1-776267-5

7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION 6 5 4 3 2 20 REVISIONS ALL RIGHTS RESERVED. BY - P 35.4 4X ( 1 ( 19.3 ) ( 31.40 ) 2.17 ) ( R 5.0 ) ( 18.6 ) (7.30-7.75) ( 2.0 ) 4X ( 8.00 ) ( 0.75 ) LTR DESCRIPTION DATE DWN APVD B8 REVISED PER ECO-19-009419 19JUN2019 DS DS B9 REVISED PER ECO-20-004256 25MAR2020 JM DS B10 REVISED PER PCN E-20-016603 24NOV2020 PN DS B11 REV PER ECO-21-001365 29JAN2021 DS DS 1 SUGGESTED MOUNTING SCREW SIZE IS n 2.50-3.00mm [ n 0.099 - 0.118 INCH] SELF TAPPING THREAD FORMING SCREW, SUCH AS DELTA PT, TO BE DRIVEN AT 0.6-0.8 N-m THE CUSTOMER SHOULD TEST THE SCREW SIZE AND TYPE IN ORDER TO VERIFY THEIR SELECTION FOR THEIR APPLICATION 2 HOUSING COLORS ARE MECHANICALLY KEYED TO MATE ONLY WITH IDENTICALLY COLORED PLUG ASSEMBLIES. ( 48.80 ) D 1 D 3. HEADER MATES TO PLUG ASSEMBLY 776273 WHICH USES REELED TERMINAL 770520 OR LOOSE PIECE TERMINAL 770854 4 5 18.1 MATERIAL: GASKET - SILICONE HEADER HOUSING - GLASS FILLED PBT PINS - TIN OR GOLD PLATED BRASS DATE CODE TO BE BRANDED ON THIS SURFACE PER TE SPEC 102-60. USE 5 DIGIT CODE: FIRST 2 DIGITS = YEAR, SECOND 2 DIGITS = WEEK, LAST DIGIT = DAY. ( 32.1 ) ( 23.6 ) (3.0-4.0) C C HEADER HOUSING GASKET CONTACTS ( 2.0 ) 38.4 ( 5.8 ) ( 9.8 ) ( 13.8 ) B B 5 776267-1 A 2 THIS DRAWING IS A CONTROLLED DOCUMENT. DIMENSIONS: mm MATERIAL 4805 (3/13) - TOLERANCES UNLESS OTHERWISE SPECIFIED: 0.2 0.13 - 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH 4 - 4 DWN BLUE GOLD PLATED 1-776267-5 GRAY GOLD PLATED 1-776267-4 NATURAL GOLD PLATED 1-776267-2 BLACK GOLD PLATED 1-776267-1 BLUE TIN PLATED 776267-5 GRAY TIN PLATED 776267-4 NATURAL TIN PLATED 776267-2 BLACK TIN PLATED 776267-1 HEADER HOUSING COLOR DESCRIPTION PART NUMBER D. DRUMMOND 18AUG2010 CHK 18AUG2010 APVD 18AUG2010 D. STRAUSSER D. STRAUSSER TE Connectivity NAME PRODUCT SPEC 108-1329 APPLICATION SPEC 5 $ 114-16016 WEIGHT & 1-776267-1 SHOWN 21.10g CUSTOMER DRAWING SIZE HEADER ASSEMBLY, 14 POSITION, RIGHT ANGLE, AMPSEAL CAGE CODE A1 00779 DRAWING NO RESTRICTED TO 776267 SCALE 4:1 SHEET 1 OF - 2 B11 REV A 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 6 5 4 3 2 1 20 RELEASED FOR PUBLICATION REVISIONS ALL RIGHTS RESERVED. BY - P LTR - 35.4 1.75 # 0.1 AFTER PLATING A s 14X 4 0.5 A 4X 0.08 2X SEE SHEET 1 DWN APVD - - - 3.0 -3.3 AMPSEAL HEADER A -A- D DATE 10 1.5 2.85 DESCRIPTION D 9 2.85 HOLES 25.2 24.8 18.1 4 EDGE OF PC BOARD 4 2 6.5 GASKET 5 29 RECOMMENDED PC BOARD LAYOUT 3.20 2.95 FOR 1.57 PC BOARD MOUNTING PANEL OR MODULE 4X R 6.6 -6.8 32.5 32.0 38.4 RECOMMENDED MOUNTING HOLE LAYOUT FOR 5.0 MAX THICK PANEL C C SCALE MOUNTING SCREW (4) TORQUE TO 0.6N-m TO 0.8N-m 2:1 5.0 MAX 5.0 MAX SEALING SURFACE SEALING SURFACE 45 $ 4.7 4.7 Ra MAX 0.4 Ra MAX 0.4 2.0 1.0 2.0 SECTION SECTION A-A OPTIONAL CONSTRUCTION IF THICKNESS IS GREATER THEN 2.0 OPTIONAL CONSTRUCTION IF THICKNESS IS GREATER THEN 2.0 B A-A B SCALE ENSURE THE HEADER IS FLUSH TO THE PANEL FACE ALL AROUND BEFORE TIGHTENING TO FINAL TORQUE 2:1 A A THIS DRAWING IS A CONTROLLED DOCUMENT. DIMENSIONS: 776267-1 & 1-776267-1 KEY LOCATION SCALE 4805 (3/13) 2:1 776267-2 & 1-776267-2 KEY LOCATION SCALE 2:1 776267-4 & 1-776267-4 KEY LOCATION SCALE 2:1 mm 776267-5 & 1-776267-5 KEY LOCATION SCALE 2:1 MATERIAL - TOLERANCES UNLESS OTHERWISE SPECIFIED: 0.2 0.13 - 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - DWN 18AUG2010 CHK 18AUG2010 APVD 18AUG2010 D. DRUMMOND D. STRAUSSER D. STRAUSSER TE Connectivity NAME PRODUCT SPEC 108-1329 APPLICATION SPEC 5 $ 114-16016 WEIGHT 21.10 CUSTOMER DRAWING SIZE HEADER ASSEMBLY, 14 POSITION, RIGHT ANGLE, AMPSEAL CAGE CODE A1 00779 DRAWING NO RESTRICTED TO 776267 SCALE 4:1 SHEET 2 OF - 2 B11 REV