Statement of Compliance
Requested Part
30 September 2016
7-530843-0
(Part 1 of 1)
CONN SEC II 31 POS 100C/L
Part Status:
Mil-Spec Certified:
EU RoHS:
Superseded
No
Not Compliant
Substances: Pb
EU ELV:
China RoHS:
Not Yet Reviewed
Restricted Materials Above Threshold
Each REACH declaration statement below refers ONLY to the specific SVHCs published to the REACH Candidate List on the
Month/Year indicated. TE does not currently provide a cumulative REACH statement related to the most recent Date of Inclusion, or to
the total number of substances on the Candidate List.
REACH Oct 2008 SvHC Compliance:
Contains no REACH October 2008 SvHC(s)
REACH Jan/Mar 2010 SvHC Compliance:
Contains no REACH Jan/Mar 2010 SvHC(s)
REACH June 2010 SvHC Compliance:
REACH December 2010 SvHC Compliance:
REACH June 2011 SvHC Compliance:
REACH December 2011 SvHC Compliance:
REACH June 2012 SvHC Compliance:
REACH December 2012 SvHC Compliance:
REACH June 2013 SvHC Compliance:
REACH December 2013 SvHC Compliance:
REACH June 2014 SvHC Compliance:
Contains no REACH June 2010 SvHC(s)
Contains no REACH December 2010 SvHC(s)
Contains no REACH June 2011 SvHC(s)
Contains no REACH December 2011 SvHC(s)
Contains no REACH June 2012 SvHC(s)
Contains no REACH December 2012 SvHC(s)
Contains no REACH June 2013 SvHC(s)
Contains no REACH December 2013 SvHC(s)
Contains no REACH June 2014 SvHC(s)
This information is provided based on reasonable inquiry of our suppliers and represents our current actual knowledge based on the information they provided. This information is subject to change.
The part numbers that TE has identified as EU RoHS compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, mercury, PBB, PBDE, and 0.01% for cadmium, or qualify for an
exemption to these limits as defined in the Annexes of Directive 2011/65/EU (RoHS2). Finished electrical and electronic equipment products will be CE marked as required by Directive 2011/65/EU. Components may not be CE marked.
Additionally, the part numbers that TE has identified as EU ELV compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, and mercury, and 0.01% for cadmium, or qualify for an
exemption to these limits as defined in the Annexes of Directive 2000/53/EC (ELV).
Regarding the REACH Regulations, TE’s information on SVHC’s in articles is currently based on the European Chemicals Agency (ECHA) ‘Guidance on requirements for substances in articles’ (Version: 2, April 2011), applying the 0.1% weight
on weight concentration threshold at the finished product level. TE is aware of the European Court of Justice ruling of September 10th, 2015 stating that, in case of ‘complex articles’, the threshold for a SVHC must be applied to both the
product as a whole and simultaneously to each of the articles forming part of its composition. To make sure our REACH information stays in line with the changed legal interpretation and industry practices, TE is monitoring evaluations of this
ruling and awaits the expected new ECHA guidance on the practical implementation.
Page 1 of 5
REACH December 2014 SvHC Compliance:
REACH June 2015 SvHC Compliance:
REACH December 2015 SvHC Compliance:
REACH June 2016 SvHC Compliance:
Halogen Content:
Solder Process Capability Code:
Not reviewed for REACH December 2014 SvHC(s)
Not Reviewed for REACH June 2015 SvHC(s)
Not Reviewed for REACH December 2015 SvHC(s)
Not Reviewed for REACH June 2016 SvHC(s)
Not Low Halogen - contains Br or Cl > 900 ppm.
Wave solder capable to 265°C
Guy Degrieck
Manager, Product Environmental Compliance
TE Connectivity
1050 Westlakes Drive
Berwyn, PA 19312
This information is provided based on reasonable inquiry of our suppliers and represents our current actual knowledge based on the information they provided. This information is subject to change.
The part numbers that TE has identified as EU RoHS compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, mercury, PBB, PBDE, and 0.01% for cadmium, or qualify for an
exemption to these limits as defined in the Annexes of Directive 2011/65/EU (RoHS2). Finished electrical and electronic equipment products will be CE marked as required by Directive 2011/65/EU. Components may not be CE marked.
