AMPMODU Interconnection System
AMPMODU .025 [0.64] Square Interconnection System
AMPMODU Headers and Receptacles, .100 [2.54] Centerline
87605-1
Bulkhead
Header
1-534237-8
SR Top Entry
1-535541-0
SR Top Entry
87220-8
SR VT
1-103239-0
SR VT BA
1-103240-0
DR VT BA
104351-8
DR VT-RET BA
87227-5
DR VT
1-534206-0
DR Top Entry
146490-5
DR Stacking
Header
102699-4
DR AP
103166-3
DR RA
104344-8
SR VT-RET BA
103336-5
SR AP
103577-3
87230-6
DR RA
87232-9
SR RA
103168-3
DR VT
103542-9
DR AP
103164-3
3/4 DR RA
535512-1
DR HORZ
104354-5
Legend:
DR RA-RET BA
SR
Single Row
535676-9
DR
Double Row
SR HORZ
VT
Vertical
RA
Right Angle
RET
Retention Feature
AP
ACTION PIN
BE
Bottom Entry
3/4
3-Sided-Shrouded Header
BA
Breakaway
TR
Triple Row
SMT Surface Mount
HORZ Horizontal
DE
Dual Entry
534267-1
DR Outrigger DE
104347-8
SR RA-RET BA
1-103149-0
DR RA BA
103414-8
SR VT
102203-7
SR RA
1-534998-3
DR Top Entry
103148-6
SR RA
87879-7
SR Bottom Entry
For drawings, technical data or samples, contact your Tyco Electronics sales engineer or call the Tyco Electronics Product Information Center: 1-800-522-6752
5
84
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
AMPMODU .025 [0.64] Square Interconnection System
AMPMODU Headers and Receptacles, .100 [2.54] Centerline
146134-9
DR VT SMT
146132-4
SR VT SMT
1-146474-0
SR Stacking Header
147720-9
SR Outrigger DE
535542-3
DR DE
147722-4
SR HOR2 SMT
103817-2
TR VT
1-147070-1
.045 Sq. Continuous Post
147738-5
SR VT SMT DE
1-147333-1
.025 Sq. Continuous Post
Legend:
SR
Single Row
DR
Double Row
VT
Vertical
RA
Right Angle
RET
Retention Feature
AP
ACTION PIN
BE
Bottom Entry
3/4
3-Sided-Shrouded Header
BA
Breakaway
TR
Triple Row
SMT Surface Mount
HORZ Horizontal
DE
Dual Entry
1-147105-0
DR VT SMT DE
147721-4
SR HORZ SMT
For drawings, technical data or samples, contact your Tyco Electronics sales engineer or call the Tyco Electronics Product Information Center: 1-800-522-6752
5
85
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
AMPMODU .025 [0.64] Square Interconnection System
The AMPMODU interconnection system provides
interconnections with a
unique modular concept,
utilizing precision formed
receptacle contacts and
mating posts.
Mating of the post and
receptacle contacts of
this system is very tolerant.
This is made possible by
a post with a burr-free
lead-in and a receptacle
contact featuring double
cantilever beams and antioverstress stops.
AMPMODU receptacle contacts and posts categorically fall into three general classifications of products,
which include: board mounted posts and receptacle
assemblies, post headers
and wire-applied contact
housings for crimp snap-in
pin and receptacle contacts.
Board mounted receptacle
assemblies are available in
various geometries, offering
packaging interconnections
that include perpendicular,
parallel and stacking capabilities.
Crimp snap-in pins for
26-22 AWG [0.12-0.4 mm2]
wire and crimp snap-in
receptacles for 32-20 AWG
[0.03-0.6 mm2] wire provide
excellent discrete wire terminations. Housings for
these contacts provide ease
of handling terminations in
high density applications.
Machine applied terminations, through matched
application equipment, are
geared for virtually any production volume requirement,
for the lowest possible
applied cost.
AMPMODU mating posts
are supplied typically as
headers. They are available
in various populations to
meet the interconnection
and packaging requirements of most systems.
However, in instances
where packaging configurations do not lend themselves
to the economies of headers, Tyco Electronics can
provide application equipment for the discrete location of individual posts.
Looking at the electronic
industry's standard "levels of
packaging," the AMPMODU
.025 [0.64] square interconnection system is primarily
used in levels three and four.
In level three it is used as
a connection between two
or more printed circuits.
A mother/daughter board
connection is typical. In
level four it is used as a
connection between two
subassemblies, such as a
power supply and an associated subassembly.
It is also important to note
this product can serve as an
interconnection in more than
one level, depending on the
application.
The .025 [0.64] square interconnection system offers
the most complete line of
post/receptacle packaging
products available today.
This system, rated at 3
amperes per contact, has
been used by almost every
industry and marketplace
over the last decade and is
one of the oldest, most versatile and reliable interconnection systems employing
.025 [0.64] square packaging technology.
Terms Explained
Receptacle Contacts
The AMPMODU receptacle
cross-section is primarily
rectangular, with rounded
corners. Two integral cantilever beams contact the
mating square or round
male posts. Deflection of
these spring members is
limited by anti-overstress
stops, and excessive
permanent deformation is
prevented. This feature
allows a wide range for
tolerance of misalignment
of mating contacts.
preventing damage during
handling and assembly and
makes the system
compatible with automatic
application techniques.
Note: Application of a contact lubricant is part
of the manufacturing process of all AMPMODU
tin-plated crimp products. However, it is not
part of the manufacturing process of products
that customers will solder, then clean. For
these products, Tyco Electronics recommends
that customers use contact lubricant. See the
Tyco Electronics web page for further
information.
Insulation
Support
Barrel
Rugged—selfsupporting
one-piece
contact body
Wire
Crimp
Barrel
Wire entry for post to
receptacle misalignment
Reliability—dual
cantilever spring
contact design
and built-in
anti-overstress
Offers standard, intermediate and
high pressure contact forces
The configuration of the
receptacle completely
encloses the spring members
Cantilever
Beams
Wide
Misalignment
Tolerance
Anti-overstress
5
Receptacle-Closed
Entry Housing Design
Contact edges
enclosed in
plastic
The closed entry housing
style better eliminates the
chance of a mating post
stubbing on the edges of
the receptacle contact.
Closed Entry
Metallic
post stop
Contact edges
enclosed in
plastic
Access Way
86
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Wire-to-Board, .100 [2.54] Centerline Products
Wire Sizes
Contact Platings
Mating Post Lengths
Application Tooling
Wire Size
AWG
[mm2]
20
0.5-0.6
22-30
0.3-0.05
32
0.03
Platings
.000015 [0.00038]
Gold
.000030 [0.00076]
Gold
.000050 [0.00127]
Gold
Tin
Product Family
Locking Clip, Mod. IV, IV.v, V, MT, Short Point
Locking Clip, Mod. IV, IV.v, V, MTE, MT, Short Point
Mod. IV, IV.v, V, Short Point
Product Family
Mod. IV, IV.v, V, MTE, MT, Short Point
Locking Clip, Mod. IV, IV.v, V, MTE, MT, Short Point
Locking Clip, Mod. IV, IV.v, V, MT
Locking Clip, Mod. IV, IV.v, V, MTE, MT, Short Point
Post Lengths
.210-.283 [5.33-7.19]
.205-.283 [5.21-7.19]
.185-.283 [4.70-7.19]
.256-.323 [6.50-8.20]
.251-.323 [6.38-8.20]
.231-.323 [5.87-8.20]
.146-.283 [3.71-7.19]
.273-.350 [6.93-8.89]
.222-.273 [5.64-6.93]
.200-.273 [5.08-6.93]
.200-.250 [5.08-6.35]
.169-.259 [4.29-6.58]
.273-.350 [6.93-8.89]
.200-.277 [5.08-7.04]
Application Tooling
Description
Manual Hand Tools (Wire Crimp)
Manual Hand Tools (IDC)
AMP-O-MATIC Stripper/Crimper
Machines with Applicator
CHAMPOMATOR
Model 2.5 Machine
CHAMPOMATOR
Model 3A Machine
AMP-O-LECTRIC
Machines with Applicator
Pneumatic Hand Tools
IDC Electric Power Unit
Tube-Fed Ribbon
Cable Machine
AMPOMATOR CLS Machines
Discrete Wire Machine
Manual Arbor Tool
Pneumatic Arbor Tool
Product Family
Mod. IV( .600 [15.24] Profile Height)
Mod. IV.v (.600 [15.24] Profile Height)
Mod. V( .600 [15.24] Profile Height)
Mod. IV( .645 [16.38] Profile Height)
Mod. IV.v (.645 [16.38] Profile Height)
Mod. V( .645 [16.38] Profile Height)
Tandem Spring (.600 [15.24] Profile Height
Tandem Spring (.645 [16.38] Profile Height
MT Assembly with Standard Pressure Contacts
MT Assembly with High Pressure Contacts
MTE Assembly
Short Point Connector Assembly
Locking Clip (Connector Assembly)
Locking Clip (Single Contact)
Mod. IV,
IV.v, V
MT
•
Product Family
Locking
Short
MTE
Clip
Point
•
•
•
•
•
•
Level V
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
5
•
•
•
87
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Board-to-Board Solutions Guide, .100 [2.54] Centerline Products
Problem or Concern
Tyco Electronics Solution
Single-Row
Vertical Headers
and Receptacles
(Page Ref.)
Single-Row
Right-Angle Headers,
Horizontal Receptacles
(Page Ref.)
Double-Row
Vertical Headers
and Receptacles
(Page Ref.)
Double-Row
Right-Angle Headers,
Horizontal Receptacles
(Page Ref.)
111,112,119
—
113,215
121,216
114,216
122,217
129,130
131
133-138
139-145
163
—
—
—
164
216,165,166
—
—
119*
—
120*
147*, 154*
121*
155*
—
213*
211*, 212*
—
189
124
206-209
—
190
—
—
—
—
215,216
213*
217
212*
195
—
—
—
196,197*
—
—
—
194
—
—
—
—
—
—
—
198
204-205
—
—
199-201
206-209
—
—
198
—
199
—
93,94,103,104,111,112
119*
—
95,96,105,106,113
120*
124*
97,98,107,108,114
*122*
—
186*
189
193,196,197*,199*,200,201
208-209
187
190
Headers Float Off Board
Soldering Operation
HEADERS Retention Feature:
Unshrouded
109, 110, 118, 119
Shrouded
—
Header Contacts Damaged
During Manufacturing
Operation or In-Field Use
Shrouded HEADERS:
Standard Profile
Press-Fit ACTION PIN POST
HEADERS After Reflow:
Unshrouded
Shroudeddd
Machine Applied
Posts
Board/Backplane Requires
High Temperature SurfaceMount Compatibility
Application Requires Board
Guidance, Polarization and/or
Blind-Mate Capability
Reduction in Parallel
Board-to-Board Stack Height
Necessary (Refer to Parallel
Stack Guide on Page 64.)
Soldering Problems with
Through-Hole Bottom Entry
Receptacles (Must Mask
Post Holes in Board During
Soldering Operation)
Application Requires
Connectors to be End-to-End
Stackable on .100 [2.54] Grid
180
Surface-Mount Compatible Through-Hole:
HEADERS:
Unshrouded
118*
Shrouded
—
(Low Profile)
RECEPTACLES
—
Surface-Mount:
HEADERS
123*
RECEPTACLES
204-205
Two-Piece Family: w/Guide Posts:
HEADERS
RECEPTACLES
Mod IV Low Profile
RECEPTACLES:
T O PE N T R Y :
Through-Hole
Surface-Mount
BOTTOMENTRY:
Through-Hole
Surface-Mount
DUAL ENTRY
Through-Hole
Surface Mount
RECEPTACLES:
Bottom Entry
Outrigger
(Separate Holes for
Receptacle Leads
and Mating Leads)
End-to-End Stackable:
HEADERS (Unshrouded):
Through-Hole
92,101,102,109,110
Through-Hole*
118*
Surface-Mount
123*
RECEPTACLES:
Through-Hole
192,194,195,198
Surface Mount
205
*High temperature compatible
version, refer to page ref. listed.
Wire-to-Board Solutions Guide, .100 [2.54] Centerline Products
Customer Requirement
Application Requires
Guidance, Polarization
Wire-to-Wire Application
Wire-to-Wire Application (Latched)
Wire-to-Wire Application (Through Panel)
High Vibration and Shock Applications
Printed Circuit Board Polarization
Board Requires Surface Mount Capability
Tyco Electronics Solution
Mod IV Polarized Housing
MTE Latched Receptacle and Header
MT with Polarizing Covers
Short Point Polarized Housing
Mod IV Receptacle Contacts and Pins
MTELatched Receptacle and Shrouded Pin Assembly
MTEPanel Mount
Locking Clip Contacts and Housings
MTEHeader with PC Board Orientation Peg
MTE Surface Mount Headers
MTE High Temperature Compatible Headers
Need to mate to
AMP-LATCH Eject Headers
Mod IV Ejection Housing
237
Need to Minimize Strain to Cable
MT with Eject Covers
Mod IV Housing with Strain Relief
275-277
235
Locking Clip Contacts
224
Application Requires
Self-Retaining Contacts
Header Secured to Board
During/Prior to Soldering
5
Catalog Page(s)
237
247,248,261-268
275-277
261
228-230
247,248,253,254
259
224-226
265, 266
264,270
266-268
MTEHeaders with Post Retention or Holddowns
261-268
Mate to Unshrouded Header
with Retention Requirements
Mod IV plain Housing with Mod V Contacts
MTEwith High Pressure Contacts
230
251, 252
Multiple Cables to be
Common to One Header
Right-Angle Cable Dress
Application Requires Crimp
Contacts and MTE Housings
Housings and End-to-End and
Side-to-Side Stackable
Connector Must Mate to
Post Lengths of .169 [4.29] Min.
MTECoupling Shroud, Double- or Single-Row
257, 258
MT with Hermaphroditic Covers
275, 276, 246
Short Point Contacts
239
Short Point Double-Row Housing,
MTEPlain Housing
240, 245, 246
Short Point Contacts
239
88
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Mating Post Selection Guide
The following selection
guide is provided to help in
choosing a mating product
after a receptacle, header
or post has been selected.
In some instances references are given on the catalog page to specific mating connectors. In other
instances the reader is
referred here to the selection guide for mating product recommendations.
If your application requirement
is not answered here,
consult Tyco Electronics for
further recommendations.
Recommended
Effective
Mating Posts Lengths
Minimum
Maximum
Receptacle Type
AMPMODU Mod II Horizontal Board Mount
Receptacle, Single and Double Row, Short
Point-of-Contact—pages 186-187,189-190
AMPMODU Mod II Vertical Board Mount
Receptacle, Single Row, Standard Profile,
Top Entry—page 192
AMPMODU Mod II Vertical
Board Mount Receptacle, Standard
Profile, Double Row, Top Entry,
100 x .100 mt.—page 193
AMPMODU Mod IV Vertical
Board Mount Receptacle, Low
Profile, Single Row, Top Entry, Single Tine—
page 195
AMPMODU Mod IV Vertical
Board Mount Receptacle, Low
Profile, Single Row, Bottom Entry—
page 194
AMPMODU Mod IV Vertical
Board Mount Receptacle, Low
Profile, Double Row, Top Entry—
pages 196,197
AMPMODU Surface-Mount Receptacle, Top Entry
Vertical Board Mount,
Single Row, Dual Entry—page 204-207 Bottom Entry
AMPMODU Mod IV Vertical
Top Entry
Board Mount Receptacle, Low
Profile, Double Row, Dual Entry—
Bottom Entry
page 199
AMPMODU Surface-Mount Receptacle, Top Entry
Vertical Board Mount, Double Row,
Dual Entry—page 206-209
Bottom Entry
AMPMODU .600 [15.24] Mod IV
Housing with Standard Pressure Contacts—
pages 228-237
AMPMODU .600 [15.24] Mod IV
Housing with Intermediate Pressure Contacts—
pages 228-237
AMPMODU .600 [15.24] Mod IV
Housing with High Pressure Contacts—
pages 228-237
AMPMODU Mod IV Vertical
Top Entry
Board Mount Receptacle, Low
Profile, Single Row, Dual Entry—
Bottom Entry
page 198
.230 [5.84]
.280 [7.11]
.183 [4.65]
.330 [8.38]
.183 [4.65]
.330 [8.38]
.183 [4.65]
.280 [7.11]
.255 [6.48]
*
.183 [4.65]
.255 [6.48]
.183 [4.65]
*
.204 [5.18]
*
.183 [4.65]
*
.204 [5.18]
*
.183 [4.65]
*
.204 [5.18]
*
.210 [5.33]
.283 [7.19]
.205 [5.21]
.283 [7.19]
.185 [4.70]
.283 [7.19]
.183 [4.65]
*
.204 [5.18]
*
Posts Without Shoulders
Posts With Shoulders
For drawn wire products
(ie, AMPMODU Breakaway
and Low Profile Headers)
and for products having the
shoulder of the post below
the housing or pc borad
surface (ie, AMPMODU
MTE and Single Row
Shrouded Headers) the
effective mating length
starts at the housing or
pc board surface.
For product having the
shoulder of the post
extending above the housing or pc board surface)
ie, Standard AMPMODU
Shrouded and Unshrouded
Headers) the effective mating length starts at the top
of the shoulder.
Effective
Mating
Length
Effective
Mating
Length
Recommended
Effective
Mating Posts Lengths
Minimum
Maximum
Receptacle Type
Short Point Housing with Contacts—
pages 239-241
AMPMODU MTE Unloaded Housing with
Short Point Contacts—pages 239, 246-249
AMPMODU MTE
IDC Assemblies
AMPMODU MT IDC Assembly with
Standard Pressure Contacts—page 275
AMPMODU MT IDC Assembly with
High Pressure Contacts—page 276
Locking Clip Housing with
Contacts—pages 224-226
Locking Clip Contact without
Housing—page 224
.169 [4.29]
.259 [6.58]
.169 [4.29]
.259 [6.58]
.200 [5.08]
.250 [6.35]
.222 [5.64]
.273 [6.93]
.200 [5.08]
.273 [6.93]
.273 [6.93]
.350 [8.89]
.200 [5.08]
.277 [7.04]
Flexible Flat Conductor Cable
Receptacle with Round Wire
Crimp High Pressure Contact—
Catalog 82007
Single Row
.267 [6.78]
.323 [8.20]
Double Row
.282 [7.16]
.323 [8.20]
Flexible Flat Conductor Cable
Receptacle with Multiple Wire
Crimp High Pressure Contact—
Catalog 82007
Single Row
.210 [5.33]
.323 [8.20]
Double Row
.225 [5.72]
.323 [8.20]
Flexible Flat Conductor Cable
Receptacle with Round Wire
Crimp Standard Pressure
Contact—Catalog 82007
Single Row
.267 [6.78]
.323 [8.20]
Double Row
.282 [7.16]
.323 [8.20]
Flexible Flat Conductor Cable
Receptacle with Multiple Crimp
Standard Pressure Contact—
Catalog 82007
Single Row
.220 [5.59]
.323 [8.20]
Double Row
.235 [5.97]
.323 [8.20]
*Maximum post length is determined by customer’s application; (i.e., available
space beyond rear of horizontal receptacle assembly, or above bottom entry
vertical receptacle assembly or below vertical receptacle assemblies used in
pass through applications).
5
89
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Parallel Stacking Guide for Board-to-Board Applications
See
Figure
Below
1
Dimension
Between
PC Boards
Product Family
Headers
(See Note 1.)
Single-Row
(Page Ref.)
Double-Row
(Page Ref.)
Product Family
Receptacles
Single-Row
(Page Ref.)
Double-Row
(Page Ref.)
.020 [0.50]
Bandolier Posts
180
NA
Mini Spring Sockets
Catalog
82172
Catalog
82172
.060 [1.52]
Bandolier Posts
180
NA
Bottom Entry, Mod IV
194
—
Breakaway**
(Unshrouded)
Surface Mount**
Breakaway (Unshrouded)
101,102,119**
105,106,120**
Dual Entry, Mod IV
198
192
NA
124
Surface Mount**, Mod IV,
Entry
NA
—
.265 [6.73]
Bandolier Posts
180
154**
Top Entry, Mod IV
195,198
.355 [9.02]
Breakaway**
(Unshrouded)
101,102,119**
105,106,120**
Top Entry, Mod IV
195,198
196,197 (197**),
199,200-201
196,197 (197**)
199,200-201
.385 [9.78]
Low Profile Shrouded
NA
152,154**
Top Entry, Mod IV
NA
196,197 (197**)
NA
208-209
.090 [2.29]
.153 [3.89]
2
3
.418 [1.06]
2*
.430 [10.92]
Surface Mount**
Breakaway (Unshrouded)
Breakaway**
(Unshrouded)
4*
.440 [11.18]
Shrouded, Mod II
124
101,102,119**
105,106,120**
Top Entry, Mod II
192
193
129,130
133,135
Top Entry, Mod II or Mod IV
192,195
193,196,197
Inner Board Receptacle
(See Note 2.)
Outer Board Receptacle
(See Note 2.)
Two-Piece Receptacle**
Connector System
Inner Board Receptacle
(See Note 2.)
Outer Board Receptacle
(See Note 2.)
Stacking Receptacle
(Limited Sizes)
Stacking Receptacle
(Limited Sizes)
Mod II/IV Receptacles,
Top/Bottom Entry
NA
174
NA
175
NA
213**
NA
174
NA
176
NA
NA
NA
NA
Various
Various
NA
173 (Hood)
NA
177
NA
215,216
NA
173 (Hood)
NA
178
NA
160
1.200 [30.48]
Stacking Shroud
(See Note 2.)
Stacking Shroud
(See Note 2.)
Two-Piece Header
Connector System
Stacking Shroud
(See Note 2.)
Stacking Shroud
(See Note 2.)
Shrouded Stacking
(Limited Sizes)
Shrouded Stacking
(Limited Sizes)
NA
161
Various
Stacking Unshrouded
126
127
.528 [13.41]
.547 [13.89]
4
NA
Surface Mount**, Mod IV,
Top Entry
.550 [13.97]
.748 [19.00]
.768 [19.51]
.785 [19.94]
**High temperature version available, see page ref. listed.
Notes: 1. Headers listed are standard through hole versions. Many headers are available with retention feature and ACTIONPINposts. See product
Notes: 1. specification pages in individual sections for option availability.
Notes: 2. These headers and receptacles are Related Board-to-Board products. They are not part of the AMPMODU .025 [0.64] Square Product Family.
Board-to-Board
Stacking Heights
(By Receptacle/Header
Combination)
Receptacle Assembly
Receptacle Assembly
Receptacle Assembly
.265
[6.73]
.355
[9.02]
.090
[2.29]
5
Header
Header
Figure 1
Double-Row, Mod IV,
Bottom Entry, Breakaway Header
.265
[6.73]
.265*
[6.73]
.090
[2.29]
Figure 2
Double-Row, Mod IV,
Top Entry, Breakaway Header
*Mod II Receptacle Height
is .340 [8.64] for a total
stack height of .430 [10.92]
.153
[3.89]
.418
[10.62]
.550*
[13.97]
Header
Figure 3
Double-Row, Mod IV,
Surface-Mount, Top Entry,
Receptacle and Surface-Mount
Breakaway Header
Figure 4
Double-Row, Two-Piece
Receptacle and Two-Piece
Shrouded Header
*Mod II Shrouded Header Height
is .440 [11.18] for a total
stack height of .440 [11.18]
90
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Standard Headers—Unshrouded
Product Facts
■
Variety of popular sizes
available
■
Substantial time/labor
savings—install all posts
at one time
■
Vertical and right-angle
versions available in
single- and double-row
configurations
■
Triple-row version available
in vertical configuration
with .230 [5.84] mating
length
■
Copper alloy posts
■
Choice of select gold or
tin-lead plated posts
■
Mating length for single and
double row is .318 [8.08]
(.278 [7.06] effective
mating length-see page 89)
■
Flame retardant, black
thermoplastic housings;
94V-0 rated
■
Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
■
Certified by Canadian
Standards
Association,
File No. LR 7189
Performance
Characteristics
Electrical:
Insulation Resistance—5,000
megohms minimum initial
Dielectric Withstanding Voltage—
750 V rms at sea level
Environmental:
Operating Temperature—
-65°C to +105°C (black thermoplastic
housings)
Current—3 amperes maximum
per contact (dependent upon mating
connector)
5
91
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Standard Headers—Unshrouded, Single Row, .100 [2.54] Centerline
.025 [0.64] Square
Straight Post
.200
Ref.
[5.08]
(Contact Area)
A
.100
Typ.
[2.54]
.318
[8.08]
.090
[2.29]
.046/.038
[1.17/0.97]
.042
[1.07]
Typ.
Material and Finish:
Related Product Data:
Mateable Connectors—Refer
to the Mating Post Selection Guide
(page 89)
Technical Documents (page 294):
See mating connector for applicable
product and application specifications.
5
.050
Max. Typ.
[1.27]
B
B
Housing—Black thermoplastic,
94V-0 rated
Posts—Copper alloy, plated as follows:
Plating A—Selectively plated .000030
[0.00076] gold on contact area, with
gold flash over .000050 [0.00127] nickel
on entire post
Plating B—Selectively plated .000015
[0.00038] gold on contact area, with
gold flash over .000050 [0.00127] nickel
on entire post
Tin-Lead/Nickel—Plating option
available; minimum order quantities may
apply. Consult Tyco Electronics.
.125
[3.18]
.100*
[2.54]
.035±.003
Dia.Typ.
[0.89±0.08]
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
No. of
Pos.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
Dimensions
A
B
.084 [2.13]
—
.184 [4.67]
.100 [2.54]
.284 [7.21]
.200 [5.08]
.384 [9.75]
.300 [7.62]
.484 [12.29]
.400 [10.16]
.584 [14.83]
.500 [12.70]
.684 [17.37]
.600 [15.24]
.784 [19.91]
.700 [17.78]
.884 [22.45]
.800 [20.32]
.984 [24.99]
.900 [22.86]
1.084 [27.53]
1.000 [25.40]
1.184 [30.07]
1.100 [27.94]
1.284 [32.61]
1.200 [30.48]
1.384 [35.15]
1.300 [33.02]
1.484 [37.69]
1.400 [35.56]
1.584 [40.23]
1.500 [38.10]
1.684 [42.77]
1.600 [40.64]
1.784 [45.31]
1.700 [43.18]
1.884 [47.85]
1.800 [45.72]
1.984 [50.39]
1.900 [48.26]
2.084 [52.93]
2.000 [50.80]
2.184 [55.47]
2.100 [53.34]
2.284 [58.01]
2.200 [55.88]
2.384 [60.55]
2.300 [58.42]
2.484 [63.09]
2.400 [60.96]
2.584 [65.63]
2.500 [63.50]
2.684 [68.17]
2.600 [66.04]
2.784 [70.71]
2.700 [68.58]
2.884 [73.25]
2.800 [71.12]
2.984 [75.79]
2.900 [73.66]
3.084 [78.33]
3.000 [76.20]
3.184 [80.87]
3.100 [78.74]
3.284 [83.41]
3.200 [81.28]
3.384 [85.95]
3.300 [83.82]
3.484 [88.49]
3.400 [86.36]
3.584 [91.03]
3.500 [88.90]
3.684 [93.57]
3.600 [91.44]
3.784 [96.11]
3.700 [93.98]
3.884 [98.65]
3.800 [96.52]
3.984 [101.19]
3.900 [99.06]
Post Plating/Part Nos.
Plating A
Plating B
87220-1
87224-1
87220-2
87224-2
87220-3
87224-3
87220-4
87224-4
87220-5
87224-5
87220-6
87224-6
87220-7
87224-7
87220-8
87224-8
87220-9
87224-9
1-87220-0
1-87224-0
1-87220-1
1-87224-1
1-87220-2
1-87224-2
1-87220-3
1-87224-3
1-87220-4
1-87224-4
1-87220-5
1-87224-5
1-87220-6
1-87224-6
1-87220-7
1-87224-7
1-87220-8
1-87224-8
1-87220-9
1-87224-9
2-87220-0
2-87224-0
2-87220-1
2-87224-1
2-87220-2
2-87224-2
2-87220-3
2-87224-3
2-87220-4
2-87224-4
2-87220-5
2-87224-5
2-87220-6
2-87224-6
2-87220-7
2-87224-7
2-87220-8
2-87224-8
2-87220-9
2-87224-9
3-87220-0
3-87224-0
3-87220-1
3-87224-1
3-87220-2
3-87224-2
3-87220-3
3-87224-3
3-87220-4
3-87224-4
3-87220-5
3-87224-5
3-87220-6
3-87224-6
3-87220-7
3-87224-7
3-87220-8
3-87224-8
3-87220-9
3-87224-9
4-87220-0
4-87224-0
92
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Standard Headers––Unshrouded, Single Row, .100 [2.54]
Centerline (Continued)
.139
[3.53]
Ref.
.025 [0.64] Square
Right-Angle Post
.025
[0.64]
Typ.
Material and Finish:
A
Housing—Black thermoplastic,
94V-0 rated
Posts—Copper alloy, plated as follows:
Plating A—Selectively plated .000030
[0.00076] gold on contact area, with
gold flash over .000050 [0.00127] nickel
on entire post
Plating B—Selectively plated .000015
[0.00038] gold on contact area, with
gold flash over .000050 [0.00127] nickel
on entire post
Tin-Lead/Nickel—Plating option
available; minimum order quantities may
apply. Consult Tyco Electronics.
.042
[1.07]
Typ.
.069
[1.75]
Typ.
B
.200 [5.08]
Contact Area
.040
[1.02]
Ref.
.069
[1.75]
.025
[0.64]
.138
[3.51]
Ref.
.100
[2.54]
.110
[2.79]
Ref.
.157
[3.99]
.318
[8.08]
Ref.
.025±.001 Typ.
[0.63±0.03]
.025±.002 Typ.
[0.63±0.05]
Related Product Data:
Mateable Connectors—Refer
to the Mating Post Selection Guide
(page 89)
.100*
[2.54]
Typ.
B
.035±.003
Dia. Typ.
[0.89±0.08]
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
Technical Documents (page 294):
See mating connector for applicable
product and application specifications.
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
No. of
Pos.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Dimensions
A
B
.084 [2.13]
—
.184 [4.67]
.100 [2.54]
.284 [7.21]
.200 [5.08]
.384 [9.75]
.300 [7.62]
.484 [12.29]
.400 [10.16]
.584 [14.83]
.500 [12.70]
.684 [17.37]
.600 [15.24]
.784 [19.91]
.700 [17.78]
.884 [22.45]
.800 [20.32]
.984 [24.99]
.900 [22.86]
1.084 [27.53]
1.000 [25.40]
1.184 [30.07]
1.100 [27.94]
1.284 [32.61]
1.200 [30.48]
1.384 [35.15]
1.300 [33.02]
1.484 [37.69]
1.400 [35.56]
1.584 [40.23]
1.500 [38.10]
1.684 [42.77]
1.600 [40.64]
1.784 [45.31]
1.700 [43.18]
1.884 [47.85]
1.800 [45.72]
1.984 [50.39]
1.900 [48.26]
Post Plating/Part Nos.
Plating A
Plating B
87232-1
87233-1
87232-2
87233-2
87232-3
87233-3
87232-4
87233-4
87232-5
87233-5
87232-6
87233-6
87232-7
87233-7
87232-8
87233-8
87232-9
87233-9
1-87232-0
1-87233-0
1-87232-1
1-87233-1
1-87232-2
1-87233-2
1-87232-3
1-87233-3
1-87232-4
1-87233-4
1-87232-5
1-87233-5
1-87232-6
1-87233-6
1-87232-7
1-87233-7
1-87232-8
1-87233-8
1-87232-9
1-87233-9
2-87232-0
2-87233-0
5
93
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Standard Headers––Unshrouded, Single Row, .100 [2.54]
Centerline (Continued)
No. of
Pos.
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
Dimensions
A
B
2.084 [52.93]
2.000 [50.80]
2.184 [55.47]
2.100 [53.34]
2.284 [58.01]
2.200 [55.88]
2.384 [60.55
2.300 [58.42]
2.484 [63.09]
2.400 [60.96]
2.584 [65.63]
2.500 [63.50]
2.684 [68.17]
2.600 [66.04]
2.784 [70.71]
2.700 [68.58]
2.884 [73.25]
2.800 [71.12]
2.984 [75.79]
2.900 [73.66]
3.084 [78.33]
3.000 [76.20]
3.184 [80.87]
3.100 [78.74]
3.284 [83.41]
3.200 [81.28]
3.385 [85.95]
3.300 [83.82]
3.484 [88.49]
3.400 [86.36]
3.584 [91.03]
3.500 [88.90]
3.684 [93.57]
3.600 [91.44]
3.784 [96.11]
3.700 [93.98]
3.884 [98.65]
3.800 [96.52]
3.984 [101.19]
3.900 [99.06]
Post Plating/Part Nos.
Plating A
Plating B
2-87232-1
2-87233-1
2-87232-2
2-87233-2
2-87232-3
2-87233-3
2-87232-4
2-87233-4
2-87232-5
2-87233-5
2-87232-6
2-87233-6
2-87232-7
2-87233-7
2-87232-8
2-87233-8
2-87232-9
2-87233-9
3-87232-0
3-87233-0
3-87232-1
3-87233-1
3-87232-2
3-87233-2
3-87232-3
3-87233-3
3-87232-4
3-87233-4
3-87232-5
3-87233-5
3-87232-6
3-87233-6
3-87232-7
3-87233-7
3-87232-8
3-87233-8
3-87232-9
3-87233-9
4-87232-0
4-87233-0
5
94
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Standard Headers—Unshrouded, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline
.025 [0.64] Square
Straight Post
.100
[2.54]
.200
Ref.
[5.08]
(Contact Area)
A
.100
Typ.
[2.54]
.318
[8.08]
.090
[2.29]
.046/.038
[1.17/0.97]
.042
[1.07]
Typ.
Material and Finish:
Housing—Black thermoplastic,
94V-0 rated
Posts—Copper alloy, plated as follows:
Plating A—Selectively plated .000030
[0.00076] gold on contact area, with
gold flash over .000050 [0.00127] nickel
on entire post
Plating B—Selectively plated .000015
[0.00038] gold on contact area, with
gold flash over .000050 [0.00127] nickel
on entire post
Tin-Lead/Nickel—Plating option
available; minimum order quantities may
apply. Consult Tyco Electronics.
.125
[3.18]
.050
Max. Typ.
[1.27]
B
B
.100*
[2.54]
.100*
[2.54]
.035±.003
Dia. Typ.
[0.89±0.08]
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
Related Product Data:
Mateable Connectors—Refer
to the Mating Post Selection Guide
(page 89)
Accessories:
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
No. of
Pos.
Barrier Insert—page 221
Technical Documents (page 294):
See mating connector for applicable
product and application specifications.
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
Dimensions
A
B
.084 [2.13]
—
.184 [4.67]
.100 [2.54]
.284 [7.21]
.200 [5.08]
.384 [9.75]
.300 [7.62]
.484 [12.29]
.400 [10.16]
.584 [14.83]
.500 [12.70]
.684 [17.37]
.600 [15.24]
.784 [19.91]
.700 [17.78]
.884 [22.45]
.800 [20.32]
.984 [24.99]
.900 [22.86]
1.084 [27.53]
1.000 [25.40]
1.184 [30.07]
1.100 [27.94]
1.284 [32.61]
1.200 [30.48]
1.384 [35.15]
1.300 [33.02]
1.484 [37.69]
1.400 [35.56]
1.584 [40.23]
1.500 [38.10]
1.684 [42.77]
1.600 [40.64]
1.784 [45.31]
1.700 [43.18]
1.884 [47.85]
1.800 [45.72]
1.984 [50.39]
1.900 [48.26]
Post Plating/Part Nos.
Plating A
Plating B
1-87215-0
87227-1
1-87215-1
87227-2
1-87215-2
87227-3
87215-1
87227-4
87215-2
87227-5
87215-3
87227-6
87215-4
87227-7
87215-5
87227-8
87215-6
87227-9
87215-7
1-87227-0
1-87215-3
1-87227-1
87215-8
1-87227-2
87215-9
1-87227-3
1-87215-4
1-87227-4
1-87215-5
1-87227-5
1-87215-6
1-87227-6
1-87215-7
1-87227-7
1-87215-8
1-87227-8
1-87215-9
1-87227-9
2-87215-0
2-87227-0
5
95
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Standard Headers—Unshrouded, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline (Continued)
No. of
Pos.
42
44
46
48
50
52
54
56
58
60
62
64
66
68
70
72
74
76
78
80
Dimensions
A
B
2.084 [52.93]
2.000 [50.80]
2.184 [55.47]
2.100 [53.34]
2.284 [58.01]
2.200 [55.88]
2.384 [60.55]
2.300 [58.42]
2.484 [63.09]
2.400 [60.96]
2.584 [65.63]
2.500 [63.50]
2.684 [68.17]
2.600 [66.04]
2.784 [70.71]
2.700 [68.58]
2.884 [73.25]
2.800 [71.12]
2.984 [75.79]
2.900 [73.66]
3.084 [78.33]
3.000 [76.20]
3.184 [80.87]
3.100 [78.74]
3.284 [83.41]
3.200 [81.28]
3.384 [85.95]
3.300 [83.82]
3.484 [88.49]
3.400 [86.36]
3.584 [91.03]
3.500 [88.90]
3.684 [93.57]
3.600 [91.44]
3.784 [96.11]
3.700 [93.98]
3.884 [98.65]
3.800 [96.52]
3.984 [101.19]
3.900 [99.06]
Post Plating/Part Nos.
