1-770669-1

7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION 6 5 4 3 2 1 20 REVISIONS ALL RIGHTS RESERVED. BY - P LTR 770669-2 & 1-770669-2 770669-4 KEY LOCATION SCALE 2:1 & 1-770669-4 770669-5 KEY LOCATION SCALE 2:1 & 1-770669-5 KEY LOCATION SCALE 2:1 DATE APVD REVISED PER ECO-19-009419 20JUN2019 DS DS K13 REVISED PER ECO-20-004256 26MAR2020 JM DS K14 REVISED PER PCN E-20-016603 24NOV2020 PN DS REVISED PER ECN-21-123056 08NOV2021 DK CB 1 SUGGESTED MOUNTING SCREW SIZE IS n 2.50-3.00mm [ n 0.099 - 0.118 INCH] SELF TAPPING THREAD FORMING SCREW, SUCH AS DELTA PT, TO BE DRIVEN AT 0.6-0.8 N-m THE CUSTOMER SHOULD TEST THE SCREW SIZE AND TYPE IN ORDER TO VERIFY THEIR SELECTION FOR THEIR APPLICATION 2 DATE CODE TO BE BRANDED IN THIS LOCATION PER TE SPEC 102-60 USE 5 DIGIT CODE: FIRST 2 DIGITS = YEAR, SECOND 2 DIGITS = WEEK LAST DIGIT = DAY 3 HOUSING COLORS ARE MECHANICALLY KEYED TO MATE ONLY WITH IDENTICALLY COLORED PLUG ASSEMBLIES 4 DWN K12 L D DESCRIPTION D MATERIALS: HEADER HOUSING - GLASS FILLED PBT PINS: TIN OR GOLD PLATED BRASS 5. HEADER MATES TO PLUG ASSEMBLY 770680 WHICH USES REELED TERMINALS 770520 OR LOOSE PIECE TERMINALS 770854 ( 19.3 ) ( 60.8 ) ( 18.6 ) 1 ( 8.00 ) 47.4 (7.30-7.75) ( 43.4 ) ( 0.75 ) ( 2.0 ) C C 18.1 ( 32.1 ) ( 23.6 ) (3.0-4.0) 4X ( ( R 5.0 ) B 2.17 ) 1 HOUSING ( 2.0 ) CONTACTS B ( 5.8 ) 50.4 ( 9.8 ) ( 13.8 ) SECTION 770669-1 A-A KEY LOCATION AS SHOWN 2 A THIS DRAWING IS A CONTROLLED DOCUMENT. DIMENSIONS: mm TOLERANCES UNLESS OTHERWISE SPECIFIED: 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES MATERIAL 0.2 - FINISH 4 4805 (3/13) & 1-770669-1 4 DWN 31DEC2002 CHK 31DEC2002 APVD 31DEC2002 R. VESTAL D. CROWE D. CROWE NAME 108-1329 WEIGHT 28.74g CUSTOMER DRAWING 1-770669-5 GOLD GRAY 1-770669-4 GOLD NATURAL 1-770669-2 GOLD BLACK 1-770669-1 TIN BLUE 770669-5 TIN GRAY 770669-4 TIN NATURAL 770669-2 TIN BLACK 770669-1 HEADER COLOR 3 A PART NUMBER TE Connectivity APPLICATION SPEC 114-16016 BLUE PLATING PRODUCT SPEC - GOLD SIZE HEADER ASSEMBLY, 23 POSITION, RIGHT ANGLE AMPSEAL CAGE CODE A1 00779 DRAWING NO 770669 SCALE 2:1 RESTRICTED TO SHEET 1 OF - 2 REV L 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION 6 5 4 3 2 1 20 REVISIONS ALL RIGHTS RESERVED. BY - P LTR - DESCRIPTION DATE SEE SHEET 1 DWN APVD - - - 47.4 10.0 1.5 5 MAX 3.30 3.00 4X AMPSEAL HEADER SEALING SURFACE D D 2.0 18.1 25.2 24.8 4.7 Ra MAX 0.4 2.0 SECTION Z-Z OPTIONAL CONSTRUCTION IF THICKNESS IS GREATER THAN 2.0 SCALE 6:1 5.0 MOUNTING PANEL OR MODULE ( 2.95 ) C 44.5 44.0 R 6.60 -6.80 5 MAX 50.4 RECOMMENDED MOUNTING HOLE LAYOUT SCALE SEALING SURFACE C MOUNTING SCREW (4) TORQUE TO 0.6N-m TO 0.8N-m 2:1 45 $ FOR 5.0 MAX THICK PANEL 4.7 Ra MAX 0.4 1.0 SECTION Z-Z OPTIONAL CONSTRUCTION IF THICKNESS IS GREATER THAN 2.0 SCALE 6:1 2.85 B 0.08 -A- 23X 1.75 2.85 AFTER PLATING X PLACES 0.5 B 0.08 2 PLACES SCALE 4 ENSURE THE HEADER IS FLUSH TO THE PANEL FACE ALL AROUND BEFORE TIGHTENING TO FINAL TORQUE 2:1 4 9 6.5 A 4 2 RECOMMENDED P.C. BOARD LAYOUT FOR 1.57 THICK P.C.BOARD A THIS DRAWING IS A CONTROLLED DOCUMENT. DIMENSIONS: mm MATERIAL TOLERANCES UNLESS OTHERWISE SPECIFIED: 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH 0.2 - DWN 31DEC2002 CHK 31DEC2002 APVD 31DEC2002 R. VESTAL D. CROWE D. CROWE NAME PRODUCT SPEC 108-1329 APPLICATION SPEC - 114-16016 WEIGHT 28.74g CUSTOMER DRAWING 4805 (3/13) TE Connectivity SIZE HEADER ASSEMBLY, 23 POSITION, RIGHT ANGLE AMPSEAL CAGE CODE A1 00779 DRAWING NO 770669 SCALE 2:1 RESTRICTED TO SHEET 2 OF - 2 REV L