1-2405080-2

AHV SERIES THREE PHASE VERY HIGH PERFORMANCE EMI FILTER Dual stage delta configuration INTRODUCTION Bookshelf design for motor drive applications requiring minimum space and convenient installation with superior performance at significant interference levels APPLICATION • • • • • IT power distribution network Three phase drives Renewable energy systems Process automation equipments Energy conversion devices STANDARD FEATURES • • • • Superior performance Compact Low leakage current Book shelf mounting APPROVALS & COMPLIANCE • UL recognized as per UL 60939-3 and CSA22.2 No 8 TYPICAL CIRCUIT DIAGRAM Specifications Electrical Characteristics Agency Rated Voltage Current Ratings Operating Frequency Line to Line: 760/750VAC 7A to 180A @ 40°C 50/60Hz Line to Ground: 3535VDC for 1 Minute High Potential Test Voltage Line to Line: 3268VDC for 1 Minute Overload Capability 135% of Rated current for 15 minutes AHV Series Dual Stage Delta Configuration Functional Characteristics Operating Temperature Range -25°C to +85°C Climatic Category 25/85/21 Termination (Depends on Current Rating) Quick Connect 7A to 180A Flammability Corresponding to UL 94 V-0 Reference Standards Design Corresponding to UL 60939-3 and CSA 22.2 No 8 Selection Table – Standard Version TE Ordering Number Catalog Number Rated Current @40°C Rated Voltage @40°C Leakage Current (mA) Weight (Kgs) Termination 2405080-1 7 AHV D BS 7A 760 5mA 2 1 2405080-2 10 AHV D BS 10A 760 5mA 2 1 2405080-3 16 AHV D BS 16A 760 5mA 3 1 2405080-4 20 AHV D BS 20A 760 5mA 3 1 2405080-5 25 AHV D BS 25A 760 5mA 3 1 2405080-6 30 AHV D BS 30A 760 5mA 4 1 2405080-7 42 AHV D BS 42A 760 5mA 4 1 2405080-8 55 AHV D BS 55A 760 5mA 4 1 2405080-9 63 AHV D BS 63A 760 6mA 5 1 1-2405080-0 75 AHV D BS 75A 760 6mA 5 1 1-2405080-1 80 AHV D BS 80A 760 6mA 5 1 1-2405080-2 90 AHV D BS 90A 760 6mA 6 2 1-2405080-3 100 AHV D BS 100A 760 6mA 6 2 1-2405080-4 130 AHV D BS 130A 760 6mA 7 3 1-2405080-5 150 AHV D BS 150A 760 6mA 8 3 1-2405080-6 180 AHV D BS 180A 760 6mA 12 4 INDUSTRIAL / AHV SERIES 2 AHV Series Dual Stage Delta Configuration Termination Type: Connectors Cross Section Range; Flexible (mm2) 1 2 3 4 0.5 - 16 10 - 25 16 - 50 35 - 95 Insertion Loss (Typical) – Measured in Closed 50Ω System Common Mode 50Ω/50Ω Current Rating Frequency in MHz 0.01 0.05 0.15 0.5 1 3 5 10 30 7A 14.1 28.7 64 78.3 77 68.3 60 48.1 37.8 10A 12 21 60 80 70 62 56 45 25 16A 10.5 15.6 58.3 97.9 79.6 61.4 54 44.2 19.5 20A 9 12 55 80 75 57 52 42 15 25A 8.28 10.9 50.4 76.6 80.1 62.6 55.6 44.5 30.4 30A 5.6 7 35 60 68 57 44 32 18 42A 2.3 5.6 27.2 60 65 52 42 30 20 55A 1.03 9.65 25.7 58.9 73.4 63.4 56.4 47.6 44.8 63A 0.88 5.2 23.4 57 68 58 52 42 38 75A 0.75 3.5 19.5 51 62 55 48 35 22 80A 0.52 2 10 35 40 47 41 30 18 90A 0.3 1.2 6 28 41 50 40 28 20 100A 0.178 0.794 4.29 18.3 30.5 51.2 45.9 39.9 25.5 130A 0.16 0.9 4.5 20 32 55 40 32 20 150A 0.15 1.1 4.5 22 35 55 38 30 21 180A 0.162 1.27 4.73 33.5 41.6 54.4 48.3 40.8 25.3 INDUSTRIAL / AHV SERIES 3 AHV Series Dual Stage Delta Configuration Differential Mode 50Ω/50Ω Current Rating Frequency in MHz 0.01 0.05 0.15 0.5 1 3 5 10 30 7A 16.2 34.7 60.4 58.4 57.9 56.6 55.7 54.4 46.2 10A 18 28 55 56 62 60 57 50 42 16A 17.1 22.9 70.1 77.3 80.4 80.8 79.6 79.5 57.6 20A 18 20 55 50 62 65 60 50 32 25A 17.7 18.6 34.7 23.5 17.5 12.2 7.4 9.6 25.5 30A 15 18 27 62 68 20 18 15 12 42A 12 25 30 65 68 18 14 13 10 55A 18.2 27 32.6 80.3 97.4 78.6 75.3 72.4 63.8 63A 16 25 29 75 80 70 68 64 42 75A 13.6 22.3 27 70 76 67 63 61 37 80A 10 18 24 67 70 55 50 47 31 90A 12 22 28 57 60 50 45 38 24 100A 29 40.4 61.4 65 53.8 45 42.6 40.1 32.3 130A 25 35 58 67 55 47 41 38 30 150A 25 37 60 63 56 48 42 40 27 180A 29 38.3 65 65 58.4 50.87 48.4 45.8 37 Mechanical Diagram 7A to 10A INDUSTRIAL / AHV SERIES 16A to 42A 4 AHV Series Dual Stage Delta Configuration 55A 63A to 80A 90A 100A 130A and 150A 180A INDUSTRIAL / AHV SERIES 5 HOW TO ORDER Part Number 10 - AHV - D BS Current Rating 10 Series Type AHV Filter Stage D Dual Book Shelf BS te.com ©2022 TE Connectivity. All Rights Reserved. TE Connectivity, TE Connectivity (logo) and Every Connection Counts are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. 08/22   TJ INDUSTRIAL / AHV SERIES