Plating A
Plating B
2-87215-1
2-87227-1
2-87215-2
2-87227-2
2-87215-3
2-87227-3
2-87215-4
2-87227-4
2-87215-5
2-87227-5
2-87215-6
2-87227-6
2-87215-7
2-87227-7
2-87215-8
2-87227-8
2-87215-9
2-87227-9
3-87215-0
3-87227-0
3-87215-1
3-87227-1
3-87215-2
3-87227-2
3-87215-3
3-87227-3
3-87215-4
3-87227-4
3-87215-5
3-87227-5
3-87215-6
3-87227-6
3-87215-7
3-87227-7
3-87215-8
3-87227-8
3-87215-9
3-87227-9
4-87215-0
4-87227-0
5
96
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Standard Headers—Unshrouded, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline (Continued)
.025 [0.64] Square
Right-Angle Post
.200
Ref.
[5.08]
(Contact Area)
A
.042
[1.07]
Typ.
.289
[7.34]
.042
[1.07]
.100
[2.54]
.110
[2.79]
.069
[1.75]
.100
[2.54]
Typ.
Material and Finish:
Housing—Black thermoplastic,
94V-0 rated
Posts—Copper alloy, plated as follows:
Plating A—Selectively plated .000030
[0.00076] gold on contact area, with
gold flash over .000050 [0.00127] nickel
on entire post
Plating B—Selectively plated .000015
[0.00038] gold on contact area, with
gold flash over .000050 [0.00127] nickel
on entire post
Tin-Lead/Nickel—Plating option
available; minimum order quantities may
apply. Consult Tyco Electronics.
.318
[8.08]
.157
[3.99]
.100
[2.54]
B
B
.100*
[2.54]
.035±.003
Dia. Typ.
[0.89±0.08]
.100*
[2.54]
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
Related Product Data:
Mateable Connectors—Refer
to the Mating Post Selection Guide
(page 89)
Technical Documents (page 294):
See mating connector for applicable
product and application specifications.
No. of
Pos.
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
Dimensions
A
B
.084 [2.13]
—
.184 [4.67]
.100 [2.54]
.284 [7.21]
.200 [5.08]
.384 [9.75]
.300 [7.62]
.484 [12.29]
.400 [10.16]
.584 [14.83]
.500 [12.70]
.684 [17.37]
.600 [15.24]
.784 [19.91]
.700 [17.78]
.884 [22.45]
.800 [20.32]
.984 [24.99]
.900 [22.86]
1.084 [27.53]
1.000 [25.40]
1.184 [30.07]
1.100 [27.94]
1.284 [32.61]
1.200 [30.48]
1.384 [35.15]
1.300 [33.02]
1.484 [37.69]
1.400 [35.56]
1.584 [40.23]
1.500 [38.10]
1.684 [42.77]
1.600 [40.64]
1.784 [45.31]
1.700 [43.18]
1.884 [47.85]
1.800 [45.72]
1.984 [50.39]
1.900 [48.26]
Post Plating/Part Nos.
Plating A
Plating B
1-86479-3
87230-1
1-86479-4
87230-2
1-86479-5
87230-3
1-86479-6
87230-4
86479-3
87230-5
86479-4
87230-6
86479-5
87230-7
86479-2
87230-8
86479-6
87230-9
86479-1
1-87230-0
1-86479-7
1-87230-1
86479-7
1-87230-2
1-86479-0
1-87230-3
1-86479-8
1-87230-4
1-86479-9
1-87230-5
2-86479-0
1-87230-6
2-86479-1
1-87230-7
2-86479-2
1-87230-8
2-86479-3
1-87230-9
2-86479-4
2-87230-0
5
97
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Standard Headers—Unshrouded, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline (Continued)
No. of
Pos.
42
44
46
48
50
52
54
56
58
60
62
64
66
68
70
72
74
76
78
80
Dimensions
A
B
2.084 [52.93]
2.000 [50.80]
2.184 [55.47]
2.100 [53.34]
2.284 [58.01]
2.200 [55.88]
2.384 [60.55]
2.300 [58.42]
2.484 [63.09]
2.400 [60.96]
2.584 [65.63]
2.500 [63.50]
2.684 [68.17]
2.600 [66.04]
2.784 [70.71]
2.700 [68.58]
2.884 [73.25]
2.800 [71.12]
2.984 [75.79]
2.900 [73.66]
3.084 [78.33]
3.000 [76.20]
3.184 [80.87]
3.100 [78.74]
3.284 [83.41]
3.200 [81.28]
3.384 [85.95]
3.300 [83.82]
3.484 [88.49]
3.400 [86.36]
3.584 [91.03]
3.500 [88.90]
3.684 [93.57]
3.600 [91.44]
3.784 [96.11]
3.700 [93.98]
3.884 [98.65]
3.800 [96.52]
3.984 [101.19]
3.900 [99.06]
Post Plating/Part Nos.
Plating A
Plating B
2-86479-5
2-87230-1
2-86479-6
2-87230-2
2-86479-7
2-87230-3
2-86479-8
2-87230-4
2-86479-9
2-87230-5
3-86479-0
2-87230-6
3-86479-1
2-87230-7
3-86479-2
2-87230-8
3-86479-3
2-87230-9
3-86479-4
3-87230-0
3-86479-5
3-87230-1
3-86479-6
3-87230-2
3-86479-7
3-87230-3
3-86479-8
3-87230-4
3-86479-9
3-87230-5
4-86479-0
3-87230-6
4-86479-1
3-87230-7
4-86479-2
3-87230-8
4-86479-3
3-87230-9
4-86479-4
4-87230-0
5
98
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Standard Headers—Unshrouded, Triple-Row, .100 [2.54] Centerline
.025 [0.64] Square
Straight Post
A
.338
[8.59]
.100
[2.54]
Typ.
B
.042
[1.07]
Typ.
Material and Finish:
Housing—Black thermoplastic,
94V-0 rated
Posts—Copper alloy, duplex plated
000030 [0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
bright tin-lead on solder area, with entire
post underplated .000050 [0.00127] nickel
.120
[3.05]
.069
[1.75]
Typ.
.230
[5.84]
.185
Ref.
[4.70]
(Contact Area)
Technical Documents (page 294):
.100
[2.54]
Typ.
See mating connector for applicable
product and application specifications.
.120
[3.05]
.100*
[2.54]
B
.100*
[2.54]
.035±.003
Dia. Typ.
[0.89±0.08]
.100*
[2.54]
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
Dimensions
No. of
Pos.
A
B
9
12
15
18
21
24
27
30
33
42
45
60
69
72
96
120
.284 [7.21]
.384 [9.75]
.484 [12.29]
.584 [14.83]
.684 [17.37]
.784 [19.91]
.884 [22.45]
.984 [24.99]
1.084 [27.53]
1.384 [35.15]
1.484 [37.69]
1.984 [50.39]
2.284 [58.01]
2.384 [60.55]
3.184 [80.87]
3.984 [101.19]
.200 [5.08]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.300 [33.02]
1.400 [35.56]
1.900 [48.26]
2.200 [55.88]
2.300 [58.42]
3.100 [78.74]
3.900 [99.06]
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
Part Nos.
103817-1
103817-2
103817-3
103817-4
103817-5
103817-6
103817-7
103817-8
103817-9
1-103817-2
1-103817-3
1-103817-8
2-103817-1
2-103817-2
3-103817-0
3-103817-8
5
99
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Breakaway and Retention Headers—Unshrouded
Product Facts
■
Design and inventory
versatility—headers can be
broken into any size needed
■
Variety of popular sizes
available
■
Substantial time/labor
savings—install all posts
at one time
■
Vertical and right-angle
versions available in
single- and double-row
configurations
■
Phosphor bronze posts
■
Choice of gold duplex or
tin-lead plated posts
■
Post lengths include .230
[5.84] and .318 [8.08] for
connector mating
■
Board retention feature
available
■
Flame retardant, black
thermoplastic housings;
94V-0 rated
■
■
Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
Certified by Canadian
Standards
Association,
File No. LR 7189
Photo 98186
Performance
Characteristics
Electrical:
Insulation Resistance—5,000
megohms minimum initial
Dielectric Withstanding Voltage—
750 V rms at sea level
Environmental:
Operating Temperature—
-65°C to +105°C (black thermoplastic
housings)
Current—3 amperes maximum
per contact (dependent upon mating
receptacle)
5
100
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Breakaway Headers—Unshrouded, Single-Row, .100 [2.54] Centerline
.025 [0.64] Square
Straight Post
.092
[2.34]
A
B
.090
[2.29]
E Ref.
(Contact
Area)
D
C
.042
[1.07]
Typ.
Material and Finish:
Housing—Black thermoplastic,
94V-0 rated
Posts—Phosphor bronze, plated as
follows:
Plating A—Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin-lead on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating B—Duplex plated .000015
[0.00038] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin-lead on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating C—.000100-.000200
[0.00254-0.00508] tin-lead over
.000050 [0.00127] nickel on entire post
B
.100*
[2.54]
.035±.003
Dia. Typ.
[0.89±0.08]
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
Related Product Data:
Mateable Connectors—Refer
to the Mating Post Selection Guide
(page 89)
Technical Documents (page 294):
See mating connector for applicable
product and application specifications.
Dimensions
No. of
Pos.
1
2
3
4
5
6
7
8
9
10
A
.084 [2.13]
.184 [4.67]
.284 [7.21]
.384 [9.75]
.484 [12.29]
.584 [14.83]
.684 [17.37]
.784 [19.91]
.884 [22.45]
.984 [24.99]
B
—
.100 [2.54]
.200 [5.08]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
C = .090 [2.29]
C = .120 [3.05]
C = .125 [3.18]
D = .230 [5.84]
D = .230 [5.84]
D = .318 [8.08]
E = .185 [4.70]
E = .185 [4.70]
E = .200 [5.08]
Post Plating/Part Nos.
Post Plating/Part Nos.
Post Plating/Part Nos.
Plating A
Plating C
Plating A
Plating B
Plating C
Plating A
Plating B
Plating C
103747-1
103741-1
103239-1
103185-1
103327-1
102976-1
102972-1
103321-1
103747-2
103741-2
103239-2
103185-2
103327-2
102976-2
102972-2
103321-2
103747-3
103741-3
103239-3
103185-3
103327-3
102976-3
102972-3
103321-3
103747-4
103741-4
103239-4
103185-4
103327-4
102976-4
102972-4
103321-4
103747-5
103741-5
103239-5
103185-5
103327-5
102976-5
102972-5
103321-5
103747-6
103741-6
103239-6
103185-6
103327-6
102976-6
102972-6
103321-6
103747-7
103741-7
103239-7
103185-7
103327-7
102976-7
102972-7
103321-7
103747-8
103741-8
103239-8
103185-8
103327-8
102976-8
102972-8
103321-8
103747-9
103741-9
103239-9
103185-9
103327-9
102976-9
102972-9
103321-9
1-103747-0 1-103741-0 1-103239-0 1-103185-0 1-103327-0 1-102976-0 1-102972-0 1-103321-0
5
Notes: 1. Headers may be broken to desired number of positions using Tool Kit No. 314818-1 (not shown).
2. Other tail lengths are available, consult Tyco Electronics.
101
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Breakaway Headers––Unshrouded, Single Row, .100 [2.54]
Centerline (Continued)
Dimensions
No. of
Pos.
A
B
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
1.084 [27.53]
1.184 [30.07]
1.284 [32.61]
1.384 [35.15]
1.484 [37.69]
1.584 [40.23]
1.684 [42.77]
1.784 [45.31]
1.884 [47.85]
1.984 [50.39]
2.084 [52.93]
2.184 [55.47]
2.284 [58.01]
2.384 [60.55]
2.484 [63.09]
2.584 [65.63]
2.684 [68.17]
2.784 [70.71]
2.884 [73.25]
2.984 [75.79]
3.084 [78.33]
3.184 [80.87]
3.284 [83.41]
3.384 [85.95]
3.484 [88.49]
3.584 [91.03]
3.684 [93.57]
3.784 [96.11]
3.884 [98.65]
3.984 [101.19]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
2.100 [53.34]
2.200 [55.88]
2.300 [58.42]
2.400 [60.96]
2.500 [63.50]
2.600 [66.04]
2.700 [68.58]
2.800 [71.12]
2.900 [73.66]
3.000 [76.20]
3.100 [78.74]
3.200 [81.28]
3.300 [83.82]
3.400 [86.36]
3.500 [88.90]
3.600 [91.44]
3.700 [93.98]
3.800 [96.52]
3.900 [99.06]
C = .090 [2.29]
D = .230 [5.84]
E = .185 [4.70]
Post Plating/Part Nos.
Plating A
Plating C
1-103747-1 1-103741-1
1-103747-2 1-103741-2
1-103747-3 1-103741-3
1-103747-4 1-103741-4
1-103747-5 1-103741-5
1-103747-6 1-103741-6
1-103747-7 1-103741-7
1-103747-8 1-103741-8
1-103747-9 1-103741-9
2-103747-0 2-103741-0
2-103747-1 2-103741-1
2-103747-2 2-103741-2
2-103747-3 2-103741-3
2-103747-4 2-103741-4
2-103747-5 2-103741-5
2-103747-6 2-103741-6
2-103747-7 2-103741-7
2-103747-8 2-103741-8
2-103747-9 2-103741-9
3-103747-0 3-103741-0
3-103747-1 3-103741-1
3-103747-2 3-103741-2
3-103747-3 3-103741-3
3-103747-4 3-103741-4
3-103747-5 3-103741-5
3-103747-6 3-103741-6
3-103747-7 3-103741-7
3-103747-8 3-103741-8
3-103747-9 3-103741-9
4-103747-0 4-103741-0
C = .120 [3.05]
D = .230 [5.84]
E = .185 [4.70]
Post Plating/Part Nos.
Plating A
Plating B
Plating C
1-103239-1 1-103185-1 1-103327-1
1-103239-2 1-103185-2 1-103327-2
1-103239-3 1-103185-3 1-103327-3
1-103239-4 1-103185-4 1-103327-4
1-103239-5 1-103185-5 1-103327-5
1-103239-6 1-103185-6 1-103327-6
1-103239-7 1-103185-7 1-103327-7
1-103239-8 1-103185-8 1-103327-8
1-103239-9 1-103185-9 1-103327-9
2-103239-0 2-103185-0 2-103327-0
2-103239-1 2-103185-1 2-103327-1
2-103239-2 2-103185-2 2-103327-2
2-103239-3 2-103185-3 2-103327-3
2-103239-4 2-103185-4 2-103327-4
2-103239-5 2-103185-5 2-103327-5
2-103239-6 2-103185-6 2-103327-6
2-103239-7 2-103185-7 2-103327-7
2-103239-8 2-103185-8 2-103327-8
2-103239-9 2-103185-9 2-103327-9
3-103239-0 3-103185-0 3-103327-0
3-103239-1 3-103185-1 3-103327-1
3-103239-2 3-103185-2 3-103327-2
3-103239-3 3-103185-3 3-103327-3
3-103239-4 3-103185-4 3-103327-4
3-103239-5 3-103185-5 3-103327-5
3-103239-6 3-103185-6 3-103327-6
3-103239-7 3-103185-7 3-103327-7
3-103239-8 3-103185-8 3-103327-8
3-103239-9 3-103185-9 3-103327-9
4-103239-0 4-103185-0 4-103327-0
C = .125 [3.18]
D = .318 [8.08]
E = .200 [5.08]
Post Plating/Part Nos.
Plating A
Plating B
Plating C
1-102976-1 1-102972-1 1-103321-1
1-102976-2 1-102972-2 1-103321-2
1-102976-3 1-102972-3 1-103321-3
1-102976-4 1-102972-4 1-103321-4
1-102976-5 1-102972-5 1-103321-5
1-102976-6 1-102972-6 1-103321-6
1-102976-7 1-102972-7 1-103321-7
1-102976-8 1-102972-8 1-103321-8
1-102976-9 1-102972-9 1-103321-9
2-102976-0 2-102972-0 2-103321-0
2-102976-1 2-102972-1 2-103321-1
2-102976-2 2-102972-2 2-103321-2
2-102976-3 2-102972-3 2-103321-3
2-102976-4 2-102972-4 2-103321-4
2-102976-5 2-102972-5 2-103321-5
2-102976-6 2-102972-6 2-103321-6
2-102976-7 2-102972-7 2-103321-7
2-102976-8 2-102972-8 2-103321-8
2-102976-9 2-102972-9 2-103321-9
3-102976-0 3-102972-0 3-103321-0
3-102976-1 3-102972-1 3-103321-1
3-102976-2 3-102972-2 3-103321-2
3-102976-3 3-102972-3 3-103321-3
3-102976-4 3-102972-4 3-103321-4
3-102976-5 3-102972-5 3-103321-5
3-102976-6 3-102972-6 3-103321-6
3-102976-7 3-102972-7 3-103321-7
3-102976-8 3-102972-8 3-103321-8
3-102976-9 3-102972-9 3-103321-9
4-102976-0 4-102972-0 4-103321-0
Notes: 1. Headers may be broken to desired number of positions using Tool Kit No. 314818-1 (not shown).
2. Other tail lengths are available, consult Tyco Electronics.
5
102
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Breakaway Headers––Unshrouded, Single Row, .100 [2.54]
Centerline (Continued)
.025 [0.64] Square
Right-Angle Post
A
B
E Ref.
(Contact Area)
Material and Finish:
.138
[3.51]
Housing—Black thermoplastic,
94V-0 rated
Posts—Phosphor bronze, plated as
follows:
Plating A—Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin-lead on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating B—Duplex plated .000015
[0.00038] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin-lead on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating C—.000100-.000200
[0.00254-0.00508] tin-lead over
.000050 [0.00127] nickel on entire post
D
C
.140
[3.56]
.042
[1.07]
Typ.
B
.100*
[2.54]
.035±.003
Dia. Typ.
[0.89±0.08]
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
Related Product Data:
Mateable Connectors—Refer
to the Mating Post Selection Guide
(page 89)
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
Technical Documents (page 294):
See mating connector for applicable
product and application specifications.
Dimensions
No. of
Pos.
A
1
2
3
4
5
6
7
8
9
10
.084 [2.13]
.184 [4.67]
.284 [7.21]
.384 [9.75]
.484 [12.29]
.584 [14.83]
.684 [17.37]
.784 [19.91]
.884 [22.45]
.984 [24.99]
B
—
.100 [2.54]
.200 [5.08]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
C = .090 [2.29]
C = .120 [3.05]
C = .110 [2.79]
D = .230 [5.84]
D = .230 [5.84]
D = .318 [8.08]
E = .185 [4.70]
E = .185 [4.70]
E = .200 [5.08]
Post Plating/Part Nos.
Post Plating/Part Nos.
Post Plating/Part Nos.
Plating A
Plating C
Plating A
Plating B
Plating C
Plating A
Plating B
Plating C
103765-1
103759-1
103148-1
103325-1
103329-1
102978-1
102974-1
103323-1
103765-2
103759-2
103148-2
103325-2
103329-2
102978-2
102974-2
103323-2
103765-3
103759-3
103148-3
103325-3
103329-3
102978-3
102974-3
103323-3
103765-4
103759-4
103148-4
103325-4
103329-4
102978-4
102974-4
103323-4
103765-5
103759-5
103148-5
103325-5
103329-5
102978-5
102974-5
103323-5
103765-6
103759-6
103148-6
103325-6
103329-6
102978-6
102974-6
103323-6
103765-7
103759-7
103148-7
103325-7
103329-7
102978-7
102974-7
103323-7
103765-8
103759-8
103148-8
103325-8
103329-8
102978-8
102974-8
103323-8
103765-9
103759-9
103148-9
103325-9
103329-9
102978-9
102974-9
103323-9
1-103765-0 1-103759-0 1-103148-0 1-103325-0 1-103329-0 1-102978-0 1-102974-0 1-103323-0
5
Notes: 1. Headers may be broken to desired number of positions using Tool Kit No. 314818-1 (not shown).
2. Other tail lengths are available, consult Tyco Electronics.
103
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Breakaway Headers––Unshrouded, Single Row, .100 [2.54]
Centerline (Continued)
Dimensions
No. of
Pos.
A
B
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
1.084 [27.53]
1.184 [30.07]
1.284 [32.61]
1.384 [35.15]
1.484 [37.69]
1.584 [40.23]
1.684 [42.77]
1.784 [45.31]
1.884 [47.85]
1.984 [50.39]
2.084 [52.93]
2.184 [55.47]
2.284 [58.01]
2.384 [60.55]
2.484 [63.09]
2.584 [65.63]
2.684 [68.17]
2.784 [70.71]
2.884 [73.25]
2.984 [75.79]
3.084 [78.33]
3.184 [80.87]
3.284 [83.41]
3.384 [85.95]
3.484 [88.49]
3.584 [91.03]
3.684 [93.57]
3.784 [96.11]
3.884 [98.65]
3.984 [101.19]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
2.100 [53.34]
2.200 [55.88]
2.300 [58.42]
2.400 [60.96]
2.500 [63.50]
2.600 [66.04]
2.700 [68.58]
2.800 [71.12]
2.900 [73.66]
3.000 [76.20]
3.100 [78.74]
3.200 [81.28]
3.300 [83.82]
3.400 [86.36]
3.500 [88.90]
3.600 [91.44]
3.700 [93.98]
3.800 [96.52]
3.900 [99.06]
C = .090 [2.29]
D = .230 [5.84]
E = .185 [4.70]
Post Plating/Part Nos.
Plating A
Plating C
1-103765-1 1-103759-1
1-103765-2 1-103759-2
1-103765-3 1-103759-3
1-103765-4 1-103759-4
1-103765-5 1-103759-5
1-103765-6 1-103759-6
1-103765-7 1-103759-7
1-103765-8 1-103759-8
1-103765-9 1-103759-9
2-103765-0 2-103759-0
2-103765-1 2-103759-1
2-103765-2 2-103759-2
2-103765-3 2-103759-3
2-103765-4 2-103759-4
2-103765-5 2-103759-5
2-103765-6 2-103759-6
2-103765-7 2-103759-7
2-103765-8 2-103759-8
2-103765-9 2-103759-9
3-103765-0 3-103759-0
3-103765-1 3-103759-1
3-103765-2 3-103759-2
3-103765-3 3-103759-3
3-103765-4 3-103759-4
3-103765-5 3-103759-5
3-103765-6 3-103759-6
3-103765-7 3-103759-7
3-103765-8 3-103759-8
3-103765-9 3-103759-9
4-103765-0 4-103759-0
C = .120 [3.05]
D = .230 [5.84]
E = .185 [4.70]
Post Plating/Part Nos.
Plating A
Plating B
Plating C
1-103148-1 1-103325-1 1-103329-1
1-103148-2 1-103325-2 1-103329-2
1-103148-3 1-103325-3 1-103329-3
1-103148-4 1-103325-4 1-103329-4
1-103148-5 1-103325-5 1-103329-5
1-103148-6 1-103325-6 1-103329-6
1-103148-7 1-103325-7 1-103329-7
1-103148-8 1-103325-8 1-103329-8
1-103148-9 1-103325-9 1-103329-9
2-103148-0 2-103325-0 2-103329-0
2-103148-1 2-103325-1 2-103329-1
2-103148-2 2-103325-2 2-103329-2
2-103148-3 2-103325-3 2-103329-3
2-103148-4 2-103325-4 2-103329-4
2-103148-5 2-103325-5 2-103329-5
2-103148-6 2-103325-6 2-103329-6
2-103148-7 2-103325-7 2-103329-7
2-103148-8 2-103325-8 2-103329-8
2-103148-9 2-103325-9 2-103329-9
3-103148-0 3-103325-0 3-103329-0
3-103148-1 3-103325-1 3-103329-1
3-103148-2 3-103325-2 3-103329-2
3-103148-3 3-103325-3 3-103329-3
3-103148-4 3-103325-4 3-103329-4
3-103148-5 3-103325-5 3-103329-5
3-103148-6 3-103325-6 3-103329-6
3-103148-7 3-103325-7 3-103329-7
3-103148-8 3-103325-8 3-103329-8
3-103148-9 3-103325-9 3-103329-9
4-103148-0 4-103325-0 4-103329-0
C = .110 [2.79]
D = .318 [8.08]
E = .200 [5.08]
Post Plating/Part Nos.
Plating A
Plating B
Plating C
1-102978-1 1-102974-1 1-103323-1
1-102978-2 1-102974-2 1-103323-2
1-102978-3 1-102974-3 1-103323-3
1-102978-4 1-102974-4 1-103323-4
1-102978-5 1-102974-5 1-103323-5
1-102978-6 1-102974-6 1-103323-6
1-102978-7 1-102974-7 1-103323-7
1-102978-8 1-102974-8 1-103323-8
1-102978-9 1-102974-9 1-103323-9
2-102978-0 2-102974-0 2-103323-0
2-102978-1 2-102974-1 2-103323-1
2-102978-2 2-102974-2 2-103323-2
2-102978-3 2-102974-3 2-103323-3
2-102978-4 2-102974-4 2-103323-4
2-102978-5 2-102974-5 2-103323-5
2-102978-6 2-102974-6 2-103323-6
2-102978-7 2-102974-7 2-103323-7
2-102978-8 2-102974-8 2-103323-8
2-102978-9 2-102974-9 2-103323-9
3-102978-0 3-102974-0 3-103323-0
3-102978-1 3-102974-1 3-103323-1
3-102978-2 3-102974-2 3-103323-2
3-102978-3 3-102974-3 3-103323-3
3-102978-4 3-102974-4 3-103323-4
3-102978-5 3-102974-5 3-103323-5
3-102978-6 3-102974-6 3-103323-6
3-102978-7 3-102974-7 3-103323-7
3-102978-8 3-102974-8 3-103323-8
3-102978-9 3-102974-9 3-103323-9
4-102978-0 4-102974-0 4-103323-0
Notes: 1. Headers may be broken to desired number of positions using Tool Kit No. 314818-1 (not shown).
2. Other tail lengths are available, consult Tyco Electronics.
5
104
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Breakaway Headers—Unshrouded, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline
A
.025 [0.64] Square
Straight-Angle Post
B
.192
[4.88]
E Ref.
(Contact Area)
D
C
.042
[1.07]
Typ.
Material and Finish:
Housing—Black thermoplastic,
94V-0 rated
Posts—Phosphor bronze, plated as
follows:
Plating A—Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin-lead on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating B—Duplex plated .000015
[0.00038] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin-lead on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating C—.000100-.000200
[0.00254-0.00508] tin-lead over
.000050 [0.00127] nickel on entire post
.090
[2.29]
.100
[2.54]
B
.100*
[2.54]
.100*
[2.54]
.035±.003 Dia. Typ.
[0.89±0.08]
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
Related Product Data:
Mateable Connectors—Refer
to the Mating Post Selection Guide
(page 89)
Accessories:
Barrier Insert—page 221
Technical Documents (page 294):
See mating connector for applicable
product and application specifications.
C = .090 [2.29]
C = .120 [3.05]
C = .125 [3.18]
D = .230 [5.84]
D = .230 [5.84]
D = .318 [8.08]
E = .185 [4.70]
E = .185 [4.70]
E = .200 [5.08]
A
B
Post Plating/Part Nos.
Post Plating/Part Nos.
Post Plating/Part Nos.
Plating A
Plating C
Plating A
Plating B
Plating C
Plating A
Plating B
Plating C
.084 [2.13]
—
103783-1
103777-1
103240-1
103186-1
103328-1
102977-1
102973-1
103322-1
.184 [4.67]
.100 [2.54]
103783-2
103777-2
103240-2
103186-2
103328-2
102977-2
102973-2
103322-2
.284 [7.21]
.200 [5.08]
103783-3
103777-3
103240-3
103186-3
103328-3
102977-3
102973-3
103322-3
.384 [9.75]
.300 [7.62]
103783-4
103777-4
103240-4
103186-4
103328-4
102977-4
102973-4
103322-4
.484 [12.29]
.400 [10.16]
103783-5
103777-5
103240-5
103186-5
103328-5
102977-5
102973-5
103322-5
.584 [14.83]
.500 [12.70]
103783-6
103777-6
103240-6
103186-6
103328-6
102977-6
102973-6
103322-6
.684 [17.37]
.600 [15.24]
103783-7
103777-7
103240-7
103186-7
103328-7
102977-7
102973-7
103322-7
.784 [19.91]
.700 [17.78]
103783-8
103777-8
103240-8
103186-8
103328-8
102977-8
102973-8
103322-8
.884 [22.45]
.800 [20.32]
103783-9
103777-9
103240-9
103186-9
103328-9
102977-9
102973-9
103322-9
.984 [24.99]
.900 [22.86]
1-103783-0 1-103777-0 1-103240-0 1-103186-0 1-103328-0 1-102977-0 1-102973-0 1-103322-0
1. Headers may be broken to desired number of positions using Tool Kit No. 314818-1 (not shown).
2. Other tail lengths are available, consult Tyco Electronics.
No. of
Pos.
2
4
6
8
10
12
14
16
18
20
Notes:
Dimensions
5
105
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Breakaway Headers—Unshrouded, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline (Continued)
Dimensions
No. of
Pos.
A
B
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
62
64
66
68
70
72
74
76
78
80
1.084 [27.53]
1.184 [30.07]
1.284 [32.61]
1.384 [35.15]
1.484 [37.69]
1.584 [40.23]
1.684 [42.77]
1.784 [45.31]
1.884 [47.85]
1.984 [50.39]
2.084 [52.93]
2.184 [55.47]
2.284 [58.01]
2.384 [60.55]
2.484 [63.09]
2.584 [65.63]
2.684 [68.17]
2.784 [70.71]
2.884 [73.25]
2.984 [75.79]
3.084 [78.33]
3.184 [80.87]
3.284 [83.41]
3.384 [85.95]
3.484 [88.49]
3.584 [91.03]
3.684 [93.57]
3.784 [96.11]
3.884 [98.65]
3.984 [101.19]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
2.100 [53.34]
2.200 [55.88]
2.300 [58.42]
2.400 [60.96]
2.500 [63.50]
2.600 [66.04]
2.700 [68.58]
2.800 [71.12]
2.900 [73.66]
3.000 [76.20]
3.100 [78.74]
3.200 [81.28]
3.300 [83.82]
3.400 [86.36]
3.500 [88.90]
3.600 [91.44]
3.700 [93.98]
3.800 [96.52]
3.900 [99.06]
C = .090 [2.29]
D = .230 [5.84]
E = .185 [4.70]
Post Plating/Part Nos.
Plating A
Plating C
1-103783-1 1-103777-1
1-103783-2 1-103777-2
1-103783-3 1-103777-3
1-103783-4 1-103777-4
1-103783-5 1-103777-5
1-103783-6 1-103777-6
1-103783-7 1-103777-7
1-103783-8 1-103777-8
1-103783-9 1-103777-9
2-103783-0 2-103777-0
2-103783-1 2-103777-1
2-103783-2 2-103777-2
2-103783-3 2-103777-3
2-103783-4 2-103777-4
2-103783-5 2-103777-5
2-103783-6 2-103777-6
2-103783-7 2-103777-7
2-103783-8 2-103777-8
2-103783-9 2-103777-9
3-103783-0 3-103777-0
3-103783-1 3-103777-1
3-103783-2 3-103777-2
3-103783-3 3-103777-3
3-103783-4 3-103777-4
3-103783-5 3-103777-5
3-103783-6 3-103777-6
3-103783-7 3-103777-7
3-103783-8 3-103777-8
3-103783-9 3-103777-9
4-103783-0 4-103777-0
C = .120 [3.05]
D = .230 [5.84]
E = .185 [4.70]
Post Plating/Part Nos.
Plating A
Plating B
Plating C
1-103240-1 1-103186-1 1-103328-1
1-103240-2 1-103186-2 1-103328-2
1-103240-3 1-103186-3 1-103328-3
1-103240-4 1-103186-4 1-103328-4
1-103240-5 1-103186-5 1-103328-5
1-103240-6 1-103186-6 1-103328-6
1-103240-7 1-103186-7 1-103328-7
1-103240-8 1-103186-8 1-103328-8
1-103240-9 1-103186-9 1-103328-9
2-103240-0 2-103186-0 2-103328-0
2-103240-1 2-103186-1 2-103328-1
2-103240-2 2-103186-2 2-103328-2
2-103240-3 2-103186-3 2-103328-3
2-103240-4 2-103186-4 2-103328-4
2-103240-5 2-103186-5 2-103328-5
2-103240-6 2-103186-6 2-103328-6
2-103240-7 2-103186-7 2-103328-7
2-103240-8 2-103186-8 2-103328-8
2-103240-9 2-103186-9 2-103328-9
3-103240-0 3-103186-0 3-103328-0
3-103240-1 3-103186-1 3-103328-1
3-103240-2 3-103186-2 3-103328-2
3-103240-3 3-103186-3 3-103328-3
3-103240-4 3-103186-4 3-103328-4
3-103240-5 3-103186-5 3-103328-5
3-103240-6 3-103186-6 3-103328-6
3-103240-7 3-103186-7 3-103328-7
3-103240-8 3-103186-8 3-103328-8
3-103240-9 3-103186-9 3-103328-9
4-103240-0 4-103186-0 4-103328-0
C = .125 [3.18]
D = .318 [8.08]
E = .200 [5.08]
Post Plating/Part Nos.
Plating A
Plating B
Plating C
1-102977-1 1-102973-1 1-103322-1
1-102977-2 1-102973-2 1-103322-2
1-102977-3 1-102973-3 1-103322-3
1-102977-4 1-102973-4 1-103322-4
1-102977-5 1-102973-5 1-103322-5
1-102977-6 1-102973-6 1-103322-6
1-102977-7 1-102973-7 1-103322-7
1-102977-8 1-102973-8 1-103322-8
1-102977-9 1-102973-9 1-103322-9
2-102977-0 2-102973-0 2-103322-0
2-102977-1 2-102973-1 2-103322-1
2-102977-2 2-102973-2 2-103322-2
2-102977-3 2-102973-3 2-103322-3
2-102977-4 2-102973-4 2-103322-4
2-102977-5 2-102973-5 2-103322-5
2-102977-6 2-102973-6 2-103322-6
2-102977-7 2-102973-7 2-103322-7
2-102977-8 2-102973-8 2-103322-8
2-102977-9 2-102973-9 2-103322-9
3-102977-0 3-102973-0 3-103322-0
3-102977-1 3-102973-1 3-103322-1
3-102977-2 3-102973-2 3-103322-2
3-102977-3 3-102973-3 3-103322-3
3-102977-4 3-102973-4 3-103322-4
3-102977-5 3-102973-5 3-103322-5
3-102977-6 3-102973-6 3-103322-6
3-102977-7 3-102973-7 3-103322-7
3-102977-8 3-102973-8 3-103322-8
3-102977-9 3-102973-9 3-103322-9
4-102977-0 4-102973-0 4-103322-0
Notes: 1. Headers may be broken to desired number of positions using Tool Kit No. 314818-1 (not shown).
2. Other tail lengths are available, consult Tyco Electronics.
5
106
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Breakaway Headers—Unshrouded, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline
.025 [0.64] Square
Right-Angle Post
A
Material and Finish:
Housing—Black thermoplastic,
94V-0 rated
Posts—Phosphor bronze, plated as
follows:
Plating A—Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin-lead on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating B—Duplex plated .000015
[0.00038] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin-lead on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating C—.000100-.000200
[0.00254-0.00508] tin-lead over
.000050 [0.00127] nickel on entire post
B
.238
[6.05]
C
.100
[2.54]
D
.042
[1.07]
Typ.
.100
[2.54]
.140
[3.56]
B
.100*
[2.54]
Related Product Data:
E Ref.
(Contact Area)
.100*
[2.54]
Mateable Connectors—Refer
to the Mating Post Selection Guide
(page 89)
.035±.003
Dia. Typ.
[0.89±0.08]
Technical Documents (page 294):
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
See mating connector for applicable
product and application specifications.
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
C = .090 [2.29]
C = .120 [3.05]
C = .110 [2.79]
D = .230 [5.84]
D = .230 [5.84]
D = .318 [8.08]
No. of
E = .185 [4.70]
E = .185 [4.70]
E = .200 [5.08]
Pos.
A
B
Post Plating/Part Nos.
Post Plating/Part Nos.
Post Plating/Part Nos.
Plating A
Plating C
Plating A
Plating B
Plating C
Plating A
Plating B
Plating C
2
.084 [2.13]
—
103801-1
103795-1
103149-1
103326-1
103330-1
102979-1
102975-1
103324-1
4
.184 [4.67]
.100 [2.54]
103801-2
103795-2
103149-2
103326-2
103330-2
102979-2
102975-2
103324-2
6
.284 [7.21]
.200 [5.08]
103801-3
103795-3
103149-3
103326-3
103330-3
102979-3
102975-3
103324-3
8
.384 [9.75]
.300 [7.62]
103801-4
103795-4
103149-4
103326-4
103330-4
102979-4
102975-4
103324-4
10
.484 [12.29]
.400 [10.16]
103801-5
103795-5
103149-5
103326-5
103330-5
102979-5
102975-5
103324-5
12
.584 [14.83]
.500 [12.70]
103801-6
103795-6
103149-6
103326-6
103330-6
102979-6
102975-6
103324-6
14
.684 [17.37]
.600 [15.24]
103801-7
103795-7
103149-7
103326-7
103330-7
102979-7
102975-7
103324-7
16
.784 [19.91]
.700 [17.78]
103801-8
103795-8
103149-8
103326-8
103330-8
102979-8
102975-8
103324-8
18
.884 [22.45]
.800 [20.32]
103801-9
103795-9
103149-9
103326-9
103330-9
102979-9
102975-9
103324-9
20
.984 [24.99]
.900 [22.86]
1-103801-0 1-103795-0 1-103149-0 1-103326-0 1-103330-0 1-102979-0 1-102975-0 1-103324-0
Notes: 1. Headers may be broken to desired number of positions using Tool Kit No. 314818-1 (not shown).
