1-2208720-1

7 8 THIS DRAWING IS UNPUBLISHED. VERTRAULICHE UNVEROEFFENTLICHTE ZEICHNUNG C COPYRIGHT2013 2013 RELEASED FOR PUBLICATION FREI FUER VEROEFFENTLICHUNG ALL RIGHTS RESERVED. ALLE RECHTE VORBEHALTEN. Tyco Electronics Corporation 6 MATED WITH: PASSEND ZU: 5 4 3 2 1 PROJEKT NR.: 6 PRJ-11-00003789 - REVISIONS P 2.5 x 16 = 40 26.8 3.4 x 4 = 13.6 3.25 8.45 0.15 0.55 0.15 1:1 0.15 3.15 0.15 5.95 6 (30.8) 0.1 8.75 8.8 3.25 8.45 5 2 1 A 0.4 2 2 WIRE RANGE 0.35mm TO 0.75mm 4 14.15 (END LOCK) MCON 1.2 CB 2 2 WIRE RANGE 0.75mm TO 1.5mm 1-2208720-1 1 1 1 1 1 1 1 1 B 1 1 1 1 1 1 1 1 B 1 1 1 1 1 1 1 1 B (48.3) 1 1 1 1 1 1 1 1 A 1 1 1 1 1 1 1 1 A C1 A 25 26 27 ....... 41 42 43 44 45 46 47 48 ....... 62 63 64 65 66 67 68 69 ....... 83 84 85 86 87 88 89 90 .......104 105 USED WITH: SEALING PLATE:- X-2208738-X RETAINER:- 2208714-1 COVER ASSY:- 2208728-1/2208729-1/2208730-1/ 2208731-1/2208732-1 PARTS HAVE TO BE ORDERED SEPARATELY 2 Kammer fuer Flachkontakt 1.2, 0.75 - 1.5mm Leitung 2 Cavity for flat Contact 1.2, 0.75 - 1.5mm cable Zu verwendende Blindkontakte VW PN 4H0 971 904 A / RB PN 1 928 C04 526 -01 Blind contacts to be used VW PN 4H0 971 904 A / RB PN 1 928 C04 526 -01 2 Kammer fuer Flachkontakt 1.2, 0.35 - 0.75mm Leitung 2 Cavity for Flat Contact 1.2, 0.35 - 0.75mm cable Zu verwendende Blindkontakte TE PN 2286476-1 Blind contacts to be used TE PN 2286476-1 1 A TE-ASSY NO. (SEE TABLE), TE-ASSY REVISION, TE-ASSY PRODUCTION DATE SUITABLE TE HEADER - 2005513 SUITABLE TE INTERFACE - 114-61042 Lagenverpackung 3 Passende MCON 1.2 MCON 1.2 MCON 1.2 4 Laserbeschriftung, Beschriftung nach Zusammenbau, Schrift nach DIN 1451-H2 5 TE- Assy Nr. (siehe Tabelle), TE-Assy Rev. , TE-Assy Herstellungsdatum 6 Passend TE HEADER - 2005513 Passend TE Schnittstelle - 114-61042 SLIDE RIGHT 6 DARK BLUE SILICONE 105 WAY, FAMILY SEAL 4 PA66-GF30 QTY. QTY. QTY. QTY. REV 65 65 65 65 65 65 65 65 WEIGHT (g) 8 7 6 5 4 3 2 1 CODING B B B B B B B C SLIDE LEFT PA66-GF30 5 PERIPHERAL SEAL PA66-GF30 2 105 WAY, CONTACT HSG. LOWER PART 1 PA66-GF30 105 WAY, CONTACT HSG. LOWER PART 1 PA66-GF30 105 WAY, CONTACT HSG. LOWER PART 1 PA66-GF30 105 WAY, CONTACT HSG. LOWER PART 1 PA66-GF30 105 WAY, CONTACT HSG. LOWER PART 1 PA66-GF30 105 WAY, CONTACT HSG. LOWER PART 1 PA66-GF30 