1-2308319-1

RAIL D-SUB BACKSHELLS FOR D-SUBMINIATURE CONNECTORS D-SUB BACK SHELLS /// DATA SHEET D-Sub Backshells For D-Subminiature Connectors RAIL D-SUB BACKSHELLS FOR D-SUBMINIATURE CONNECTORS A comprehensive range of ruggedized metal backshells for D-Subminiature connectors. Fast easy installation and assembly thanks to a practical construction with a minimum number of single parts. TE Connectivity (TE) have many options available including two cable exit variants and a unique retrofitable quick-lock system for easy robust assembly in tight spaces. With a cable exit option of crimp inserts ensuring unparelleled 360o EMI/ EMC Shielding, the crimp insert also protects the conductors against damage druing the crimping process. For quick and easy installation we also have a screw strain relief cable exit option which required no special tooling. Self retaining assembly 2 Strain relief versions: • screws Crimp for high vibration and extreme 225o, 180o and 135o cable environmental exit options conditions, torsion proof, 360o EMI High Quality die cast metal shielding • shell Screw strain relief for Large volume allows for easy cable preperation dense packing. 360o EMI/EMC shielding for Several Turned steel screws useage in EN50155 systems options in M3 and UNC4-40 Full metal parts means fire M3 or UNC4-40 thread and smoke compliant Cable Outlet Size 1 9/15p 180o Cable Outlet 135o Cable Outlet 225o Cable Outlet D-SUB BACKSHELLS /// DATA SHEET Size 2 15/26p Size 3 25/44p Size 4 37/62p Size 5 50/78p D-Sub Backshells For D-Subminiature Connectors Screw Lock Options With multiple screw lock options our D-Sub backshells meet all requirements for D-Subminature connectors. Knurled, 50mm length Allen Key, 24mm Thread M3 or UNC4-40 Knurled, 24mm B A B A C B C + C Ordering Information Screw Length Positions 1 2 3 4 5 Picture Locking screw w/ spring washer Locking Screw short knurled Locking screw Long knurled Locking screw long knurled and locking screw short knurled 20.7mm 24mm 50mm 24/50mm Thread Cable Outlet 180o UNC 4-40 1-2308340-1 1-2308340-3 1-2308340-5 - M3 1-2308340-2 1-2308340-4 1-2308340-6 - UNC-4-40 1-2308340-7 1-2308340-9 - 2-2308340-1 M3 12308340-8 2-230834-0 - 2-2308340-2 UNC 4-40 1-2308341-1 1-2308341-3 1-2308341-5 - M3 1-2308341-2 1-2308341-4 1-2308341-6 - UNC 4-40 1-2308341-7 1-2308341-9 - 2-2308341-1 M3 1-2308341-8 2-2308341-0 - 2-2308341-2 UNC 4-40 1-2308342-1 1-2308342-3 1-2308342-5 1-2308342-7 M3 1-2308342-2 1-2308342-4 1-2308342-6 1-2308342-8 UNC 4-40 1-2308345-1 1-2308345-3 1-2308345-5 1-2308345-7 M3 1-2308345-2 1-2308345-4 1-2308345-6 1-2308345-8 UNC 4-40 1-2308346-1 1-2308346-3 1-2308346-5 1-2308346-7 M3 1-2308346-2 1-2308346-4 1-2308346-6 1-2308346-8 9P/15P 15/26P 25/44P 37/62P 50/78P 135o 225o D-Sub Backshells For D-Subminiature Connectors Quick Lock Hoods Our quick lock versions are an effective, time saving solution, with self retaining assembly screws and with its ‘squeeze to release’ self locking system it also provides three cable exit options in just one single part. Self retaining assembly screws 225o, 180o and 135o cable exit options in one part High Quality full metal Shell 360o EMI.EMC sheilding Large volume allows for dense packing. Squeeze to release, no screw locks needed, self locking during assembly. Easy retrofitting of existing systems with Quick Lock pins. (See Quick Lock pin options) Quick Lock pin options A Fixed female screwlock D-Sub Female connector Quick lock pins mounted in existing M3 or UNC4-40 sockets Panel (front or back mounted) B Threaded insert C Standard mounting hole Length depending on panel thickness Quick lock pins mounted in standard mounting holes using M3 nuts Panel (front mounted) D Bracket mounting (2x Sub-D) 2x D-Sub connector used to connect two cables with eachother Length depending on panel thickness