2. Other tail lengths are available, consult Tyco Electronics.
Dimensions
5
107
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Breakaway Headers—Unshrouded, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline (Continued)
Dimensions
No. of
Pos.
A
B
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
62
64
66
68
70
72
74
76
78
80
1.084 [27.53]
1.184 [30.07]
1.284 [32.61]
1.384 [35.15]
1.484 [37.69]
1.584 [40.23]
1.684 [42.77]
1.784 [45.31]
1.884 [47.85]
1.984 [50.39]
2.084 [52.93]
2.184 [55.47]
2.284 [58.01]
2.384 [60.55]
2.484 [63.09]
2.584 [65.63]
2.684 [68.17]
2.784 [70.71]
2.884 [73.25]
2.984 [75.79]
3.084 [78.33]
3.184 [80.87]
3.284 [83.41]
3.384 [85.95]
3.484 [88.49]
3.584 [91.03]
3.684 [93.57]
3.784 [96.11]
3.884 [98.65]
3.984 [101.19]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
2.100 [53.34]
2.200 [55.88]
2.300 [58.42]
2.400 [60.96]
2.500 [63.50]
2.600 [66.04]
2.700 [68.58]
2.800 [71.12]
2.900 [73.66]
3.000 [76.20]
3.100 [78.74]
3.200 [81.28]
3.300 [83.82]
3.400 [86.36]
3.500 [88.90]
3.600 [91.44]
3.700 [93.98]
3.800 [96.52]
3.900 [99.06]
C = .090 [2.29]
D = .230 [5.84]
E = .185 [4.70]
Post Plating/Part Nos.
Plating A
Plating C
1-103801-1 1-103795-1
1-103801-2 1-103795-2
1-103801-3 1-103795-3
1-103801-4 1-103795-4
1-103801-5 1-103795-5
1-103801-6 1-103795-6
1-103801-7 1-103795-7
1-103801-8 1-103795-8
1-103801-9 1-103795-9
2-103801-0 2-103795-0
2-103801-1 2-103795-1
2-103801-2 2-103795-2
2-103801-3 2-103795-3
2-103801-4 2-103795-4
2-103801-5 2-103795-5
2-103801-6 2-103795-6
2-103801-7 2-103795-7
2-103801-8 2-103795-8
2-103801-9 2-103795-9
3-103801-0 3-103795-0
3-103801-1 3-103795-1
3-103801-2 3-103795-2
3-103801-3 3-103795-3
3-103801-4 3-103795-4
3-103801-5 3-103795-5
3-103801-6 3-103795-6
3-103801-7 3-103795-7
3-103801-8 3-103795-8
3-103801-9 3-103795-9
4-103801-0 4-103795-0
C = .120 [3.05]
D = .230 [5.84]
E = .185 [4.70]
Post Plating/Part Nos.
Plating A
Plating B
Plating C
1-103149-1 1-103326-1 1-103330-1
1-103149-2 1-103326-2 1-103330-2
1-103149-3 1-103326-3 1-103330-3
1-103149-4 1-103326-4 1-103330-4
1-103149-5 1-103326-5 1-103330-5
1-103149-6 1-103326-6 1-103330-6
1-103149-7 1-103326-7 1-103330-7
1-103149-8 1-103326-8 1-103330-8
1-103149-9 1-103326-9 1-103330-9
2-103149-0 2-103326-0 2-103330-0
2-103149-1 2-103326-1 2-103330-1
2-103149-2 2-103326-2 2-103330-2
2-103149-3 2-103326-3 2-103330-3
2-103149-4 2-103326-4 2-103330-4
2-103149-5 2-103326-5 2-103330-5
2-103149-6 2-103326-6 2-103330-6
2-103149-7 2-103326-7 2-103330-7
2-103149-8 2-103326-8 2-103330-8
2-103149-9 2-103326-9 2-103330-9
3-103149-0 3-103326-0 3-103330-0
3-103149-1 3-103326-1 3-103330-1
3-103149-2 3-103326-2 3-103330-2
3-103149-3 3-103326-3 3-103330-3
3-103149-4 3-103326-4 3-103330-4
3-103149-5 3-103326-5 3-103330-5
3-103149-6 3-103326-6 3-103330-6
3-103149-7 3-103326-7 3-103330-7
3-103149-8 3-103326-8 3-103330-8
3-103149-9 3-103326-9 3-103330-9
4-103149-0 4-103326-0 4-103330-0
C = .110 [2.79]
D = .318 [8.08]
E = .200 [5.08]
Post Plating/Part Nos.
Plating A
Plating B
Plating C
1-102979-1 1-102975-1 1-103324-1
1-102979-2 1-102975-2 1-103324-2
1-102979-3 1-102975-3 1-103324-3
1-102979-4 1-102975-4 1-103324-4
1-102979-5 1-102975-5 1-103324-5
1-102979-6 1-102975-6 1-103324-6
1-102979-7 1-102975-7 1-103324-7
1-102979-8 1-102975-8 1-103324-8
1-102979-9 1-102975-9 1-103324-9
2-102979-0 2-102975-0 2-103324-0
2-102979-1 2-102975-1 2-103324-1
2-102979-2 2-102975-2 2-103324-2
2-102979-3 2-102975-3 2-103324-3
2-102979-4 2-102975-4 2-103324-4
2-102979-5 2-102975-5 2-103324-5
2-102979-6 2-102975-6 2-103324-6
2-102979-7 2-102975-7 2-103324-7
2-102979-8 2-102975-8 2-103324-8
2-102979-9 2-102975-9 2-103324-9
3-102979-0 3-102975-0 3-103324-0
3-102979-1 3-102975-1 3-103324-1
3-102979-2 3-102975-2 3-103324-2
3-102979-3 3-102975-3 3-103324-3
3-102979-4 3-102975-4 3-103324-4
3-102979-5 3-102975-5 3-103324-5
3-102979-6 3-102975-6 3-103324-6
3-102979-7 3-102975-7 3-103324-7
3-102979-8 3-102975-8 3-103324-8
3-102979-9 3-102975-9 3-103324-9
4-102979-0 4-102975-0 4-103324-0
Notes: 1. Headers may be broken to desired number of positions using Tool Kit No. 314818-1 (not shown).
2. Other tail lengths are available, consult Tyco Electronics.
5
108
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Breakaway Retention Headers—Unshrouded, Single Row,
.100 [2.54] Centerline
.025 [0.64] Square
Straight Post (with Board
Retention Feature)
A
B
.092
[2.34]
.100
[2.54]
Typ.
E Ref.
(Contact
Area)
D
.090
[2.29]
Photo 98184-8
Material and Finish:
Housing—Black thermoplastic,
94V-0 rated
Posts—Phosphor bronze, plated as
follows:
Plating A—Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin-lead on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating B—Duplex plated .000015
[0.00038] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin-lead on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating C—.000100-.000200
[0.00254-0.00508] tin-lead over
.000050 [0.00127] nickel on entire post
Board Retention Feature
(See Note 1 Below.)
C
.042
[1.07]
(2 Plc.)
B
.100*
[2.54]
.040±.003 Dia. Typ.
[1.02±0.08]
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
Performance Characteristics:
Insertion Force—12 lb. [53.4N]
maximum
Retention Force—.25 lb. [1.11N]
minimum
Related Product Data:
Mateable Connectors—Refer
to the Mating Post Selection Guide
(page 89)
Technical Documents (page 294):
See mating connector for applicable
product and application specifications.
No. of
Pos.
Dimensions
A
B
3
4
5
6
7
8
9
10
11
12
.284 [7.21]
.200 [5.08]
.384[9.75]
.300 [7.62]
.484 [12.29] .400 [10.16]
.584 [14.82] .500 [12.70]
.684 [17.37] .600 [15.24]
.784 [19.91] .700 [17.78]
.884 [22.45] .800 [20.32]
.984 [24.99] .900 [22.86]
1.084 [27.53] 1.000 [25.40]
1.184 [30.07] 1.100 [27.94]
C = .120 [3.05]
D = .230 [5.84]
E = .185 [4.70]
Post Plating/Part Nos.
Plating A
Plating B Plating C
104344-1
104345-1
104346-1
104344-2
104345-2
104346-2
104344-3
104345-3
104346-3
104344-4
104345-4
104346-4
104344-5
104345-5
104346-5
104344-6
104345-6
104346-6
104344-7
104345-7
104346-7
104344-8
104345-8
104346-8
104344-9
104345-9
104346-9
1-104344-0 1-104345-0 1-104346-0
C = .125 [3.18]
D = .318 [8.08]
E = .200 [5.08]
Post Plating/Part Nos.
Plating A Plating B
Plating C
104426-1
104427-1
104428-1
104426-2
104427-2
104428-2
104426-3
104427-3
104428-3
104426-4
104427-4
104428-4
104426-5
104427-5
104428-5
104426-6
104427-6
104428-6
104426-7
104427-7
104428-7
104426-8
104427-8
104428-8
104426-9
104427-9
104428-9
1-104426-0 1-104427-0 1-104428-0
Notes: 1. Refer to the product drawing to determine the number and location of the board retention tails.
2. Other tail lengths are available, consult Tyco Electronics.
5
109
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Breakaway Retention Headers—Unshrouded, Single Row,
.100 [2.54] Centerline (Continued)
No. of
Pos.
13
14
15
16
17
18
19
20
21
22
23
24
25
26
30
35
40
Dimensions
A
B
1.284 [32.61]
1.384 [35.15]
1.484 [37.69]
1.584 [40.23]
1.684 [42.77]
1.784 [45.31]
1.884 [47.85]
1.984 [50.39]
2.084 [52.93]
2.184 [55.47]
2.284 [58.01]
2.384 [60.55]
2.484 [63.09]
2.584 [65.63]
2.984 [75.79]
3.484 [88.49]
3.984 [101.19]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
2.100 [53.34]
2.200 [55.88]
2.300 [58.42]
2.400 [60.96]
2.500 [63.50]
2.900 [73.66]
3.400 [86.36]
3.900 [99.06]
C = .120 [3.05]
D = .230 [5.84]
E = .185 [4.70]
Post Plating/Part Nos.
Plating A Plating B Plating C
1-104344-1 1-104345-1 1-104346-1
1-104344-2 1-104345-2 1-104346-2
1-104344-3 1-104345-3 1-104346-3
1-104344-4 1-104345-4 1-104346-4
1-104344-5 1-104345-5 1-104346-5
1-104344-6 1-104345-6 1-104346-6
1-104344-7 1-104345-7 1-104346-7
1-104344-8 1-104345-8 1-104346-8
1-104344-9 1-104345-9 1-104346-9
2-104344-0 2-104345-0 2-104346-0
2-104344-1 2-104345-1 2-104346-1
2-104344-2 2-104345-2 2-104346-2
2-104344-3 2-104345-3 2-104346-3
2-104344-4 2-104345-4 2-104346-4
2-104344-5 2-104345-5 2-104346-5
2-104344-6 2-104345-6 2-104346-6
2-104344-7 2-104345-7 2-104346-7
C = .125 [3.18]
D = .318 [8.08]
E = .200 [5.08]
Post Plating/Part Nos.
Plating A
Plating B
Plating C
1-104426-1 1-104427-1 1-104428-1
1-104426-2 1-104427-2 1-104428-2
1-104426-3 1-104427-3 1-104428-3
1-104426-4 1-104427-4 1-104428-4
1-104426-5 1-104427-5 1-104428-5
1-104426-6 1-104427-6 1-104428-6
1-104426-7 1-104427-7 1-104428-7
1-104426-8 1-104427-8 1-104428-8
1-104426-9 1-104427-9 1-104428-9
2-104426-0 2-104427-0 2-104428-0
2-104426-1 2-104427-1 2-104428-1
2-104426-2 2-104427-2 2-104428-2
2-104426-3 2-104427-3 2-104428-3
2-104426-4 2-104427-4 2-104428-4
2-104426-5 2-104427-5 2-104428-5
2-104426-6 2-104427-6 2-104428-6
2-104426-7 2-104427-7 2-104428-7
Notes: 1. Refer to the product drawing to determine the number and location of the board retention tails.
2. Other tail lengths are available, consult Tyco Electronics.
5
110
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Breakaway Retention Headers—Unshrouded, Single Row,
.100 [2.54] Centerline (Continued)
.025 [0.64] Square
Right-Angle Post (with
Board Retention Feature)
A
B
.100
Typ.
[2.54]
D
.090
[2.29]
E Ref.
(Contact
Area)
.138
[3.51]
.042
[1.07]
(2 Plc.)
Photo 98184-1
C
.140
[3.56]
Material and Finish:
Housing—Black thermoplastic,
94V-0 rated
Posts—Phosphor bronze, plated as
follows:
Plating A—Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin-lead on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating B—Duplex plated .000015
[0.00038] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin-lead on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating C—.000100-.000200
[0.00254-0.00508] tin-lead over
.000050 [0.00127] nickel on entire post
B
.100*
[2.54]
.040±.003 Dia. Typ.
[1.02±0.08]
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
Board Retention
using Swaged Tails
(All Header Sizes)
Performance Characteristics:
Insertion Force—12 lb. [53.4N]
maximum
Retention Force—.25 lb. [1.11N]
minimum
Related Product Data:
Mateable Connectors—Refer
to the Mating Post Selection Guide
(page 89)
Technical Documents (page 294):
See mating connector for applicable
product and application specifications.
No. of
Pos.
Dimensions
A
B
3
.284 [7.21]
.200 [5.08]
4
.384 [9.75]
.300 [7.62]
5
.484 [12.29] .400 [10.16]
6
.584 [14.83] .500 [12.70]
7
.684 [17.37] .600 [15.24]
8
.784 [19.91] .700 [17.78]
9
.884 [22.45] .800 [20.32]
10 .984 [24.99] .900 [22.86]
11 1.084 [27.53] 1.000 [25.40]
12 1.184 [30.07] 1.100 [27.94]
C = .120 [3.05]
C = .110 [2.79]
D = .230 [5.84]
D = .318 [8.08]
E = .185 [4.70]
E = .200 [5.08]
Post Plating/Part Nos.
Post Plating/Part Nos.
Plating A
Plating B
Plating C
Plating A
Plating B
Plating C
104347-1
104348-1
104349-1
104429-1
104430-1
104431-1
104347-2
104348-2
104349-2
104429-2
104430-2
104431-2
104347-3
104348-3
104349-3
104429-3
104430-3
104431-3
104347-4
104348-4
104349-4
104429-4
104430-4
104431-4
104347-5
104348-5
104349-5
104429-5
104430-5
104431-5
104347-6
104348-6
104349-6
104429-6
104430-6
104431-6
104347-7
104348-7
104349-7
104429-7
104430-7
104431-7
104347-8
104348-8
104349-8
104429-8
104430-8
104431-8
104347-9
104348-9
104349-9
104429-9
104430-9
104431-9
1-104347-0 1-104348-0 1-104349-0 1-104429-0 1-104430-0 1-104431-0
5
Notes: 1. Refer to the product drawing to determine the number and location of the board retention tails.
2. Other tail lengths are available, consult Tyco Electronics.
111
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Breakaway Retention Headers—Unshrouded, Single Row,
.100 [2.54] Centerline (Continued)
No. of
Pos.
13
14
15
16
17
18
19
20
21
22
23
24
25
26
30
35
40
Dimensions
A
B
1.284 [32.61]
1.384 [35.15]
1.484 [37.69]
1.584 [40.23]
1.684 [42.77]
1.784 [45.31]
1.884 [47.85]
1.984 [50.39]
2.084 [52.93]
2.184 [55.47]
2.284 [58.01]
2.384 [60.55]
2.484 [63.09]
2.584 [65.63]
2.984 [75.79]
3.484 [88.49]
3.984 [101.19]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
2.100 [53.34]
2.200 [55.88]
2.300 [58.42]
2.400 [60.96]
2.500 [63.50]
2.900 [73.66]
3.400 [86.36]
3.900 [99.06]
C = .120 [3.05]
D = .230 [5.84]
E = .185 [4.70]
Post Plating/Part Nos.
Plating A
Plating B
Plating C
1-104347-1 1-104348-1 1-104349-1
1-104347-2 1-104348-2 1-104349-2
1-104347-3 1-104348-3 1-104349-3
1-104347-4 1-104348-4 1-104349-4
1-104347-5 1-104348-5 1-104349-5
1-104347-6 1-104348-6 1-104349-6
1-104347-7 1-104348-7 1-104349-7
1-104347-8 1-104348-8 1-104349-8
1-104347-9 1-104348-9 1-104349-9
2-104347-0 2-104348-0 2-104349-0
2-104347-1 2-104348-1 2-104349-1
2-104347-2 2-104348-2 2-104349-2
2-104347-3 2-104348-3 2-104349-3
2-104347-4 2-104348-4 2-104349-4
2-104347-5 2-104348-5 2-104349-5
2-104347-6 2-104348-6 2-104349-6
2-104347-7 2-104348-7 2-104349-7
C = .110 [2.79]
D = .318 [8.08]
E = .200 [5.08]
Post Plating/Part Nos.
Plating A
Plating B
Plating C
1-104429-1 1-104430-1 1-104431-1
1-104429-2 1-104430-2 1-104431-2
1-104429-3 1-104430-3 1-104431-3
1-104429-4 1-104430-4 1-104431-4
1-104429-5 1-104430-5 1-104431-5
1-104429-6 1-104430-6 1-104431-6
1-104429-7 1-104430-7 1-104431-7
1-104429-8 1-104430-8 1-104431-8
1-104429-9 1-104430-9 1-104431-9
2-104429-0 2-104430-0 2-104431-0
2-104429-1 2-104430-1 2-104431-1
2-104429-2 2-104430-2 2-104431-2
2-104429-3 2-104430-3 2-104431-3
2-104429-4 2-104430-4 2-104431-4
2-104429-5 2-104430-5 2-104431-5
2-104429-6 2-104430-6 2-104431-6
2-104429-7 2-104430-7 2-104431-7
Notes: 1. Refer to the product drawing to determine the number and location of the board retention tails.
2. Other tail lengths are available, consult Tyco Electronics.
5
112
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Breakaway Retention Headers—Unshrouded, Double Row,
.100 x .100 [2.54 x 2.54] Centerline
.025 [0.64] Square
Straight Post (with Board
Retention Feature)
A
.100
[2.54]
B
.100
[2.54]
Typ.
E Ref.
(Contact Area)
D
.090
[2.29]
Photo 98185-7
.042
[1.07]
(2 Plc.)
.100*
[2.54]
Material and Finish:
Housing—Black thermoplastic,
94V-0 rated
Posts—Phosphor bronze, plated as
follows:
Plating A—Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin-lead on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating B—Duplex plated .000015
[0.00038] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin-lead on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating C—.000100-.000200
[0.00254-0.00508] tin-lead over
.000050 [0.00127] nickel on entire post
Performance Characteristics:
Insertion Force—12 lb. [53.4N]
maximum
Retention Force—.25 lb. [1.11N]
minimum
Related Product Data:
Mateable Connectors—Refer
to the Mating Post Selection Guide
(page 89)
Accessories:
Board Retention Feature
(See Note 1 Below.)
C
B
.192
[4.88]
.040±.003 Dia. Typ.
[1.02±0.08]
.100*
[2.54]
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
No. of
Pos.
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
34
40
50
60
80
Dimensions
A
B
.084 [2.13]
.184 [4.67]
.284 [7.21]
.384 [9.75]
.484 [12.29]
.584 [14.83]
.684 [17.37]
.784 [19.91]
.884 [22.45]
.984 [24.99]
1.084 [27.53]
1.184 [30.07]
1.284 [32.61]
1.384 [35.15]
1.484 [37.69]
1.684 [42.77]
1.984 [50.39]
2.484 [63.09]
2.984 [75.79]
3.984 [101.19]
—
.100 [2.54]
.200 [5.08]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.600 [40.64]
1.900 [48.26]
2.400 [60.96]
2.900 [73.66]
3.900 [99.06]
C = .120 [3.05]
D = .230 [5.84]
E = .185 [4.70]
Post Plating/Part Nos.
Plating A
Plating B
Plating C
104350-1
104351-1
104352-1
104350-2
104351-2
104352-2
104350-3
104351-3
104352-3
104350-4
104351-4
104352-4
104350-5
104351-5
104352-5
104350-6
104351-6
104352-6
104350-7
104351-7
104352-7
104350-8
104351-8
104352-8
104350-9
104351-9
104352-9
1-104350-0
1-104351-0
1-104352-0
1-104350-1
1-104351-1
1-104352-1
1-104350-2
1-104351-2
1-104352-2
1-104350-3
1-104351-3
1-104352-3
1-104350-4
1-104351-4
1-104352-4
1-104350-5
1-104351-5
1-104352-5
1-104350-6
1-104351-6
1-104352-6
1-104350-7
1-104351-7
1-104352-7
1-104350-8
1-104351-8
1-104352-8
1-104350-9
1-104351-9
1-104352-9
2-104350-0
2-104351-0
2-104352-0
C = .125 [3.18]
D = .318 [8.08]
E = .200 [5.08]
Post Plating/Part Nos.
Plating A
Plating B
Plating C
104432-1
104433-1
104434-1
104432-2
104433-2
104434-2
104432-3
104433-3
104434-3
104432-4
104433-4
104434-4
104432-5
104433-5
104434-5
104432-6
104433-6
104434-6
104432-7
104433-7
104434-7
104432-8
104433-8
104434-8
104432-9
104433-9
104434-9
1-104432-0
1-104433-0
1-104434-0
1-104432-1
1-104433-1
1-104434-1
1-104432-2
1-104433-2
1-104434-2
1-104432-3
1-104433-3
1-104434-3
1-104432-4
1-104433-4
1-104434-4
1-104432-5
1-104433-5
1-104434-5
1-104432-6
1-104433-6
1-104434-6
1-104432-7
1-104433-7
1-104434-7
1-104432-8
1-104433-8
1-104434-8
1-104432-9
1-104433-9
1-104434-9
2-104432-0
2-104433-0
2-104434-0
Notes: 1.Refer to the product drawing to determine the number and location of the board retention tails.
2.Other tail lengths are available, consult Tyco Electronics.
Barrier Insert—page 221
Technical Documents (page 294):
See mating connector for applicable
product and application specifications.
5
113
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Breakaway Retention Headers—Unshrouded, Double Row,
.100 x .100 [2.54 x 2.54] Centerline (Continued)
.025 [0.64] Square
Right-Angle Post (with
Board Retention Feature)
A
B
.042
[1.07]
(2 Plc.)
D
.100
[2.54]
Typ.
.090
[2.29]
.100
[2.54]
.238
[6.05]
E Ref.
(Contact
Area)
Photo 98184-4
.140
[3.56]
B
Material and Finish:
Housing—Black thermoplastic,
94V-0 rated
Posts—Phosphor bronze, plated as
follows:
Plating A—Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin-lead on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating B—Duplex plated .000015
[0.00038] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin-lead on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating C—.000100-.000200
[0.00254-0.00508] tin-lead over
.000050 [0.00127] nickel on entire post
Performance Characteristics:
Insertion Force—12 lb. [53.4N]
maximum
Retention Force—.25 lb. [1.11N]
minimum
Related Product Data:
Mateable Connectors—Refer
to the Mating Post Selection Guide
(page 89)
Technical Documents (page 294):
See mating connector for applicable
product and application specifications.
C
.100
[2.54]
.100*
[2.54]
.100*
[2.54]
.040±.003 Dia. Typ.
[1.02±0.08]
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
No. of
Pos.
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
34
40
50
60
80
Dimensions
A
B
.084 [2.13]
.184 [4.67]
.284 [7.21]
.384 [9.75]
.484 [12.29]
.584 [14.83]
.684 [17.37]
.784 [19.91]
.884 [22.45]
.984 [24.99]
1.084 [27.53]
1.184 [30.07]
1.284 [32.61]
1.384 [35.15]
1.484 [37.69]
1.684 [42.77]
1.984 [50.39]
2.484 [63.09]
2.984 [75.79]
3.984 [101.19]
—
.100 [2.54]
.200 [5.08]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.600 [40.64]
1.900 [48.26]
2.400 [60.96]
2.900 [73.66]
3.900 [99.06]
Board Retention
using Swaged Tails
(All Header Sizes)
C = .120 [3.05]
D = .230 [5.84]
E = .185 [4.70]
Post Plating/Part Nos.
Plating A
Plating B
Plating C
104353-1
104354-1
104355-1
104353-2
104354-2
104355-2
104353-3
104354-3
104355-3
104353-4
104354-4
104355-4
104353-5
104354-5
104355-5
104353-6
104354-6
104355-6
104353-7
104354-7
104355-7
104353-8
104354-8
104355-8
104353-9
104354-9
104355-9
1-104353-0
1-104354-0
1-104355-0
1-104353-1
1-104354-1
1-104355-1
1-104353-2
1-104354-2
1-104355-2
1-104353-3
1-104354-3
1-104355-3
1-104353-4
1-104354-4
1-104355-4
1-104353-5
1-104354-5
1-104355-5
1-104353-6
1-104354-6
1-104355-6
1-104353-7
1-104354-7
1-104355-7
1-104353-8
1-104354-8
1-104355-8
1-104353-9
1-104354-9
1-104355-9
2-104353-0
2-104354-0
2-104355-0
C = .110 [2.79]
D = .318 [8.08]
E = .200 [5.08]
Post Plating/Part Nos.
Plating A
Plating B
Plating C
104435-1
104436-1
104437-1
104435-2
104436-2
104437-2
104435-3
104436-3
104437-3
104435-4
104436-4
104437-4
104435-5
104436-5
104437-5
104435-6
104436-6
104437-6
104435-7
104436-7
104437-7
104435-8
104436-8
104437-8
104435-9
104436-9
104437-9
1-104435-0
1-104436-0
1-104437-0
1-104435-1
1-104436-1
1-104437-1
1-104435-2
1-104436-2
1-104437-2
1-104435-3
1-104436-3
1-104437-3
1-104435-4
1-104436-4
1-104437-4
1-104435-5
1-104436-5
1-104437-5
1-104435-6
1-104436-6
1-104437-6
1-104435-7
1-104436-7
1-104437-7
1-104435-8
1-104436-8
1-104437-8
1-104435-9
1-104436-9
1-104437-9
2-104435-0
2-104436-0
2-104437-0
Notes: 1. Refer to the product drawing to determine the number and location of the board retention tails.
2. Other tail lengths are available, consult Tyco Electronics.
5
114
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
AMPMODU Reeled Breakaway Headers
Features of Breakaway
Headers
Design and inventory
versatility - headers can
easily be made into any size
■ High Temperature
Compatible
■ Reduced part number base
■ Reduced inventory burden
■
Applications
Desktops & workstations
Set-top boxes
■ Televisions
■ Automotive instrument
panels & radios
■ Medical and test equipment
■
■
Benefits
Off the shelf availability
■ Various header length
capability using the same
reel
■ Reduction of inventory costs
■ Economy version of the
standard breakaway
headers
■
Photo 107806
Tyco Electronics now offers
AMPMODU reeled
breakaway headers, which
are used for board-to-board
interconnections, on a
continuous reel. The reeled
breakaway headers are an
economy version of the
standard breakaway
headers, and continue to
provide the same high
quality standards that Tyco
Electronics is known for in
the connector industry.
Reeled breakaway headers
provide the flexibility to be
able to cut the headers to
many different lengths,
while only having to stock
one part number. As a
result, the amount of part
numbers that need to be
purchased and stored can
be greatly reduced.
Reeled breakaway headers
can be purchased in single
and double rows with tinlead, 5 Au, 15 Au, and 30
Au duplex plating. The
lower applied cost also
offers .230” and .318”
mating lengths. (See
standard breakaway-toreeled header conversion
chart for vertical headers on
the reverse side of this
sheet)
Potential industries include:
computer peripherals,
telecommunications
equipment, consumer,
automotive, medical and
test equipment.
Tooling available from:
Robo-Pak, Inc.
814 Lakeshore Drive
East Bethel, MN 55902
A pin retention and pin
removal tooling option is
also available in addition to
cutting.
5
115
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
AMPMODU Reeled Breakaway Headers (Continued)
Single Row
3.900
[99.06]
.092
[2.34]
.046±.003
[1.17±0.08]
.025±.001
Typ.
[0.64±0.03]
.100
[2.54]
.185 [4.70]
(Contact Area)
.230(1)
[5.84]
.100±.003
[2.54±0.08]
.025±.002
[0.64±0.05]
.110±.015(1)
[2.79±0.38]
Double Row
3.900
[99.06]
.192
[4.88]
.100
[2.54]
.046±.003
[1.17±0.08]
.025±.001
Typ.
[0.64±0.03]
.100
[2.54]
.185 [4.70]
(Contact Area)
.230(1)
[5.84]
.100±.003
[2.54±0.08]
.025±.002
[0.64±0.05]
(1) See
.110±.015(1)
[2.79±0.38]
table for other mate and tail lengths.
Standard Breakaway-to-Reeled Header Conversion Chart (Vertical)
Double Row Headers
Single Row Headers
Plating
Options
5
Existing
Tyco Electronics P/N
Make From
Reeled P/N
Existing
Tyco Electronics P/N
Make From
Reeled P/N
Existing
Tyco Electronics P/N
Make From
Reeled P/N
Existing
Tyco Electronics P/N
Make From
Reeled P/N
Mate: .318
Tail: .125
103322
Mate: .318
Tail: .115
Mate: .230
Tail: .120
103328
Mate: .230
Tail: .110
Mate: .318
Tail: .125
103321
Mate: .318
Tail: .115
Mate: .230
Tail: .120
103327
Mate: .230
Tail: .110
Tin-Lead
146853-1
146250
102973
15 Au Duplex
146851-1
146254
103186
146861-1
146252
102977
30 Au Duplex
146859-1
146256
103240
146871-1
146253
146852-1
146274
102972
146860-1
146276
102976
146869-1
146257
146850-1
146278
103185
146858-1
146280
103239
146870-1
146277
146868-1
146281
* Note: Reeled Headers are a functional substitute for standard breakaways, however there are visual differences (i.e. housing appearance and bow due to reeling requirement).
116
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Breakaway Surface-Mount Compatible, High Temperature
Headers––Unshrouded
Product Facts
■
Variety of popular sizes
available
■
Substantial time/labor
savings—install all posts
at one time
■
Vertical and right-angle
versions available in
single- and double-row
configurations
■
Phosphor bronze posts
■
Gold duplex and tin
plated posts
■
Post lengths include .230
[5.84] and .318 [8.08] for
connector mating
■
Black, glass-filled
thermoplastic housings,
high temperature
compatible
■
Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
■
Certified by Canadian
Standards
Association,
File No. LR 7189
Photo 51183
Performance
Characteristics
The AMPMODU
interconnection system
provides interconnections
with a unique modular
concept.
Electrical:
Insulation Resistance—5,000
megohms minimum initial
Dielectric Withstanding Voltage—
750 V rms at sea level
Current—3 amperes maximum
per single contact (dependent upon
mating receptacle)
AMPMODU mating posts
are supplied typically as
header assemblies. They
are available in various
populations to meet the
interconnection and
packaging requirements
of your system.
Environmental:
Operating Temperature—
-65°C to +105°C
5
117
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Breakaway Surface-Mount Compatible, High Temperature Headers—Unshrouded,
Single-Row, .100 [2.54] Centerline with Special Stand-offs
.025 [0.64] Square
Straight Posts
Headers with Solder Tails
A
B
.025
[0.64]
Typ.
E Ref.
(Contact Area)
D
.090
[2.29]
C
Material and Finish:
Housing—Black thermoplastic, 94V-0
rated, high temperature compatible
Posts—Phosphor bronze, plated as
follows:
Plating A—Duplex plated .000030
[0.00076] gold on contact area, .000100.000200 [0.00254-0.00508] tin-lead on
solder tail, with entire post underplated
.000050 [0.00127] nickel
Plating B—Duplex plated .000015
[0.00038] gold on contact area, .000100.000200 [0.00254-0.00508] tin-lead on
solder tail, with entire post underplated
.000050 [0.00127] nickel
Plating C—.000100-.000200
[0.00254-0.00508] tin-lead over
.000050 [0.00127] nickel
.045
[1.14]
Typ.
B
.035±.003
Dia. Typ. .100*
[0.89±0.08]
[2.54]
(Plated)
Recommended Hole Size
Before Plating
.045±.001
Dia. Typ.
[1.14±0.02]
.090±.002
[2.29±0.05]
.030±.002
[0.76±0.05]
Recommended PC Board Mounting Pattern
(for .062 [1.57] thick PC board; .008 [.203] thick stencil)
*±.003 [±0.08] tolerances not to accumulate within one connector pattern.
Headers with Board Retention Tails
A
B
.025
[0.64]
Typ.
Performance Characteristics
(Board Retention Tails):
.090
[2.29]
C
(see
note 3)
Insertion Force—12 lb [53.4N] Max.
Retention Force—.25 lb [1.11N] Min.
.100*
.040±.003
Dia. Typ. [2.54]
[1.02±0.08]
(Plated)
Recommended Hole Size
Before Plating
.045±.001
Dia. Typ.
[1.14±0.02]
Mateable Connectors—Refer
to the Mating Post Selection Guide
(page 89)
Technical Documents (page 294):
See mating connector for applicable
product and application specifications.
5
.045
[1.14]
Typ.
B
Related Product Data:
.150±.002
[3.81±0.05]
.030±.002
[0.76±0.05]
Recommended PC Board Mounting Pattern
(for .062 [1.57] thick PC board; .008 [.203] thick stencil)
*±.003 [±0.08] tolerances not to accumulate within one connector pattern.
Dimensions
Header
Style
No. of
Pos.
A
B
With
Solder Tails
(See Notes
1 and 2.)
1
.084 [2.13]
—
40
3.984 [101.19]
3.900 [99.06]
3
.284 [7.21]
.200 [5.08]
40
3.984 [101.19]
3.900 [99.06]
With Board
Retention Tails
(See Notes
2 and 3.)
E Ref.
(Contact Area)
D
C = .090 [2.29]
D = .230 [5.84]
E = .185 [4.70]
Post Plating/Part Nos.
Plating A
Plating B
Plating C
C = .120 [3.05]
D = .230 [5.84]
E = .185 [4.70]
Post Plating/Part Nos.
Plating A
Plating B
Plating C
C = .125 [3.18]
D = .318 [8.08]
E = .200 [5.08]
Post Plating/Part Nos.
Plating A
Plating B
Plating C
146285-1
146284-1
146282-1
146281-1
146280-1
146278-1
146277-1
146276-1
146274-1
4-146285-0
4-146284-0
4-146282-0
4-146281-0
4-146280-0
4-146278-0
4-146277-0
4-146276-0
4-146274-0
146297-3
146296-3
146294-3
146293-3
146292-3
146290-3
146289-3
146288-3
146286-3
4-146297-0
4-146296-0
4-146294-0
4-146293-0
4-146292-0
4-146290-0
4-146289-0
4-146288-0
4-146286-0
Notes: 1. Headers without retention tails may be broken to the desired number of positions using Tool Kit No. 314818-1 (not shown).
Notes: 2. Headers are also available in sizes 2 thru 39 positions (with Solder Tails) and 4 thru 39 positions (with Board Retention Tails).
When ordering, add the prefix and/or suffix (dash) numbers to the base part number that corresponds with the desired size.
For example, the complete part number for an 8-position header with solder tails (C dimension .090 [2.29], post plating A) would
be 146285-8. The complete part number for a 26-position header with board retention tails (C dimension .120 [3.05], post
plating B) would be 2-146292-6. This part numbering system applies only to this page.
Notes: 3. For C dimensions .120 [3.05] and .125 [3.18], board retention using kinked tails are for headers 6 positions and smaller; headers
Notes: 3. 7 positions and larger use swaged tails. Headers with a C dimension of .090 [2.29] have swaged tails for all sizes.
118
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Breakaway Surface-Mount Compatible, High Temperature Headers—
Unshrouded, Single-Row, .100 [2.54] Centerline
.025 [0.64] Square
Right-Angle Posts
Headers with Solder Tails
A
B
D
.100
Typ.
[2.54]
.090
[2.29]
.138
[3.51]
C
Material and Finish:
Housing—Black thermoplastic, 94V-0
rated, high temperature compatible
Posts—Phosphor bronze, duplex
plated .000030 [0.00076] gold on
contact area, .000100-.000200
[0.00254-0.00508] matte tin-lead on
solder tail, with entire post underplated
.000050 [0.00127] nickel
.042
[1.07]
(2 Plc.)
.035±.003
Dia. Typ.
[0.89±0.08]
(Plated)
Recommended Hole Size
Before Plating
.045±.001
Dia. Typ.
[1.14±0.02]
Performance Characteristics
(Board Retention Tails):
Insertion Force—12 lb [53.4N] Max.
Retention Force—.25 lb [1.11N]
Min.
.045
[1.14]
Typ.
.100*
[2.54]
E Ref.
(Contact
Area)
.140
[3.56]
.090±.002
[2.29±0.05]
.030±.002
[0.76±0.05]
Recommended PC Board Mounting Pattern
(for .062 [1.57] thick PC board; .008 [.203] thick stencil)
*±.003 [±0.08] tolerances not to accumulate within one connector pattern.
Headers with Board Retention Tails
Related Product Data:
A
Mateable Connectors—Refer
to the Mating Post Selection Guide
(page 89)
B
D
.090
[2.29]
.100
Typ.
[2.54]
.138
[3.51]
Technical Documents (page 294):
C
See mating connector for applicable
product and application specifications.
E Ref.
(Contact
Area)
.042
[1.07]
(2 Plc.)
.040±.003
Dia. Typ.
[1.02±0.08]
(Plated)
Recommended Hole Size
Before Plating
.045±.001
Dia. Typ.
[1.14±0.02]
.045
[1.14]
Typ.