105 WAY, CONTACT HSG. LOWER PART 1 PA66-GF30 COLOUR B 105 WAY, CONTACT HSG. UPPER PART 3 SILICONE BLACK QTY. C1 PA66-GF30 BLACK QTY. Kontakte: CB 1534594-1/-2/-3 fuer 0.35mm² CB 1670144-1/-2/-3 fuer 0.5-0.75mm² CB 1452503-1/-2/-3 fuer 1.0-1.5mm² BLACK BLACK QTY. C 2 BLACK QTY. 1 D CONTACTS E.G.: CB 1534594-1/-2/-3 FOR 0.35mm² CB 1670144-1/-2/-3 FOR 0.5-0.75mm² CB 1452503-1/-2/-3 FOR 1.0-1.5mm² Benutzt mit : Dichtungshalter:- X-2208738-X Retainer:- 2208714-1 Kappe Assy:- 2208728-1/2208729-1/2208730-1/ 2208731-1/2208732-1 Teile muessen separat bestellt werden BLACK A 105 WAY, CONTACT HSG. LOWER PART 1 MATERIAL ITEM NO DESCRIPTION REV 0 1-2208720-8 1-2208720-7 1-2208720-6 1-2208720-5 1-2208720-4 1-2208720-3 1-2208720-2 1-2208720-1 TE ASSY NO5 PRODUCT CHARACTERISTICS ACC. QMP EMEA_12 BESONDERE MERKMALE NACH QMP EMEA_12 A TOLERANCES UNLESS OTHERWISE SPECIFIED ACC. TO DIN 16901-140AD CENTRIC TO NOMINAL DIMENSION. EDITION 1982-11 SHALL APPLY. AD Freimasstoleranzen nach DIN 16901-140 . Es gilt die Ausgabe 1982-11. DWN 16SEP2013 DIMENSIONING AND TOLERANCING PER GPS (ISO STANDARDS).CHK 18SEP2013 THIS DRAWING IS A CONTROLLED DOCUMENT. DIMENSIONS: MASSEINHEITEN: mm MATERIAL SEE TABLE - 4805 (3/13) MDG LASER MARKING, PRINT AFTER ASSEMBLY, CHARACTERS ACC. TO DIN 1451-H2 BLACK A 1 24 KC 23NOV2022 4 BLACK A 1 23 MATERIAL CHANGE FOR FAMILY SEAL SUITABLE MCON 1.2 MCON 1.2 MCON 1.2 BLACK A 1 22 C1 3 ORANGE A 1 21 GKT PACKAGING: LAYERS IN BOX BLACK 0 A 1 ....... 20 RS 2 BLACK A 1 6 INTERFACE AND APPLICATION SPEC. NO's ADDED 27SEP2016 AS SHOWN wie gezeichnet 1 5 B3 1 37.7 1.5 (PRE LOCK) 1 4 GKT 1.5 B 3 SS Bemerkungen (36.5) 5 2 14JUL2016 C C 1 CONTACT- WIRE ASSIGNMENT ADDED 6 SLIDE IN END POSITION Schieben in Endraststellung Kontakt-/ Leitungsbestueckung Contact-/ Wire assignment B2 5 DELIVERY CONDITION; Anlieferungszustand; MCON 1.2 CB GKT 6 0.15 (62.3) 68.8 APVD ASSY REV. AND ITEM NO 5 AND 6 REV CHANGED 11FEB2015 MR 3.15 0.15 0.15 DWN B1 1 B 0.15 DATE NOTES 3 0.55 DESCRIPTION BESCHREIBUNG 4 0.2 A B C D AENDERUNGEN LTR TOLERANCES UNLESS OTHERWISE SPECIFIED: ALLGEMEINTOLERANZEN 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES/WINKEL GOPI KT 20SEP2013 APVD M ZAYC TE Connectivity NAME 105 WAY CONNECTOR ASSY MCON 1.2 CB - PRODUCT SPEC PRODUKTSPEZ. - 1 $ FINISH /OBERFLAECHE/FARBE - RAMESH S APPLICATION SPEC VERARBEITUNGSSPEZ. 