1-406374-0

110Connect Enhanced Category 5 Jacks 406372-X, 406374-X Description AMP Enhanced Category 5 110Connect Modular Jacks exceed the TIA requirements for Category 5e performance. They comply with all of the performance requirements for current and proposed applications such as Gigabit Ethernet, 100BASE-Tx, token ring, 155 Mbps ATM, 100 Mbps TP-PMD, ISDN, analog (broadband [550 MHz], baseband) and digital video and voice. The universal wiring label permits field installation to either T568A or T568B wiring while simplifying ordering and inventory. The 110Connect punchdown blocks are compatible with both 110 and Krone single wire tools. Specification (Text in brackets [ ] requires a choice.) Modular jacks shall be [unkeyed or keyed], 4-pair and shall meet the performance requirements listed in the following table [include Performance Characteristics table from back page] in addition to all other standard Category 5 performance requirements. Modular jacks shall fit in a .790" X .582" opening. Modular jacks shall be terminated using a 110-style pc board connector, color-coded for both T568A and T568B wiring. Each jack shall be wired to [T568A or T568B]. Modular jacks shall be UL Listed under file number E81956. Modular jacks shall be AMP NETCONNECT part number [406372-X or 406374-X (X indicates color)]. Part Number Description 406372-X Category 5e modular jack, unshielded, unkeyed 406374-X Category 5e modular jack, unshielded, keyed X denotes color: -1 = Almond, -2 = Black, -3 = White, -4 = Gray, -5 = Orange, -6 = Blue, -7 = Red, -8 = Yellow, -9 = Green, 1- -0 = Violet, 1- -1 = Electrical Ivory 110Connect Enhanced Category 5 Jacks 406372-X, 406374-X Typical Worst-Case Performance Characteristics (exceed TIA/EIA-568-B.2 Category 5e) Frequency, Attenuation, dB NEXT, dB PS NEXT, dB FEXT, dB MHz Spec AMP Spec AMP Spec AMP Spec AMP 1 0.1 0.03 65.0 84.7 – 82.7 65.0 79.7 4 0.1 0.03 65.0 74.1 – 71.7 63.1 71.8 8 0.1 0.03 64.9 68.2 – 66.0 57.0 66.2 10 0.1 0.03 63.0 66.2 – 64.0 55.1 64.3 16 0.2 0.04 58.9 62.2 – 60.0 51.0 60.5 20 0.2 0.05 57.0 60.2 – 58.0 49.1 58.6 25 0.2 0.06 55.0 58.2 – 56.0 47.1 56.7 31.25 0.2 0.07 53.1 56.2 – 54.1 45.2 54.8 62.5 0.3 0.07 47.1 49.9 – 47.4 39.2 48.9 100 0.4 0.11 43.0 46.5 – 43.2 35.1 44.7 Return Loss, dB Spec 35.0 35.0 35.0 35.0 35.0 34.0 32.0 30.1 24.1 20.0 AMP 55.9 50.3 45.7 44.0 40.5 38.8 37.0 35.2 29.7 26.2 Durability: Modular jack - 750 mating cycles 110 Block - 200 termination cycles Materials: Housing - polyphenylene oxide, 94V-0 rated. 110 Blocks - polycarbonate, 94V-0 rated. Jack contacts - phosphorous bronze, plated with 1.27 µm [.000050] thick gold in localized area and 3.81 µm [.000150] minimum thick tin-lead in solder area over 1.27 µm [.000050] minimum thick nickel underplate. Mounting panel thickness: 1.473 - 1.600 mm [.058 - .063"]. Packaging: 1 per bag/25 bags per carton, weight - 0.87 lb/carton Approvals: UL File Number E81956, CSA Specifications subject to change without notice. In the U.S.1-800-553-0938 Canada 905-475-6222 Mexico 525-729-0400 South and Central Americas 54-11-4733-2200 www.ampnetconnect.com e-mail: networking.help@tycoelectronics.com © Copyright 2001 Tyco Electronics Corporation. All rights reserved. AMP and NETCONNECT are trademarks. Revised 11/01.