1-2286946-5

7 2022 TE Connectivity. All Rights Reserved. 5 CODINGS SHOWN WITHOUT LEVER - 1:1 3 2 1 REVISIONS THE DRAWING SHOWS THE 2-DIMENSIONAL REFERENCE COMPONENT CONDITION OF THE ASSEMBLY TO IDENTIFY AND SPECIFY THE NECESSARY DIMENSIONS ONLY. THE DELIVERED PARTS MAY DEVIATE FROM THE DRAWING REGARDING THE ORIENTATION AND POSITION OF EACH COMPONENT (e.g. SLACK CABLE), SO FAR THE FUNCTIONALITY IS NOT CONCERNED. (8.5) P (13) (24.1) (8.5) (24.1) (13) 4 (24.1) C 6 LTR DESCRIPTION DATE DWN B4 VARIANTS ADDED, NOTES AND LABEL UPDATED 11OCT2018 JM JJ B5 NEW VARIANTS ADDED 08NOV2018 JM JJ B6 OBSOLETE PNs 18OCT2022 OS JK B7 SUPERSEEDED PNs 04JUL2023 OS JK APVD (24.1) 8 NOTES D B A 1 2 D C 3 4 5 6 7 8 10 9 4 1 PACKAGING: EACH HOUSING OF THE CABLE ASSEMBLY TO BE INDIVIDUALLY WRAPPED IN FOAM (PN 741639-2) AND FIXED WITH RUBBER BAND (PN 1-2000064-0). PACKED IN STANDARD SHIPPING BOX VERTICAL SIDES OVERLAID WITH PAPER CUSHIONS (PN 740045-2) ACCORDING TE SPEC. 107-18087, 107-18064. DAMAGED TO BE AVOIDED. 2 ELECTRICAL TEST ACCORDING TE SPECIFICATION 108-18857. USE CURRENT REVISION ALWAYS. MIN. 10 mm STRIPPING OF OUTER JACKET AND BRAID FOR ELECTRICAL TEST PURPOSE. 3 PRODUCT SPECIFICATION: 108-94268, 108-94256 APPLICATION SPECIFICATION: 114-94052, 114-94083 4 MANUFACTURING CODE: TE PART NO., CURRENT REV. LEVEL AND DATE CODE (DD.MM.YY), TO BE PRINTED ON LABEL (ITEM 10). LABEL TO BE APPLIED TO THE CABLE AFTER SUCCESSFUL ELECTRICAL TEST. 5 LEVER POSITION: CLOSED ON DELIVERY. D 1 2 C C 2 SUPERSEEDED BY 100 # 15 OBSOLETE L - OBSOLETE - OBSOLETE - OBSOLETE CURRENT REV. - TE PN: X-2286946-YRev. __ DD/MM/YY B 2.7 kV DC TEST PASSED - DATE CODE B7 B7 B7 B7 1 1 1 1 LABEL, HELL, TYP 323, 25.4 x 95.25 see see see see table table table table 1 POS, POWER CABLE, 35 SQMM 2 2 2 2 PROTEC. COVER 8 MM HV, 90 DEG, 35 SQMM A 2 2 2 2 SINGLE WIRE SEAL, 8 MM HV, 90 DEG, 35 SQMM 2 2 2 2 SHIELDING SLEEVE, 90 DEG 2 2 2 2 1 - 2 2 2 2 1 - 2 2 2 2 - 1 2 2 2 2 - SHIELD CRIMP FERRULE, 90 DEG FINGER PROTECTION CAP 8 MM HV, 90 DEG HV 8 MM, DEEP DRAWN SOCKET PIN, 90 DEG., ASSEMBLY HV 8 MM, DEEP DRAWN SOCKET PIN, 90 DEG., ASSEMBLY 2 POS, 8 MM HV, REC HSG, 90 DEG, ASSY, SEALED, COD D 2 POS, 8 MM HV, REC HSG, 90 DEG, ASSY, SEALED, COD C 2 POS, 8 MM HV, REC HSG, 90 DEG, ASSY, SEALED, COD B 1 2 POS, 8 MM HV, REC HSG, 90 DEG, ASSY, SEALED, COD A QTY QTY QTY QTY DESCRIPTION 4- -X 3- -X 2- -X 1- -X 4805 (3/13) B 1-2286946-2 B - 4 1-2286946-0 1-2286946-1 OBSOLETE LABEL LEGEND: REV. - OBSOLETE 5 TE PART NO. 3-2286946-3 +35 B 3000 1-2286946-5 B 2-2286946-0 B B 1-2286946-6 2-2286946-3 B 3000 2-2286946-5 B 2-2286946-4 3-2286946-2 3-2286946-5 A 1000 A 3000 4000 4-2286946-0 A 500 A 4-2286946-3 - 4-2286946-5 1000 A 3000 A 4-2286946-4 +60 +65 A A B +30 +30 +35 C +40 +50 5000 A B +50 2000 A - +40 500 3-2286946-4 4-2286946-2 +35 7000 A 4-2286946-1 +30 5000 A 3-2286946-1 +30 4000 A 3-2286946-0 +65 2000 B 2-2286946-6 +60 500 B A +50 7000 1000 2-2286946-2 +40 5000 B CODING +30 4000 A 2-2286946-1 - 4-2286946-5 2000 1-2286946-3 3-2286946-3 4-2286946-3 +30 1000 1-2286946-4 TOL. [mm] 500 B - 3-2286946-5 LENGTH L [mm] +60 +30 +30 2000 +35 4000 +50 D +40 5000 +60 10 9 8 7 6 5 4 TOLERANCING EN ISO 8015 TOLERIERUNG EN ISO 8015 DIESE ZEICHNUNG IST EIN KONTROLLIERTES DOKUMENT. BEMASSUNGEN UND TOLERANZEN GEMAESS GPS (ISO STANDARDS). DWN 06MAR2015 DIMENSIONING AND TOLERANCING PER GPS (ISO STANDARDS).CHK 06MAR2015 THIS DRAWING IS A CONTROLLED DOCUMENT. DIMENSIONS: 3 mm 2 1 MATERIAL ITEM NO. - TOLERANCES UNLESS OTHERWISE SPECIFIED: - 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - O. Snajder J. Janecka APVD R. Hort 06MAR2015 A TE Connectivity NAME PRODUCT SPEC see note 3 APPLICATION SPEC - see note 3 WEIGHT - CUSTOMER DRAWING SIZE 2 POS. HVP800, 90, 35 SQMM, CABLE ASSY - A1 CAGE CODE - DRAWING NO 2286946 SCALE 1:1 SHEET 1 RESTRICTED TO OF - 1 REV B7