100G0111-2.50-45

100G0111 Issue 9 14th November 2012 Customer Drawing Page 1 of 2 Page 2 is for internal use only WIRE, HALOGEN FREE, THIN WALL, 750/1300 VOLT AC, 125°C The complete requirements for procuring the wire described herein shall consist of this document. Conductor Tin Plated Copper # # # # # # # Insulation Halogen Free Polymer C6 C7 Part Description Nominal Nominal Cross Conductor Equivalent Sectional Stranding AWG Area No./Diam. Size (mm²) (mm) 100G0111-0.15-* 100G0111-0.25-* 100G0111-0.40-* 100G0111-0.50-* 100G0111-0.60-* 100G0111-0.75-* 100G0111-1.00-* 100G0111-1.20-* 100G0111-1.50-* 100G0111-2.00-* 100G0111-2.50-* 100G0111-3.00-* 100G0111-4.00-* 0.15 0.25 0.40 0.50 0.60 0.75 1.00 1.20 1.50 2.00 2.50 3.00 4.00 19/0.10 19/0.13 19/0.16 19/0.18 19/0.20 19/0.23 19/0.25 19/0.29 37/0.23 37/0.25 37/0.29 37/0.32 56/0.30 C8 26 24 22 20 18 16 15 14 13 12 - C9 C11 C16 C17 C18 Conductor Diameter (mm) Min. 0.45 0.55 0.73 0.82 0.95 1.04 1.17 1.32 1.46 1.68 1.85 2.12 2.41 FINISHED WIRE Minimum Maximum Diameter Insulation Resistance (mm) Thickness @ 20°C Lower Upper (mm) (ohms/km) Spec Target Spec Max. Limit Limit 0.50 0.20 132.9 0.98 1.03 1.08 0.63 0.20 84.32 1.09 1.14 1.19 0.79 0.20 50.50 1.28 1.33 1.38 0.90 0.20 40.10 1.37 1.40 1.45 1.01 0.20 31.10 1.47 1.52 1.57 1.15 0.20 26.70 1.59 1.60 1.65 1.26 0.20 20.00 1.69 1.75 1.80 1.42 0.20 15.80 1.88 1.93 1.98 1.58 0.20 13.70 2.03 2.08 2.13 1.82 0.20 10.50 2.31 2.36 2.41 2.01 0.25 8.21 2.50 2.55 2.63 2.24 0.25 6.58 2.70 2.78 2.86 2.57 0.25 4.89 3.01 3.09 3.17 COLOUR CODE: The '*' in the part number shall be replaced by a standard colour code designator in accordance with Mil Std 681. eg: 100G0111-1.00-2 Red insulation PERFORMANCE REQUIREMENTS: All sizes shall be tested and meet the requirements of the issue in effect of WSD 912 Sizes Indicated with # shall also meet the requirements of the issue in effect of ENG-SYS-825-904 C20 Maximum Weight (kg/km) 2.59 3.59 5.18 6.60 7.40 8.90 10.70 13.60 16.00 20.30 25.70 31.00 43.60 This product will be available in the full colour range and may be marked or unmarked in accordance with the order. APPROVAL: Tyco Electronics UK Ltd Faraday Road Dorcan SWINDON SN3 5HH Tel: +44 (0)1793 528171 Fax: +44 (0)1793 572516 Electronic sign off - no signatures will appear. TE TEConnectivity Connectivityisisaatrading tradingname nameofofTyco Tyco Electronics ElectronicsUK UKLtd, Ltd, which whichisisregistered registeredin in England Englandand andWales, Wales,number number550926. 550926. Registered Registeredoffice: office:Faraday FaradayRoad, Road, Dorcan, Dorcan, Swindon,SN3 SN35HH 5HH Swindon, Website: www.te.com Website: This drawing and the information set forth hereon are the property of Tyco Electronics UK Ltd, and are to be held in trust and confidence. Publication, duplication, disclosure or use for any purpose not expressly authorised in writing by Tyco Electronics UK Ltd is prohibited. This specification sheet takes precedence over documents referenced herein. As Tyco Electronics UK Ltd. reserve the right to make changes in construction without notice please contact Tyco Electronics UK Ltd to ensure that this document is the latest issue. ©2012 Tyco Electronics UK Ltd, a TE Connectivity Ltd. company. All Rights Reserved.