100E0111-1.00-9

100E0111 Issue 4 26th May 2009 Specification Control Drawing Page 1 of 2 Page 2 is for internal use only WIRE, HALOGEN FREE, THIN WALL INSULATED, 300 VOLT AC, TEMPERATURE CLASSIFICATION 105°C The complete requirements for procuring the wire described herein shall consist of this document. Conductor Tin Plated Copper Insulation Halogen Free Polymer Conductor Nominal Part Cross Conductor Description Sectional Stranding Finished Wire Diameter Maximum Diameter (mm) Resistance (mm) Maximum Weight @ (kg/km) Area No./Diam. (mm²) (mm) Min. Max. (ohms/km) 20°C Min. Max. 100E0111-0.50-* 100E0111-0.75-* 0.50 19/0.18 0.82 0.90 40.1 1.37 1.45 6.60 0.75 19/0.23 1.04 1.15 26.7 1.59 1.65 8.90 100E0111-1.00-* 1.00 19/0.25 1.17 1.26 20.0 1.69 1.80 10.7 100E0111-1.50-* 1.50 37/0.23 1.46 1.58 13.7 2.03 2.13 16.0 100E0111-2.50-* 2.50 37/0.29 1.85 2.01 8.21 2.50 2.63 25.7 COLOUR CODE: The '*' in the part number shall be replaced by a standard colour code designator in accordance with Mil Std 681. e.g. 100E0111-1.50-0 Black outer jacket PERFORMANCE REQUIREMENTS: To be tested to and meet the requirements of the issue in effect of EN 50306-2 MARKING REQUIREMENT: Every 250 ± 25 mm The mark shall be: TE Raychem EN 50306-2 300V 1 X § M Where "§" = The nominal conductor cross-sectional area APPROVAL: Electronic sign off - no signatures will appear. ''Raychem', 'TE' and 'Tyco Electronics' are registered trademarks of Tyco Electronics Corporation. ©2009 Tyco Electronics Corporation. All International Rights Reserved