.100*
[2.54]
.150±.002
[3.81±0.05]
.030±.002
[0.76±0.05]
Recommended PC Board Mounting Pattern
(for .062 [1.57] thick PC board; .008 [.203] thick stencil)
*±.003 [±0.08] tolerances not to accumulate within one connector pattern.
C = .120 [3.05]
D = .230 [5.84]
E = .185 [4.70]
Part Nos.
C = .110 [2.79]
D = .318 [8.08]
E = .200 [5.08]
Part Nos.
—
4-146304-1
4-146305-1
3.984 [101.19]
3.900 [99.06]
4-146304-0
4-146305-0
1
.084 [2.13]
—
4-146306-1
4-146307-1
40
3.984 [101.19]
3.900 [99.06]
4-146306-0
4-146307-0
Dimensions
Header
Style
No. of
Pos.
A
B
With
Solder Tails
(See Notes
1 and 2.)
1
.084 [2.13]
40
With Board
Retention Tails
(See Note 2.)
.140
[3.56]
Board Retention
using Swaged Tails
(All Header Sizes)
5
Notes: 1. Headers without retention tails may be broken to the desired number of positions using Tool Kit No. 314818-1 (not shown).
Notes: 2. Headers are also available in sizes 2 thru 39 positions (with Solder Tails) and 4 thru 39 positions (with Board Retention Tails).
When ordering, add the prefix and/or suffix (dash) numbers to the base part number that corresponds with the number of
positions. For example, the complete part number for an 8-position header with solder tails (C dimension .120 [3.05)] would be
146304-8. The complete part number for a 26-position header with board retention tails (C dimension .120 [3.05]) would be
2-146306-6. This part numbering system applies only to this page.
119
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Breakaway Surface-Mount Compatible, High Temperature Headers–– Unshrouded,
Double-Row, .100 [2.54] Centerline with Special Stand-offs
.025 [0.64] Square
Straight Posts
Headers with Solder Tails
.192
[4.88]
A
B
.025
[0.64]
Typ.
E Ref.
(Contact Area)
D
.090
[2.29]
C
Material and Finish:
Housing—Black thermoplastic, 94V-0
rated, high temperature compatible
Posts—Phosphor bronze, plated as
follows:
Plating A—Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin-lead on solder tail, with entire post
underplated .000050 [0.00127] nickel
Plating B—Duplex plated .000015
[0.00038] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin-lead on solder tail, with entire post
underplated .000050 [0.00127] nickel
Plating C—.000100-.000200
[0.00254-0.00508] tin-lead over
.000050 [0.00127] nickel
.100
[2.54]
( CL of Hole Pattern)
.045
Ref.
[1.14]
.100*
[2.54]
.090±.002
[2.29±0.05]
.100
[2.54]
.110
[2.79]
( CL of Stencil Pattern)
.035±.003
Dia. Typ.
[0.89±0.08]
(Plated)
Recommended Hole Size
Before Plating
.045±.001
Dia. Typ.
[1.14±0.02]
.030±.002
[0.76±0.05]
Recommended PC Board Mounting Pattern
(for .062 [1.57] thick PC board; .008 [.203] thick stencil)
*±.003 [±0.08] tolerances not to accumulate within one connector pattern.
Headers with Board Retention Tails
A
B
.025
[0.64]
Typ.
Performance Characteristics
(Board Retention Tails):
E Ref.
(Contact Area)
D
.090
[2.29]
Insertion Force—12 lb [53.4N] Max.
Retention Force—.25 lb [1.11N] Min.
C
.100
[2.54]
C
( L of Hole Pattern)
Related Product Data:
Mateable Connectors—Refer
to the Mating Post Selection Guide
(page 89)
.075
Ref.
[1.91]
.100*
[2.54]
.170
[4.32]
( CL of Stencil Pattern)
.040±.003
Dia. Typ.
[1.02±0.08]
(Plated)
Recommended Hole Size
Before Plating
.045±.001
Dia. Typ.
[1.14±0.02]
Technical Documents (page 294):
See mating connector for applicable
product and application specifications.
.150±.002
[3.81±0.05]
.192
[4.88]
.030±.002
[0.76±0.05]
Recommended PC Board Mounting Pattern
(for .062 [1.57] thick PC board; .008 [.203] thick stencil)
*±.003 [±0.08] tolerances not to accumulate within one connector pattern.
5
Dimensions
Header
Style
No. of
Pos.
A
B
With
Solder Tails
(See Notes
1 and 2.)
2
.084 [2.13]
—
80
3.984 [101.19]
With Board
Retention Tails
(See Note 2.)
2
.084 [2.13]
80
3.984 [101.19]
3.900 [99.06]
—
3.900 [99.06]
C = .090 [2.29]
D = .230 [5.84]
E = .185 [4.70]
Post Plating/Part Nos.
Plating A Plating B
Plating C
146261-1
146260-1
146258-1
C = .120 [3.05]
D = .230 [5.84]
E = .185 [4.70]
Post Plating/Part Nos.
Plating A
Plating B
Plating C
146257-1
146256-1
146254-1
C = .125 [3.18]
D = .318 [8.08]
E = .200 [5.08]
Post Plating/Part Nos.
Plating A
Plating B
Plating C
146253-1
146252-1
146250-1
4-146261-0 4-146260-0 4-146258-0 4-146257-0 4-146256-0 4-146254-0 4-146253-0 4-146252-0 4-146250-0
146273-1
146272-1
146270-1
146269-1
146268-1
146266-1
146265-1
146264-1
146262-1
4-146273-0 4-146272-0 4-146270-0 4-146269-0 4-146268-0 4-146266-0 4-146265-0 4-146264-0 4-146262-0
Notes: 1. Headers without retention tails may be broken to the desired number of positions using Tool Kit No. 314818-1 (not shown).
Notes: 2. Headers are also available in sizes 4 thru 78 positions. When ordering, add the prefix and/or suffix (dash) numbers to the base
Notes: 2. part number that corresponds with the number of positions per row. For example, the complete part number for a 16-position
Notes: 2. header with solder tails (C dimension .090 [2.29], post plating A) would be 146261-8. The complete part number for a 40-position
Notes: 2. header with board retention tails (C dimension .120 [3.05], post plating B) would be 2-146268-0. This part numbering system applies
Notes: 2. only to this page.
120
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Breakaway Surface-Mount Compatible, High Temperature Headers—
Unshrouded, Double-Row, .100 [2.54] Centerline
.025 [0.64] Square
Right-Angle Posts
Headers with Solder Tails
A
.042
[1.07]
(2 Plc.)
B
D
.100
Typ.
[2.54]
.090
[2.29]
.238
[6.05]
.100
[2.54]
E Ref.
(Contact
Area)
Material and Finish:
Housing—Black thermoplastic, 94V-0
rated, high temperature compatible
Posts—Phosphor bronze, duplex plated
.000030 [0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
matte tin-lead on solder tail, with entire
post underplated .000050 [0.00127]
nickel
.045
[1.14]
Ref.
.100*
[2.54]
.140
[3.56]
.100
[2.54]
.110
[2.79]
( CL of Stencil Pattern)
.035±.003
Dia. Typ.
[0.89±0.08]
(Plated)
Recommended Hole Size
Before Plating
.045±.001
Dia. Typ.
[1.14±0.02]
.100
[2.54]
C
( L of Hole Pattern)
.090±.002
[2.29±0.05] .030±.002
[0.76±0.05]
Performance Characteristics
(Board Retention Tails):
C
Recommended PC Board Mounting Pattern
(for .062 [1.57] thick PC board; .008 [.203] thick stencil)
*±.003 [±0.08] tolerances not to accumulate within one connector pattern.
Insertion Force—12 lb [53.4N] Max.
Retention Force—.25 lb [1.11N] Min.
Headers with Board Retention Tails
Related Product Data:
Mateable Connectors—Refer
to the Mating Post Selection Guide
(page 89)
A
.042
[1.07]
(2 Plc.)
B
D
.090
[2.29]
Technical Documents (page 294):
.100
[2.54]
.238
[6.05]
See mating connector for applicable
product and application specifications.
.075
[1.91]
Typ.
.100*
[2.54]
.100
[2.54]
( CL of
Hole
Pattern)
.150±.002 .030±.002
[3.81±0.05] [0.76±0.05]
E Ref.
(Contact
Area)
C
.140
[3.56]
.170
[4.32]
( CL of Stencil Pattern)
.040±.003
Dia. Typ.
[1.02±0.08]
(Plated)
Recommended Hole Size
Before Plating
.045±.001
Dia. Typ.
[1.14±0.02]
.100
[2.54]
Recommended PC Board Mounting Pattern
(for .062 [1.57] thick PC board; .008 [.203] thick stencil)
*±.003 [±0.08] tolerances not to accumulate within one connector pattern.
C = .120 [3.05]
D = .230 [5.84]
E = .185 [4.70]
Part Nos.
Dimensions
Header
Style
No. of
Pos.
A
B
With
Solder Tails
(See Notes
1 and 2.)
2
.084 [2.13]
—
80
3.984 [101.19]
3.900 [99.06]
2
.084 [2.13]
—
80
3.984 [101.19]
3.900 [99.06]
With Board
Retention Tails
(See Note 2.)
C = .110 [2.79]
D = .318 [8.08]
E = .200 [5.08]
Part Nos.
146308-1
146309-1
4-146308-0
4-146309-0
146310-1
146311-1
4-146310-0
4-146311-0
Board Retention
using Swaged Tails
(All Header Sizes)
5
Notes: 1. Headers without retention tails may be broken to the desired number of positions using Tool Kit No. 314818-1 (not shown).
Notes: 2. Headers are also available in sizes 4 thru 78 positions. When ordering, add the prefix and/or suffix (dash) numbers to the base
Notes: 2. part number that corresponds with the number of positions per row. For example, the complete part number for a 16-position
Notes: 2. header with solder tails (C dimension .120 [3.05)] would be 146308-8. The complete part number for a 40-position header with
Notes: 2. board retention tails (C dimension .120 [3.05]) would be 2-146310-0. This part numbering system applies only to this page.
121
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Breakaway Surface Mount Headers, .100 x .100 [2.54 x 2.54] Centerline
Product Facts
■
Surface Mount Leads
■
Contact Material:
phosphor bronze
■
High temperature, black
thermoplastic housings,
94V-0 rated, capable of
withstanding IR or vaporphase reflow
■
Recognized under the
Component Program of
Underwriters
Laboratories Inc.
File No. E28476
■
Certified by Canadian
Standards
Association, File
No. LR 7189
■
Choice of gold duplex or tin
lead plated posts
■
Posts coplanar within .006
[0.15]
■
Tape and reel packaging
available in addition to
single tube packaging.
Contact Tyco Electronics.
■
Pick-and-place cap
available for vacuum
placement. Contact Tyco
Electronics.
Photo 97893
An extension of the
AMPMODU Breakaway
Header product family is
the surface mount, vertical
breakaway headers. The
AMPMODU surface-mount
breakaway headers
(Unshrouded) are available
in single- and double-row
vertical configurations with
mating lengths of .230
[5.84] and .320 [8.13].
Posts are offered with a
choice of either .000030
[.0007] gold duplex or tin
lead plating.
Current packaging is in a
single tube but tape and
reel is available for
automatic pick-and-place.
We also can provide a
pick-and-place cap for
vacuum placement if
required.
5
122
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Breakaway Surface-Mount Headers—Unshrouded
Single-Row, .100 [2.54] Centerline
A
.025 [0.64] Square
Straight Post
B
.100
Typ.
[2.54]
.092
[2.34]
Photo 98185-3
D Ref.
(Contact Area)
Material and Finish:
Housing—Black thermoplastic, 94V-0
rated, high temperature compatible
Posts—Phosphor bronze, plated as
follows:
Plating A—Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin-lead on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating B—.000100-.000200
[0.00254-0.00508] tin-lead over
.000050 [0.00127] nickel entire post
.025
[0.63]
C
.090
[2.29]
.063
[1.60]
.042
[1.07]
Typ.
.100
Typ.
[2.54]
.050±.003
[1.27±0.08]
.192
[4.88]
.050
[1.27]
.105
[2.67]
Related Product Data:
Mateable Receptacle—Refer
to Mating Post Selection Guide
(page 89)
.245
[6.22]
.140±.003
[3.56±0.08]
Recommended Etched Circuit Layout
(Using .008 [0.20] thick stencil)
Technical Documents (page 294):
See mating connector for applicable
product and application specifications.
Dimensions
A
B
No. of
Pos.
3
4
5
6
7
8
9
10
11
12
13
14
15
.284 [7.21]
.384 [9.75]
.484 [12.29]
.584 [14.83]
.684 [17.37]
.784 [19.91]
.884 [22.45]
.984 [24.99]
1.084 [27.53]
1.184 [30.07]
1.284 [32.61]
1.384 [35.15]
1.484 [37.69]
.200 [5.08]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
C = .230 [5.84]
D = .185 [4.70]
Post Plating/Part Nos.
Plating A
Plating B
146128-1
146132-1
146128-2
146132-2
146128-3
146132-3
146128-4
146132-4
146128-5
146132-5
146128-6
146132-6
146128-7
146132-7
146128-8
146132-8
146128-9
146132-9
1-146128-0
1-146132-0
1-146128-1
1-146132-1
1-146128-2
1-146132-2
1-146128-3
1-146132-3
C = .320 [8.13]
D = .200 [5.08]
Post Plating/Part Nos.
Plating A
Plating B
146129-1
146133-1
146129-2
146133-2
146129-3
146133-3
146129-4
146133-4
146129-5
146133-5
146129-6
146133-6
146129-7
146133-7
146129-8
146133-8
146129-9
146133-9
1-146129-0
1-146133-0
1-146129-1
1-146133-1
1-146129-2
1-146133-2
1-146129-3
1-146133-3
5
123
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Breakaway Surface-Mount Headers—Unshrouded
Double-Row, .100 x .100 [2.54 x 2.54] Centerline
A
.025 [0.64] Square
Straight Post
B
.100
Typ.
[2.54]
.192
[4.88]
Photo 98185-4
.100
[2.54]
D Ref.
(Contact Area)
Material and Finish:
Housing—Black thermoplastic, 94V-0
rated, high temperature compatible
Posts—Phosphor bronze, plated as
follows:
Plating A—Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin-lead on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating B—.000100-.000200
[0.00254-0.00508] tin-lead over
.000050 [0.00127] nickel entire post
.090
[2.29]
.025
[0.64]
.042
[1.07]
Typ.
.292
[7.42]
B
.100
Typ.
[2.54]
.345
[8.76]
Related Product Data:
C
.063
[1.60]
.050
[1.27]
.140±.003
[3.56±0.08]
.205
[5.21]
Mateable Receptacles—Refer
to Mating Post Selection Guide
(page 89)
.065
[1.65]
.050±.003
[1.27±0.08]
Recommended Etched Circuit Layout
(Using .008 [0.20] thick stensil)
5
Dimensions
No. of
Pos.
A
B
4
6
8
10
12
14
16
18
20
22
24
26
28
30
.184 [4.67]
.284 [7.21]
.384 [9.75]
.484 [12.29]
.584 [14.83]
.684 [17.37]
.784 [19.91]
.884 [22.45]
.984 [24.99]
1.084 [27.53]
1.184 [30.07]
1.284 [32.61]
1.384 [35.15]
1.484 [37.69]
.100 [2.54]
.200 [5.08]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
C = .230 [5.84]
D = .185 [4.70]
Post Plating/Part Nos.
Plating A
Plating B
146130-1
146134-1
146130-2
146134-2
146130-3
146134-3
146130-4
146134-4
146130-5
146134-5
146130-6
146134-6
146130-7
146134-7
146130-8
146134-8
146130-9
146134-9
1-146130-0
1-146134-0
1-146130-1
1-146134-1
1-146130-2
1-146134-2
1-146130-3
1-146134-3
1-146130-4
1-146134-4
C = .320 [8.13]
D = .200 [5.08]
Post Plating/Part Nos.
Plating A
Plating B
146131-1
146135-1
146131-2
146135-2
146131-3
146135-3
146131-4
146135-4
146131-5
146135-5
146131-6
146135-6
146131-7
146135-7
146131-8
146135-8
146131-9
146135-9
1-146131-0
1-146135-0
1-146131-1
1-146135-1
1-146131-2
1-146135-2
1-146131-3
1-146135-3
1-146131-4
1-146135-4
124
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Unshrouded Stacking Headers—Breakaway
.100 x .100 [2.54 x 2.54] Centerline
Product Facts
■
Available in single and
double row
■
Parallel PC board stacking
with numerous stack
heights available
■
Drawn wire posts allow
4 side mateability
■
May eliminate the need for
additional board spacers
■
Can be used in conjunction with bottom entry
receptacles
■
Gold or tin plated
■
Up to 1.430 [36.32] overall
post length
■
Access sample request form
Instruction Sheet Number
408-4236 on the Tyco
Electronics FAX Information
System
■
Retention and surface
mount features available
upon request
■
Other header sizes can be
made upon request
■
Tape and reel packaging
available. Contact Tyco
Electronics.
■
Pick-and-place cap
available for vacuum
placement. Contact Tyco
Electronics.
Photo 101135
5
125
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Breakaway Unshrouded Stacking Headers,
Single-Row, .100 [2.54] Centerline
.025 [0.64] Square
Straight Posts
.092
[2.34]
.046±.003
[1.17±0.08]
Header Size
No. of Pos. x .100 [2.54]
.025±.001
Typ.
[0.64±0.03]
Photo 98184-7
B
A
Material and Finish:
Housing—Black thermoplastic,
94V-0 rated
Posts—Copper alloy, plated as follows:
Plating—As noted in chart
Tin—.000100-.000200 [.003-.005] inch
tin-lead over .000050 [.0012] inch nickel
entire post
15Au—.000015 [.0003] inch gold over
.000050 [.0012] inch nickel entire post
.042±.008
[1.07±0.20]
4 Places
D
.100±.003 Typ.
[2.54±0.08]
Tolerance Non-Cumlative
.035±.003 Dia. Typ.
[0.89±0.08]
Related Product Data:
Mateable Receptacles—Refer
to the Mating Post Selection Guide
(page 89)
Technical Documents (page 294):
See mating connector for applicable
product and and application
specifications.
Retention and surface mount
features available upon request.
Other header sizes can be made
upon request.
5
C
.090±.003
[2.29±0.08]
*Note: Headers are available in sizes
1 thru 40. When ordering, add the
prefix and/or suffix (dash) numbers to
the base part number that corresponds
with the number of positions per row.
For example, the complete part
number for an 8-position header is
146455-8. The complete part number
for a 16-position of the same series
would be 1-146455-6.
Recommended PC Board Hole Layout
Base
Number
(see note)
146455
146456
146457
146758
146459
146460
146461
146462
146463
146464
146465
146466
146467
146468
146469
146470
146471
146472
146473
146474
146475
146476
146477
146478
146479
146480
146481
146482
A
Stack
Height
.200 [5.08]
.250 [6.35]
.250 [6.35]
.300 [7.62]
.400 [10.16]
.450 [11.43]
.500 [12.70]
.300 [7.62]
.600 [15.24]
.400 [10.16]
.700 [17.78]
.500 [12.70]
.270 [6.86]
.800 [20.32]
.600 [15.24]
.370 [9.39]
.900 [22.86]
.700 [17.78]
.470 [11.39]
1.000 [25.40]
.800 [20.32]
.570 [14.47]
1.100 [27.94]
.900 [22.68]
.670 [17.01]
1.200 [30.48]
1.000 [25.40]
.770 [19.55]
B
Tail
Length
.130 [3.30]
.080 [2.03]
.114 [2.89]
.123 [3.12]
.107 [2.71]
.057 [1.45]
.129 [3.27]
.109 [2.77]
.107 [2.71]
.087 [2.20]
.120 [3.05]
.100 [2.54]
.330 [8.38]
.120 [3.05]
.100 [2.54]
.330 [8.38]
.120 [3.05]
.100 [2.54]
.330 [8.38]
.120 [3.05]
.100 [2.54]
.330 [8.38]
.120 [3.05]
.100 [2.54]
.330 [8.38]
.120 [3.05]
.100 [2.54]
.330 [8.38]
C
Post
Length
.440 [11.17]
.440 [11.17]
.474 [12.03]
.533 [13.53]
.617 [15.67]
.617 [15.67]
.739 [18.77]
.739 [18.77]
.817 [20.75]
.817 [20.75]
.930 [23.62]
.930 [23.62]
.930 [23.62]
1.030 [26.16]
1.030 [26.16]
1.030 [26.16]
1.130 [28.70]
1.130 [28.70]
1.130 [28.70]
1.230 [31.24]
1.230 [31.24]
1.230 [31.24]
1.330 [33.78]
1.330 [33.78]
1.330 [33.78]
1.430 [36.32]
1.430 [36.32]
1.430 [36.32]
D
Mating
Length
.110 [2.79]
.110 [2.79]
.110 [2.79]
.110 [2.79]
.110 [2.79]
.110 [2.79]
.110 [2.79]
.330 [8.38]
.110 [2.79]
.330 [8.38]
.110 [2.79]
.330 [8.38]
.330 [8.38]
.110 [2.79]
.330 [8.38]
.330 [8.38]
.110 [2.79]
.330 [8.38]
.330 [8.38]
.110 [2.79]
.330 [8.38]
.330 [8.38]
.110 [2.79]
.330 [8.38]
.330 [8.38]
.110 [2.79]
.330 [8.38]
.330 [8.38]
B End
Plating
D End
Plating
TIN
TIN
TIN
TIN
TIN
TIN
TIN
TIN
TIN
TIN
TIN
TIN
15 AU
TIN
TIN
15 AU
TIN
TIN
15 AU
TIN
TIN
15 AU
TIN
TIN
15 AU
TIN
TIN
15 AU
TIN
TIN
TIN
TIN
TIN
TIN
TIN
15 AU
TIN
15 AU
TIN
15 AU
15 AU
TIN
15 AU
15 AU
TIN
15 AU
15 AU
TIN
15 AU
15 AU
TIN
15 AU
15 AU
TIN
15 AU
15 AU
126
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Breakaway Unshrouded Stacking Headers,
Double-Row, .100 x .100 [2.54 x 2.54] Centerline
.025 [0.64] Square
Straight Posts
.192
[4.88]
.046±.003
[1.17±0.08]
Header Size
No. of Pos. x .100 [2.54]
.025±.001
Typ.
[0.64±0.03]
Photo 98184-6
.100
[2.54]
B
C
A
.090±.003
[2.29±0.08]
Material and Finish:
Housing—Black thermoplastic,
94V-0 rated
Posts—Copper alloy, plated as follows:
Plating—As noted in chart
Tin—.000100-.000200 [.003-.005] inch
tin-lead over .000050 [.0012] inch nickel
entire post
15Au—.000015 [.0003] inch gold over
.000050 [.0012] inch nickel entire post
D
.042±.008
[1.07±0.20]
4 Places
.100±.003 Typ.
[2.54±0.08]
Tolerance Non-Cumlative
.100±.003
[2.54±0.08]
Related Product Data:
Mateable Connectors—Refer
to the Mating Post Selection Guide
(page 89)
Technical Documents (page 294):
See mating connector for applicable
product and and application
specifications.
Retention and surface mount
features available upon request.
Other header sizes can be made
upon request.
*Note: Headers are available in sizes
2 thru 80. When ordering, add the
prefix and/or suffix (dash) numbers to
the base part number that corresponds
with the number of positions per row.
For example, the complete part
number for a 16-position header is
146283-8. The complete part number
for a 32-position of the same series
would be 1-146283-6.
.035±.003 Dia. Typ.
[0.89±0.08]
Recommended PC Board Hole Layout
Base
Number
(see note)
146483
146484
146485
146486
146487
146488
146489
146490
146491
146492
146493
146494
146495
146496
146497
146498
146499
146500
146501
146502
146503
146504
146505
146506
146507
146508
146509
146510
A
Stack
Height
.200 [5.08]
.250 [6.35]
.250 [6.35]
.300 [7.62]
.400 [10.16]
.450 [11.43]
.500 [12.70]
.300 [7.62]
.600 [15.24]
.400 [10.16]
.700 [17.78]
.500 [12.70]
.270 [6.86]
.800 [20.32]
.600 [15.24]
.370 [9.39]
.900 [22.86]
.700 [17.78]
.470 [11.93]
1.000 [25.40]
.800 [20.32]
.570 [14.74]
1.100 [27.94]
.900 [22.68]
.670 [17.01]
1.200 [30.48]
1.000 [25.40]
.770 [19.55]
B
Tail
Length
.130 [3.30]
.080 [2.03]
.114 [2.89]
.123 [3.12]
.107 [2.71]
.057 [1.45]
.129 [3.27]
.109 [2.77]
.107 [2.71]
.087 [2.20]
.120 [3.05]
.100 [2.54]
.330 [8.38]
.120 [3.05]
.100 [2.54]
.330 [8.38]
.120 [3.05]
.100 [2.54]
.330 [8.38]
.120 [3.05]
.100 [2.54]
.330 [8.38]
.120 [3.05]
.100 [2.54]
.330 [8.38]
.120 [3.05]
.100 [2.54]
.330 [8.38]
C
Post
Length
.440 [11.17]
.440 [11.17]
.474 [12.03]
.533 [13.53]
.617 [15.67]
.617 [15.67]
.739 [18.77]
.739 [18.77]
.817 [20.75]
.817 [20.75]
.930 [23.62]
.930 [23.62]
.930 [23.62]
1.030 [26.16]
1.030 [26.16]
1.030 [26.16]
1.130 [28.70]
1.130 [28.70]
1.130 [28.70]
1.230 [31.24]
1.230 [31.24]
1.230 [31.24]
1.330 [33.78]
1.330 [33.78]
1.330 [33.78]
1.430 [36.32]
1.430 [36.32]
1.430 [36.32]
D
Mating
Length
.110 [2.79]
.110 [2.79]
.110 [2.79]
.110 [2.79]
.110 [2.79]
.110 [2.79]
.110 [2.79]
.330 [8.38]
.110 [2.79]
.330 [8.38]
.110 [2.79]
.330 [8.38]
.330 [8.38]
.110 [2.79]
.330 [8.38]
.330 [8.38]
.110 [2.79]
.330 [8.38]
.330 [8.38]
.110 [2.79]
.330 [8.38]
.330 [8.38]
.110 [2.79]
.330 [8.38]
.330 [8.38]
.110 [2.79]
.330 [8.38]
.330 [8.38]
B End
Plating
D End
Plating
TIN
TIN
TIN
TIN
TIN
TIN
TIN
TIN
TIN
TIN
TIN
TIN
15 AU
TIN
TIN
15 AU
TIN
TIN
15 AU
TIN
TIN
15 AU
TIN
TIN
15 AU
TIN
TIN
15 AU
TIN
TIN
TIN
TIN
TIN
TIN
TIN
15 AU
TIN
15 AU
TIN
15 AU
15 AU
TIN
15 AU
15 AU
TIN
15 AU
15 AU
TIN
15 AU
15 AU
TIN
15 AU
15 AU
TIN
15 AU
15 AU
5
127
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Standard Profile Headers—Shrouded
Product Facts
■
Available in several styles—
right-angle with three- and
four-sided pin protection,
and straight post with pin
protection and mounting ears
■
Post retention feature
available
■
Can be used for feed-to and
feed-thru applications
■
Housings are black
thermoplastic, flame
retardant 94V-0 rated
■
Contacts are copper alloy
■
Available in gold duplex,
gold over nickel and tinlead over nickel platings
■
Headers with .066 [1.68]
and .150 [3.81] end dimen sions are available in select
sizes up to 60 positions
■
Can be select loaded,
consult Tyco Electronics.
■
Recognized under the
Component Program of
Underwriters
Laboratories Inc.
File No. E28476
■
Certified by Canadian
Standards
Association,
File No. LR 7189
Performance
Characteristics
Electrical:
Insulation Resistance—5,000
megohms minimum initial
Dielectric Withstanding Voltage—
750 RMS at sea level
Environmental:
Operating Temperature—
-65°C to +105°C (black thermoplastic
housings)
Current—3 amperes maximum
per contact
5
128
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Standard Profile Headers—Shrouded,
Single-Row, .100 [2.54] Centerline
.025 [0.64] Square
Straight Post (with Standoffs)
.549
[13.94]
.200
Ref.
[5.08]
(Contact Area)
Material and Finish:
Housing—Black thermoplastic,
94V-0 rated
Posts—Copper alloy, plated as follows:
Plating A—Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin-lead on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating B—Duplex plated .000015
[0.00038] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin-lead on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating C—.000100-.000200
[0.00254-0.00508] tin-lead over
.000050 [0.00127] nickel on entire post
A
.110
[2.79]
Typ.
.134
[3.40]
.219
[5.56]
C
.100
Typ.
[2.54]
.214
[5.44]
.013
[0.33]
(Standoffs)
.070
[1.78]
Typ.
.040
[1.02]
Typ.
B
.240
[6.10]
.330
[8.38]
.130
[3.30]
C
.100*
[2.54]
Typ.
Related Product Data:
Mateable Connectors:
AMPMODU Wire-Applied
Receptacles—page 232
AMPMODU MTE Receptacles—
pages 245, 246, 251
Technical Documents (page 294):
.035±.003
Dia. Typ.
[0.89±0.08]
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
See mating connector for applicable
product and application specifications.
No. of
Pos.
3
4
5
6
7
8
9
10
A
.420 [10.67]
.520 [13.21]
.620 [15.75]
.720 [18.29]
.820 [20.83]
.920 [23.37]
1.020 [25.91]
1.120 [28.45]
Dimensions
B
.340 [8.64]
.440 [11.18]
.540 [13.72]
.640 [16.26]
.740 [18.80]
.840 [21.34]
.940 [23.88]
1.040 [26.42]
C
.200 [5.08]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
Plating A
103414-1
103414-2
103414-3
103414-4
103414-5
103414-6
103414-7
103414-8
Post Plating/Part Nos.
Plating B
3-102202-4
102202-1
102202-2
102202-3
102202-4
102202-5
102202-6
102202-7
Plating C
103080-1
103080-2
103080-3
103080-4
103080-5
103080-6
103080-7
103080-8
5
129
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Standard Profile Headers—Shrouded,Single-Row,
.100 [2.54] Centerline (Continued)
No. of
Pos.
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
A
1.220 [30.99]
1.320 [33.53]
1.420 [36.07]
1.520 [38.61]
1.620 [41.15]
1.720 [43.69]
1.820 [46.23]
1.920 [48.77]
2.020 [51.31]
2.120 [53.85]
2.220 [56.39]
2.320 [58.93]
2.420 [61.47]
2.520 [64.01]
2.620 [66.55]
Dimensions
B
1.140 [28.96]
1.240 [31.50]
1.340 [34.04]
1.440 [36.58]
1.540 [39.12]
1.640 [41.66]
1.740 [44.20]
1.840 [46.74]
1.940 [49.28]
2.040 [51.82]
2.140 [54.36]
2.240 [56.90]
2.340 [59.44]
2.440 [61.98]
2.540 [64.52]
C
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
2.100 [53.34]
2.200 [55.88]
2.300 [58.42]
2.400 [60.96]
Post Plating/Part Nos.
Plating A
Plating B
Plating C
103414-9
102202-8
103080-9
1-103414-0
102202-9
1-103080-0
1-103414-1
1-102202-0
1-103080-1
1-103414-2
1-102202-1
1-103080-2
1-103414-3
1-102202-2
1-103080-3
1-103414-4
1-102202-3
1-103080-4
1-103414-5
1-102202-4
1-103080-5
1-103414-6
1-102202-5
1-103080-6
1-103414-7
1-102202-6
1-103080-7
1-103414-8
1-102202-7
1-103080-8
1-103414-9
1-102202-8
1-103080-9
2-103414-0
1-102202-9
2-103080-0
2-103414-1
2-102202-0
2-103080-1
2-103414-2
2-102202-1
2-103080-2
2-103414-3
2-102202-2
2-103080-3
5
130
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Standard Profile Headers—Shrouded,
Single-Row, .100 [2.54] Centers (Continued)
.025 [0.64] Square
Right-Angle Post
(with Standoffs)
.549
[13.94]
A
.134
[3.40]
Material and Finish:
Housing—Black thermoplastic,
94V-0 rated
Posts—Copper alloy, plated as follows:
Plating A—Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin-lead on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating B—Duplex plated .000015
[0.00038] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin-lead on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating C—.000100-.000200
[0.00254-0.00508] tin-lead over
.000050 [0.00127] nickel on entire post
C
.200
Ref.
[5.08]
(Contact Area)
.100
Typ.
[2.54]
.240
[6.10]
.219
[5.56]
.110
[2.79]
.214
[5.44]
.070
[1.78]
Typ.
.330
[8.38]
.151
[3.84]
.013
[0.33]
(Standoffs)
B
.040
[1.02]
Typ.
C
.035±.003 Dia.
[0.89±0.08]
.100*
[2.54]
Typ.
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
Related Product Data:
Mateable Connectors:
AMPMODU Wire-Applied
Receptacles—page 232
AMPMODU MTE Receptacles—
pages 245, 246, 251
Technical Documents (page 294):
See mating connector for applicable
product and application specifications.
No. of
Pos.
3
4
5
6
7
8
9
10
A
.420 [10.67]
.520 [13.21]
.620 [15.75]
.720 [18.29]
.820 [20.83]
.920 [23.37]
1.020 [25.91]
1.120 [28.45]
Dimensions
B
.340 [8.64]
.440 [11.18]
.540 [13.72]
.640 [16.26]
.740 [18.80]
.840 [21.34]
.940 [23.88]
1.040 [26.42]
C
.200 [5.08]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
Plating A
103361-1
103361-2
103361-3
103361-4
103361-5
103361-6
103361-7
103361-8
Post Plating/Part Nos.
Plating B
3-102203-4
102203-1
102203-2
102203-3
102203-4
102203-5
102203-6
102203-7
Plating C
102523-1
102523-2
102523-3
102523-4
102523-5
102523-6
102523-7
102523-8
5
131
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Standard Profile Headers—Shrouded,
Single-Row, .100 [2.54] Centers (Continued)
No. of
Pos.
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
A
1.220 [30.99]
1.320 [33.53]
1.420 [36.07]
1.520 [38.61]
1.620 [41.15]
1.720 [43.69]
1.820 [46.23]
1.920 [48.77]
2.020 [51.31]
2.120 [53.85]
2.220 [56.39]
2.320 [58.93]
2.420 [61.47]
2.520 [64.01]
2.620 [66.55]
Dimensions
B
1.140 [28.96]
1.240 [31.50]
1.340 [34.04]
1.440 [36.58]
1.540 [39.12]
1.640 [41.66]
1.740 [44.20]
1.840 [46.74]
1.940 [49.28]
2.040 [51.82]
2.140 [54.36]
2.240 [56.90]
2.340 [59.44]
2.440 [61.98]
2.540 [64.52]
C
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
2.100 [53.34]
2.200 [55.88]
2.300 [58.42]
2.400 [60.96]
Plating A
103361-9
1-103361-0
1-103361-1
1-103361-2
1-103361-3
1-103361-4
1-103361-5
1-103361-6
1-103361-7
1-103361-8
1-103361-9
2-103361-0
2-103361-1
2-103361-2
2-103361-3
Post Plating/Part Nos.
Plating B
Plating C
102203-8
102523-9
102203-9
1-102523-0
1-102203-0
1-102523-1
1-102203-1
1-102523-2
1-102203-2
1-102523-3
1-102203-3
1-102523-4
1-102203-4
1-102523-5
1-102203-5
1-102523-6
1-102203-6
1-102523-7
1-102203-7
1-102523-8
1-102203-8
1-102523-9
1-102203-9
2-102523-0
2-102203-0
2-102523-1
2-102203-1
2-102523-2
2-102203-2
2-102523-3
5
132
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Standard Profile Headers—Shrouded, with .066 [1.68]
End Dimension, Double-Row, .100 x .100 [2.54 x 2.54] Centerline
.025 [0.64] Square
Straight Post (with
Detent Windows)
.040
[1.02]
(3 Plc.)
B
.066
[1.68]
(2 Plc.)
C
.100
Typ.
[2.54]
.200
Ref.
[5.08]
(Contact Area)
.100
[2.54]
.400
[10.16]
.125
[3.18]
.280
[7.11]
.090
[2.29]
(2 Plc.)
A
.090
[2.29]
.240
[6.10]
Typ.
E
Material and Finish:
.318
[8.08]
D
Housing—Black thermoplastic,
94V-0 rated
Posts—Copper alloy, plated as follows:
Plating A—Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin-lead on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating B—Duplex plated .000015
[0.00038] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin-lead on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating C—.000100-.000200
[0.00254-0.00508] tin-lead over
.000050 [0.00127] nickel on entire post
.440
[11.18]
.080
[2.03]
C
.100*
Typ.
[2.54]
.100*
[2.54]
.035±.003 Dia. Typ.
[0.89±0.08]
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
Related Product Data:
Mateable Connectors:
AMPMODU Board Mount
Receptacles—pages 193, 196, 197
AMPMODU Wire-Applied
Receptacles—pages 233-236
AMPMODU MTE Receptacles—
pages 245, 246, 251
AMPMODU MT Receptacles—
pages 275, 276
No. of
Pos.
A
B
Dimensions
C
D
E
Post Plating/Part Nos.