Additionally, the part numbers that TE has identified as EU ELV compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, and mercury, and 0.01% for cadmium, or qualify for an
exemption to these limits as defined in the Annexes of Directive 2000/53/EC (ELV).
Regarding the REACH Regulations, TE’s information on SVHC’s in articles is currently based on the European Chemicals Agency (ECHA) ‘Guidance on requirements for substances in articles’ (Version: 2, April 2011), applying the 0.1% weight
on weight concentration threshold at the finished product level. TE is aware of the European Court of Justice ruling of September 10th, 2015 stating that, in case of ‘complex articles’, the threshold for a SVHC must be applied to both the
product as a whole and simultaneously to each of the articles forming part of its composition. To make sure our REACH information stays in line with the changed legal interpretation and industry practices, TE is monitoring evaluations of this
ruling and awaits the expected new ECHA guidance on the practical implementation.
Page 2 of 5
30 September 2016
中国电子电气产品中有害物质的名称及含量
China EEP Hazardous Substance Information
Restricted Materials Above Threshold
有害物质
Hazardous Substance
部件名称
(Component Name)
7-530843-0
连接器系统
(Connector Systems)
铅
(Pb)
汞
(Hg)
镉
(Cd)
六价铬
(Cr6)
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
X
O
O
O
O
O
本表格依据SJ/T 11364标准的规定编制。
This table is compiled according to SJ/T 11364 standard.
O:
表示该有害物质在该部件所有均质材料中的含量均在GB/T 26572标准规定的限量要求以下。
Indicates that the concentration of the hazardous substance in all homogeneous materials of the part is
below the relevant threshold of the GB/T 26572 standard.
X:
表示该有害物质至少在该部件的某一均质材料中的含量超出GB/T 26572标准规定的限量要求。
Indicates that the concentration of the hazardous substance in at least one homogeneous material of the
part is above the relevant threshold of the GB/T 26572 standard.
电子电气产品的环保使用期限依据SJ/T 11388标准的规定确定。
The EPUP value of EEP is defined according to SJ/T 11388 standard.
This information is provided based on reasonable inquiry of our suppliers and represents our current actual knowledge based on the information they provided. This information is subject to change.
The part numbers that TE has identified as EU RoHS compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, mercury, PBB, PBDE, and 0.01% for cadmium, or qualify for an
exemption to these limits as defined in the Annexes of Directive 2011/65/EU (RoHS2). Finished electrical and electronic equipment products will be CE marked as required by Directive 2011/65/EU. Components may not be CE marked.
Additionally, the part numbers that TE has identified as EU ELV compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, and mercury, and 0.01% for cadmium, or qualify for an
exemption to these limits as defined in the Annexes of Directive 2000/53/EC (ELV).
Regarding the REACH Regulations, TE’s information on SVHC’s in articles is currently based on the European Chemicals Agency (ECHA) ‘Guidance on requirements for substances in articles’ (Version: 2, April 2011), applying the 0.1% weight
on weight concentration threshold at the finished product level. TE is aware of the European Court of Justice ruling of September 10th, 2015 stating that, in case of ‘complex articles’, the threshold for a SVHC must be applied to both the
product as a whole and simultaneously to each of the articles forming part of its composition. To make sure our REACH information stays in line with the changed legal interpretation and industry practices, TE is monitoring evaluations of this
ruling and awaits the expected new ECHA guidance on the practical implementation.
Page 3 of 5
RoHS Equivalent Part(s) for Part 7-530843-0
30 September 2016
7-5530843-0
CONN SEC II 31 POS 100C/L
Part Status:
Mil-Spec Certified:
Active
No
EU RoHS:
Compliant
EU ELV:
Compliant
China RoHS:
(Equivalent Part 1 of 1)
No Restricted Materials Above Threshold
Each REACH declaration statement below refers ONLY to the specific SVHCs published to the REACH Candidate List on the
Month/Year indicated. TE does not currently provide a cumulative REACH statement related to the most recent Date of Inclusion, or to
the total number of substances on the Candidate List.