Quick lock pins mounted in threaded sockets on the backside of the connector Panel (front mounted) Quick lock pins mounted in bracket using locking ring Panel D-SUB BACKSHELLS /// DATA SHEET D-Sub Backshells For D-Subminiature Connectors Ordering Information Quick Lock Versions Quick Lock Shells Shell Size Positions 1 9p/15p 1-2308319-1 2 15p/26p 1-2308321-1 3 25p/44p 1-2308327-1 4 37p/62p 1-2308330-1 5 50p/78p 1-2308338-1 Picture Part Number Cable Outlet 225o 180o 135o Quick Lock Pin Options Picture PN Thread Panel Thickness 1-2308273-1 M3 N/A 1-2308273-2 4-40 UNC N/A 1-2308265-1 4-40 UNC N/A 1-2308265-2 4-40 UNC 1.0-1.3 1-2308265-3 4-40 UNC 1.5-1.8 1-2308265-4 4-40 UNC 1.7-2.0 1-2308265-5 4-40 UNC 2.2-2.5 1-2308265-6 M3 N/A 1-2308265-7 M3 1.0-1.3 1-2308265-8 M3 1.5-1.8 1-2308265-9 M3 1.7-2.0 2-2308265-0 M3 2.2-2.5 1-2308290-1 M3 1.7-2.0 A B C D 1-2308298-1 1.25 1-2308298-2 1.5 1-2308298-3 1-2308298-4 N/A 2 2.2 1-2308298-5 2.5 1-2308298-6 3 D-Sub Backshells For D-Subminiature Connectors Cable Exit options Option 1: Crimped Strain relief Cable rotation can lead to breakage of the individual wires in the cable. This can lead to intermittent system errors which are typically very difficult to find. The Solution: Crimping the cable jacket Advantage: A well defined and proven method. The crimp insert protects the conductors against damage during the crimping process. Creating Unparalleled EMI Shielding all around the connector. Crimp Barrel Crimp Flange Jacket Fits both Standard and Quick Lock hoods. Conductors & Foil Cable braid connectors to Crimp insert providing 360o EMI/EMC shielding How to select the correct crimp flange Step Description Example 1 Measure the outside cable diameter (3 times on different places at different angles) OD = 6.5mm 2 Strip the cable and remove the cable braiding 3 Measure the diameter of the inner cable bundle including the foil ID = 4.4mm 4 Select the crimp flange with a hole diameter next up to the cable bundle diameter PN = 2-2308349-1, ID = 4.5mm, OD = 5.5mm 5 Calculate the recommended barrel inner diameter with the following formula: Recommended Inner crimp barrel diameter = OD of crimp flange + 2x(thickness of the cable jacket) + 0.2mm Thickness cable jacket = 6.5 -4.4)/2 = 1.05mm Barrel ID = 5.5mm + 2x 1.05 + 0.2mm = 7.8mm 6 Select the crimp barrel with the next size up PN = 1-2308350-7, ID = 8.0mm, OD = 9.0mm 7 Order the correct crimp tool & crimp insert using the crimp barrel selection matrix PN = 1-2823557-1 & 1-2823558-3 8 Prepare a cable sample and check if the pull out force meets your requirements. Contact TE Connectivity representative in case of any questions. D-SUB BACKSHELLS /// DATA SHEET D-Sub Backshells For D-Subminiature Connectors Ordering Information Crimp Strain relief Recommended Tooling Crimp flanges (Can be used with all shells) Picture Size 5 QD shells or size 4-5 Std Shells P/N Inner diameter / cable diameter Outer diameter 2-2308349-4 1-2308348-1 3.0 4.0 2-2308349-3 1-2308348-2 3.5 4.5 2-2308349-2 1-2308348-3 4.0 5.0 Size 1-4 QD shells 1-3 Std Shells P/N 2-2308349-1 1-2308348-4 4.5 5.5 2-2308349-0 1-2308348-5 5.0 6.0 1-2308349-9 1-2308348-6 5.5 6.5 1-2308349-8 - 5.7 6.7 1-2308349-7 1-2308348-7 6.0 7.0 1-2308349-6 1-2308348-8 6.5 7.5 1-2308349-5 1-2308348-9 7.0 8.0 1-2308349-4 1-2308348-0 7.6 8.5 1-2308349-3 2-2308348-1 8.0 9.0 1-2308349-2 2-2308348-2 8.5 9.5 1-2308349-1 2-2308348-3 9.0 10.0 - 2-2308348-4 9.5 10.5 - 2-2308348-5 10.0 11.0 - 2-2308348-6 10.5 11.5 - 2-2308348-7 11.0 12.0 Crimp barrel (in combination wth crimp flanges) Picture Part Number Barrel Inner diameter/cable diameter Barrel Outer diameter Cable Jacket stripping tool 2119000-1 Crimp flange insert tool 1-2314418-1 for small size flanges 1-2314418-2 for large size flanges PN recommended crimp insert 1-2308350-1 5.0 6.0 1-2823558-8 