Plating A
Plating B
Plating C
Accessories:
6
.412 [10.46]
.332 [8.43]
.200 [5.08]
.106 [2.69]
—
103168-1
102618-1
3-87589-6
Barrier Insert—page 221
8
.512 [13.00]
.432 [10.97]
.300 [7.62]
.106 [2.69]
—
103168-2
102618-2
3-87589-5
10
.612 [15.54]
.532 [13.51]
.400 [10.16]
.206 [5.23]
—
103168-3
102618-3
87589-1
12
.712 [18.08]
.632 [16.05]
.500 [12.70]
.206 [5.23]
—
103168-4
102618-4
87589-2
14
.812 [20.62]
.732 [18.59]
.600 [15.24]
.306 [7.77]
—
103168-5
102618-5
87589-3
16
.912 [23.16]
.832 [21.13]
.700 [17.78]
.306 [7.77]
—
103168-6
102618-6
87589-4
18
1.012 [25.70
.932 [23.67]
.800 [20.32]
.406 [10.31]
—
103168-7
102618-7
87589-5
20
1.112 [28.24] 1.032 [26.21]
.900 [22.86]
.106 [2.69]
.806 [20.47]
103168-8
102618-8
87589-6
22
1.212 [30.78] 1.132 [28.75] 1.000 [25.40]
.106 [2.69]
.906 [23.01]
103168-9
102618-9
87589-7
24
1.312 [33.32] 1.232 [31.29] 1.100 [27.94]
.106 [2.69]
1.006 [25.55]
1-103168-0
1-102618-0
87589-8
26
1.412 [35.86] 1.332 [33.83] 1.200 [30.48]
.106 [2.69]
1.106 [28.09]
1-103168-1
1-102618-1
87589-9
28
1.512 [38.40] 1.432 [36.37] 1.300 [33.02]
.106 [2.69]
1.206 [30.63]
1-103168-2
1-102618-2
1-87589-0
30
1.612 [40.94] 1.532 [38.91] 1.400 [35.56]
.106 [2.69]
1.306 [33.17]
1-103168-3
1-102618-3
1-87589-1
Technical Documents (page 294):
See mating connector for applicable
product and application specifications.
5
133
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Standard Profile Headers—Shrouded, with .066 [1.68] End Dimension,
Double-Row, .100 x .100 [2.54 x 2.54] Centerline (Continued)
No. of
Positions
A
B
Dimensions
C
D
E
Post Plating/Part Nos.
Plating A
Plating B
Plating C
32
1.712 [43.48] 1.632 [41.45] 1.500 [38.10] .106 [2.69] 1.406 [35.71]
1-103168-4
1-102618-4
1-87589-2
34
1.812 [46.02] 1.732 [43.99] 1.600 [40.64] .106 [2.69] 1.506 [38.25]
1-103168-5
1-102618-5
1-87589-3
36
1.912 [48.56] 1.832 [46.53] 1.700 [43.18] .106 [2.69] 1.606 [40.79]
1-103168-6
1-102618-6
1-87589-4
38
2.012 [51.10] 1.932 [49.07] 1.800 [45.72] .106 [2.69] 1.706 [43.33]
1-103168-7
1-102618-7
1-87589-5
40
2.112 [53.64] 2.032 [51.61] 1.900 [48.26] .106 [2.69] 1.806 [45.87]
1-103168-8
1-102618-8
1-87589-6
42
2.212 [56.18] 2.132 [54.15] 2.000 [50.80] .106 [2.69] 1.906 [48.41]
1-103168-9
1-102618-9
1-87589-7
44
2.312 [58.72] 2.232 [56.69] 2.100 [53.34] .106 [2.69] 2.006 [50.95]
2-103168-0
2-102618-0
1-87589-8
46
2.412 [61.26] 2.332 [59.23] 2.200 [55.88] .106 [2.69] 2.106 [53.49]
2-103168-1
2-102618-1
1-87589-9
48
2.512 [63.80] 2.432 [61.77] 2.300 [58.42] .106 [2.69] 2.206 [56.03]
2-103168-2
2-102618-2
2-87589-0
50
2.612 [66.34] 2.532 [64.31] 2.400 [60.96] .106 [2.69] 2.306 [58.57]
2-103168-3
2-102618-3
2-87589-1
52
2.712 [68.88] 2.632 [66.85] 2.500 [63.50] .106 [2.69] 2.406 [61.11]
2-103168-4
2-102618-4
2-87589-2
54
2.812 [71.42] 2.732 [69.39] 2.600 [66.04] .106 [2.69] 2.506 [63.65]
2-103168-5
2-102618-5
2-87589-3
56
2.912 [73.96] 2.832 [71.93] 2.700 [68.58] .106 [2.69] 2.606 [66.19]
2-103168-6
2-102618-6
2-87589-4
58
3.012 [76.50] 2.932 [74.47] 2.800 [71.12] .106 [2.69] 2.706 [68.73]
2-103168-7
2-102618-7
2-87589-5
60
3.112 [79.04] 3.032 [77.01] 2.900 [73.66] .106 [2.69] 2.806 [71.27]
2-103168-8
2-102618-8
2-87589-6
62
3.212 [81.58] 3.132 [79.55] 3.000 [76.20] .106 [2.69] 2.906 [73.81]
2-103168-9
2-102618-9
2-87589-7
64
3.312 [84.12] 3.232 [82.09] 3.100 [78.74] .106 [2.69] 3.006 [76.35]
3-103168-0
3-102618-0
2-87589-8
66
3.412 [86.66] 3.332 [84.63] 3.200 [81.28] .106 [2.69] 3.106 [78.89]
3-103168-1
3-102618-1
2-87589-9
68
3.512 [89.20] 3.432 [87.17] 3.300 [83.82] .106 [2.69] 3.206 [81.43]
3-103168-2
3-102618-2
3-87589-0
70
3.612 [91.74] 3.532 [89.71] 3.400 [86.36] .106 [2.69] 3.306 [83.97]
3-103168-3
3-102618-3
3-87589-1
72
3.712 [94.28] 3.632 [92.25] 3.500 [88.90] .106 [2.69] 3.406 [86.51]
3-103168-4
3-102618-4
3-87589-2
74
3.812 [96.82] 3.732 [94.79] 3.600 [91.44] .106 [2.69] 3.506 [89.05]
3-103168-5
3-102618-5
3-87589-3
5
134
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Standard Profile Headers—Shrouded, with .150 [3.81]
End Dimension, Double-Row, .100 x .100 [2.54 x 2.54] Centerline
.025 [0.64] Square
Straight Post (with
Detent Windows)
.040
[1.02]
(3 Plc.)
B
.150
[3.81]
(2 Plc.)
C
.100
Typ.
[2.54]
.200
Ref.
[5.08]
(Contact Area)
.100
[2.54]
.400
[10.16]
.125
[3.18]
.280
[7.11]
.090
[2.29]
(2 Plc.)
A
.318
[8.08]
.090
[2.29]
.240
Typ.
[6.10]
E
D
Material and Finish:
.080
[2.03]
Housing—Black thermoplastic,
94V-0 rated
Posts—Copper alloy, plated as follows:
Plating A—Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin-lead on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating B—Duplex plated .000015
[0.00038] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin-lead on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating C—.000100-.000200
[0.00254-0.00508] tin-lead over
.000050 [0.00127] nickel on entire post
.440
[11.18]
C
.100*
Typ.
[2.54]
.100*
[2.54]
.035±.003 Dia. Typ.
[0.89±0.08]
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
Related Product Data:
Mateable Connectors:
AMPMODU MTE Receptacles—
pages 249, 250, 252 (used with
coupling shroud on page 258)
AMPMODU Wire-Applied
Receptacles—pages 233-236
No. of
Pos.
A
B
Dimensions
C
D
E
Post Plating/Part Nos.
Plating A
Plating B
Plating C
6
.580 [14.73]
.500 [12.70]
.200 [5.08]
.190 [4.83]
—
103169-1
102619-1
3-87587-4
Accessories:
8
.680 [17.27]
.600 [15.24]
.300 [7.62]
.190 [4.83]
—
103169-2
102619-2
3-87587-3
Barrier Insert—page 221
10
.780 [19.81]
.700 [17.78]
.400 [10.16] .290 [7.37]
—
103169-3
102619-3
87587-1
12
.880 [22.35]
.800 [20.32]
.500 [12.70] .290 [7.37]
—
103169-4
102619-4
87587-2
14
.980 [24.89]
.900 [22.86]
.600 [15.24] .390 [9.91]
—
103169-5
102619-5
87587-3
16
1.080 [27.43]
1.000 [25.40]
.700 [17.78] .390 [9.91]
—
103169-6
102619-6
87587-4
18
1.180 [29.97]
1.100 [27.94]
.800 [20.32] .490 [12.45]
—
103169-7
102619-7
87587-5
20
1.280 [32.51]
1.200 [30.48]
.900 [22.86] .190 [4.83]
.890 [22.61]
103169-8
102619-8
87587-6
22
1.380 [35.05]
1.300 [33.02]
1.000 [25.40] .190 [4.83]
.990 [25.15]
103169-9
102619-9
87587-7
24
1.480 [37.59]
1.400 [35.56]
1.100 [27.94] .190 [4.83]
1.090 [27.69]
1-103169-0
1-102619-0
87587-8
26
1.580 [40.13]
1.500 [38.10]
1.200 [30.48] .190 [4.83]
1.190 [30.23]
1-103169-1
1-102619-1
87587-9
28
1.680 [42.67]
1.600 [40.64]
1.300 [33.02] .190 [4.83]
1.290 [32.77]
1-103169-2
1-102619-2
1-87587-0
30
1.780 [45.21]
1.700 [43.18]
1.400 [35.56] .190 [4.83]
1.390 [35.31]
1-103169-3
1-102619-3
1-87587-1
Technical Documents (page 294):
See mating connector for applicable
product and application specifications.
5
135
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Standard Profile Headers—Shrouded, with .150 [3.81] End Dimension,
Double-Row, .100 x .100 [2.54 x 2.54] Centerline (Continued)
No. of
Pos.
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
62
64
66
68
70
72
A
1.880 [47.75]
1.980 [50.29]
2.080 [52.83]
2.180 [55.37]
2.280 [57.91]
2.380 [60.45]
2.480 [62.99]
2.580 [65.53]
2.680 [68.07]
2.780 [70.61]
2.880 [73.15]
2.980 [75.69]
3.080 [78.23]
3.180 [80.77]
3.280 [83.31]
3.380 [85.85]
3.480 [88.39]
3.580 [90.93]
3.680 [93.47]
3.780 [96.01]
3.880 [98.55]
B
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
2.100 [53.34]
2.200 [55.88]
2.300 [58.42]
2.400 [60.96]
2.500 [63.50]
2.600 [66.04]
2.700 [68.58]
2.800 [71.12]
2.900 [73.66]
3.000 [76.20]
3.100 [78.74]
3.200 [81.28]
3.300 [83.82]
3.400 [86.36]
3.500 [88.90]
3.600 [91.44]
3.700 [93.98]
3.800 [96.52]
Dimensions
C
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
2.100 [53.34]
2.200 [55.88]
2.300 [58.42]
2.400 [60.96]
2.500 [63.50]
2.600 [66.04]
2.700 [68.58]
2.800 [71.12]
2.900 [73.66]
3.000 [76.20]
3.100 [78.74]
3.200 [81.28]
3.300 [83.82]
3.400 [86.36]
3.500 [88.90]
D
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
E
1.490 [37.85]
1.590 [40.39]
1.690 [42.93]
1.790 [45.47]
1.890 [48.01]
1.990 [50.55]
2.090 [53.09]
2.190 [55.63]
2.290 [58.17]
2.390 [60.71]
2.490 [63.25]
2.590 [65.79]
2.690 [68.33]
2.790 [70.87]
2.890 [73.41]
2.990 [75.95]
3.090 [78.49]
3.190 [81.03]
3.290 [83.57]
3.390 [86.11]
3.490 [88.65]
Post Plating/Part Nos.
Plating A
Plating B
Plating C
1-103169-4
1-102619-4
1-87587-2
1-103169-5
1-102619-5
1-87587-3
1-103169-6
1-102619-6
1-87587-4
1-103169-7
1-102619-7
1-87587-5
1-103169-8
1-102619-8
1-87587-6
1-103169-9
1-102619-9
1-87587-7
2-103169-0
2-102619-0
1-87587-8
2-103169-1
2-102619-1
1-87587-9
2-103169-2
2-102619-2
2-87587-0
2-103169-3
2-102619-3
2-87587-1
2-103169-4
2-102619-4
2-87587-2
2-103169-5
2-102619-5
2-87587-3
2-103169-6
2-102619-6
2-87587-4
2-103169-7
2-102619-7
2-87587-5
2-103169-8
2-102619-8
2-87587-6
2-103169-9
2-102619-9
2-87587-7
3-103169-0
3-102619-0
2-87587-8
3-103169-1
3-102619-1
2-87587-9
3-103169-2
3-102619-2
3-87587-0
3-103169-3
3-102619-3
3-87587-1
3-103169-4
3-102619-4
3-87587-2
5
136
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Standard Profile Headers—Shrouded, with .150 [3.81] End Dimension,
Double-Row, .100 x .100 [2.54 x 2.54] Centerline (Continued)
.025 [0.64] Square
Straight Post (with
Plastic Holddowns)
.150
[3.81]
(2 Plc.)
.040
[1.02]
(3 Plc.)
B
C
.200
Ref.
[5.08]
(Contact Area)
.318
[8.08]
.100
Typ.
[2.54]
.125
[3.18]
.100
[2.54]
.400
[10.16]
.015
[.020]
0.38
[0.51]
Photo 98185-8
[ ]
.280
[7.11]
.090
[2.29]
(2 Plc.)
.050
(2 Plc.)
[1.27]
A
.090
[2.29]
Material and Finish:
Housing—Black thermoplastic,
94V-0 rated
Posts—Copper alloy, duplex plated
.000015 [0.00038] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin-lead on solder area, with entire post
underplated .000050 [0.00127] nickel
.440
[11.18]
C
.140
[3.56]
(2 Plc.)
Related Product Data:
Mateable Connectors:
AMPMODU MTE Receptacles—
pages 249, 250, 252 (used with
coupling shroud on page 258)
AMPMODU Wire-Applied
Receptacles—pages 233-236
.100*
[2.54]
.100*
Typ.
[2.54]
.040±.003 Dia. Typ.
Dia. Typ.
.093+.004
[1.02±0.08]
-.000
.093
2.36+0.10
-.000
Recommended PC Board Hole Layout
2.36
[
]
(for .055 [1.40] min. thick PC board)
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
Accessories:
Barrier Insert—page 221
Technical Documents (page 294):
See mating connector for applicable
product and application specifications.
No. of
Pos.
6
10
12
14
16
18
A
.580 [14.73]
.780 [19.81]
.880 [22.35]
.980 [24.89]
1.080 [27.43]
1.180 [29.97]
Dimensions
B
.500 [12.70]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
C
.200 [5.08]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
Part Nos.
Plating A
104317-1
104317-2
104317-3
104317-4
1-104317-6
104317-5
5
137
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Standard Profile Headers—Shrouded, with .150 [3.81] End Dimension,
Double-Row, .100 x .100 [2.54 x 2.54] Centerline (Continued)
No. of
Pos.
20
22
24
26
30
32
34
36
40
42
48
50
A
1.280 [32.51]
1.380 [35.05]
1.480 [37.59]
1.580 [40.13]
1.780 [45.21]
1.880 [47.75]
1.980 [50.29]
2.080 [52.83]
2.280 [57.91]
2.380 [60.45]
2.680 [68.07]
2.780 [70.61]
Dimensions
B
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
2.200 [55.88]
2.300 [58.42]
2.600 [66.04]
2.700 [68.58]
C
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.900 [48.26]
2.000 [50.80]
2.300 [58.42]
2.400 [60.96]
Part Nos.
Plating A
104317-6
104317-7
104317-8
104317-9
1-104317-0
1-104317-1
1-104317-8
1-104317-7
1-104317-2
1-104317-5
1-104317-3
1-104317-4
5
138
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Standard Profile Headers—Shrouded, with .066 [1.68] End Dimension,
Double-Row, .100 x .100 [2.54 x 2.54] Centerline
.025 [0.64] Square
Right-Angle Post
(with Detent Windows)
.040
[1.02]
(3 Plc.)
B
.066
[1.68]
(2 Plc.)
C
.100
Typ.
[2.54]
.200
Ref.
[5.08]
(Contact Area)
.318
[8.08]
.100
[2.54]
.280
[7.11]
.400
[10.16]
.013
[0.33]
(Standoffs)
.135
[3.43]
.090
[2.29]
(2 Plc.)
A
.157
[3.99]
Material and Finish:
Housing—Black thermoplastic,
94V-0 rated
Posts—Copper alloy, plated as follows:
Plating A—Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin-lead on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating B—Duplex plated .000015
[0.00038] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin-lead on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating C—.000100-.000200
[0.00254-0.00508] tin-lead over
.000050 [0.00127] nickel on entire post
.100
[2.54]
.240
[6.10]
Typ.
E
D
.639
[16.23]
.489
[12.42]
.080
[2.03]
C
.100*
Typ.
[2.54]
Related Product Data:
Mateable Connectors:
AMPMODU Board Mount
Receptacles—pages 193, 196, 197
AMPMODU Wire-Applied
Receptacles—pages 233-236
AMPMODU MTE Receptacles—
pages 245, 246, 251
AMPMODU MT Receptacles—
pages 275, 276
Technical Documents (page 294):
See mating connector for applicable
product and application specifications.
.100*
[2.54]
.035±.003 Dia. Typ.
[0.89±0.08]
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
No. of
Pos.
A
B
Dimensions
C
6
8
10
12
14
16
18
20
22
24
26
28
30
.412 [10.46]
.512 [13.00]
.612 [15.54]
.712 [18.08]
.812 [20.62]
.912 [23.16]
1.012 [25.70]
1.112 [28.24]
1.212 [30.78]
1.312 [33.32]
1.412 [35.86]
1.512 [38.40]
1.612 [40.94]
.332 [8.43]
.432 [10.97]
.532 [13.51]
.632 [16.05]
.732 [18.59]
.832 [21.13]
.932 [23.67]
1.032 [26.21]
1.132 [28.75]
1.232 [31.29]
1.332 [33.83]
1.432 [36.37]
1.532 [38.91]
.200 [5.08]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
D
.106 [2.69]
.106 [2.69]
.206 [5.23]
.206 [5.23]
.306 [7.77]
.306 [7.77]
.406 [10.31]
.106 [2.69]
.106 [2.69]
.106 [2.69]
.106 [2.69]
.106 [2.69]
.106 [2.69]
E
—
—
—
—
—
—
—
.806 [20.47]
.906 [23.01]
1.006 [25.55]
1.106 [28.09]
1.206 [30.63]
1.306 [33.17]
Post Plating/Part Nos.
Plating A
Plating B
Plating C
103166-1
103166-2
103166-3
103166-4
103166-5
103166-6
103166-7
103166-8
103166-9
1-103166-0
1-103166-1
1-103166-2
1-103166-3
102617-1
102617-2
102617-3
102617-4
102617-5
102617-6
102617-7
102617-8
102617-9
1-102617-0
1-102617-1
1-102617-2
1-102617-3
3-87579-5
87579-1
87579-2
87579-3
87579-4
87579-5
87579-6
87579-7
87579-8
87579-9
1-87579-0
1-87579-1
1-87579-2
5
139
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Standard Profile Headers—Shrouded, with .066 [1.68] End Dimension,
Double-Row, .100 x .100 [2.54 x 2.54] Centerline (Continued)
No. of
Pos.
A
B
Dimensions
C
D
E
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
62
64
66
68
70
72
74
1.712 [43.48]
1.812 [46.02]
1.912 [48.56]
2.012 [51.10]
2.112 [53.64]
2.212 [56.18]
2.312 [58.72]
2.412 [61.26]
2.512 [63.80]
2.612 [66.34]
2.712 [68.88]
2.812 [71.42]
2.912 [73.96]
3.012 [76.50]
3.112 [79.04]
3.212 [81.58]
3.312 [84.12]
3.412 [86.66]
3.512 [89.20]
3.612 [91.74]
3.712 [94.28]
3.812 [96.82]
1.632 [41.45]
1.732 [43.99]
1.832 [46.53]
1.932 [49.07]
2.032 [51.61]
2.132 [54.15]
2.232 [56.69]
2.332 [59.23]
2.432 [61.77]
2.532 [64.31]
2.632 [66.85]
2.732 [69.39]
2.832 [71.93]
2.932 [74.47]
3.032 [77.01]
3.132 [79.55]
3.232 [82.09]
3.332 [84.63]
3.432 [87.17]
3.532 [89.71]
3.632 [92.25]
3.732 [94.79]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
2.100 [53.34]
2.200 [55.88]
2.300 [58.42]
2.400 [60.96]
2.500 [63.50]
2.600 [66.04]
2.700 [68.58]
2.800 [71.12]
2.900 [73.66]
3.000 [76.20]
3.100 [78.74]
3.200 [81.28]
3.300 [83.82]
3.400 [86.36]
3.500 [88.90]
3.600 [91.44]
.106 [2.69]
.106 [2.69]
.106 [2.69]
.106 [2.69]
.106 [2.69]
.106 [2.69]
.106 [2.69]
.106 [2.69]
.106 [2.69]
.106 [2.69]
.106 [2.69]
.106 [2.69]
.106 [2.69]
.106 [2.69]
.106 [2.69]
.106 [2.69]
.106 [2.69]
.106 [2.69]
.106 [2.69]
.106 [2.69]
.106 [2.69]
.106 [2.69]
1.406 [35.71]
1.506 [38.25]
1.606 [40.79]
1.706 [43.33]
1.806 [45.87]
1.906 [48.41]
2.006 [50.95]
2.106 [53.49]
2.206 [56.03]
2.306 [58.57]
2.406 [61.11]
2.506 [63.65]
2.606 [66.19]
2.706 [68.73]
2.806 [71.27]
2.906 [73.81]
3.006 [76.35]
3.106 [78.89]
3.206 [81.43]
3.306 [83.97]
3.406 [86.51]
3.506 [89.05]
Post Plating/Part Nos.
Plating A
Plating B
Plating C
1-103166-4
1-103166-5
1-103166-6
1-103166-7
1-103166-8
1-103166-9
2-103166-0
2-103166-1
2-103166-2
2-103166-3
2-103166-4
2-103166-5
2-103166-6
2-103166-7
2-103166-8
2-103166-9
3-103166-0
3-103166-1
3-103166-2
3-103166-3
3-103166-4
3-103166-5
1-102617-4
1-102617-5
1-102617-6
1-102617-7
1-102617-8
1-102617-9
2-102617-0
2-102617-1
2-102617-2
2-102617-3
2-102617-4
2-102617-5
2-102617-6
2-102617-7
2-102617-8
2-102617-9
3-102617-0
3-102617-1
3-102617-2
3-102617-3
3-102617-4
3-102617-5
1-87579-3
1-87579-4
1-87579-5
1-87579-6
1-87579-7
1-87579-8
1-87579-9
2-87579-0
2-87579-1
2-87579-2
2-87579-3
2-87579-4
2-87579-5
2-87579-6
2-87579-7
2-87579-8
2-87579-9
3-87579-0
3-87579-1
3-87579-2
3-87579-3
3-87579-4
5
140
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Standard Profile Headers—Shrouded, with .150 [3.81] End Dimension,
Double-Row, .100 x .100 [2.54 x 2.54] Centerline
.025 [0.64] Square
Right-Angle Post
(with Detent Windows)
.040
[1.02]
(3 Plc.)
B
.150
[3.81]
(2 Plc.)
C
.200
Ref.
[5.08]
(Contact
Area)
.100
[2.54]
.100
Typ.
[2.54]
.400
[10.16]
.318
[8.08]
.280
[7.11]
.013
[0.33]
(Standoffs)
.289
[7.34]
.135
[3.43]
.090
[2.29]
(2 Plc.)
A
Material and Finish:
Housing—Black thermoplastic,
94V-0 rated
Posts—Copper alloy, plated as follows:
Plating A—Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin-lead on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating B—Duplex plated .000015
[0.00038] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin-lead on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating C—.000100-.000200
[0.00254-0.00508] tin-lead over
.000050 [0.00127] nickel on entire post
.157
[3.99]
.240
[6.10]
Typ.
E
D
.639
[16.23]
.489
[12.42]
.100
[2.54]
.080
[2.03]
C
.100*
Typ.
[2.54]
Related Product Data:
Mateable Connectors:
AMPMODU MTE Receptacles—
pages 249, 250, 252 (used with
coupling shroud on page 258)
AMPMODU Wire-Applied
Receptacles—pages 233-236
.100*
[2.54]
.035±.003
Dia. Typ.
[0.89±0.08]
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
Technical Documents (page 294):
See mating connector for applicable
product and application specifications.
No. of
Pos.
A
B
Dimensions
C
8
10
12
14
16
18
20
22
24
26
28
30
.680 [17.27]
.780 [19.81]
.880 [22.35]
.980 [24.89]
1.080 [27.43]
1.180 [29.97]
1.280 [32.51]
1.380 [35.05]
1.480 [37.59]
1.580 [40.13]
1.680 [42.67]
1.780 [45.21]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
D
.190 [4.83]
.290 [7.37]
.290 [7.37]
.390 [9.91]
.390 [9.91]
.490 [12.45]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
E
—
—
—
—
—
—
.890 [22.61]
.990 [25.15]
1.090 [27.69]
1.190 [30.23]
1.290 [32.77]
1.390 [35.31]
Post Plating/Part Nos.
Plating A
Plating B
Plating C
103167-1
103167-2
103167-3
103167-4
103167-5
103167-6
103167-7
103167-8
103167-9
1-103167-0
1-103167-1
1-103167-2
102570-2
102570-3
102570-4
102570-5
102570-6
102570-7
102570-8
102570-9
1-102570-0
1-102570-1
1-102570-2
1-102570-3
87577-1
87577-2
87577-3
87577-4
87577-5
87577-6
87577-7
87577-8
87577-9
1-87577-0
1-87577-1
1-87577-2
5
141
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Standard Profile Headers—Shrouded, with .150 [3.81] End Dimension,
Double-Row, .100 x .100 [2.54 x 2.54] Centerline (Continued)
No. of
Pos.
A
B
Dimensions
C
D
E
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
62
64
66
68
70
72
1.880 [47.75]
1.980 [50.29]
2.080 [52.83]
2.180 [55.37]
2.280 [57.91]
2.380 [60.45]
2.480 [62.99]
2.580 [65.53]
2.680 [68.07]
2.780 [70.61]
2.880 [73.15]
2.980 [75.69]
3.080 [78.23]
3.180 [80.77]
3.280 [83.31]
3.380 [85.85]
3.480 [88.39]
3.580 [90.93]
3.680 [93.47]
3.780 [96.01]
3.880 [98.55]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
2.100 [53.34]
2.200 [55.88]
2.300 [58.42]
2.400 [60.96]
2.500 [63.50]
2.600 [66.04]
2.700 [68.58]
2.800 [71.12]
2.900 [73.66]
3.000 [76.20]
3.100 [78.74]
3.200 [81.28]
3.300 [83.82]
3.400 [86.36]
3.500 [88.90]
3.600 [91.44]
3.700 [93.98]
3.800 [96.52]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
2.100 [53.34]
2.200 [55.88]
2.300 [58.42]
2.400 [60.96]
2.500 [63.50]
2.600 [66.04]
2.700 [68.58]
2.800 [71.12]
2.900 [73.66]
3.000 [76.20]
3.100 [78.74]
3.200 [81.28]
3.300 [83.82]
3.400 [86.36]
3.500 [88.90]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
1.490 [37.85]
1.590 [40.39]
1.690 [42.93]
1.790 [45.47]
1.890 [48.01]
1.990 [50.55]
2.090 [53.09]
2.190 [55.63]
2.290 [58.17]
2.390 [60.71]
2.490 [63.25]
2.590 [65.79]
2.690 [68.33]
2.790 [70.87]
2.890 [73.41]
2.990 [75.95]
3.090 [78.49]
3.190 [81.03]
3.290 [83.57]
3.390 [86.11]
3.490 [88.65]
Post Plating/Part Nos.
Plating A
Plating B
Plating C
1-103167-3
1-103167-4
1-103167-5
1-103167-6
1-103167-7
1-103167-8
1-103167-9
2-103167-0
2-103167-1
2-103167-2
2-103167-3
2-103167-4
2-103167-5
2-103167-6
2-103167-7
2-103167-8
2-103167-9
3-103167-0
3-103167-1
3-103167-2
3-103167-3
1-102570-4
1-102570-5
1-102570-6
1-102570-7
102570-1
1-102570-8
1-102570-9
2-102570-0
2-102570-1
2-102570-2
2-102570-3
2-102570-4
2-102570-5
2-102570-6
2-102570-7
2-102570-8
2-102570-9
3-102570-0
3-102570-1
3-102570-2
3-102570-3
1-87577-3
1-87577-4
1-87577-5
1-87577-6
1-87577-7
1-87577-8
1-87577-9
2-87577-0
2-87577-1
2-87577-2
2-87577-3
2-87577-4
2-87577-5
2-87577-6
2-87577-7
2-87577-8
2-87577-9
3-87577-0
3-87577-1
3-87577-2
3-87577-3
5
142
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Standard Profile Headers—Shrouded, with .066 [1.68] End Dimension,
Double-Row, .100 x .100 [2.54 x 2.54] Centerline
.025 [0.64] Square
Right-Angle Post
(with Pin Protection
on 3 Sides)
.639
[16.23]
.489
[12.42]
.200
Ref.
[5.08]
(Contact Area)
.040
[1.02]
(2 Plc.)
Material and Finish:
Housing—Black thermoplastic,
94V-0 rated
Posts—Copper alloy, plated as follows:
Plating A—Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin-lead on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating B—Duplex plated .000015
[0.00038] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin-lead on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating C—.000100-.000200
[0.00254-0.00508] tin-lead over
.000050 [0.00127] nickel on entire post
B
.066
[1.68]
(2 Plc.)
.100
Typ.
[2.54]
See mating connector for applicable
product and application specifications.
.289
[7.34]
.125
[3.18]
.100
[2.54]
.090
[2.29]
(2 Plc.)
A
.157
[3.99]
.100
[2.54]
C
.100*
[2.54]
.100*
[2.54]
Technical Documents (page 294):
.318
[8.08]
.361
.280
[9.17]
[7.11]
Related Product Data:
Mateable Connectors:
AMPMODU Board Mount
Receptacles—pages 193, 196, 197
AMPMODU Wire-Applied
Receptacles—pages 233, 234
AMPMODU MTE Receptacles—
pages 245, 246, 251
AMPMODU MT Receptacles—
pages 275, 276
.100
[2.54]
C
.035±.003
Dia. Typ.
[0.89±0.08]
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
No. of
Pos.
6
8
10
12
14
16
18
20
24
26
30
34
40
50
52
54
60
A
.412 [10.46]
.512 [13.00]
.612 [15.54]
.712 [18.08]
.812 [20.62]
.912 [23.16]
1.012 [25.70]
1.112 [28.24]
1.312 [33.32]
1.412 [35.86]
1.612 [40.94]
1.812 [46.02]
2.112 [53.64]
2.612 [66.34]
2.712 [68.88]
2.812 [71.42]
3.112 [79.04]
Dimensions
B
.332 [8.43]
.432 [10.97]
.532 [13.51]
.632 [16.05]
.732 [18.59]
.832 [21.13]
.932 [23.67]
1.032 [26.21]
1.232 [31.29]
1.332 [33.83]
1.532 [38.91]
1.732 [43.99]
2.032 [51.61]
2.532 [64.31]
2.632 [66.85]
2.732 [69.36]
3.032 [77.01]
C
.200 [5.08]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.100 [27.94]
1.200 [30.48]
1.400 [35.56]
1.600 [40.64]
1.900 [48.26]
2.400 [60.96]
2.500 [63.50]
2.600 [66.04]
2.900 [73.66]
Plating A
103164-1
103164-2
103164-3
103164-4
103164-5
103164-6
103164-7
103164-8
1-103164-0
1-103164-1
1-103164-3
1-103164-5
1-103164-8
2-103164-3
2-103164-4
—
2-103164-8
Post Plating/Part Nos.
Plating B
102055-2
102055-3
102055-4
102055-5
102055-6
102055-7
102055-8
102055-1
1-102055-0
—
1-102055-3
1-102055-5
1-102055-8
2-102055-3
—
2-102055-5
2-102055-8
Plating C
3-87572-5
87572-1
87572-2
87572-3
87572-4
87572-5
87572-6
87572-7
—
1-87572-0
—
1-87572-4
1-87572-7
2-87572-2
—
—
2-87572-7
5
143
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Standard Profile Headers—Shrouded, with .150 [3.81] End Dimension,
Double-Row, .100 x .100 [2.54 x 2.54] Centerline
.025 [0.64] Square
Right-Angle Post
(with Pin Protection
on 3 Sides)
.639
[16.23]
.489
[12.42]
Material and Finish:
Housing—Black thermoplastic,
94V-0 rated
Posts—Copper alloy, plated as follows:
Plating A—Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin-lead on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating B—Duplex plated .000015
[0.00038] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin-lead on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating C—.000100-.000200
[0.00254-0.00508] tin-lead over
.000050 [0.00127] nickel on entire post
.040
[1.02]
(2 Plc.)
.200
Ref.
[5.08]
(Contact Area)
B
C
.150
[3.81]
(2 Plc.)
.361
[9.17]
.100
Typ.
[2.54]
.361
[9.17]
.318
[8.08]
.289
[7.34]
.280
[7.11]
.100
[2.54]
A
.090
[2.29]
(2 Plc.)
.157
[3.99]
.100
[2.54]
Related Product Data:
.100*
[2.54]
Typ.
Mateable Connectors:
AMPMODU Wire-Applied
Receptacles—pages 233, 234
.125
[3.18]
C
.100*
[2.54]
.035±.003
Dia. Typ.
[0.89±0.08]
Technical Documents (page 294):
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
See mating connector for applicable
product and application specifications.
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
No. of
Pos.
10
12
14
16
18
20
24
26
30
34
40
50
60
5
A
.780 [19.81]
.880 [22.35]
.980 [24.89]
1.080 [27.43]
1.180 [29.97]
1.280 [32.51]
1.480 [37.59]
1.580 [40.13]
1.780 [45.21]
1.980 [50.29]
2.280 [57.91]
2.780 [70.61]
3.280 [83.31]
Dimensions
B
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.400 [35.56]
1.500 [38.10]
1.700 [43.18]
1.900 [48.26]
2.200 [55.88]
2.700 [68.58]
3.200 [81.28]
C
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.100 [27.94]
1.200 [30.48]
1.400 [35.56]
1.600 [40.64]
1.900 [48.26]
2.400 [60.96]
2.900 [73.66]
Plating A
103165-1
103165-2
103165-3
103165-4
103165-5
103165-6
103165-8
103165-9
1-103165-1
1-103165-3
1-103165-6
2-103165-1
2-103165-6
Post Plating/Part Nos.
Plating B
102620-1
102620-2
102620-3
102620-4
102620-5
102620-6
102620-8
102620-9
1-102620-1
1-102620-3
1-102620-6
2-102620-1
2-102620-6
Plating C
87568-1
87568-2
87568-3
87568-4
87568-5
87568-6
—
87568-9
—
1-87568-3
1-87568-6
2-87568-1
2-87568-6
144
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Standard Profile Headers—Shrouded, with .150 [3.81] End Dimension,
Double-Row, .100 x .100 [2.54 x 2.54] Centerline
.025 [0.64] Square
Right-Angle Post
(with Plastic Holddowns)
.639
.489 [16.23]
[12.42]
.150
[3.81]
(2 Plc.)
Photo 98185-9
.040
[1.02]
(2 Plc.)
B
C
.100 Typ.
[2.54]
.400
[10.16]
.015
[.020]
0.38
[0.51]
[ ]
.318
[8.08]
.289
[7.34]
.100
[2.54]
Material and Finish:
Housing—Black thermoplastic,
94V-0 rated
Posts—Copper alloy, duplex plated
.000015 [0.00038] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin-lead on solder area, with entire post
underplated .000050 [0.00127] nickel
.200
Ref.
[5.08]
(Contact Area)
.280
[7.11]
.135
[3.43]
.090
[2.29]
(2 Plc.)
.050
(2 Plc.)
[1.27]
A
.451
[11.46]
.180
[4.57]
.100
[2.54]
(Standoffs)
Related Product Data:
Mateable Connectors:
AMPMODU MTE Receptacles—
pages 249, 250, 252 (used with
coupling shroud on page 258)
AMPMODU Wire-Applied
Receptacles—pages 233-236
.140
[3.56]
(2 Plc.)
C
.100 Typ.
[2.54]
.100*
[2.54]
.040±.003
Dia. Typ.
[1.02±0.08]
Technical Documents (page 294):
.451
[11.46]
.093+.004 Dia.
.09 -.000
2.36+0.10
2.36-.000
(2 Plc.)
See mating connector for applicable
product and application specifications.
[
]
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
No. of
Pos.
10
12
14
16
20
30
34
40
48
A
.780 [19.81]
.880 [22.35]
.980 [24.89]
1.080 [27.43]
1.280 [32.51]
1.780 [45.21]
1.980 [50.29]
2.280 [57.91]
2.680 [68.07]
Dimensions
B
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.200 [30.48]
1.700 [43.18]
1.900 [48.26]
2.200 [55.88]
2.600 [66.04]
Part Nos.
C
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.900 [20.86]
1.400 [35.56]
1.600 [40.64]
1.900 [48.26]
2.300 [58.42]
104319-7
104319-8
104319-5
104319-1
104319-2
104319-3
104319-6
104319-4
104319-9
5
145
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Standard Profile Headers—Shrouded, with .150 [3.81] End Dimension,
Double-Row, .100 x .100 [2.54 x 2.54] Centerline (Continued)
.025 [0.64] Square
Straight Post (with
Detent Windows and
Mounting Ears)
.352
[8.94]
Typ.
.220
[5.59]
Typ.
.150
[3.81]
Typ.
.200
Ref.
[5.08]
(Contact Area)
.062 R
[1.57]
Typ.
