100F1131-20

100F1131 Issue 8 15th July 2009 Specification Control Drawing Page 1 of 2 Page 2 is for internal use only THREE CONDUCTOR CABLE, HALOGEN FREE, SHIELDED AND JACKETED 250 VOLT AC IN ACCORDANCE WITH NF F 63-808, TEMPERATURE CLASSIFICATION 105°C (Suitable for use at an operating voltage of 750/1300 VOLTS AC) The complete requirements for procuring the wire described herein shall consist of this document and NF F 63-808 Mai 1992 Shield Tin Coated Copper Component wire 100F0111 Jacket ® Zerohal - black C8 C9 Part C7 NFF 63808 Cross Shield Description Designation Sectional Area (mm²) C10 C11 Optical Jacket Size Shield (mm) Coverage C36 C12 C13 C29 C14 Overall Diameter (mm) Weight Thickness Lower (kg/km) (mm) Spec Min. Min. Nom. Limit Upper Target Spec Limit Nom. Max. 100F1131-20 E 250-S-BLG-3 x 0.60-NFF 63808 0.60 0.13 93% 0.25 0.35 4.31 4.52 4.72 42.0 45.3 100F1131-18 E 250-S-BLG-3 x 0.93-NFF 63808 0.93 0.13 94% 0.25 0.35 4.79 5.03 5.23 56.2 59.8 COLOUR CODE: Insulation colour determined by conductor cross sectional area as defined by 100F0111 SCD. PERFORMANCE REQUIREMENTS: The complete requirements for procuring the wire described herein shall consist of this document and NF F 63-808 Mai 1992 Optical shield coverage tested in accordance with WCD 51 clause 5.4. MARKING: Components: Jacket: Where: and Spaced at 50mm maximum, longitudinally, coloured black, First core only: E X - NF F 63-808 - TE Raychem -YY Second core: marked 2 Third core: marked 3 Spaced at every 50mm maximum, longitudinally, coloured white, E - BLG - 3 × X - NF F 63-808 - TE Raychem - YY - B "X" = conductor cross sectional area (see above) "YY" = the Year Code Designator in accordance with table below "B" = Manufacturing Batch Number. "Zerohal" is a registered trademark of Tyco Electronics Corporation. APPROVAL: Electronic approval - no signatures will appear. ©2009 Tyco Electronics Corporation. All International Rights Reserved.