114-94365-02 WEIGHT GEWICHT - Customer Drawing SIZE A1 CAGE CODE DRAWING NO ZEICHNUNGS-NR. - 2208720 /KUNDENZEICHNUNG SCALE MASSSTAB 2:1 SHEET BLATT RESTRICTED TO NUR FUER 1 OF VON - 2 C1 REV 7 8 THIS DRAWING IS UNPUBLISHED. VERTRAULICHE UNVEROEFFENTLICHTE ZEICHNUNG C COPYRIGHT2013 Tyco Electronics Corporation 6 2013 RELEASED FOR PUBLICATION FREI FUER VEROEFFENTLICHUNG ALL RIGHTS RESERVED. ALLE RECHTE VORBEHALTEN. 5 4 3 2 PROJEKT NR.: MATED WITH: PASSEND ZU: - (8.45) (5.85) (3.15) 1 CODINGS Kodierungen (3.15) REVISIONS - P DESCRIPTION BESCHREIBUNG SEE SHEET 1 - (8.45) AENDERUNGEN LTR DATE DWN APVD - - - (8.45) (3.15) (5.75) D D (3.15) CODING 2 1-2208720-2 (8.45) (8.45) C B (5.85) (3.15) CODING 3 1-2208720-3 (3.25) (5.75) CODING 4 1-2208720-4 (3.15) (8.45) (8.45) (8.45) (8.45) (0.55) (5.85) (5.75) (5.75) (5.75) (3.25) (0.55) (0.55) (0.55) (0.55) (0.55) CODING 5 1-2208720-5 (0.55) (3.25) (5.75) (8.45) CODING 6 1-2208720-6 C (3.25) (5.75) (5.75) (8.45) B (8.45) (8.45) (5.75) (5.85) (3.15) (5.85) (8.45) (5.75) (3.15) (8.45) (3.25) (3.25) (8.45) (8.45) (3.25) (3.25) (5.75) (5.75) (5.75) (3.25) (0.55) (0.55) PRODUCT CHARACTERISTICS ACC. QMP EMEA_12 BESONDERE MERKMALE NACH QMP EMEA_12 A A TOLERANCES UNLESS OTHERWISE SPECIFIED ACC. TO DIN 16901-140AD CENTRIC TO NOMINAL DIMENSION. EDITION 1982-11 SHALL APPLY. AD Freimasstoleranzen nach DIN 16901-140 . Es gilt die Ausgabe 1982-11. DWN 16SEP2013 DIMENSIONING AND TOLERANCING PER GPS (ISO STANDARDS).CHK 18SEP2013 THIS DRAWING IS A CONTROLLED DOCUMENT. CODING 7 1-2208720-7 4805 (3/13) (5.75) (8.45) (0.55) (5.85) CODING 8 1-2208720-8 DIMENSIONS: MASSEINHEITEN: (0.55) mm (3.25) (5.75) (8.45) (5.75) (8.45) MATERIAL SEE TABLE - TOLERANCES UNLESS OTHERWISE SPECIFIED: ALLGEMEINTOLERANZEN 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES/WINKEL GOPI KT 20SEP2013 APVD M ZAYC TE Connectivity NAME 105 WAY CONNECTOR ASSY MCON 1.2 CB - PRODUCT SPEC PRODUKTSPEZ. - 1 $ FINISH /OBERFLAECHE/FARBE - RAMESH S APPLICATION SPEC VERARBEITUNGSSPEZ. - WEIGHT GEWICHT - Customer Drawing SIZE A1 CAGE CODE DRAWING NO ZEICHNUNGS-NR. - 2208720 /KUNDENZEICHNUNG SCALE MASSSTAB 2:1 SHEET BLATT RESTRICTED TO NUR FUER 2 OF VON - 2 C1 REV