.100
[2.54]
.280
[7.11]
.400
[10.16]
.090
[2.29]
Typ.
.100 Typ.
[2.54]
C
B
Material and Finish:
Housing—Black thermoplastic,
94V-0 rated
Posts—Copper alloy, plated .000030
[0.00076] gold over .000050 [0.00127]
nickel on entire post
.125
[3.18]
A
F
.080
[2.03]
Typ.
.440
[11.18]
Mateable Connectors:
AMPMODU Wire-Applied
Receptacles—pages 233-236
AMPMODU MTE Receptacles—
pages 249, 250, 252 (used with
coupling shroud on page 258)
.318
[8.08]
.047 (2 Plc.)
[1.19]
D
E
Related Product Data:
.090
[2.29]
.090
[2.29]
.240
[6.10]
Typ.
G
Accessories:
Barrier Insert—page 221
D
.100* Typ.
[2.54]
.352
[8.94]
Technical Documents (page 294):
See mating connector for applicable
product and application specifications.
.050 Typ.
[1.27]
.100*
[2.54]
.125 Dia.Typ.
[3.18]
C
.035±.003
Dia. Typ.
[0.89±0.08]
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
No. of
Pos.
10
14
20
24
26
34
40
50
60
5
A
.780 [19.81]
.980 [24.89]
1.280 [32.51]
1.480 [37.59]
1.580 [40.13]
1.980 [50.29]
2.280 [57.91]
2.780 [70.61]
3.280 [83.31]
B
.700 [17.78]
.900 [22.86]
1.200 [30.48]
1.400 [35.56]
1.500 [38.10]
1.900 [48.26]
2.200 [55.88]
2.700 [68.58]
3.200 [81.28]
C
.400 [10.16]
.600 [15.24]
.900 [22.86]
1.100 [27.94]
1.200 [30.48]
1.600 [40.64]
1.900 [48.26]
2.400 [60.96]
2.900 [73.66]
Dimensions
D
1.104 [28.04]
1.304 [33.12]
1.604 [40.74]
1.804 [45.82]
1.904 [48.36]
2.304 [58.52]
2.604 [66.14]
3.104 [78.84]
3.604 [91.54]
Part Nos.
E
1.304 [33.12]
1.504 [38.20]
1.804 [45.82]
2.004 [50.90]
2.104 [53.44]
2.504 [63.60]
2.804 [71.22]
3.304 [83.92]
3.804 [96.62]
F
.290 [7.37]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
G
—
—
.890 [22.61]
1.090 [27.69]
1.190 [30.23]
1.590 [40.39]
1.890 [48.01]
2.390 [60.71]
2.890 [73.41]
87474-1
87474-9
87474-2
1-87474-3
87474-3
87474-4
87474-6
87474-7
2-87474-6
146
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Standard Profile Headers—Shrouded Bulkhead Type; with .066 [1.68] End
Dimension, Double-Row, .100 x .100 [2.54 x 2.45] Centerline
.025 [0.64] Square
Straight Post (with
Detent Windows and
Mounting Ears)
.090
[2.29]
Typ.
E
D
.352
[8.94]
Typ.
.220
[5.59]
C
.100
Typ.
[2.54]
.080
Typ.
[2.03]
.047
[1.19]
Typ.
.100
[2.54]
.400
[10.16]
.280
[7.11]
.040
[1.02]
Typ.
.062 R
[1.57]
Typ.
.066** Typ.
[1.68]
B
.090
[2.29]
Typ.
.200
Ref.
[5.08]
(Contact Area)
A
Material and Finish:
Housing—Black thermoplastic,
94V-0 rated
Posts—Copper alloy, plated .000030
[0.00076] gold over .000050 [0.00127]
nickel on entire post
.330
[8.38]
.318
[8.08]
G
F
.530
[13.46]
.062
[1.57]
Thick Panel
.880
[22.35]
Related Product Data:
.080
[2.03]
Typ.
Mateable Connectors:
AMPMODU Board Mount
Receptacles—pages 193, 196, 197
AMPMODU Wire-Applied
Receptacles—pages 233-236
AMPMODU MTE Receptacles—
pages 245, 246, 251
AMPMODU MT Receptacles—
pages 275, 276
.240
Typ.
[6.10]
.288
[7.32]
F
G
.235±.002
[5.97±0.05]
±.002
D [±0.05]
±.002
H [±0.05]
.440±.002
[11.18±0.05]
Accessories:
Barrier Insert—page 221
.130-.135 Dia. Typ.
[3.30-3.43]
.005
[0.13]
R Max.
(4 Corners)
Technical Documents (page 294):
See mating connector for applicable
product and application specifications.
Recommended Panel Cutout
**Both mating faces have same end dimension.
No. of
Pos.
10
12
20
24
26
34
40
50
60
A
.612 [15.54]
.712 [18.08]
1.112 [28.24]
1.312 [33.32]
1.412 [35.86]
1.812 [46.02]
2.112 [53.64]
2.612 [66.34]
3.112 [79.04]
B
.532 [13.51]
.632 [16.05]
1.032 [26.21]
1.232 [31.29]
1.332 [33.83]
1.732 [43.99]
2.032 [51.61]
2.532 [64.31]
3.032 [77.01]
C
.400 [10.16]
.500 [12.70]
.900 [22.86]
1.100 [27.94]
1.200 [30.48]
1.600 [40.64]
1.900 [48.26]
2.400 [60.96]
2.900 [73.66]
Dimensions
D
1.104 [28.04]
1.204 [30.58]
1.604 [40.74]
1.804 [45.82]
1.904 [48.36]
2.304 [58.52]
2.604 [66.14]
3.104 [78.84]
3.604 [91.54]
E
1.304 [33.12]
1.404 [35.66]
1.804 [45.82]
2.004 [50.90]
2.104 [53.44]
2.504 [63.60]
2.804 [71.22]
3.304 [83.92]
3.804 [96.62]
F
.206 [5.23]
.206 [5.23]
.106 [2.69]
.106 [2.69]
.106 [2.69]
.106 [2.69]
.106 [2.69]
.106 [2.69]
.106 [2.69]
G
—
—
.806 [20.47]
1.006 [25.55]
1.106 [28.09]
1.506 [38.25]
1.806 [45.87]
2.306 [58.57]
2.806 [71.27]
H
.632 [16.05]
.732 [18.59]
1.132 [28.75]
1.332 [33.83]
1.432 [36.37]
1.832 [46.53]
2.132 [54.15]
2.632 [66.85]
3.132 [79.55]
Part Nos.
87608-1
87608-2
87608-6
87608-8
87608-9
1-87608-3
1-87608-6
2-87608-1
2-87608-6
5
147
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Standard Profile Headers—Shrouded Bulkhead Type; with .150 [3.81] End
Dimension, Double-Row, .100 x .100 [2.54 x 2.45] Centerline
.025 [0.64] Square
Straight Post (with
Detent Windows and
Mounting Ears)
D
.352
[8.94]
Typ.
.220
[5.59]
.090
[2.29]
Typ.
C
.080
Typ.
[2.03]
.100
Typ.
[2.54]
.047
[1.19]
Typ.
.100
[2.54]
.400
[10.16]
.280
[7.11]
.040
[1.02]
Typ.
.062 R
[1.57]
Typ.
.150** Typ.
[3.81]
B
Material and Finish:
.200
Ref.
[5.08]
(Contact Area)
.530
[13.46]
.062
[1.57]
Thick Panel
.880
[22.35]
Related Product Data:
.080
[2.03]
Typ.
Mateable Connectors:
AMPMODU MTE Receptacles—
pages 249, 250, 252 (used with
coupling shroud on page 258)
AMPMODU Wire-Applied
Receptacles—pages 233-236
.240
Typ.
[6.10]
.288
[7.32]
F
G
.235±.002
[5.97±0.05]
±.002
D [±0.05]
±.002
H [±0.05]
Accessories:
.090
[2.29]
Typ.
A
G
F
Housing—Black thermoplastic,
94V-0 rated
Posts—Copper alloy, plated .000030
[0.00076] gold over .000050 [0.00127]
nickel on entire post
.330
[8.38]
.318
[8.08]
.440±.002
[11.18±0.05]
Barrier Insert—page 221
.130-.135 Dia. Typ.
[3.30-3.43]
.005
[0.13]
R Max.
(4 Corners)
Technical Documents (page 294):
See mating connector for applicable
product and application specifications.
Recommended Panel Cutout
**Both mating faces have same end dimension.
No. of
Pos.
10
20
24
26
30
32
34
40
50
60
5
A
.780 [19.81]
1.280 [32.51]
1.480 [37.59]
1.580 [40.13]
1.780 [45.21]
1.880 [47.75]
1.980 [50.29]
2.280 [57.91]
2.780 [70.61]
3.280 [83.31]
B
.700 [17.78]
1.200 [30.48]
1.400 [35.56]
1.500 [38.10]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.200 [55.88]
2.700 [68.58]
3.200 [81.28]
C
.400 [10.16]
.900 [22.86]
1.100 [27.94]
1.200 [30.48]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.900 [48.26]
2.400 [60.96]
2.900 [73.66]
Dimensions
D
1.104 [28.04]
1.604 [40.74]
1.804 [45.82]
1.904 [48.36]
2.104 [53.44]
2.204 [55.98]
2.304 [58.52]
2.604 [66.14]
3.104 [78.84]
3.604 [91.54]
Part Nos.
E
1.304 [33.12]
1.804 [45.82]
2.004 [50.90]
2.104 [53.44]
2.304 [58.52]
2.404 [61.06]
2.504 [63.60]
2.804 [71.22]
3.304 [83.92]
3.804 [96.62]
F
.290 [7.37]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
G
—
.890 [22.61]
1.090 [27.69]
1.190 [30.23]
1.390 [35.31]
1.490 [37.85]
1.590 [40.39]
1.890 [48.01]
2.390 [60.71]
2.890 [73.41]
H
.800 [20.32]
1.300 [33.02]
1.500 [38.10]
1.600 [40.64]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
2.300 [58.42]
2.800 [71.12]
3.300 [83.82]
87605-1
87605-6
87605-8
87605-9
1-87605-1
1-87605-2
1-87605-3
1-87605-6
2-87605-1
2-87605-6
148
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Standard Profile Headers—Shrouded Bulkhead Type; with .066/.150 [1.68/3.81]
End Dimension, Double-Row, .100 x .100 [2.54 x 2.45] Centerline
.025 [0.64] Square
Straight Post (with
Detent Windows and
Mounting Ears)
.200
Ref.
[5.08]
(Contact Area)
E
D
.352
[8.94]
Typ.
.220
[5.59]
.047
[1.19]
Typ.
C
.080
[2.03]
.400
[10.16]
.100
[2.54]
.280
[7.11]
Material and Finish:
.090
[2.29]
Typ.
.062
R
[1.57]
Typ.
.150 Typ.
[3.81]
B
.040
Typ.
[1.02]
Housing—Black thermoplastic,
94V-0 rated
Posts—Copper alloy, plated .000030
[0.00076] gold over .000050 [0.00127]
nickel on entire post
.880
[22.35]
.330
[8.38]
.090
[2.29]
Typ.
A
.080
[2.03]
Typ.
.318
[8.08]
G
F
.289
[7.34]
Related Product Data:
Mateable Connectors with
.066 [1.68] End Dimension:
AMPMODU Board Mount
Receptacles—pages 193, 196, 197
AMPMODU Wire-Applied
Receptacles—pages 233-236
AMPMODU MTE Receptacles—
pages 245, 246, 251
AMPMODU MT Receptacles—
pages 275, 276
.240
[6.10]
Typ.
L
.062 R
[1.57]
Typ.
.040
[1.02]
Typ.
.066
[1.68]
Typ.
.400
[10.16]
.080
[2.03]
C
.047
[1.19]
Typ.
Barrier Insert—page 221
H
J
K
Mateable Connectors with
.150 [3.81] End Dimension:
AMPMODU MTE Receptacles—
pages 249, 250, 252 (used with
coupling shroud on page 258)
Accessories:
.062
[1.57]
Thick Panel
.352
[8.94]
Typ.
.220
[5.59]
D
E
Technical Documents (page 294):
See mating connector for applicable
product and application specifications.
±.002
D [±0.05]
.235±.002
[5.97±0.05]
±.002
M [±0.05]
.440±.002
[11.18±0.05]
.005
[0.13]
R Max.
(4 Corners)
5
.130-.135 Dia. Typ.
[3.30-3.43]
Recommended Panel Cutout
149
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Standard Profile Headers—Shrouded Bulkhead Type; with .066/.150 [1.68/3.81]
End Dimension, Double-Row, .100 x .100 [2.54 x 2.45] Centerline (Continued)
Dimensions
No. of
Pos.
10
20
24
26
30
34
40
50
60
A
.780 [19.81]
1.280 [32.51]
1.480 [37.59]
1.580 [40.13]
1.780 [45.21]
1.980 [50.29]
2.280 [57.91]
2.780 [70.61]
3.280 [83.31]
B
.700 [17.78]
1.200 [30.48]
1.400 [35.56]
1.500 [38.10]
1.700 [43.18]
1.900 [48.26]
2.200 [55.88]
2.700 [68.58]
3.200 [81.38]
C
.400 [10.16]
.900 [22.86]
1.100 [27.94]
1.200 [30.48]
1.400 [35.56]
1.600 [40.64]
1.900 [48.26]
2.400 [60.96]
2.900 [73.66]
No. of
Pos.
10
20
24
26
30
34
40
50
60
G
—
.890 [22.61]
1.090 [27.69]
1.190 [30.23]
1.390 [35.31]
1.590 [40.39]
1.890 [48.01]
2.390 [60.71]
2.890 [73.41]
H
.206 [5.23]
.106 [2.69]
.106 [2.69]
.106 [2.69]
.106 [2.69]
.106 [2.69]
.106 [2.69]
.106 [2.69]
.106 [2.69]
J
—
.806 [20.47]
1.006 [25.55]
1.106 [28.09]
1.306 [33.17]
1.506 [38.25]
1.806 [45.87]
2.306 [58.57]
2.806 [71.27]
D
1.104 [28.04]
1.604 [40.74]
1.804 [45.82]
1.904 [48.36]
2.104 [53.44]
2.304 [58.52]
2.604 [66.14]
3.304 [83.92]
3.604 [91.54]
E
1.304 [33.12]
1.804 [45.82]
2.004 [50.90]
2.104 [53.44]
2.304 [58.52]
2.504 [63.60]
2.804 [71.22]
3.304 [83.92]
3.804 [96.62]
F
.290 [7.37]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
Dimensions
K
.612 [15.54]
1.112 [28.24]
1.312 [33.32]
1.412 [35.86]
1.612 [40.94]
1.812 [46.02]
2.112 [53.64]
2.612 [66.34]
3.112 [79.04]
L
.532 [13.51]
1.032 [26.21]
1.232 [31.29]
1.332 [33.83]
1.532 [38.91]
1.732 [43.99]
2.032 [51.61]
2.532 [64.31]
3.032 [77.01]
M
.632 [16.05]
1.132 [28.75]
1.332 [33.83]
1.432 [36.37]
1.632 [41.45]
1.832 [46.53]
2.132 [54.15]
2.632 [66.85]
3.132 [79.55]
Part Nos.
87496-2
87496-7
87496-9
1-87496-0
1-87496-2
1-87496-4
1-87496-7
87496-1
2-87496-6
Part Nos.
87496-2
87496-7
87496-9
1-87496-0
1-87496-2
1-87496-4
1-87496-7
87496-1
2-87496-6
5
150
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
AMP-LATCH Low Profile Headers––Shrouded
Product Facts
■
Available in .000015
[0.00038] and .000030
[0.00076] gold duplex
plated posts
■
Available in selected
positions 10 thru 60
■
Flame retardant,
thermoplastic housings,
94V-0 rated
■
Vertical and right-angle
versions available in double
row configurations
■
Available in .025 [0.64]
square drawn wire posts
■
Wash out clearance for flux
removal
■
Accepts center and double
bar polarization housings
■
Mates with AMP-LATCH
Ribbon Cable Connectors
■
Available with and without
eject latches
■
Available with and without
high temperature compatible
material
■
■
Recognized under the
Component Program of
Underwriters
Laboratories Inc.
File No. E28476
Certified by Canadian
Standards
Association,
File No. LR 7189
Photo 110929
Performance
Characteristics
Electrical:
Insulation Resistance—5,000
megohms minimum initial
Dielectric Withstanding Voltage—
750 V rms at sea level
Environmental:
Operating Temperature—
-65°C to +105°C
Current—1 ampere maximum
per contact
5
151
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
AMP-LATCH Low Profile Headers—Shrouded, with .150 [3.81] End
Dimension, Double-Row, .100 x .100 [2.54 x 2.54] Centerline
.025 [0.64] Square
Straight Post
A
.045 (2 Plc.)
[1.14]
.153+.008
.153 -.005
B
+0.20 ]
[3.89
.15 -0.13
.075±.002
(2 Plc.)
[1.91±0.05]
.165
[4.19]
.360
[9.14]
Photo 110921
Material and Finish:
Housing—Black thermoplastic,
94V-0 rated
Posts—Copper alloy, plated as follows:
Plating A—Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin-lead on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating B—Duplex plated .000015
[0.00038] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin-lead on solder area, with entire post
underplated .000050 [0.00127] nickel
.130
[3.30]
.025±.001
[0.64±0.03]
Typ.
.015
.010
0.38
0.25
.100
[2.54]
[ ]
.200 (Contact
[5.08] Area)
.040
.035
1.02
0.89
[ ]
.385
[9.78]
.020
.015
0.51
0.38
.120±.015
[3.05±0.38]
.240
[6.10]
[ ]
Related Product Data:
.100
[2.54]
.185
[4.70] Typ.
.185±.010
[4.70±0.25]
Electrical Characteristics—
page 151
Mateable Connectors:
AMPMODU Wire-Applied
Receptacles—page 237
AMPMODU Board Mount
Receptacles—pages 196, 197
Short Point Wire-Applied
Connectors—page 241
.100±.003*
Typ.
[2.54±0.08]
.100±.003*
[2.54±0.08]
.040±.003
[1.02±0.08]
Dia. Typ.
Recommended PCBoard Hole Layout
For Manual Insertion
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
No. of
Pos.
10
14
16
20
26
34
40
44
50
60
5
Dimensions
A
.800 [20.32]
1.000 [25.40]
1.100 [27.94]
1.300 [33.02]
1.600 [40.64]
2.000 [50.80]
2.300 [58.42]
2.500 [63.50]
2.800 [71.12]
3.300 [83.82]
B
.400 [10.16]
.600 [15.24]
.700 [17.78]
.900 [22.86]
1.200 [30.48]
1.600 [40.64]
1.900 [48.26]
2.100 [53.34]
2.400 [60.96]
2.900 [73.66]
Post Plating/Part Nos.
Plating A
Plating B
103309-1
103308-1
103309-2
103308-2
103309-3
103308-3
103309-5
103308-5
103309-6
103308-6
103309-7
103308-7
103309-8
103308-8
—
103308-9
1-103309-0
1-103308-0
1-103309-2
1-103308-2
152
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
AMP-LATCH Low Profile Headers—Shrouded, with .150 [3.81] End
Dimension, Double-Row, .100 x .100 [2.54 x 2.54] Centerline (Continued)
.025 [0.64] Square
Right-Angle Post
Position No.1
Indicator
•
.385
[9.77]
.165
[4.19]
Photo 110922
.025±.001
Typ.
[0.64±0.03]
Material and Finish:
Housing—Black thermoplastic,
94V-0 rated
Posts—Copper alloy, plated as follows:
Plating A—Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin-lead on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating B—Duplex plated .000015
[0.00038] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin-lead on solder area, with entire post
underplated .000050 [0.00127] nickel
A
.1975
[5.016]
.153+.008
-.005
3.88 +.203
-.127
[
B
.240
[6.09]
.200
(contact area)
[5.08]
.045
(2 Plc.)
[1.14]
.130
Typ.
[3.30]
]
2 Plc.
.100
[2.54]
.025±.001
.360 [.635±0.03]
[9.14]
Typ.
.130
[3.30]
.135+.020
-.010
3.42+0.51
-0.25
[
.075±.002
[1.90±0.05]
.185±.010
[4.69±0.25]
Typ.
.185
Typ.
[4.69]
.010
[0.25]
]
.100
[2.54]
Related Product Data:
.123
[3.12]
Electrical Characteristics—
page 151
Mateable Connectors:
AMPMODU Wire-Applied
Receptacles—page 237
Short Point Wire-Applied
Connectors—page 241
.100±.003*
[2.54±0.08] Typ.
.100±.003*
[2.54±0.08]
.035±.003
[0.89±0.08]
Dia. Typ.
Recommended PC Board Hole Layout
For Manual Insertion
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
No. of
Pos.
10
14
16
20
26
34
40
44
50
60
Dimensions
A
.800 [20.32]
1.000 [25.40]
1.100 [27.94]
1.300 [33.02]
1.600 [40.64]
2.000 [50.80]
2.300 [58.42]
2.500 [63.50]
2.800 [71.12]
3.300 [83.82]
B
.400 [10.16]
.600 [15.24]
.700 [17.78]
.900 [22.86]
1.200 [30.48]
1.600 [40.64]
1.900 [48.26]
2.100 [53.34]
2.400 [60.96]
2.900 [73.66]
Post Plating/Part Nos.
Plating A
Plating B
103311-1
103310-1
103311-2
103310-2
103311-3
103310-3
103311-5
103310-5
103311-6
103310-6
103311-7
103310-7
103311-8
103310-8
103311-9
—
1-103311-0
1-103310-0
1-103311-2
1-103310-2
5
153
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
AMP-LATCH Low Profile Headers—Shrouded High Temperature Housings*, with
.150 [3.81] End Dimension, Double-Row, .100 x .100 [2.54 x 2.54] Centerline
.025 [0.64] Square
Straight Post (with Board
Retention Feature)
A
.153+.008
.153 -.005
3.88+0.20
.15 - 0.13
(2 Plc.)
[
.045
[1.14]
B
]
.075±.002
[1.91±0.05] (2 Plc.)
.165
[4.19]
.365
[9.27]
Photo 110923
Material and Finish:
Housing—Gray thermoplastic,
94V-0 rated
Posts—Copper alloy, plated as follows:
Plating—Duplex plated .000015
[0.00038] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin-lead on solder area, with entire post
underplated .000050 [0.00127] nickel
.025
.020
0.64
0.51
.025±.001
[0.64±0.03]
Typ.
.140
[3.56]
[ ]
.100
[2.54]
.200 (Contact Area)
[5.08]
.040
.035
1.02
0.89
[ ]
Related Product Data:
Electrical Characteristics—
page 151
Mateable Connectors:
AMPMODU Wire-Applied
Receptacles—page 237
AMPMODU Board Mount
Receptacles—pages 196, 197
Short Point Wire-Applied
Connectors—page 241
.120±.015
[3.05±0.38]
.385
[9.78]
.020
.015
0.51
0.38
[ ]
.185±.010
[4.69±0.25]
.240
[6.10]
.100
[2.54]
.185
[4.69]
.100±.003*
Typ.
[2.54±0.08]
*Reflow solder process compatible
.100±.003*
[2.54±0.08]
.040±.003
[1.02±0.08]
Dia. Typ.
Recommended PC Board Hole Layout
For Manual Insertion
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
No. of
Pos.
10
14
16
20
24
34
40
50
60
5
Dimensions
A
.800 [20.32]
1.000 [25.40]
1.100 [27.94]
1.300 [33.02]
1.400 [35.56]
2.000 [50.80]
2.300 [58.42]
2.800 [71.12]
3.300 [83.82]
B
.400 [10.16]
.600 [15.24]
.700 [17.78]
.900 [22.86]
1.100 [27.94]
1.600 [40.64]
1.900 [48.26]
2.400 [60.96]
2.900 [73.66]
Post Plating
Part Nos.
104338-1
104338-2
104338-3
104338-4
104338-5
104338-7
104338-8
104338-9
1-104338-0
154
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
AMP-LATCH Low Profile Headers—Shrouded High Temperature Housings*, with .150
[3.81] End Dimension, Double-Row, .100 x .100 [2.54 x 2.54] Centerline (Continued)
.025 [0.64] Square
Right-Angle Post (with
Board Retention Feature)
Position No.1
Indicator
•
.385
[9.77]
.165
[4.19]
.025±.001
[0.64±0.03] Typ.
A
B
Photo 110924
Material and Finish:
+.008
.153
-.005
+0.20
3.88
-0.13
2 Plc.
[
Housing—Gray thermoplastic,
94V-0 rated
Posts—Copper alloy, plated as follows:
Plating—Duplex plated .000015
[0.00038] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin-lead on solder area, with entire post
underplated .000050 [0.00127] nickel
.200
[5.08]
.045
(2 Plc.)
[1.14]
.130
Typ.
[3.30]
]
.100
[2.54]
.370
[9.40]
.025
.020
0.64
0.50
[ ]
.140
[3.56]
.185±.010
[4.69±0.25]
Typ.
.240
[6.09]
.200
[5.08]
(contact area)
.025±.001
[.635±0.03]
Typ.
.125
.075±.002
[1.90±0.05]
2 Plc.
.185
Typ.
[4.69]
.123
[3.12]
Related Product Data:
Electrical Characteristics—
page 151
Mateable Connectors:
AMPMODU Wire-Applied
Receptacles—page 237
Short Point Wire-Applied
Connectors—page 241
+.020
-.010
[3.18+0.51
-0.25 ]
.100
[2.54]
.100±.003*
[2.54±0.08] Typ.
.100±.003*
[2.54±0.08]
.040±.003
[1.02±0.08]
Dia. Typ.
*Reflow solder process compatible
Recommended PC Board Hole Layout
For Manual Insertion
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
No. of
Pos.
10
14
16
20
40
50
Dimensions
A
.800 [20.32]
1.000 [25.40]
1.100 [27.94]
1.300 [33.02]
2.300 [58.42]
2.800 [71.12]
B
.400 [10.16]
.600 [15.24]
.700 [17.78]
.900 [22.86]
1.900 [48.26]
2.400 [60.96]
Post Plating
Part Nos.
104340-1
104340-2
104340-3
104340-4
104340-8
104340-9
5
155
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
AMP-LATCH Low Profile Headers—Shrouded with Ejection Latches and .150
[3.81] End Dimension, Double-Row, .100 x .100 [2.54 x 2.54] Centerline
.025 [0.64] Square
Straight Post
.200 (Contact
[5.08] Area)
Photo 110926
.120±.015
[3.05±0.38]
.185
[4.69]
.100
[2.54]
A
Material and Finish:
Housing—Black thermoplastic,
94V-0 rated
Posts—Copper alloy, duplex plated
.000030 [0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin-lead on solder area, with entire post
underplated .000050 [0.00127] nickel
.045
[1.14] 2 Plc.
+.008
.153 -.005
.153+0.20
3.88
-0.13
.153
(2 Plc.)
[
B
]
.165
[4.19]
Related Product Data:
.075±.002
(2 Plc.)
[1.905±0.05]
.360
[9.14]
.130
[3.30]
.015
.010
0.38
0.25
.025±.001
[.635±0.03]
Typ.
Electrical Characteristics—
page 151
Mateable Connectors:
AMPMODU Wire-Applied
Receptacles—page 237
(For .585 [14.90] Latching Height)
.100
[2.54]
[ ]
.100±.003*
[2.54±0.08] Typ.
.100±.003*
[2.54±0.08]
.035±.003
[.889±0.08]
Dia. Typ.
Recommended PC Board Hole Layout
For Manual Insertion
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
5
Dimensions
No. of
Pos.
A
B
10
.800 [20.32]
.400 [10.16]
14
1.000 [25.40]
.600 [15.24]
16
1.100 [27.94]
.700 [17.78]
20
1.300 [33.02]
.900 [22.86]
26
1.600 [40.64]
1.200 [30.48]
34
2.000 [50.80]
1.600 [40.64]
40
2.300 [58.42]
1.900 [48.26]
50
2.800 [71.12]
2.400 [60.96]
60
3.300 [83.82]
2.900 [73.66]
C
.585 [14.90]
.437 [11.10]
.585 [14.90]
.437 [11.10]
.585 [14.90]
.437 [11.10]
.585 [14.90]
.437 [11.10]
.585 [14.90]
.437 [11.10]
.585 [14.90]
.437 [11.10]
.585 [14.90]
.437 [11.10]
.585 [14.90]
.437 [11.10]
.585 [14.90]
.437 [11.10]
.917
.769
.917
.769
.917
.769
.917
.769
.917
.769
.917
.769
.917
.769
.917
.769
.917
.769
D
[23.29]
[19.53]
[23.29]
[19.53]
[23.29]
[19.53]
[23.29]
[19.53]
[23.29]
[19.53]
[23.29]
[19.53]
[23.29]
[19.53]
[23.29]
[19.53]
[23.29]
[19.53]
Part Nos.
104128-1
104313-1
104128-2
104313-2
104128-3
104313-3
104128-4
104313-4
104128-5
104313-5
104128-6
104313-6
104128-7
104313-7
104128-9
104313-9
1-104128-0
1-104313-0
156
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
D
.240
[6.10]
.385
[9.78]
.185±.010
[4.69±0.25]
C
(Latching
Height)
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
AMP-LATCH Low Profile Headers—Shrouded with Ejection Latches and .150
[3.81] End Dimension, Double-Row, .100 x .100 [2.54 x 2.54] Centerline (Continued)
Position No.1 Indicator
.025 [0.64] Square
Right-Angle Post
.385
[9.77]
.165
[4.19]
.025±.001
[.635±0.03]
Typ.
A
.045
2 Plc.
[1.14]
.200
[5.08]
Photo 110927
+.008
.153 -.005
+0.20
3.88 -0.13
2 Plc.
[
B
]
Material and Finish:
Housing—Black thermoplastic,
94V-0 rated
Posts—Copper alloy, duplex plated
.000030 [0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin-lead on solder area, with entire post
underplated .000050 [0.00127] nickel
D
.360
[9.14]
.200
[5.08]
(contact area)
.130
Typ.
[3.30]
.100
[2.54]
.140
[3.56]
.240
[6.09]
.185±.010
[4.69±0.25]
.185 Typ.
[4.69]
.075±.002
[1.90±0.05]
(2 Plc.)
.015
.010
0.38
0.25
[ ]
C
(Latching
Height)
.123
[3.12]
+.020
.135 -.010
[3.43+0.51
-0.25]
.100
[2.54]
.100±.003*
[2.54±0.08] Typ.
Related Product Data:
Electrical Characteristics—
page 151
Mateable Connectors:
AMPMODU Wire-Applied
Receptacles—page 237
(For .585 [14.90] Latching Height)
.100±.003*
[2.54±0.08]
.035±.003
[0.09±0.08]
Dia. Typ.
Recommended PC Board Hole Layout
For Manual Insertion
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
No. of
Pos.
Dimensions
A
B
10
.800 [20.32]
.400 [10.16]
14
1.000 [25.40]
.600 [15.24]
16
1.100 [27.94]
.700 [17.78]
20
1.300 [33.02]
.900 [22.86]
26
1.600 [40.64]
1.200 [30.48]
34
2.000 [50.80]
1.600 [40.64]
40
2.300 [58.42]
1.900 [48.26]
50
2.800 [71.12]
2.400 [60.96]
60
3.300 [83.82]
2.900 [73.66]
C
.585 [14.90]
.437 [11.10]
.585 [14.90]
.437 [11.10]
.585 [14.90]
.437 [11.10]
.585 [14.90]
.437 [11.10]
.585 [14.90]
.437 [11.10]
.585 [14.90]
.437 [11.10]
.585 [14.90]
.437 [11.10]
.585 [14.90]
.437 [11.10]
.585 [14.90]
.437 [11.10]
D
.917 [23.29]
.769 [19.53]
.917 [23.29]
.769 [19.53]
.917 [23.29]
.769 [19.53]
.917 [23.29]
.769 [19.53]
.917 [23.29]
.769 [19.53]
.917 [23.29]
.769 [19.53]
.917 [23.29]
.769 [19.53]
.917 [23.29]
.769 [19.53]
.917 [23.29]
.769 [19.53]
Part Nos.
104130-1
104315-1
104130-2
104315-2
104130-3
104315-3
104130-4
104315-4
104130-5
104315-5
104130-6
104315-6
104130-7
104315-7
104130-9
104315-9
1-104130-0
1-104315-0
5
157
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
AMPMODU Stacking Connectors—Shrouded,
.025 x .025 [0.64 x 0.64] Posts
Product Facts
■
Parallel PC board stacking
without use of mother boards
■
Provides space between
boards for interference-free
routing of wire-to-board
connections
■
Two header heights
available: .785 [19.94] and
1.200 [30.48]
■
Vertical mount headers are
fully shrouded
■
Receptacle contacts have
dual cantilever beams with
built-in overstress protection
■
.025 [0.64] sq. posts and
receptacle contacts on
double-row, .100 x .100
[2.54 x 2.54] centers
■
Header posts and receptacle
contacs are phosphor bronze,
duplex plated
■
Housings are made of
flame retardant, glass-filled
AMPMODU stacking
connectors are a two-piece
interconnection system
designed for parallel stacking
printed circuit boards,
without the use of mother
boards.
Vertical mount headers and
receptacle assemblies
feature duplex plated posts
and receptacle contacts on
a double-row, .100 x .100
[2.54 x 2.54] grid. The .025
[ 0.64] sq. header posts are
more protected, and the
top-entry receptacle
contacts utilize the proven
AMPMODU receptacle
contact design; dual
cantilever beams with builtin overstress protection.
Headers are available in
two heights: .785 [19.94]
and 1.200 [30.48]. This
allows the customer to use
the height of the header to
keep wire-to-board
connections up and away
from other board
components, particularly if
the components are densely
packaged around the
header.
5
158
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Receptacle Assemblies, Double-Row Board Mounted
Vertical Mount, Top Entry,
High Profile, Selectively
Loaded (with Standoffs)
A
.050
[1.27]
B
.100
[2.54]
.100
[2.54]
.238
[6.05]
Material and Finish:
Housing—Brown thermoplastic, flame
retardant
Contacts—Phosphor bronze, duplex
plated .000015 [0.00038] gold on mating
area, .000050-.000100 [0.001270.00254] bright tin-lead on solder area,
with entire contact underplated .000050
[0.00127] nickel
Post Entry
.025
[0.64]
.320
[8.13]
.020
[0.51]
(Standoffs)
.100
[2.54]
.175
[4.45]
.115
[2.92]
B
.100* Typ.
[2.54]
.035±.003
Dia.
[0.89±0.08]
.100*
[2.54]
Recommended PC Board Hole Layout
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
B
Receptacle
Assembly
Part No.
2.400 [60.96]
2.300 [58.42]
102766-1
3.000 [76.2]
2.900 [73.66]
102766-4
Dimensions
No. of
Pos.
48*
(40 Active)
60*
(52 Active)
A
5
*In addition to the active positions, each receptacle has four cavities on each
end that are not loaded with contacts. These empty cavities aid in aligning
the receptacle with header posts during mating.
Notes: 1. AMP, part no. and date code stamped on housing where size
permits.
Notes: 2. These receptacle assemblies mate with headers of the same
size as the active positions listed above. Refer to pages 160
and 161.
159
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Headers, Double-Row, .785 [19.94] Height
.025 x .025 [0.64 x 0.64]
Straight Post (with
Pin Protection)
.320
[8.13]
.090
[2.29]
.100 Typ.
[2.54]
.124
[3.15]
.348
[8.84]
.100
[2.54]
Material and Finish:
Housing—Brown glass-filled
thermoplastic, flame retardant
Posts—Phosphor bronze, duplex plated
.000015 [0.00038] gold on mating area,
.000100-.000200 [0.00254-0.00508]
tin-lead on solder area, with entire post
underplated .000050 [0.00127] nickel
A
B
.250
[3.81]
.103 Dia.
[2.62]
(at Surface)
C
.070
[1.78]
.103
[2.62]
.380
[9.65]
Min.
.340
[8.64]
.025
[0.64]
Sq. Posts
.450
[11.43]
.785
[19.94]
.099
Dia.
[2.51]
(at .340
[8.64] Depth)
.275
[6.99]
.265
[6.73]
.084
[2.13]
.268
[6.81]
D
.025
[0.64]
Sq. Posts
B
.250±.003
[3.81±0.08]
.050±.003
[1.27±0.08]
.100*
[2.54]
Typ.
.100*
[2.54]
.043±.005
Dia.
[1.09±0.13]
.125
[3.18]
Dia.
C
Recommended PC Board Hole Layout
*±.003 [±0.08] tolerances not to
accumulate within one connector pattern.
5
Dimensions
No. of
Header
Pos.
A
B
C
D
Part No.
40
2.720 [69.09]
2.400 [60.96]
1.900 [48.26]
2.430 [61.27]
102871-2
52
3.320 [84.33]
3.000 [76.2]
2.500 [63.5]
3.030 [76.96]
102871-1
Note: These headers mate with receptacle assemblies having the same number of active positions. See page 159.
160
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Headers, Double-Row, 1.200 [30.48] Height
.025 x .025 [0.64 x 0.64]
Straight Post (with
Pin Protection)
.320
[8.13]
.090
[2.29]
.124
[3.15]
.100 Typ.
[2.54]
.348
[8.84]
.100
[2.54]
Material and Finish:
Housing—Brown glass-filled
thermoplastic, flame retardant
Posts—Phosphor bronze, duplex plated
.000015 [0.00038] gold on mating area,
.000100-.000200 [0.00254-0.00508]
tin-lead on solder area, with entire post
underplated .000050 [0.00127] nickel
A
.250
[6.35]
B
.025
[0.64]
Sq. Posts
.098
[2.49]
C
.077 Dia.
[1.96]
(at Surface)
.250
[6.35]
.040
[1.02]
.340
[8.64]
.350
[8.89]
Min.