1-2308350-2 5.5 6.5 1-2823558-9 1-2308350-3 6.0 7.0 2-2823558-0 1-2308350-4 6.5 7.5 2-2823558-1 1-2308350-5 7.0 8.0 2-2823558-2 1-2308350-6 7.5 8.5 2-2823558-3 1-2308350-7 8.0 9.0 2-2823558-4 1-2308350-8 8.5 9.5 2-2823558-5 1-2308350-9 9.0 1.0.0 2-2823558-6 2-2308350-0 9.5 10.5 2-2823558-7 2-2308350-1 10.0 11.0 2-2823558-8 2-2308350-2 10.5 11.5 2-2823558-9 2-2308350-3 11.0 12.0 3-2823558-0 2-2308350-4 11.5 12.5 3-2823558-1 2-2308350-5 11.7 13.0 3-2823558-2 2-2308350-6 12.0 13.0 3-2823558-3 2-2308350-7 12.5 13.5 3-2823558-4 2-2308350-8 13.0 14.0 3-2823558-5 2-2308350-9 13.7 15.0 3-2823558-6 3-2308350-0 14.0 15.0 3-2823558-7 3-2308350-1 14.5 15.5 3-2823558-8 3-2308350-2 16.0 17.0 3-2823558-9 Crimp tool 1-2823557-1 Crimp Insert X-2823558-X (see table for recommended crimp insert) D-Sub Backshells For D-Subminiature Connectors Cable Exit Options Option 2: Cable outlet with screws For quick and easy installation requiring no special tools our cable outlet with screws option suits those needing a fast and simple installation. With a two piece cable clamp to allow for effective strain relief this cable exit is fitted with ribs to prevent cable retention. Fits both Standard and Quick Lock hoods. Max compression to approx. 50% of the original volume Cable compressed by screws Ribs to prevent cable retention Ordering Information Fits on shells Standard shell Size 1-3 (small) Size 4-5 (Large) Quick Lock shell Size 1-4 Size 5 D-SUB BACKSHELLS /// DATA SHEET Cable diameter Part Number 4-7mm 1-2308272-1 7-10mm 1-2308272-2 9-12mm 1-2308272-3 11-14mm 1-2308272-4 8-10mm 1-2308272-5 11-14mm 1-2308272-6 14-16mm 1-2308272-7 D-Sub Backshells For D-Subminiature Connectors NOTES LET’S CONNECT We make it easy to connect with our experts and are ready to provide all the support you need. Just call your local support number or visit www.te.com/industrial to chat with a Product Information Specialist. TECHNICAL SUPPORT te.com/support-center Australia ......................... +86 400-820-6015 France .............................. +33 1-34-20-8686 Korea ..................................... +02-3415-4607 Austria ....................................... +43 1-9056-0 Germany ......................... +49 6151-607-1999 Latvia .................................... +37 2-6778-673 Belgium ............................... +31 73-6246999 Greece .............................. +97 1-4-347-0226 Lithuania .............................. +37 037426900 Brazil ................................. +55 11-2103-6000 Holland ................................ +31 73-6246999 Luxembourg ...................... +31 73-6246999 China ............................... +86 400-820-6015 Hungary ................................ +36 1-2892040 Netherlands ....................... +31 73-6246999 Czech Republic .............. +42 02-7201-1103 India ................................ +86 400-820-6015 New Zealand ................ +86 400-820-6015 Denmark .......................... +46 8-5072-5000 Ireland ................................... +1 800-882-391 Norway ............................. +46 8-5072-5000 Estonia ................................... +37 2677-8673 Italy .......................................... +39 011-4012111 Poland ................................. +48 22-4576750 Finland ............................. +46 8-5072-5000 Japan ................................... +044-844-8052 Portugal ............................. +34 91-6630420 te.com TE Connectivity, TE Connectivity (logo), Every Connection Counts are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or TE Connectivity completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be Data Solutions as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. © 2016 TE Connectivity Ltd. family of companies All Rights Reserved. 1-1773876-6 CC 0317 D-SUB BACKSHELLS /// DATASHEET