.98 14.08 4.08 12.08 2-2154857-1 23.85 X 23.85 8.98 17.08 7.08 15.08 2-2154857-2 27.35 X 27.35 10.73 18.83 8.83 16.83 2-2154857-2 34.85 x 34.85 14.48 22.58 12.58 20.58 2154857-3 13.5 X 13.5 3.80 11.90 1.90 9.90 2-2154857-1 19.0 X 19.0 6.55 14.65 4.65 12.65 2-2154857-1 DIM "E" # 0.05 24.4 X 18.0 9.25 14.15 4.15 15.35 2-2154857-2 19.0 X 16.0 6.55 13.15 3.15 12.65 2-2154857-1 DIM "F" # 0.05 24.0 X 19.0 9.05 14.65 4.65 15.15 2-2154857-1 30.0 X 30.0 12.05 20.15 10.15 18.15 3-2154857-3 19.0 X 16.0 6.55 13.15 3.15 12.65 2-2154857-2 24.0 X 20.0 9.05 15.15 5.15 15.15 2-2154857-3 17.0 X 17.0 5.55 13.65 3.65 11.65 2-2154857-3 21.5 X 21.5 7.80 15.90 5.90 13.90 2-2154857-3 28 X 28 11.05 19.15 9.15 15.0 X 12.0 4.55 11.15 1.15 24.0 X 20.0 9.05 15.15 13.25 X 13.25 3.68 17.75 X 17.75 5.93 17.15 - P LTR - DESCRIPTION DATE SEE SHEET 1 DWN APVD - - - 1-2154857-2 D DIM "C" # 0.05 DIM "D" # 0.05 DRILL AND TAP FOR M3 OR #4 MOUNTING HARDWARE 2 PLACES DRILL 2.75 0.05 FOR ALIGNMENT POST 2 PLACES C B CENTER OF LED PACKAGE DIM "C" # 0.05 DIM "F" # 0.05 2-2154857-2 DIM "E" # 0.05 10.65 2-2154857-1 5.15 15.15 2-2154857-3 DIM "D" # 0.05 11.78 1.78 9.78 2-2154857-1 14.03 4.03 12.03 2-2154857-2 RECOMMENDED MOUNTING HOLE PATTERN THIS DRAWING IS A CONTROLLED DOCUMENT. A TOLERANCES UNLESS OTHERWISE SPECIFIED: DIMENSIONS: mm 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES MATERIAL FINISH 1471-9 (3/11) REVISIONS DIST 0.2 0.13 0.001 0.0001 16MAR2012 M. MOSTOLLER CHK 16MAR2012 M. MOSTOLLER APVD 16MAR2012 DWN TE Connectivity NAME PRODUCT SPEC 108-133005 APPLICATION SPEC 2 114-32043 WEIGHT SIZE - - Customer Drawing A TWO PIECE ASSEMBLY LUMAWISE LED HOLDER, SCALABLE CAGE CODE A2 00779 RESTRICTED TO DRAWING NO 2154857 SCALE 6:1 SHEET 2 OF - 3 REV A3 4 RELEASED FOR PUBLICATION THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 LOC SEE DETAIL - P LTR - DESCRIPTION DATE SEE SHEET 1 DWN APVD - - - A D EDGE OF LED PANEL PCB 2.95 5.15 REVISIONS DIST - DRILL AND TAP FOR M3 OR #4 MOUNTING HARDWARE D 1 ALL RIGHTS RESERVED. BY - 20 2 3 EDGE OF LED PANEL PCB ELECTRICAL CONTACT PAD 3.20 2.00 3.15 2.00 3.15 4.85 2.00 C 4.85 C 3.20 DRILL n 2.75 # 0.05 FOR HOLDER ALIGNMENT POST 3.20 EDGE OF LED PANEL PCB 2.00 EDGE OF LED PANEL PCB 5.15 2.95 RECOMMENDED ELECTRICAL CONTACT PAD TIN PLATED, 2.5MICRONS MIN 2 PLACES 3.20 9 B 9 DETAIL A SCALE 4:1 B SEE DETAIL DRILL n 2.75 # 0.05 FOR HOLDER ALIGNMENT POST B DETAIL SCALE 4:1 DRILL AND TAP FOR M3 OR #4 MOUNTING HARDWARE B 9 1.60 REF RECOMMENDED PCB THICKNESS CUSTOMER SUPPLIED LED PANEL PCB ASSEMBLY CUSTOMER SUPPLIED HEAT SINK ASSEMBLY 9 APPLICATION NOTE: IN ADDITION TO USE WITH COB LEDS THE SCALABLE LED HOLDER CAN BE UTILIZED TO MAKE AN ELECTRICAL CONNECTION TO FR4 OR PCB ASSEMBLIES. RECOMMENDED DIMENSIONAL INFORMATION FOR OF APPLICATION IS SHOWN IN THE DRAWING VIEWS ABOVE. IMS THIS TYPE THIS DRAWING IS A CONTROLLED DOCUMENT. A TOLERANCES UNLESS OTHERWISE SPECIFIED: DIMENSIONS: mm 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES MATERIAL FINISH 1471-9 (3/11) 0.2 0.13 0.001 0.0001 16MAR2012 M. MOSTOLLER CHK 16MAR2012 M. MOSTOLLER APVD 16MAR2012 DWN TE Connectivity NAME PRODUCT SPEC 108-133005 APPLICATION SPEC 2 114-32043 WEIGHT SIZE - - Customer Drawing A TWO PIECE ASSEMBLY LUMAWISE LED HOLDER, SCALABLE CAGE CODE A2 00779 RESTRICTED TO DRAWING NO 2154857 SCALE 6:1 SHEET 3 OF - 3 REV A3