1-557958-6

Instruction Sheet 408-- 10066 Cable Assembly with Power Strip 557958- [ ] 27 APR 10 Rev C Power Strip Assembly 557958--1, 557958--2, 557958--3, and 557958--4 (See Figure 2 for “L” Dimensions) L2 A W S (7 Plc) L1 To obtain information on AMP NETCONNECT* products, call PRODUCT INFORMATION at the number at the bottom of this page, or visit the AMP NETCONNECT website at www.ampnetconnect.com. Wrap-- Around Mounting Bracket PART NUMBER 557958--1 557958--2 QTY-- TYPE OF REC 8--15A Simplex 8--15A Simplex MIN-- MAX CABLE LENGTH DIM 3048.00--3073.40 [120.00--121.00] 3048.00--3073.40 [120.00--121.00] SPACING OF REC 60.96 [2.40] 60.96 [2.40] PROTECTED LINE NO. 1 2 557958--3 557958--4 8--15A Simplex 8--15A Simplex 3048.00--3073.40 [120.00--121.00] 3048.00--3073.40 [120.00--121.00] 60.96 [2.40] 60.96 [2.40] 3 4 1--557958--1 1--557958--2 1--557958--3 6--15/20A Simplex 6--15/20A Simplex 6--15/20A Simplex 914.40--927.10 [36.00--36.50] 914.40--927.10 [36.00--36.50] 914.40--927.10 [36.00--36.50] 200.03 [7.875] 200.03 [7.875] 200.03 [7.875] 1 2 3 1--557958--4 1--557958--5 6--15/20A Simplex 6--15/20A Simplex 1676.40--169545 [66.00--66.75] 1676.40--169545 [66.00--66.75] 200.03 [7.875] 200.03 [7.875] 1 2 1--557958--6 1--557958--7 6--15/20A Simplex 6--15/20A Simplex 1676.40--169545 [66.00--66.75] 1371.60--1390.65 [54.00--54.75] 200.03 [7.875] 200.03 [7.875] 3 1 1--557958--8 1--557958--9 6--15/20A Simplex 6--15/20A Simplex 1371.60--1390.65 [54.00--54.75] 1371.60--1390.65 [54.00--54.75] 200.03 [7.875] 200.03 [7.875] 2 3 Figure 1 1. INTRODUCTION 2. DESCRIPTION This instruction sheet provides the mounting procedures for the Cable Assembly Power Strip Kits (557958--[ ]) shown in Figure 1 and Figure 2. This cable assembly power strip is designed to be mounted vertically or horizontally. The installation should be on a surface that will minimize foreign objects or liquids from entering the receptacle(s). It is recommended that the power strip be mounted on a surface other than a work surface. This cable assembly power strip kit is ideal for use in garages, workshops, office areas, and display areas where power is required for tools and appliances. NOTE i All dimensions are in metric units [with U.S. customary units in brackets]. Figures and illustrations are for reference only, and are not drawn to scale. The cable assembly power strip is UL Listed in UL File E132626. Electrical Ratings: 20 Ampere Rated Units -- 120 VAC, 20 A, 2400 Watts TOOLING ASSISTANCE CENTER 1-- 800-- 722-- 1111 E2010 Tyco Electronics Corporation, Berwyn, PA PRODUCT INFORMATION 1-- 800-- 522-- 6752 All Rights Reserved TE logo and Tyco Electronics are trademarks. *Trademark. Other product names, logos, or company names might be trademarks of their respective owners. This controlled document is subject to change. For latest revision and Regional Customer Service, visit our website at www.tycoelectronics.com 1 of 2 LOC B 408- 10066 Cable Assembly with Power Strip 557958- [ ] Power Strip Assembly 1--557958--1, 1--557958--2, 1--557958--3, and 1--557958--4 1--557958--5, 1--557958--6, 1--557958--7, 1--557958--8, and 1--557958--9 L2 A W S (5 Plc) L1 Clamp Bracket PART NUMBER QTY-- TYPE OF RECEPTACLE 557958--1 557958--2 8 15A Simplex 8--15A 557958--3 557958--4 1--557958--1 1--557958--2 1--557958--3 1--557958--4 1--557958--5 CABLE ASSY POWER STRIP DIMENSIONS LENGTH1 / LENGTH2 / WIDTH / HEIGHT 3657.60 [144.00] / 609.60 [24.00] / 44.70 [1.76] / 41.15 [1.62] 3657.60 [144.00] / 609.60 [24.00] / 44.70 [1.76] / 41.15 [1.62] 3657.60 [144.00] / 609.60 [24.00] / 44.70 [1.76] / 41.15 [1.62] 3657.60 [144.00] / 609.60 [24.00] / 44.70 [1.76] / 41.15 [1.62] MOUNTING BRACKET TYPE Wrap--Around Wrap Around Mountingg Bracket 2012.95 [79.25] / 1098.55 [43.25] / 37.59 [1.48] / 27.43 [1.08] 2012.95 [79.25] / 1098.55 [43.25] / 37.59 [1.48] / 27.43 [1.08] 2012.95 [79.25] / 1098.55 [43.25] / 37.59 [1.48] / 27.43 [1.08] 66--15/20A 5/ 0 Simplex S pe 2774.95 [109.25] / 1098.00 [43.25] / 37.59 [1.49] / 27.43 [1.08] 2774.95 [109.25] / 1098.00 [43.25] / 37.59 [1.49] / 27.43 [1.08] 1--557958--6 1--557958--7 1--557958--8 2774.95 [109.25] / 1098.00 [43.25] / 37.59 [1.49] / 27.43 [1.08] 2489.20 [98.00] / 1117.60 [44.00] / 37.85 [1.49] / 27.43 [1.08] 2489.20 [98.00] / 1117.60 [44.00] / 37.85 [1.49] / 27.43 [1.08] 1--557958--9 2489.20 [98.00] / 1117.60 [44.00] / 37.85 [1.49] / 27.43 [1.08] Clamp C a p Bracket ac et Figure 2 DANGER NOTE i To reduce the risk of external shock, use indoor in dry locations only. Not for use in wet or damp locations. Plug the unit into a grounded outlet only. Mounting devices shall be located no more than 121.9 cm [48 in.] apart. 3. Position the power strip over the clips, and firmly press to lock in. 4. To remove the power strip from the mounting clips, grasp the body and slide until clear. 4. REVISION SUMMARY 3. MOUNTING PROCEDURES 1. Drill holes as required for the number of mounting clips provided. 2 of 2 2. Secure the mounting clips to the mounting surface with #8 or #10 flat--head screws, (customer supplied), at a distance not to exceed 1/3 the length of the power strip. S Updated document to corporate requirements S Revised document to match document part number revision Tyco Electronics Corporation Rev C