REACH Oct 2008 SvHC Compliance:
Contains no REACH October 2008 SvHC(s)
REACH Jan/Mar 2010 SvHC Compliance:
Contains no REACH Jan/Mar 2010 SvHC(s)
REACH June 2010 SvHC Compliance:
REACH December 2010 SvHC Compliance:
REACH June 2011 SvHC Compliance:
REACH December 2011 SvHC Compliance:
REACH June 2012 SvHC Compliance:
REACH December 2012 SvHC Compliance:
REACH June 2013 SvHC Compliance:
REACH December 2013 SvHC Compliance:
REACH June 2014 SvHC Compliance:
REACH December 2014 SvHC Compliance:
REACH June 2015 SvHC Compliance:
Contains no REACH June 2010 SvHC(s)
Contains no REACH December 2010 SvHC(s)
Contains no REACH June 2011 SvHC(s)
Contains no REACH December 2011 SvHC(s)
Contains no REACH June 2012 SvHC(s)
Contains no REACH December 2012 SvHC(s)
Contains no REACH June 2013 SvHC(s)
Contains no REACH December 2013 SvHC(s)
Contains no REACH June 2014 SvHC(s)
Not reviewed for REACH December 2014 SvHC(s)
Not Reviewed for REACH June 2015 SvHC(s)
This information is provided based on reasonable inquiry of our suppliers and represents our current actual knowledge based on the information they provided. This information is subject to change.
The part numbers that TE has identified as EU RoHS compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, mercury, PBB, PBDE, and 0.01% for cadmium, or qualify for an
exemption to these limits as defined in the Annexes of Directive 2011/65/EU (RoHS2). Finished electrical and electronic equipment products will be CE marked as required by Directive 2011/65/EU. Components may not be CE marked.
Additionally, the part numbers that TE has identified as EU ELV compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, and mercury, and 0.01% for cadmium, or qualify for an
exemption to these limits as defined in the Annexes of Directive 2000/53/EC (ELV).
Regarding the REACH Regulations, TE’s information on SVHC’s in articles is currently based on the European Chemicals Agency (ECHA) ‘Guidance on requirements for substances in articles’ (Version: 2, April 2011), applying the 0.1% weight
on weight concentration threshold at the finished product level. TE is aware of the European Court of Justice ruling of September 10th, 2015 stating that, in case of ‘complex articles’, the threshold for a SVHC must be applied to both the
product as a whole and simultaneously to each of the articles forming part of its composition. To make sure our REACH information stays in line with the changed legal interpretation and industry practices, TE is monitoring evaluations of this
ruling and awaits the expected new ECHA guidance on the practical implementation.
Page 4 of 5
REACH December 2015 SvHC Compliance:
REACH June 2016 SvHC Compliance:
Halogen Content:
Solder Process Capability Code:
Not Reviewed for REACH December 2015 SvHC(s)
Contains no REACH June 2016 SvHC(s)
Not Low Halogen - contains Br or Cl > 900 ppm.
Wave solder capable to 265°C
This information is provided based on reasonable inquiry of our suppliers and represents our current actual knowledge based on the information they provided. This information is subject to change.
The part numbers that TE has identified as EU RoHS compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, mercury, PBB, PBDE, and 0.01% for cadmium, or qualify for an
exemption to these limits as defined in the Annexes of Directive 2011/65/EU (RoHS2). Finished electrical and electronic equipment products will be CE marked as required by Directive 2011/65/EU. Components may not be CE marked.
Additionally, the part numbers that TE has identified as EU ELV compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, and mercury, and 0.01% for cadmium, or qualify for an
exemption to these limits as defined in the Annexes of Directive 2000/53/EC (ELV).
Regarding the REACH Regulations, TE’s information on SVHC’s in articles is currently based on the European Chemicals Agency (ECHA) ‘Guidance on requirements for substances in articles’ (Version: 2, April 2011), applying the 0.1% weight
on weight concentration threshold at the finished product level. TE is aware of the European Court of Justice ruling of September 10th, 2015 stating that, in case of ‘complex articles’, the threshold for a SVHC must be applied to both the
product as a whole and simultaneously to each of the articles forming part of its composition. To make sure our REACH information stays in line with the changed legal interpretation and industry practices, TE is monitoring evaluations of this
ruling and awaits the expected new ECHA guidance on the practical implementation.
Page 5 of 5