.865
[21.97]
1.200
[30.48]
.073
Dia.
[1.85]
(at .340 [8.64]
Depth)
.060
[1.52]
.084
[2.13]
.265
[6.73]
.268
[6.81]
D
.275
[6.99]
.025
[0.64]
Sq. Posts
B
.250±.003
[3.81±0.08]
.050±.003
[1.27±0.08]
.100*
[2.54]
Typ.
.100*
[2.54]
.043±.005
[1.09±0.13]
.125
[3.18]
Dia.
C
Recommended PC Board Hole Layout
*±.003 [±0.08] tolerances not to
accumulate within one connector pattern.
5
Dimensions
No. of
Header
Pos.
A
B
C
D
Part No.
52
3.320 [84.33]
3.000 [76.2]
2.500 [63.5]
3.030 [76.96]
102826-1
Note: This header mates with receptacle assembly having the same number of active positions. See page 159.
161
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
ACTION PIN Headers—Shrouded and Unshrouded
Product Facts
■
Straight posted unshrouded
and shrouded versions
■
.025 [0.64] square
ACTION PIN posts
■
ACTION PIN posts make a
gas-tight, press-fit
connection in platedthrough holes
■
Does not damage platedthrough holes
■
Unshrouded headers
available in selected sizes
1 through 40 positions
(single-row) and 4 through
80 positions (double-row)
■
Shrouded headers (doublerow) available in selected
sizes of 6 through 60
positions
■
Flame retardant, black
thermoplastic housings,
94V-0 rated
■
Available in .100 [2.54]
Centerline spacing in an
insulator header that is
directly mounted on a
printed circuit board
■
Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
■
Certified by Canadian
Standards
Association,
File No. LR 16455
5
162
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
ACTION PIN Headers—Unshrouded, Single-Row,
.100 [2.54] Centerline
.025 [0.64] Square
Straight Post
.050
[1.27]
Max.
A
B
.092
[2.34]
.100
Typ.
[2.54]
.200
Ref.
[5.08]
(Contact Area)
.320
[8.13]
.090
[2.29]
Material and Finish:
Housing—Black thermoplastic, 94V-0
rated
Posts—Copper alloy, duplex plated
.000030 [0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
matte tin-lead on termination end, with
entire post underplated .000050
[0.00127] nickel
.250
[6.35]
.042
[1.07]
Typ.
B
See page 168 for
hole dimensions
.100*
[2.54]
Recommended PC Board Hole Layout
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
Related Product Data:
Mateable Connectors—Refer to
the Mating Post Selection Guide
(page 89)
ACTION PIN Posts—
pages 167, 168
Application Tooling—
page 169
Technical Documents (page 294):
See mating connector for applicable
product and application specifications
Part Nos.
Dimensions
No. of
Pos.
A
B
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
32
36
40
.084 [2.13]
.184 [4.67]
.284 [7.21]
.384 [9.75]
.484 [12.29]
.584 [14.83]
.684 [17.37]
.784 [19.91]
.884 [22.45]
.984 [24.99]
1.084 [27.53]
1.184 [30.07]
1.284 [32.61]
1.384 [35.15]
1.484 [37.69]
1.584 [40.23]
1.684 [42.77]
1.784 [45.31]
1.884 [47.85]
1.984 [50.39]
2.084 [52.93]
2.184 [55.47]
2.284 [58.01]
2.384 [60.55]
2.484 [63.09]
2.584 [65.63]
2.684 [68.17]
2.784 [70.71]
2.884 [73.25]
2.984 [75.79]
3.184 [80.87]
3.584 [91.03]
3.984 [101.19]
—
.100 [2.54]
.200 [5.08]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
2.100 [53.34]
2.200 [55.88]
2.300 [58.42]
2.400 [60.96]
2.500 [63.50]
2.600 [66.04]
2.700 [68.58]
2.800 [71.12]
2.900 [73.66]
3.100 [78.74]
3.500 [88.90]
3.900 [99.06]
For .062
[1.57]
Thick PC Boards
3-103336-5
3-103336-4
4-103336-0
3-103336-6
3-103336-8
3-103336-7
3-103336-9
103336-1
103336-2
103336-3
103336-4
103336-5
103336-6
103336-7
103336-8
103336-9
1-103336-0
1-103336-1
1-103336-2
1-103336-3
—
—
—
—
1-103336-8
—
—
—
—
2-103336-3
2-103336-5
2-103336-9
3-103336-3
For .093-.125
[.236-3.18]
Thick PC Boards
3-102898-5
3-102898-4
4-102898-0
3-102898-6
3-102898-8
3-102898-7
3-102898-9
102898-1
102898-2
102898-3
102898-4
102898-5
102898-6
102898-7
102898-8
102898-9
1-102898-0
1-102898-1
1-102898-2
1-102898-3
1-102898-4
1-102898-5
1-102898-6
1-102898-7
1-102898-8
1-102898-9
2-102898-0
2-102898-1
2-102898-2
2-102898-3
2-102898-5
2-102898-9
3-102898-3
5
Note: To insert header into PCboard, use seating tool with arbor tool or air powered machine—page 169.
163
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
ACTION PIN Headers—Unshrouded, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline
.025 [0.64] Square
Straight Post
.050
[1.27]
Max.
A
.100
[2.54]
B
.100
Typ.
[2.54]
.200
Ref.
[5.08]
(Contact Area)
.320
[8.13]
.090
[2.29]
.042
[1.07]
(2 Plc.)
Material and Finish:
Housing—Black thermoplastic, 94V-0
rated
Posts—Copper alloy, duplex plated
.000030 [0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
matte tin-lead on termination end, with
entire post underplated .000050
[0.00127] nickel
.192
[4.88]
B
.100*
[2.54]
.100*
[2.54]
See page 168 for
hole dimensions
Recommended PC Board Hole Layout
Related Product Data:
Mateable Connectors—Refer to
the Mating Post Selection Guide
(page 89)
ACTION PIN Posts—
pages 167, 168
Application Tooling—
page 169
Accessories:
Barrier Insert—page 221
Technical Documents (page 294):
See mating connector for applicable
product and application specifications
5
.250
[6.35]
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
Part Nos.
Dimensions
No. of
Pos.
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
46
50
60
66
80
A
.184 [4.67]
.284 [7.21]
.384 [9.75]
.484 [12.29]
.584 [14.83]
.684 [17.37]
.784 [19.91]
.884 [22.45]
.984 [24.99]
1.084 [27.53]
1.184 [30.07]
1.284 [32.61]
1.384 [35.15]
1.484 [37.69]
1.584 [40.23]
1.684 [42.77]
1.784 [45.31]
1.884 [47.85]
1.984 [50.39]
2.084 [52.39]
2.284 [58.01]
2.484 [63.09]
2.984 [75.79]
3.284 [83.41]
3.984 [101.19]
B
.100 [2.54]
.200 [5.08]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
2.200 [55.88]
2.400 [60.96]
2.900 [73.66]
3.200 [81.28]
3.900 [99.06]
For .062 [1.57]
Thick
PC Boards
103542-1
103542-2
103542-3
103542-4
103542-5
103542-6
103542-7
103542-8
103542-9
1-103542-0
1-103542-1
1-103542-2
1-103542-3
1-103542-4
1-103542-5
1-103542-6
1-103542-7
1-103542-8
1-103542-9
2-103542-0
2-103542-2
2-103542-4
2-103542-9
3-103542-2
3-103542-9
For .093-.125
[.236-3.18]
Thick
PC Boards
103233-1
103233-2
103233-3
103233-4
103233-5
103233-6
103233-7
103233-8
103233-9
1-103233-0
1-103233-1
1-103233-2
1-103233-3
1-103233-4
1-103233-5
1-103233-6
1-103233-7
1-103233-8
1-103233-9
2-103233-0
—
2-103233-4
2-103233-9
—
3-103233-9
164
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
ACTION PIN Headers—Shrouded with .066 [1.68] End Dimension,
Double-Row, .100 x .100 [2.54 x 2.54] Centerline
.025 [0.64] Square
Straight Post (with Detent
Windows, for .093-.125
[.236-3.18] Thick PC Board)
.066
[1.68]
(2 Plc.)
.040
[1.02]
(3 Plc.)
B
C
.100 Typ.
[2.54]
.100
[2.54]
.200
Ref.
[5.08]
(Contact Area)
.320
[8.13]
.250
[6.35]
.400
[10.16]
.090
[2.29]
(2 Plc.)
A
E
.240
[6.10]
(2 Plc.)
D
Material and Finish:
Housing—Black thermoplastic, 94V-0
rated
Posts—Copper alloy, duplex plated
.000030 [0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
matte tin-lead on termination end, with
entire post underplated .000050
[0.00127] nickel
.440
[11.18]
.085
[2.16]
B
.100*
[2.54]
.100*
[2.54]
Related Product Data:
Mateable Connectors:
AMPMODU Board Mount
Receptacles—pages 193, 196, 197
AMPMODU Wire-Applied
Receptacles—pages 234-236
AMPMODU MT Receptacles—
pages 275, 276
ACTION PIN Posts—
pages 167, 168
Application Tooling—
page 169
Accessories:
Barrier Insert—page 221
Technical Documents (page 294):
See mating connector for applicable
product and application specifications
.090
[2.29]
See page 168 for
hole dimensions
Recommended PC Board Hole Layout
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
No. of
Pos.
6
8
10
12
14
16
18
20
26
30
34
40
50
60
A
.412 [10.46]
.512 [13.00]
.612 [15.54]
.712 [18.08]
.812 [20.62]
.912 [23.16]
1.012 [25.70]
1.112 [28.24]
1.412 [35.86]
1.612 [40.94]
1.812 [46.02]
2.112 [53.64]
2.612 [66.34]
3.112 [79.04]
B
.332 [8.43]
.432 [10.97]
.532 [13.51]
.632 [16.05]
.732 [18.59]
.832 [21.13]
.932 [23.67]
1.032 [26.21]
1.332 [33.83]
1.532 [38.91]
1.732 [43.99]
2.032 [51.61]
2.532 [64.31]
3.032 [77.01]
Dimensions
C
.200 [5.08]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.200 [30.48]
1.400 [35.56]
1.600 [40.64]
1.900 [48.26]
2.400 [60.96]
2.900 [73.66]
D
.106 [2.69]
.106 [2.69]
.206 [5.23]
.206 [5.23]
.306 [7.77]
.306 [7.77]
.406 [10.31]
.106 [2.69]
.106 [2.69]
.106 [2.69]
.106 [2.69]
.106 [2.69]
.106 [2.69]
.106 [2.69]
E
—
—
—
—
—
—
—
.806 [20.47]
1.106 [28.09]
1.306 [33.17]
1.506 [38.25]
1.806 [45.87]
2.306 [58.57]
2.806 [71.27]
Header
Part Nos.
102699-2
102699-3
102699-4
102699-5
102699-6
102699-7
102699-8
102699-9
1-102699-2
1-102699-4
1-102699-6
1-102699-9
2-102699-3
2-102699-8
5
165
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
ACTION PIN Headers—Shrouded with .150 [3.81] End Dimension,
Double-Row, .100 x .100 [2.54 x 2.54] Centerline
.025 [0.64] Square
Straight Post (with Detent
Windows, for .093-.125
[.236-3.18] Thick PC Board)
.150
[3.81]
(2 Plc.)
.040
[1.02]
(3 Plc.)
B
C
.100 Typ.
[2.54]
.100
[2.54]
.200
Ref.
[5.08]
(Contact Area)
.320
[8.13]
.250
[6.35]
.400
[10.16]
.090
[2.29]
(2 Plc.)
A
E
.240
[6.10]
(2 Plc.)
D
.440
[11.18]
Material and Finish:
Housing—Black thermoplastic, 94V-0
rated
Posts—Copper alloy, duplex plated
.000030 [0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
matte tin-lead on termination end, with
entire post underplated .000050
[0.00127] nickel
.085
[2.16]
Mateable Connectors:
AMPMODU MTE Receptacles—
pages 249,250
Flexible Film Connectors—
Catalog 82007
ACTION PIN Posts—
pages 167, 168
Application Tooling—
page 169
Accessories:
Barrier Insert—Page 221
Technical Documents (page 294):
See mating connector for applicable
product and application specifications
B
.100*
[2.54]
Related Product Data:
.090
[2.29]
.100*
[2.54]
See page 168 for
hole dimensions
Recommended PC Board Hole Layout
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
No. of
Pos.
6
8
10
12
14
16
18
20
24
26
30
34
40
50
60
A
.580 [14.73]
.680 [17.27]
.780 [19.81]
.880 [22.35]
.980 [24.89]
1.080 [27.43]
1.180 [29.97]
1.280 [32.51]
1.480 [37.59]
1.580 [40.13]
1.780 [45.21]
1.980 [50.29]
2.280 [57.91]
2.780 [70.61]
3.280 [83.31]
B
.500 [8.43]
.600 [10.97]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.400 [35.56]
1.500 [38.10]
1.700 [43.18]
1.900 [48.26]
2.200 [55.88]
2.700 [68.58]
3.200 [81.28]
Dimensions
C
.200 [5.08]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.100 [27.94]
1.200 [30.48]
1.400 [35.56]
1.600 [40.64]
1.900 [48.26]
2.400 [60.96]
2.900 [73.66]
.190
.190
.290
.290
.390
.390
.490
.190
.190
.190
.190
.190
.190
.190
.190
D
[4.83]
[4.83]
[7.37]
[7.37]
[9.91]
[9.91]
[10.31]
[4.83]
[4.83]
[4.83]
[4.83]
[4.83]
[4.83]
[4.83]
[4.83]
E
—
—
—
—
—
—
—
.890 [22.61]
1.090 [27.69]
1.190 [30.23]
1.390 [35.31]
1.590 [40.39]
1.890 [48.01]
2.390 [60.71]
2.890 [73.41]
Header
Part Nos.
1-102557-0
1-102557-1
102557-9
1-102557-2
1-102557-3
1-102557-4
1-102557-5
102557-2
1-102557-7
102557-3
102557-4
102557-5
102557-1
102557-6
102557-7
5
166
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
AMP ACTION PIN Press-Fit Posts
The Reliable Plated-Through Hole Interconnect
Solderless interconnections have been popular in electrical
and electronic applications with world-wide success for
decades. They provide reliable electrical and mechanical
stability and offer applied-cost savings across the board.
For PC board applications, AMP compliant ACTION PIN
posts provide these features:
■ Large gas-tight contact zone
■
High reliability due to stored energy
■
More resistant to damage to plated-through holes during
installation
■
Especially suited for multilayer PC boards
■
Less costly board manufacturing due to larger hole
tolerances compared to use of solid pins
■
Application can be made by end-user
■
Repairability—contact can be replaced in the same pin
location (two repairs)
■
Installation with no heat cycling of board
■
Permits mass insertion by minimizing forces needed to
insert pins as compared to solid pin press-fit application
■
Significant applied-cost savings in many applications
Since AMP compliant ACTION PIN posts do not have to be
soldered, problems associated with solder are eliminated,
such as:
■
Faulty solder joints
■
Solder fumes; contaminants are deposited on the
contacts
■
Solder spots; short circuits between printed circuits
■
Flux residuals
■
Thermal strain on printed circuit boards and
components
■
Degasing of plated-through holes
Principle of the AMP Compliant ACTION PIN Post
When an AMP compliant ACTION PIN post is inserted
into a plated-through hole, two spring members are
compressed, exerting force against the hole for a gas-tight
connection. The diameter of the hole is smaller than the
diagonal size of the pin (see cross-section illustration below).
The beam characteristics of the pin are designed so that a
plastic, as well as an elastic, deformation takes place during
insertion. The two spring members compress to different
degrees to accommodate hole tolerances. The compliant
pin also reduces strain on the board. With a rigid pin, the
elastic strain energy is stored entirely in the board, leading
to damage of the plated-through holes. With the AMP
compliant ACTION PIN post, the residual force of the
elastic deformation maintains stored energy to produce a
tight contact zone between the pin and the plated-through
hole. This maintains long-term electrical and mechanical
reliability of the interconnection.
Solderless press-fit interconnections using AMP compliant
pins are primarily integrated in, but not limited to, backplanes.
Solderless press-fit interconnections are used in racks,
especially where connectors must be fixed on the solder
side of the PC board and/or component side. In these
applications, the holes for AMP ACTION PIN post connectors
are covered during the soldering process and press-fitting
is performed after soldering.
Other applications for AMP ACTION PIN post
interconnections include PC boards that incorporate
components using surface mount technology (SMT). Here,
too, press-fit interconnections can be applied after
soldering, thus eliminating complications associated with
connectors suitable for surface mounting.
Minimum
Hole Dia.
.037 [0.94]
Maximum
Hole Dia.
.043 [1.09]
5
Cross-Section Area of AMPACTIONPIN Press-Fit Post in Printed
Circuit Board Holes
167
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
AMP ACTION PIN Press-Fit Posts (Continued)
ACTION PIN posts provide a more reliable press-fit
connection. Localized pressure in the interface area for
oxide break-through and prevents corrosion better in many
of the harshest environments to provide a reliable
connection virtually every time. Also, radial and axial
distortion are controlled to meet today’s standards for
multilayer board applications.
➀
PC Board Thickness
ACTION PIN posts designed
for use in a variety of PC
board thicknesses. However,
certain ACTION PIN posts
are to be used in specific
ranges of board thicknesses.
To promote optimum
performance, the
recommended board
thicknesses provided with
the connector being used
must be followed.
➀ Annular Ring (See Note)
➁ Drilled Hole
➂ Copper Thickness
➃ Tin-Lead Thickness
➄ Plated-Through Hole
➂
➃
➄
➁
5
ACTION PIN Post/PC Board Applications
Plating Thicknesses
ACTION PIN Contact
Drilled Hole
Material Thickness
Diameter➁
Copper➂*
Tin-Lead➃
.025 [0.64]
.0453±.001 [1.151±0.03]
.001-.003 [0.03-0.08] .0003 [0.008]Min.
*Maximum hardness of copper layer is 150 Knoop.
**Radial hole distortion.
Note: Recommended annular ring diameter is hole diameter plus .020 [0.51].
Plated-Through
Hole Diameter➄
.037-.043 [0.94-1.09]
Distortion Specification*
Average
Maximum
.0015 [0.038]
.002 [0.05]
168
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Application Tooling for AMPMODU Headers with ACTION PIN Posts
Single-Row Connector
Seating Tools
ACTION PIN Post
Replacement Tooling
Tooling Assembly No. 91171-1
is used to install single-row
AMPMODU headers with
ACTION PIN posts into
PC boards.
Rear Insertion/Extraction Tool
No. 265871-7 (Ref. 408-2636)
Includes:
Impact Tool No. 380392-8
Removal Tool No. 265964-1
Replacement Tip No. 308554-1
Pin headers with
ACTION PIN posts allow
high speed, solderless
back-plane construction
through reliable press-fit
application. Press fitting
connectors to printed circuit
boards requires special
seating tools which transfer
application force directly
to the contacts.
Force applied to the tool
to seat the connectors can
be provided by the AMP
seating machines shown
on this page.
Double-Row Connector
Seating Tools
Header Size
Tool
(No. of Pos.) Assembly No.
4
91170-1
6
91170-1
8
91170-2
12
91170-5
14
91170-6
16
91170-7
20
91170-9
24
1-91170-1
30
1-91170-4
36
1-91170-7
40
1-91170-9
50
2-91170-4
60
2-91170-9
80
3-91170-2
96
3-91170-5
100
3-91170-6
120
3-91170-8
140
4-91170-0
200
4-91170-2
Triple-Row Connector
Seating Tools
Header Size
Tool
(No. of Pos.) Assembly No.
96
91169-8
105
91169-6
120
91169-7
150
91169-3
195
91169-2
204
91169-1
210
91169-5
300
91169-9
connector pressed is
monitored to assure that
maximum force is not
exceeded and minimum
force is met. Each system
controls force, height and
speed to allow termination
of the pressing cycle by
force or height parameters.
Complete SPC data is
available as each connector
press cycle is monitored
and stored. ASG presses
are available in both semiautomatic and fully
automatic inline systems.
For tooling information,
call the Tyco Electronics
Automation Group
1-215-657-6202.
ASG Servo Electric Presses
BMEP-5T
Tyco Electronics offers a
wide range of servo-electric
presses for the application
of press-fit connectors.
Systems are available with
varying force capacity,
board size capacity and
process capability. Each
system features real-time
force feedback and PC
control to allow the highest
level of control and
traceability. Every
Press Model
BMEP 3T
BMEP 5T
MEP 6T
AP3
MEP 12T
AEP 12T
AP3
Description
Semi-automatic, benchtop
servo-electric press
Semi-automatic, benchtop
servo-electric press
Semi-automatic, stand-alone
servo-electric press
Semi-automatic, stand-alone
servo-electric press
Automatic servo-electric press
Fully automatic pick,
place and press
Please see the matrix below
and contact Tyco
Electronics Automation
Group at 1-215-657-6202 for
assistance in understanding
which system will best meet
your needs.
Tyco Electronics
Part Number
Max Pressing Force
tons [kN]
Max Board Size (L x W)
in [mm]
1585697-1
3 [26.7]
18 x 24 [460 x 610]
1585696-1
5 [44.5]
18 x 24 [460 x 610]
1585699-1
6 [53.4]
24 x 36 [610 x 914]
1585698-1
12 [106.8]
30 x 36 [ 762 x 914]
1-1399600-7
12 [106.8]
36 x 48 [914 x 1219]
8 [71.2]
18 x 30 [ 457 x 762]
1585280-1
5
169
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Application Tooling for Post Insertion
Comp-U-Sertor II Insertion Machine No. 122300-1
This machine has a compact, microprocessor-controlled
X-Y positioning table for inserting a variety of AMP posts,
sockets and receptacles at rates up to 14,000 contacts per
hour. It is programmed and operated with an easy-to-use,
menu-driven touchscreen. Programs are stored in a
battery-backed Random Access Memory. A 3.5” floppy
disk drive is provided for off-line programming and storage.
Insertion heads are interchangeable. The insertable area
is 12 x 18 [305 x 457]. The power requirement is 120 VAC,
50-60 Hz, 7 A; the air requirement is 90 psi [6.21 bar]
at 2-15 scfm [0.00094-0.00708 m3/s], depending upon
application.
Modular Insertion System Bench
Machine No. 217600-1
This machine uses AMP insertion heads to install a variety
of printed circuit board products at rates of 2,000 per hour.
The printed circuit board is placed in a Board Holding
Fixture which is attached to a two-hand controlled
mechanism. The operator moves the board over the
machine anvil; a switch in the anvil actuates the machine
when the printed circuit board is placed on the anvil. A
spotlight illuminates the insertion area.
Consult Tyco Electronics for further information on this
machine and the insertion heads.
For further information, request Tyco Electronics Customer
Manual 409-5863.
Photo 98731
Photo 96187-1
P300 Automatic Insertion Machine
The P300 is a fully automatic insertion machine for
processing reeled press-fit and thru-hole components into
PCBs. It is available as either a stand-alone unit or as an
inline system. Boards up to 15.5” x 23.5” [400 x 600] can
be processed and are positioned by an X\Y table. Each
contact is seated in the PCB via a product specific
insertion head. An optional automatic tool changer system
allows up to 3 different insertion heads to be used. A multitasking control unit controls and monitors the entire system.
Optional insertion force monitoring allows the verification of
every component applied for quality assurance. A wide
range of optional equipment is available for further
performance and flexibility enhancement.
5
Please consult Tyco Electronics for further information on
this machine.
170
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
METRIC
AMP ACTION PIN Stacking Connector System
(Non-Intermateable with AMPMODU Connectors)
Product Facts
■
Can stack multiple printed
circuit boards without the
need of a mother board
■
Connect bus lines in the
shortest possible distance
■
Receptacle assembly has
ACTION PIN posts for
solderless board mounting
■
Can be mounted onto the
board simply by press
fitting with Mini-Press
■
Receptacle assembly is
easy to service and replace
(up to 2 times)
■
Receptacle contacts are
of fork design to mate with
posts at two points. No
danger of scooping at
mating/ unmating
■
Stacking dimensions are
13.4 [.528] or 19.0 [.748]
when using receptacle
assemblies together, and
13.9 [.547] or 19.5 [.768]
when using a combination
of receptacle and post
header assemblies
■
Accepts 1.6 [.062] thick
boards
■
Housing provided with
polarization to help prevent
mismating
■
Housing made of chemicalresistant glass-filled PBT,
black in color
■
Contacts are of copper alloy
material with high spring
characteristics, gold-overnickel plated
■
Post hood available to
protect the post portion of
receptacle contacts. Can be
selected depending on
stacking dimensions
■
Connectors available in
sizes of 26, 30, 34, 40, 50
and 60 positions
■
Product specification:
108-5197
AMP ACTION PIN Stacking
Connectors are a family of
two-piece connectors used to
stack multiple printed circuit
boards in parallel. They have
been developed to provide
a more reliable and
economical means of
compact wiring and highdensity packaging inside a
variety of electronic
equipment.
bus lines in the shortest
possible distance without
the need of a mother board,
thus permitting effective
utilization of space above
the board; compared with
other methods of jumper
connection using cable
connectors, they make the
overall board layout more
clean and straight for
compact packaging.
The connectors have many
advanced features: they
can be used to connect
Contacts are on 2.54 x 2.54
[.100 x .100] grid. The
connectors are available in
sizes of 26, 30, 34, 40, 50
and 60 positions. AMP
ACTION PIN Stacking
Connectors consist of a
receptacle assembly, a
mating post header and
a post hood to protect the
post portion of the receptacle
assembly.
A complete description
of the AMP ACTION PIN
Stacking Connectors is
presented on the following
page (172).
5
171
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
METRIC
AMP ACTION PIN Stacking Connector System
(Non-Intermateable with AMPMODU Connectors) (Continued)
Receptacle Assembly
The receptacle assembly
features reliability and
economy characteristic of
this product line.
The mating portion of its
built-in receptacle contacts
is of a fork design, highly
resilient and help prevents
damage to contacts by
scooping at
mating/unmating.
On the board mount side of
the assembly are 0.55 [.022]
square ACTION PIN posts.
No soldering is required to
mount the assembly on the
board, the posts being simply,
press fit into the board’s
0.825 [.032] diameter holes.
Two types of receptacle
assembly are available; one
is used with an outermost
board and the other with
intermediary boards. A
solder version is also
available for the outer
board mount assembly.
which an outer board mount
receptacle assembly is
applied. The post header is
preloaded with 0.50 [.022]
square soldering posts.
These posts are protected by
the side walls of the housing.
Post Hood
When using the intermediary
board mount receptacle
assembly, this post hood is
used to protect the post
portion of the assembly.
The post hood is available
in two types: one with the
housing height of 10.0 [.394]
and the other with the housing
height of 15.7 [.618].
They can be selected,
depending on stacking
dimensions.
Stacking dimensions
provided by this connector
line are as follows:
When the outer board
receptacle and intermediary
board receptacle
assemblies are used
13.4 [.528] or 19.0 [.748].
When the intermediary
board receptacle assembly
and the post header
assembly are used
13.9 [.547] or 19.5 [.768].
Post Header
The post header is mounted
onto the outer board on the
other side of the board to
Typical Application
Receptacle Assembly
(For outer board)
(ACTIONPIN Type)
Part No.: 173145
Post Hood
Part No.: 173144
Receptacle Assembly
(For inner board)
(ACTIONPIN Type)
Part No.: 173145
Post Header
(Solder Type)
Part No.: 173146
PCBoard
1.6
[.062]
thickness
Stacking Dim.
13.4 [.528], 19.0 [.748]
Receptacle + Receptacle
PCBoard
1.6
[.062]
thickness
Stacking Dim.
13.9 [.547], 19.5 [.768]
Receptacle + Post
PCBoard
1.6
[.062]
thickness
5
172
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
METRIC
AMPMODU Interconnection System
Post Hood (Non-Intermateable with AMPMODU Connectors)
A
B
2.54
[.100]
Pitch X
The post hood, mounted
onto the post of the
intermediary receptacle
assembly, protects the post
and serves as a header
assembly when stacking
several boards.
Y
0.75
[.030]
Hole Dia.
Y
8.9
[.350]
X
Section X-X
2.54
[.100]
0.6*
[.024]
Hole Dia.
*
10.0
[.394] C
Material:
Black glass-filled PBT, 94V-0 rated
Section Y-Y
Acceptable
Post Length
For
8.9 [.350]
or
10.9 [.429]
(For StackingDimension)
13.4 [.528]
For
14.5 [.571]
or
16.5 [.650]
(For Stacking Dimension)
19.0 [.748]
No. of
Pos.
26
30
34
40
50
60
26
30
34
A
38.1 [1.500]
43.2 [1.700]
48.3 [1.900]
55.9 [2.200]
68.6 [2.700]
81.3 [3.200]
38.1 [1.500]
43.2 [1.700]
48.3 [1.900]
40
55.9 [2.200]
Dimensions (See Note.)
B
30.48 [1.200]
33.56 [1.321]
40.64 [1.600]
48.26 [1.900]
65.96 [2.597]
73.66 [2.900]
30.48 [1.200]
33.56 [1.321]
40.64 [1.600]
48.26 [1.900]
50
68.6 [2.700]
65.96 [2.597]
60
81.3 [3.200]
73.66 [2.900]
*0.60 [.024] dia. applies to 16 holes on both sides, except Part No. 3-173144-8.
C
10.0 [.394]
10.0 [.394]
10.0 [.394]
10.0 [.394]
10.0 [.394]
10.0 [.394]
15.6 [.614]
15.6 [.614]
15.6 [.614]
15.6 [.614]
15.6 [.614]
15.6 [.614]
Post Hood
Part Nos.
1-173144-1
173144-2
1-173144-2
173144-3
173144-4
173144-5
1-173144-3
173144-7
1-173144-4
173144-8
3-173144-8*
173144-9
1-173144-0
5
173
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
METRIC
AMPMODU Interconnection System
Receptacle Assemblies with ACTION PIN Posts and Solder Posts
(Non-Intermateable with AMPMODU Connectors)
Receptacle Assembly for
Outer Board (With 0.55
[.022] Square Post)
2.54
[.100]
A
Y
0.5
[.020]
Y
7.6
[.300]
Blank
width
0.69**
[.027]
16.5
[.650]
B
2.54
[.100]
Pitch
3.7
[.146]
X
6.4
[.252]
Contact
Area
3.7
[.146]
6.4
[.252]
2.54
[.100]
Contact
Area
11.9
[.469]
0.5
[.020]
Material and Finish:
ACTION
PIN
Area
Mating
Area
X
Housing—Black glass-filled PBT,
94V-0 rated
Contacts—Copper alloy, plated
0.00020 [.000008] gold on contact area
and post mating area, gold flash on
ACTION PIN tail or 0.00100-0.00254
[.000040-.000100] tin-lead on solder
tail, with entire contact underplated
0.00130 [.000050] nickel
L
2.54
[.100]
L
2.54
[.100]
2.54 Pitch
[.100]
B
Section X-X
Solder Type
Section X-X
ACTION PIN
Type
Section Y-Y
Application Tooling shown on
page 179.
0.5
[.020]
2.54±0.1
[.100±.004]
2.54±0.1
[.100±.004]
±0.1
B [±.004]
Recommended PC Board Hole Layout
PC Board Mounting
Dimensions
Thru hole
plating Copper
0.02500-0.05000
[.000984-.001968]
Land dia.
1.4 Min.
[.055]
Finished
hole dia.
0.825±0.05
[.032±.002]
For Outer Board
Board
Thick
1.6
[.062]
PCB drill hole
0.9±0.025
[.035±.0001]
Type
Post
Length
L
ACTIONPIN
Post
4.2*
Solder Post
4.2*
ACTION PINPost
Board
Thick
1.6
[.062]
Finished
hole dia.
0.8±0.05
[.031±.002]
5
No. of
Pos.
Dimensions (See Note.)
A
B
26
30
34
40
50
60
26
30
34
40
50
35.6 [1.402]
40.6 [1.598]
45.7 [1.799]
53.3 [2.098]
66.0 [2.598]
78.7 [3.098]
35.6 [1.402]
40.6 [1.598]
45.7 [1.799]
53.3 [2.098]
66.0 [2.598]
30.48 [1.200]
35.56 [1.400]
40.64 [1.600]
48.26 [1.900]
60.96 [2.400]
73.66 [2.900]
30.48 [1.200]
35.56 [1.400]
40.64 [1.600]
48.26 [1.900]
60.96 [2.400]
60
78.7 [3.098]
73.66 [2.900]
Receptacle
Assembly
Part Nos.
1-173145-7
173145-2
1-173145-8
173145-3
173145-4
173145-5
2-173145-8
2-173145-4
2-173145-9
2-173145-5
2-173145-6
2-173145-7
3-173145-0**
**After mounted receptacle assembly is on board, dimension of extrude length from board is 2.6 [.102].
**Post Length = 17.0 [.669] , Blank Width = 0.69 [.027] (see above figure) (finished hole dia. = 1.0 [.039]).
SolderPost
174
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
METRIC
AMPMODU Interconnection System
Receptacle Assemblies with ACTION PIN Posts
(Non-Intermateable with AMPMODU Connectors)
Receptacle Assembly for
Inner Board (With 0.55
[.022] Square Post)
2.54
[.100]
A
Y
Y
7.6
[.300]
B
2.54
[.100]
Pitch
3.7
[.146]
X
Housing—Black glass-filled PBT,
94V-0 rated
Contacts—Copper alloy, plated
0.00020 [.000008] gold on contact area
and post mating area, gold flash on
ACTION PIN tail or 0.00100-0.00254
[.000040-.000100] tin-lead on solder
tail, with entire contact underplated
0.00130 [.000050] nickel
0.5
[.020]
Mating
Area
Section Y-Y
PCB drill hole
0.9±0.025
[.035±.0001]
2.54±0.1
[.100±.004]
±0.1
B [±.004]
Recommended PC Board Hole Layout
For Inner Board
Finished
hole dia.
0.825±0.05
[.032±.002]
Section X-X
2.54±0.1
[.100±.004]
Board
Thick
1.6
[.062]
L
2.54
[.100]
2.54 Pitch
[.100]
B
PC Board Mounting
Dimensions
Land dia.
1.4 Min.
[.055]
ACTION
PIN
Area
X
Application Tooling shown on
page 179.
Thru hole
plating Copper
0.02500-0.05000
[.000984-.001968]
Contact
Area
11.9
[.469]
Material and Finish:
6.4
[.252]
Receptacle
Assembly
Part Nos.
26
35.6 [1.402]
30.48 [1.200]
3-173145-6
30
40.6 [1.598]
35.56 [1.400]
3-173145-2
34
45.7 [1.799]
40.64 [1.600]
3-173145-7
8.9
3-173145-3
40
53.3 [2.098]
48.26 [1.900]
.350
3-173145-1**
50
66.0 [2.598]
60.96 [2.400]
3-173145-4
60
78.7 [3.098]
73.66 [2.900]
3-173145-5
13.4 [.528]
26
35.6 [1.402]
30.48 [1.200]
1-173145-9
30
40.6 [1.598]
35.56 [1.400]
173145-7
10.9
34
45.7 [1.799]
40.64 [1.600]
2-173145-0
.429
40
53.3 [2.098]
48.26 [1.900]
173145-8
50
66.0 [2.598]
60.96 [2.400]
173145-9
60
78.7 [3.098]
73.66 [2.900]
1-173145-0
**Contact area and post mating area: 0.00050 [.000020] min. gold over 0.00130 [.000050] min. nickel plated.
Stacking
Dimensions
Post
Length
L
No. of
Pos.
Dimensions (See Note.)
A
B
5
175
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
METRIC
Receptacle Assemblies with ACTION PIN Posts
(Non-Intermateable with AMPMODU Connectors) (Continued)
For Inner Board
Receptacle
Assembly
Part Nos.
26
35.6 [1.402]
30.48 [1.200]
4-173145-2
30
40.6 [1.598]
35.56 [1.400]
3-173145-8
34
45.7 [1.799]
40.64 [1.600]
4-173145-3
14.5 [.571]
40
53.3 [2.098]
48.26 [1.900]
3-173145-9
50
66.0 [2.598]
60.96 [2.400]
4-173145-0
60
78.7 [3.098]
73.66 [2.900]
4-173145-1
19.0 [.748]
26
35.6 [1.402]
30.48 [1.200]
2-173145-1
30
40.6 [1.598]
35.56 [1.400]
1-173145-2
34
45.7 [1.799]
40.64 [1.600]
2-173145-2
16.5 [.650]
40
53.3 [2.098]
48.26 [1.900]
1-173145-3
50
66.0 [2.598]
60.96 [2.400]
1-173145-4
60
78.7 [3.098]
73.66 [2.900]
1-173145-5
**Contact area and post mating area: 0.00050 [.000020] min. gold over 0.00130 [.000050] min. nickel plated.
Stacking
Dimensions
Post
Length
L
No. of
Pos.
Dimensions (See Note.)
A
B
5
176
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
METRIC
AMPMODU Interconnection System
Post Headers with Solder Posts
(Non-Intermateable with AMPMODU Connectors)
Post Header
(With 0.55 [.022] Square
Post)
A
2.54
[.100]
B
2.54
[.100]
Pitch
Y
Y
8.9
[.350]
X
8.5
[.335]
L
C
Material and Finish:
Housing—Black glass-filled PBT,
94V-0 rated
Posts—Copper alloy, plated 0.00020
[.000008] gold on contact area,
0.00100-0.00150 [.000040-.000060]
tin-lead on solder tail, with entire post
underplated 0.00130 [.000050] nickel
X
3.7
[.146]
0.5
[.020]
2.54
[.100]
Pitch
B
Section X-X
Section Y-Y
PC Board Mounting
Dimensions
Finished
hole dia.
