1-2350398-2

BUCHANAN PUSH-IN CLAMP PCB CONNECTORS Time saving connectivity TE Connectivity is expanding its Buchanan portfolio with Push-in clamp termination PCB Connectors to enable tool-less wire insertion of ferruled and unferruled wires. This saves up to 80% installation labor time vs. traditional screw-clamp termination, leading to important cost savings. The design of the PCB Connectors in 3.5 mm and 5.0 mm pitch consists of two-piece plug connectors with mating straight and right angle shrouded headers. TE engineers have designed this product range for use in control system applications to suit high density signal and power applications. FEATURES CUSTOMER BENEFITS • Compact dimensions with 3.5 mm and 5.0 mm pitch • Reduced labor costs due to shorter wiring time with Push-in clamp termination. • Push-in clamp termination • 2 - 16 poles available • Straight and right angle shrouded headers available APPLICATIONS • Servo/Inverter Drives • Industrial Controls/PLC • Safety Controls/Modules • Power Supply Units • HVAC INDUSTRIAL /// BUCHANAN PUSH-IN CLAMP PCB CONNECTORS • Various pitches and numbers of positions enables design flexibility in a wide range of applications. • Maintenance-free Push-in clamp technology gives higher uptime and reliability of manufacturing process equipment and control devices. • Products with Push-in clamp technology are also suitable for use in harsh environments. • Customer-specific versions are available to enable individual customized solutions. Buchanan Push-In Clamp PCB Connectors TERMINAL BLOCK VERTICAL PLUG (PITCH 3.5, 5.0 MM) ELECTRICAL MECHANICAL     IEC PITCH (mm) UL   Operating Voltage(V) Current(A) Wire Range Dielectric Withstand Wire Type Overvoltage category / Pollution degree III / 3 III / 2 II / 2 3.50 150 XX XX XX 5.00 300 160 XX 320 3.50 8 XX 5.00 16 XX 3.50 16-24 XX 5.00 12-26 • Wire Strip Length: 9.0-10.0 mm (3.50 mm pitch) 12.0-13.0 mm (5.00 mm pitch) • PCB Hole Diameter: min 1.3 mm • PCB Board Thickness: max 2.4 mm MATERIAL • Housing: Polyamide 66, UL 94V-0, Green XX • Terminals: Brass; Finish: Leadfree tin-plated • Push Button: Polyamide 66, Orange • Spring: Stainless steel 3.50 XX XX 5.00 2.5kV 2.5kV   Sol/Str Sol/Str Insulation Resistance >2000MΩ (500V DC) Contact Resistance