1-284506-5

4 C 2 3 1 REVISIONS 2020 TE Connectivity. All Rights Reserved. P LTR C4 C5 C6 C7 D A DESCRIPTION DATE DWN APVD REVISED PER ECO-11-005009 12MAR2011 HMR CR NEW P/N 3-284506-1 ADDED 04NOV2016 FP NG PART OBSOLETE 31AUG2020 DV PS 3-284506-1 MADE OBSOLETE 27DEC2021 SCB PS D 11.1 MATING FACE 15.5 WIRE ENTRY 1.75 REF 5 3.5 TYP C 9 6 6 8 6 7 6 TIN 14.0 4 3-284506-1 TIN 10.5 3 2-284506-9 TIN 10.5 OBSOLETE 0.8 MICRON GOLD GOLD FLASH 6 0.2 MICRON GOLD POLARIZATION KEY SLOT TIN 1 2. CLAMPING SCREW 3. B TIN MATERIALS AND FINISH HOUSING : PA 6.6, UL 94-V0, COLOR GREEN CLAMP : BRASS, NICKEL PLATED. TERMINAL : BRASS, PLATING: SEE TABLE. CONTACT SPRING : PHOSPHOR BRONZE, TIN PLATED CLAMPING SCREW : M2, BRASS, NICKEL PLATED TIN TIN 6 PRELIMINARY - NOT FOR PRODUCTION. 7 WITH SPECIAL CODING LOCATED IN POSITIONS 1 AND 3. MATES WITH 3-284512-8. TIN WITH SPECIAL CODING LOCATED IN POSITION 2. MATES WITH 3-284512-9. TIN 8 9 SPECIAL MARKING. REFER THE DRAWING. 05FEB2002 E. ZANOLINI CHK 05FEB2002 E. ZANOLINI APVD 05FEB2002 D. BIEVENOUR 1-284506-6 1-284506-5 1-284506-4 13 1-284506-3 12 1-284506-2 11 1-284506-0 9 284506-9 8 284506-8 7 284506-7 6 284506-6 5 14.0 284506-5 4 10.5 284506-4 3 7.0 284506-3 2 NO OF POSN A B 1-284506-1 10 17.5 TERMINAL PLATING 1-284506-7 14 21.0 TIN 1-284506-8 15 24.5 TIN 1-284506-9 16 28.0 TIN 2-284506-0 17 31.5 TIN 2-284506-1 18 35.0 TIN 2-284506-2 19 38.5 TIN 2-284506-3 20 42.0 TIN 2-284506-4 21 45.5 TIN 2-284506-5 22 49.0 TIN 2-284506-6 23 52.5 TIN TOLERANCE NOT CUMULATIVE. 24 C 2-284506-7 25 56.0 TIN 5 84.0 87.5 59.5 TIN 4. OPERATING TEMPERATURE RANGE: -40°C TO +110°C 12 63.0 TIN OBSOLETE 42.0 66.5 TIN 2-284506-8 7 70.0 TIN ELECTRICAL WIRE RANGE : 30 - 14 AWG MAX. VOLTAGE : 300 V MAX CURRENT : 11 A CONTACT RESISTANCE : < 15 m Ohm INSULATION RESISTANCE : > 1000 M Ohm (500V DC) 24.5 73.5 TIN 3-284506-0 3 77.0 TIN OBSOLETE 10.5 80.5 TIN MECHANICAL RECOMMENDED/ HIGHEST TIGHTENING TORQUE : 0.25/0.25 Nm WIRE STRIPPING LENGTH : 5 - 6 mm 3 284506-2 PART NUMBER DWN THIS DRAWING IS A CONTROLLED DOCUMENT. A DIMENSIONS: mm P/N 284506-3 AS SHOWN 3-284056-1 MATERIAL 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES 0.3 0.25 - FINISH 1 1471-9 (3/13) TOLERANCES UNLESS OTHERWISE SPECIFIED: 1 PRODUCT SPEC 108-20166 APPLICATION SPEC 2º 114-20079 WEIGHT CUSTOMER DRAWING TE Connectivity A NAME TERMINAL BLOCK PLUG STACKING 3.5mm PITCH - SIZE RESTRICTED TO CAGE CODE DRAWING NO A200779 284506 SCALE 5:1 SHEET 1 OF 1 C7 REV