0.8±0.06
[.031±.002]
Board
Thick
1.6
[.062]
2.54±0.1
[.100±.004]
2.54±0.1
[.100±.004]
±0.1
B [±.004]
Recommended PC Board Hole Layout
Stacking
Dimensions
Post
Length
L
5.8 [.228]
13.9 [.547]
7.8 [.307]
Dimensions (See Note.)
No. of
Pos.
A
B
C
26
30
34
38.1 [1.500]
43.2 [1.700]
48.3 [1.900]
30.48 [1.200]
35.56 [1.400]
40.64 [1.600]
10.5 [.413]
10.5 [.413]
10.5 [.413]
40
55.9 [2.200]
48.26 [1.900]
10.5 [.413]
50
60
26
30
34
68.6 [2.700]
81.3 [3.200]
38.1 [1.500]
43.2 [1.700]
48.3 [1.900]
60.96 [2.400]
73.66 [2.900]
30.48 [1.200]
35.56 [1.400]
40.64 [1.600]
10.5 [.413]
10.5 [.413]
10.5 [.413]
10.5 [.413]
10.5 [.413]
40
55.9 [2.200]
48.26 [1.900]
10.5 [.413]
50
68.6 [2.700]
60.96 [2.400]
10.5 [.413]
60
81.3 [3.200]
73.66 [2.900]
10.5 [.413]
*Contact mating area: 0.00050 [.000020] min. gold over 0.00130 [.000050] min. nickel plated.
Part Nos. of
Post Header
Assembly
3-173146-5
3-173146-1
3-173146-6
3-173146-2
3-173146-0*
3-173146-3
3-173146-4
2-173146-1
1-173146-7
2-173146-2
1-173146-8
4-173146-3*
1-173146-9
2-173146-0
5
177
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Post Headers with Solder Posts
(Non-Intermateable with AMPMODU Connectors) (Continued)
Stacking
Dimensions
Post
Length
L
No. of
Pos.
A
Dimensions (See Note.)
B
C
Part Nos. of
Post Header
Assembly
4-173146-1
3-173146-7
4-173146-2
3-173146-8
3-173146-9
4-173146-0
2-173146-8
2-173146-4
2-173146-9
2-173146-5
2-173146-6
2-173146-7
26
38.1 [1.500] 30.48 [1.200] 16.1 [.634]
30
43.2 [1.700] 35.56 [1.400] 16.1 [.634]
34
48.3 [1.900] 40.64 [1.600] 16.1 [.634]
11.4 [.449]
40
55.9 [2.200] 48.26 [1.900] 16.1 [.634]
50
68.6 [2.700] 60.96 [2.400] 16.1 [.634]
60
81.3 [3.200] 73.66 [2.900] 16.1 [.634]
19.5 [.768]
26
38.1 [1.500] 30.48 [1.200] 16.1 [.634]
30
43.2 [1.700] 35.56 [1.400] 16.1 [.634]
34
48.3 [1.900] 40.64 [1.600] 16.1 [.634]
13.4 [.528]
40
55.9 [2.200] 48.26 [1.900] 16.1 [.634]
50
68.6 [2.700] 60.96 [2.400] 16.1 [.634]
60
81.3 [3.200] 73.66 [2.900] 16.1 [.634]
*Contact mating area: 0.00050 [.000020] min. gold over 0.00130 [.000050] min. nickel plated.
Note: Dimensions are expressed in millimeters; values in brackets are inch equivalents. Chart dimensions are in
millimeters over inches.
5
178
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Application Tooling for AMP ACTION PIN Stacking Connectors
AMP Mini-Press
No. of
Pos.
40
50
60
1. Insert connector into the board tentatively (Be sure that
connector is in the right direction).
2. Attach insertion support plate to the leg portion of
connector from below.
3. Set insertion support plate in place by butting it against
Mini-Press platform.
4. By pressing Mini-Press handle down, rest the press-fit
jig against connector.
5. Press handle down gently and insert connector into
the board.
6. Now connector has been mounted to the board
securely.
Part No.
1-758030-1
1-758030-2
1-758030-3
The part numbers above
include the Mini-Press unit,
insertion support plate and
press-fit jig.
Mini-Press Unit
Part No. 1-758030-3
When ordering a press-fit jig
only, consult the table below.
Press-fit Jig (separate order)
No. of
Pos.
26
30
34
40
50
60
Part No.
907459-1
907459-2
907459-3
907459-4
907459-5
907459-6
Also, optional insertion
support plates are
obtainable by separate
order to meet your specific
requirements for improved
board handling.
5
Insertion Support Unit
(Option)
179
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
.025 [0.64] Square Posts
.010
[0.25]
Typ.
CL
of Star
B
Bandolier Posts (Uninsulated)
.100*
[2.54]
.010
[0.25]
.015
[0.38]
.070
[1.78]
.080
[2.03]
Bandolier
C
.100
[2.54]
Post
±.002
D [±0.05] Dia.
Recommended
Plated
Hole Size
A
.100
[2.54]
Material and Finish:
Bandolier—Brass
Posts—Phosphor bronze, plated as follows:
Plating A—Duplex plated .000030
[0.00076] gold on contact area, .000100.000200 [0.00254-0.00508] tin-lead on
solder area, with entire post underplated
.000050 [0.00127] nickel
Plating B—Duplex plated .000015
[0.00038] gold on contact area, .000100.000200 [0.00254-0.00508] tin-lead on
solder area, with entire post underplated
.000050 [0.00127] nickel
Plating C—.000100-.000200 [0.002540.00508] tin-lead over .000050 [0.00127]
nickel on entire post
Related Product Data:
Mateable Connectors—Refer
to the Mating Post Selection Guide
(page 89)
.020
[0.51]
Typ.
Dimensions
B
.353 [8.97]
.318 [8.08]
C
Customer
Board
.048+.006
.060 -.003
1.22+0.15
-0.08
.097
Max.
[2.46]
[
A
PC Pad
]
Post Plating/Part Nos.
Plating A Plating B Plating C
D
Bandolier
Insertion Head
.071 [1.80]
.071 [1.80]
.424 [10.77] .034 [0.86]
103577-1 1-103577-3 1-103577-7
904592-1
.389 [9.88] .034 [0.86]
103577-3 1-103577-5 1-103577-9
904591-1
.034 [0.86]
103577-5 1-103577-7 1-103577-1
904590-1
.270 [6.86]
.071 [1.80] .341 [8.66]
.031 [0.79]
146079-1
—
—
—
.183 [4.65]
.097 [2.46] .280 [7.11] .031 [0.79]
—
—
1-146079-3
—
Notes: 1. Posts can be applied using Hand Tool 91419-1.
*Point of measurement for plating thickness.
Notes: 2. Approximate posts per reel—30,000.
3. The Bandolier Insertion head can be used on the Comp-U-Sertor II machine or the Modular Insertion
System Bench machine (see page 170).
Accessories:
End Shrouds—page 220
Application Tooling—page 170
.100*
[2.54]
Technical Documents (page 294):
See mating connector for applicable
product and application specifications.
Strip Form Posts (Uninsulated)
Localized
Gold Plate
Area
A
C
.042
[1.07]
Localized
Tin-Lead
Plate Area
B
.020
Typ.
[0.51]
Material and Finish:
Posts—Phosphor bronze, plated as follows:
Plating A—Duplex plated .000030
[0.00076] gold on contact area, .000100.000200 [0.00254-0.00508] tin-lead on
solder area, with entire post underplated
.000050 [0.00127] nickel
Plating B—Duplex plated .000015
[0.00038] gold on contact area, .000100.000200 [0.00254-0.00508] tin-lead on
solder area, with entire post underplated
.000050 [0.00127] nickel
Plating C—.000030 [0.00076] gold over
.000050 [0.00127] nickel on entire post
Plating D—.000100-.000200 [0.002540.00508] tin-lead over .000050 [0.00127]
nickel on entire post
5
.036±.002
[0.91±0.05]
Recommended
Hole Size
A
.210 [5.33]
.278 [7.06]
.278 [7.06]
.278 [7.06]
.318 [8.08]
PC Pad
Customer
Board
.050
[1.27]
Dimensions
B
C
.227 [5.77]
.437 [11.10]
.165 [4.19]
.443 [11.25]
.284 [7.21]
.562 [14.27]
.738 [18.75] 1.016 [25.81]
.165 [4.19]
.483 [14.27]
.100
[2.54]
Plating A
—
87623-1
—
—
—
Post Plating/Part Nos.
Plating B Plating C
—
1-87878-6
87623-4 1-87022-1
—
1-87022-3
—
1-87022-2
—
4-87022-1
Plating D
1-87022-4
1-87022-0
—
1-87022-4
4-87022-3
Post/Tab
Insertion Head
—
904507-1
—
—
—
Notes: 1. Approximate Posts per reel—20,000.
*Point of measurement for plating thickness.
Notes: 2. Other post lengths are available, consult Tyco Electronics.
Notes: 3. The Post/Tab Insertion Head can be used on the Comp-U-Sertor II machine or the Modular Insertion
System Bench machine (see page 170).
180
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
AMPMODU .025 [0.64] Square Continuous Posts
Features of .025 [0.64]
Square Continuous Posts
Brass drawn wire for posts
■ .400 to 1.000 [10.16 to
25.40] overall pin length
(.010 [0.25] increments)
■ Plating Options:
Tin-Lead
15µ in. gold
30µ in. gold
■ Star feature also available
■
Benefits
Less expensive than
bandolier style posts
■ Can be placed on printed
circuit boards at any desired
centerline
■ Less scrap material (no
carrier strip)
■
Photo 110290
Technical Documents (page 294):
Application Specification
114-13011
Photo 109148-1
Tyco Electronics now offers
AMPMODU .025 [0.64]
Square Continuous Posts.
These posts can be used
instead of the original posts
that come on a bandolier
style carrier strip. These
posts are on a reel, but the
posts are ‘notched’ at the
desired length (no carrier
strip is needed). This
feature allows more
versatility by providing
posts lengths from .400 to
1.000 [10.16 to 25.40],
available in increments of
.010 [0.25].
wrap applications or mated
to a receptacle.
The current rating is 3 amps.
The posts are available
plated with tin lead, 15µ in.
gold, or 30µ in. gold. Other
platings are available upon
request.
The application tooling
needed is a modular head
(Part Number 904641-1)
which is placed on the AMP
Comp-U-Sertor machine
(Part Number 122300-1.)
The posts are brass drawn
wire and are inserted into a
printed circuit board via
application tooling at any
centerline configuration.
They can be used for wire
5
181
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
AMPMODU .025 [0.64] Square Continuous Posts (Continued)
Pre-Plated Tin
Part Number
Square
Square with Star
147333-1
147433-1
147333-2
147433-2
147333-3
147433-3
147333-4
147433-4
147333-5
147433-5
147333-6
147433-6
147333-7
147433-7
147333-8
147433-8
147333-9
147433-9
1-147333-0
1-147433-0
1-147333-1
1-147433-1
1-147333-2
1-147433-2
1-147333-3
1-147433-3
1-147333-4
1-147433-4
1-147333-5
1-147433-5
1-147333-6
1-147433-6
1-147333-7
1-147433-7
1-147333-8
1-147433-8
1-147333-9
1-147433-9
2-147333-0
2-147433-0
2-147333-1
2-147433-1
Description
Post Length
0.400 [10.16]
0.410 [10.41]
0.420 [10.67]
0.430 [10.92]
0.440 [11.18]
0.450 [11.43]
0.460 [11.68]
0.470 [11.94]
0.480 [12.19]
0.490 [12.45]
0.500 [12.70]
0.510 [12.95]
0.520 [13.21]
0.530 [13.46]
0.540 [13.72]
0.550 [13.97]
0.560 [14.22]
0.570 [14.48]
0.580 [14.73]
0.590 [14.99]
0.600 [15.24]
Part Number
Square
Square with Star
2-147333-2
2-147433-2
2-147333-3
2-147433-3
2-147333-4
2-147433-4
2-147333-5
2-147433-5
2-147333-6
2-147433-6
2-147333-7
2-147433-7
2-147333-8
2-147433-8
2-147333-9
2-147433-9
3-147333-0
3-147433-0
3-147333-1
3-147433-1
3-147333-2
3-147433-2
3-147333-3
3-147433-3
3-147333-4
3-147433-4
3-147333-5
3-147433-5
3-147333-6
3-147433-6
3-147333-7
3-147433-7
3-147333-8
3-147433-8
3-147333-9
3-147433-9
4-147333-0
4-147433-0
4-147333-1
4-147433-1
4-147333-2
4-147433-2
Description
Post Length
0.610 [15.49]
0.620 [15.75]
0.630 [16.00]
0.640 [16.26]
0.650 [16.51]
0.660 [16.76]
0.670 [17.02]
0.680 [17.27]
0.690 [17.53]
0.700 [17.78]
0.710 [18.03]
0.720 [18.29]
0.730 [18.54]
0.740 [18.80]
0.750 [19.05]
0.760 [19.30]
0.770 [19.56]
0.780 [19.81]
0.790 [20.07]
0.800 [20.32]
0.810 [20.57]
Part Number
Square
Square with Star
4-147333-3
4-147433-3
4-147333-4
4-147433-4
4-147333-5
4-147433-5
4-147333-6
4-147433-6
4-147333-7
4-147433-7
4-147333-8
4-147433-8
4-147333-9
4-147433-9
5-147333-0
5-147433-0
5-147333-1
5-147433-1
5-147333-2
5-147433-2
5-147333-3
5-147433-3
5-147333-4
5-147433-4
5-147333-5
5-147433-5
5-147333-6
5-147433-6
5-147333-7
5-147433-7
5-147333-8
5-147433-8
5-147333-9
5-147433-9
6-147333-0
6-147433-0
6-147333-1
6-147433-1
Description
Post Length
0.820 [20.83]
0.830 [21.08]
0.840 [21.34]
0.850 [21.59]
0.860 [21.84]
0.870 [22.10]
0.880 [22.35]
0.890 [22.61]
0.900 [22.86]
0.910 [23.11]
0.920 [23.37]
0.930 [23.62]
0.940 [23.88]
0.950 [24.13]
0.960 [24.38]
0.970 [24.64]
0.980 [24.89]
0.990 [25.15]
1.000 [25.40]
Pre-Plated 15µ in. Gold
Part Number
Square
Square with Star
147334-1
147434-1
147334-2
147434-2
147334-3
147434-3
147334-4
147434-4
147334-5
147434-5
147334-6
147434-6
147334-7
147434-7
147334-8
147434-8
147334-9
147434-9
1-147334-0
1-147434-0
1-147334-1
1-147434-1
1-147334-2
1-147434-2
1-147334-3
1-147434-3
1-147334-4
1-147434-4
1-147334-5
1-147434-5
1-147334-6
1-147434-6
1-147334-7
1-147434-7
1-147334-8
1-147434-8
1-147334-9
1-147434-9
2-147334-0
2-147434-0
2-147334-1
2-147434-1
Part Number
Square
Square with Star
2-147334-2
2-147434-2
2-147334-3
2-147434-3
2-147334-4
2-147434-4
2-147334-5
2-147434-5
2-147334-6
2-147434-6
2-147334-7
2-147434-7
2-147334-8
2-147434-8
2-147334-9
2-147434-9
3-147334-0
3-147434-0
3-147334-1
3-147434-1
3-147334-2
3-147434-2
3-147334-3
3-147434-3
3-147334-4
3-147434-4
3-147334-5
3-147434-5
3-147334-6
3-147434-6
3-147334-7
3-147434-7
3-147334-8
3-147434-8
3-147334-9
3-147434-9
4-147334-0
4-147434-0
4-147334-1
4-147434-1
4-147334-2
4-147434-2
Description
Post Length
0.400 [10.16]
0.410 [10.41]
0.420 [10.67]
0.430 [10.92]
0.440 [11.18]
0.450 [11.43]
0.460 [11.68]
0.470 [11.94]
0.480 [12.19]
0.490 [12.45]
0.500 [12.70]
0.510 [12.95]
0.520 [13.21]
0.530 [13.46]
0.540 [13.72]
0.550 [13.97]
0.560 [14.22]
0.570 [14.48]
0.580 [14.73]
0.590 [14.99]
0.600 [15.24]
Description
Post Length
0.610 [15.49]
0.620 [15.75]
0.630 [16.00]
0.640 [16.26]
0.650 [16.51]
0.660 [16.76]
0.670 [17.02]
0.680 [17.27]
0.690 [17.53]
0.700 [17.78]
0.710 [18.03]
0.720 [18.29]
0.730 [18.54]
0.740 [18.80]
0.750 [19.05]
0.760 [19.30]
0.770 [19.56]
0.780 [19.81]
0.790 [20.07]
0.800 [20.32]
0.810 [20.57]
Part Number
Square
Square with Star
4-147334-3
4-147434-3
4-147334-4
4-147434-4
4-147334-5
4-147434-5
4-147334-6
4-147434-6
4-147334-7
4-147434-7
4-147334-8
4-147434-8
4-147334-9
4-147434-9
5-147334-0
5-147434-0
5-147334-1
5-147434-1
5-147334-2
5-147434-2
5-147334-3
5-147434-3
5-147334-4
5-147434-4
5-147334-5
5-147434-5
5-147334-6
5-147434-6
5-147334-7
5-147434-7
5-147334-8
5-147434-8
5-147334-9
5-147434-9
6-147334-0
6-147434-0
6-147334-1
6-147434-1
Description
Post Length
0.820 [20.83]
0.830 [21.08]
0.840 [21.34]
0.850 [21.59]
0.860 [21.84]
0.870 [22.10]
0.880 [22.35]
0.890 [22.61]
0.900 [22.86]
0.910 [23.11]
0.920 [23.37]
0.930 [23.62]
0.940 [23.88]
0.950 [24.13]
0.960 [24.38]
0.970 [24.64]
0.980 [24.89]
0.990 [25.15]
1.000 [25.40]
Pre-Plated 30µ in. Gold
Part Number
Square
Square with Star
147335-1
147435-1
147335-2
147435-2
147335-3
147435-3
147335-4
147435-4
147335-5
147435-5
147335-6
147435-6
147335-7
147435-7
147335-8
147435-8
147335-9
147435-9
1-147335-0
1-147435-0
1-147335-1
1-147435-1
1-147335-2
1-147435-2
1-147335-3
1-147435-3
1-147335-4
1-147435-4
1-147335-5
1-147435-5
1-147335-6
1-147435-6
1-147335-7
1-147435-7
1-147335-8
1-147435-8
1-147335-9
1-147435-9
2-147335-0
2-147435-0
2-147335-1
2-147435-1
5
Description
Post Length
0.400 [10.16]
0.410 [10.41]
0.420 [10.67]
0.430 [10.92]
0.440 [11.18]
0.450 [11.43]
0.460 [11.68]
0.470 [11.94]
0.480 [12.19]
0.490 [12.45]
0.500 [12.70]
0.510 [12.95]
0.520 [13.21]
0.530 [13.46]
0.540 [13.72]
0.550 [13.97]
0.560 [14.22]
0.570 [14.48]
0.580 [14.73]
0.590 [14.99]
0.600 [15.24]
Part Number
Square
Square with Star
2-147335-2
2-147435-2
2-147335-3
2-147435-3
2-147335-4
2-147435-4
2-147335-5
2-147435-5
2-147335-6
2-147435-6
2-147335-7
2-147435-7
2-147335-8
2-147435-8
2-147335-9
2-147435-9
3-147335-0
3-147435-0
3-147335-1
3-147435-1
3-147335-2
3-147435-2
3-147335-3
3-147435-3
3-147335-4
3-147435-4
3-147335-5
3-147435-5
3-147335-6
3-147435-6
3-147335-7
3-147435-7
3-147335-8
3-147435-8
3-147335-9
3-147435-9
4-147335-0
4-147435-0
4-147335-1
4-147435-1
4-147335-2
4-147435-2
Description
Post Length
0.610 [15.49]
0.620 [15.75]
0.630 [16.00]
0.640 [16.26]
0.650 [16.51]
0.660 [16.76]
0.670 [17.02]
0.680 [17.27]
0.690 [17.53]
0.700 [17.78]
0.710 [18.03]
0.720 [18.29]
0.730 [18.54]
0.740 [18.80]
0.750 [19.05]
0.760 [19.30]
0.770 [19.56]
0.780 [19.81]
0.790 [20.07]
0.800 [20.32]
0.810 [20.57]
Part Number
Square
Square with Star
4-147335-3
4-147435-3
4-147335-4
4-147435-4
4-147335-5
4-147435-5
4-147335-6
4-147435-6
4-147335-7
4-147435-7
4-147335-8
4-147435-8
4-147335-9
4-147435-9
5-147335-0
5-147435-0
5-147335-1
5-147435-1
5-147335-2
5-147435-2
5-147335-3
5-147435-3
5-147335-4
5-147435-4
5-147335-5
5-147435-5
5-147335-6
5-147435-6
5-147335-7
5-147435-7
5-147335-8
5-147435-8
5-147335-9
5-147435-9
6-147335-0
6-147435-0
6-147335-1
6-147435-1
Description
Post Length
0.820 [20.83]
0.830 [21.08]
0.840 [21.34]
0.850 [21.59]
0.860 [21.84]
0.870 [22.10]
0.880 [22.35]
0.890 [22.61]
0.900 [22.86]
0.910 [23.11]
0.920 [23.37]
0.930 [23.62]
0.940 [23.88]
0.950 [24.13]
0.960 [24.38]
0.970 [24.64]
0.980 [24.89]
0.990 [25.15]
1.000 [25.40]
182
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
AMPMODU .045 [1.14] Square Continuous Posts
Features of .045 [1.14]
Square Continuous Posts
Brass drawn wire for posts
■ .400 to 1.000 [10.16 to
25.40] overall pin length
(.010 [0.25] increments)
■ Plating Options:
Tin-Lead
15µ in. gold
30µ in. gold
■ Star feature also available
■
Benefits
Less expensive than
bandolier style posts
■ Can be placed on printed
circuit boards at any desired
centerline
■ Less scrap material (no
carrier strip)
■
Technical Documents (page 294):
Photo 108642
Application Specification
114-13011
Photo 109148-1
Tyco Electronics now offers
AMPMODU .045 [1.14]
Square Continuous Posts.
These posts can be used
instead of the original posts
that come on a bandolier
style carrier strip. These
posts are on a reel, but the
posts are ‘notched’ at the
desired length (no carrier
strip is needed). This
feature allows more
versatility by providing
posts lengths from .400 to
1.000 [10.16 to 25.40],
available in increments of
.010 [0.25].
The posts are brass drawn
wire and are inserted into a
printed circuit board via
application tooling at any
centerline configuration.
They can be used for wire
wrap applications or mated
to a receptacle.
Potential industries include:
building systems,
commercial/home
equipment, household
appliances, home power
tools and equipment.
The current rating is 7
amps. The posts are
available plated with tin
lead, 15µ in. gold, or 30µ in.
gold. Other platings are
available upon request.
The application tooling
needed is a modular head
(Part Number 904640-1)
which is placed on the AMP
Comp-U-Sertor machine
(Part Number 122300-1.)
5
183
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
AMPMODU .045" [1.14] Square Continuous Posts (Continued)
Pre-Plated Tin
Part Number
Square
Square with Star
147070-1
147436-1
147070-2
147436-2
147070-3
147436-3
147070-4
147436-4
147070-5
147436-5
147070-6
147436-6
147070-7
147436-7
147070-8
147436-8
147070-9
147436-9
1-147070-0
1-147436-0
1-147070-1
1-147436-1
1-147070-2
1-147436-2
1-147070-3
1-147436-3
1-147070-4
1-147436-4
1-147070-5
1-147436-5
1-147070-6
1-147436-6
1-147070-7
1-147436-7
1-147070-8
1-147436-8
1-147070-9
1-147436-9
2-147070-0
2-147436-0
2-147070-1
2-147436-1
Description
Post Length
0.400 [10.16]
0.410 [10.41]
0.420 [10.67]
0.430 [10.92]
0.440 [11.18]
0.450 [11.43]
0.460 [11.68]
0.470 [11.94]
0.480 [12.19]
0.490 [12.45]
0.500 [12.70]
0.510 [12.95]
0.520 [13.21]
0.530 [13.46]
0.540 [13.72]
0.550 [13.97]
0.560 [14.22]
0.570 [14.48]
0.580 [14.73]
0.590 [14.99]
0.600 [15.24]
Part Number
Square
Square with Star
2-147070-2
2-147436-2
2-147070-3
2-147436-3
2-147070-4
2-147436-4
2-147070-5
2-147436-5
2-147070-6
2-147436-6
2-147070-7
2-147436-7
2-147070-8
2-147436-8
2-147070-9
2-147436-9
3-147070-0
3-147436-0
3-147070-1
3-147436-1
3-147070-2
3-147436-2
3-147070-3
3-147436-3
3-147070-4
3-147436-4
3-147070-5
3-147436-5
3-147070-6
3-147436-6
3-147070-7
3-147436-7
3-147070-8
3-147436-8
3-147070-9
3-147436-9
4-147070-0
4-147436-0
4-147070-1
4-147436-1
4-147070-2
4-147436-2
Description
Post Length
0.610 [15.49]
0.620 [15.75]
0.630 [16.00]
0.640 [16.26]
0.650 [16.51]
0.660 [16.76]
0.670 [17.02]
0.680 [17.27]
0.690 [17.53]
0.700 [17.78]
0.710 [18.03]
0.720 [18.29]
0.730 [18.54]
0.740 [18.80]
0.750 [19.05]
0.760 [19.30]
0.770 [19.56]
0.780 [19.81]
0.790 [20.07]
0.800 [20.32]
0.810 [20.57]
Part Number
Square
Square with Star
4-147070-3
4-147436-3
4-147070-4
4-147436-4
4-147070-5
4-147436-5
4-147070-6
4-147436-6
4-147070-7
4-147436-7
4-147070-8
4-147436-8
4-147070-9
4-147436-9
5-147070-0
5-147436-0
5-147070-1
5-147436-1
5-147070-2
5-147436-2
5-147070-3
5-147436-3
5-147070-4
5-147436-4
5-147070-5
5-147436-5
5-147070-6
5-147436-6
5-147070-7
5-147436-7
5-147070-8
5-147436-8
5-147070-9
5-147436-9
6-147070-0
6-147436-0
6-147070-1
6-147436-1
Description
Post Length
0.820 [20.83]
0.830 [21.08]
0.840 [21.34]
0.850 [21.59]
0.860 [21.84]
0.870 [22.10]
0.880 [22.35]
0.890 [22.61]
0.900 [22.86]
0.910 [23.11]
0.920 [23.37]
0.930 [23.62]
0.940 [23.88]
0.950 [24.13]
0.960 [24.38]
0.970 [24.64]
0.980 [24.89]
0.990 [25.15]
1.000 [25.40]
Pre-Plated 15µ in. Gold
Part Number
Square
Square with Star
147071-1
147437-1
147071-2
147437-2
147071-3
147437-3
147071-4
147437-4
147071-5
147437-5
147071-6
147437-6
147071-7
147437-7
147071-8
147437-8
147071-9
147437-9
1-147071-0
1-147437-0
1-147071-1
1-147437-1
1-147071-2
1-147437-2
1-147071-3
1-147437-3
1-147071-4
1-147437-4
1-147071-5
1-147437-5
1-147071-6
1-147437-6
1-147071-7
1-147437-7
1-147071-8
1-147437-8
1-147071-9
1-147437-9
2-147071-0
2-147437-0
2-147071-1
2-147437-1
0.400 [10.16]
0.410 [10.41]
0.420 [10.67]
0.430 [10.92]
0.440 [11.18]
0.450 [11.43]
0.460 [11.68]
0.470 [11.94]
0.480 [12.19]
0.490 [12.45]
0.500 [12.70]
0.510 [12.95]
0.520 [13.21]
0.530 [13.46]
0.540 [13.72]
0.550 [13.97]
0.560 [14.22]
0.570 [14.48]
0.580 [14.73]
0.590 [14.99]
0.600 [15.24]
Part Number
Square
Square with Star
2-147071-2
2-147437-2
2-147071-3
2-147437-3
2-147071-4
2-147437-4
2-147071-5
2-147437-5
2-147071-6
2-147437-6
2-147071-7
2-147437-7
2-147071-8
2-147437-8
2-147071-9
2-147437-9
3-147071-0
3-147437-0
3-147071-1
3-147437-1
3-147071-2
3-147437-2
3-147071-3
3-147437-3
3-147071-4
3-147437-4
3-147071-5
3-147437-5
3-147071-6
3-147437-6
3-147071-7
3-147437-7
3-147071-8
3-147437-8
3-147071-9
3-147437-9
4-147071-0
4-147437-0
4-147071-1
4-147437-1
4-147071-2
4-147437-2
0.610 [15.49]
0.620 [15.75]
0.630 [16.00]
0.640 [16.26]
0.650 [16.51]
0.660 [16.76]
0.670 [17.02]
0.680 [17.27]
0.690 [17.53]
0.700 [17.78]
0.710 [18.03]
0.720 [18.29]
0.730 [18.54]
0.740 [18.80]
0.750 [19.05]
0.760 [19.30]
0.770 [19.56]
0.780 [19.81]
0.790 [20.07]
0.800 [20.32]
0.810 [20.57]
Description
Post Length
0.400 [10.16]
0.410 [10.41]
0.420 [10.67]
0.430 [10.92]
0.440 [11.18]
0.450 [11.43]
0.460 [11.68]
0.470 [11.94]
0.480 [12.19]
0.490 [12.45]
0.500 [12.70]
0.510 [12.95]
0.520 [13.21]
0.530 [13.46]
0.540 [13.72]
0.550 [13.97]
0.560 [14.22]
0.570 [14.48]
0.580 [14.73]
0.590 [14.99]
0.600 [15.24]
Part Number
Square
Square with Star
2-147072-2
2-147438-2
2-147072-3
2-147438-3
2-147072-4
2-147438-4
2-147072-5
2-147438-5
2-147072-6
2-147438-6
2-147072-7
2-147438-7
2-147072-8
2-147438-8
2-147072-9
2-147438-9
3-147072-0
3-147438-0
3-147072-1
3-147438-1
3-147072-2
3-147438-2
3-147072-3
3-147438-3
3-147072-4
3-147438-4
3-147072-5
3-147438-5
3-147072-6
3-147438-6
3-147072-7
3-147438-7
3-147072-8
3-147438-8
3-147072-9
3-147438-9
4-147072-0
4-147438-0
4-147072-1
4-147438-1
4-147072-2
4-147438-2
Description
Post Length
0.610 [15.49]
0.620 [15.75]
0.630 [16.00]
0.640 [16.26]
0.650 [16.51]
0.660 [16.76]
0.670 [17.02]
0.680 [17.27]
0.690 [17.53]
0.700 [17.78]
0.710 [18.03]
0.720 [18.29]
0.730 [18.54]
0.740 [18.80]
0.750 [19.05]
0.760 [19.30]
0.770 [19.56]
0.780 [19.81]
0.790 [20.07]
0.800 [20.32]
0.810 [20.57]
Description
Post Length
Description
Post Length
Part Number
Square
Square with Star
4-147071-3
4-147437-3
4-147071-4
4-147437-4
4-147071-5
4-147437-5
4-147071-6
4-147437-6
4-147071-7
4-147437-7
4-147071-8
4-147437-8
4-147071-9
4-147437-9
5-147071-0
5-147437-0
5-147071-1
5-147437-1
5-147071-2
5-147437-2
5-147071-3
5-147437-3
5-147071-4
5-147437-4
5-147071-5
5-147437-5
5-147071-6
5-147437-6
5-147071-7
5-147437-7
5-147071-8
5-147437-8
5-147071-9
5-147437-9
6-147071-0
6-147437-0
6-147071-1
6-147437-1
0.820 [20.83]
0.830 [21.08]
0.840 [21.34]
0.850 [21.59]
0.860 [21.84]
0.870 [22.10]
0.880 [22.35]
0.890 [22.61]
0.900 [22.86]
0.910 [23.11]
0.920 [23.37]
0.930 [23.62]
0.940 [23.88]
0.950 [24.13]
0.960 [24.38]
0.970 [24.64]
0.980 [24.89]
0.990 [25.15]
1.000 [25.40]
Part Number
Square
Square with Star
4-147072-3
4-147438-3
4-147072-4
4-147438-4
4-147072-5
4-147438-5
4-147072-6
4-147438-6
4-147072-7
4-147438-7
4-147072-8
4-147438-8
4-147072-9
4-147438-9
5-147072-0
5-147438-0
5-147072-1
5-147438-1
5-147072-2
5-147438-2
5-147072-3
5-147438-3
5-147072-4
5-147438-4
5-147072-5
5-147438-5
5-147072-6
5-147438-6
5-147072-7
5-147438-7
5-147072-8
5-147438-8
5-147072-9
5-147438-9
6-147072-0
6-147438-0
6-147072-1
6-147438-1
Description
Post Length
0.820 [20.83]
0.830 [21.08]
0.840 [21.34]
0.850 [21.59]
0.860 [21.84]
0.870 [22.10]
0.880 [22.35]
0.890 [22.61]
0.900 [22.86]
0.910 [23.11]
0.920 [23.37]
0.930 [23.62]
0.940 [23.88]
0.950 [24.13]
0.960 [24.38]
0.970 [24.64]
0.980 [24.89]
0.990 [25.15]
1.000 [25.40]
Description
Post Length
Pre-Plated 30µ in. Gold
Part Number
Square
Square with Star
147072-1
147438-1
147072-2
147438-2
147072-3
147438-3
147072-4
147438-4
147072-5
147438-5
147072-6
147438-6
147072-7
147438-7
147072-8
147438-8
147072-9
147438-9
1-147072-0
1-147438-0
1-147072-1
1-147438-1
1-147072-2
1-147438-2
1-147072-3
1-147438-3
1-147072-4
1-147438-4
1-147072-5
1-147438-5
1-147072-6
1-147438-6
1-147072-7
1-147438-7
1-147072-8
1-147438-8
1-147072-9
1-147438-9
2-147072-0
2-147438-0
2-147072-1
2-147438-1
5
184
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Receptacle Assemblies, Horizontal Mount
Product Facts
■
All receptacle assemblies
are end stackable
■
Contact design employs
dual cantilever beams with
built-in anti-overstress
feature
■
Closed entry housings help
prevent post stubbing
■
Wide range of sizes
available
■
Other versions available
upon request
■
Housings made of high
temperature, surface mount
compatible thermoplastic
material, 94V-O rated
■
Duplex gold and bright tinlead plated contacts have
full nickel underplate
■
Housings feature PC board
standoffs
■
Solder tails accommodate
a PC board thickness of
.062 [1.57]
■
Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
■
Certified by Canadian
Standards
Association,
File No. LR 7189
Photo 98188
Horizontal Mount
receptacle assemblies are
designed to reliably and
economically meet the
packaging and
interconnection
requirements of today’s
electronics industry,
generally for applications
using the mother/daughter
board arrangement.
This product line is offered
in both single and double
row configurations. The
.100 [2.54] centerline
assemblies are available in
a wide range of position
sizes. They have end
stacking capability which
give the added advantage
of flexibility.
The housings are made of
high temperature, surface
mount compatible
thermoplastic material that
is 94V-O rated. Contacts
are phosphor bronze, fully
underplated with nickel to
help prevent corrosion and
are available in three
plating options.
The receptacle contact is
an established proven
design with a fully
enclosed, one-piece “box”
to protect the contact area.
In addition, the receptacle
contact has dual cantilever
beams with a built-in antioverstress feature.
Standard solder tails
accommodate a board
thickness of .062 [1.57].
Performance
Characteristics
Mechanical Characteristics:
Electrical Characteristics:
Mating Force—6.0 oz. [1.67N] per
contact (max.)
Unmating Force—.75 oz. [0.21N] per
contact (min.) during third mating cycle
Durability—200 cycles
Current Rating—3.0 amperes (max.)
for single contact; 2.0 amperes (max.)
per contact when connector is fully
energized
Contact Resistance—12 milliohms
(max.)
Insulation Resistance—5000
megohms (min.) between adjacent
contacts
Dielectric Withstanding Voltage
(at sea level)—750 V rms
Environmental Characteristics:
Operating Temperature—
-55°C to +125°C
5
185
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Mod II Receptacle Assemblies, Single-Row,
.100 [2.54] Centerline
Closed Entry, End Stackable,
Short Point-of-Contact,
with Standoffs
.320
[8.13]
A
.050
[1.27]
(2 Plc.)
.100
[2.54]
Typ.
Photo 98185-5
.174
[4.42] Max.
(Point-of-Contact)
B
Material and Finish:
Housing—Black thermoplastic, 94V-0
rated, high temperature, surface mount
compatible
Contacts—Phosphor bronze,
plated as follows:
Plating A—Duplex .000030 [0.00076]
gold on contact area, .000150-.000300
[0.00381-0.00762] tin-lead on solder
area all over .000050 [0.00127] nickel
Plating B—Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
tin-lead on solder area all over .000050
[0.00127] nickel
Plating C—.000100-.000200
[0.00254-0.00508] tin-lead over
.000050 [0.00127]
1
B
PC Board
(Ref.)
Additional receptacle assembly
sizes are available; minimum
order quantities may apply.
Consult Tyco Electronics.
Keying Plug
5
Part No. 86286-1
(Plugs into receptacle contact)
Material—Natural color nylon
.125
[3.18]
(Localized Gold
Plate Area)
CL
.310
[7.87]
CL
+.005
.060 -.000
.100*
[2.54] Typ.
.060
[ 1.52
]
+.0.13
-.000
.310
[7.87]
.035±.003 Dia.
[0.89±0.08] Typ.
Mateable Headers—Refer
to the Mating Post Selection Guide
(page 89)
Performance Characteristics—
page 185
Product Specification 108-25026
Application Specification
114-25018
2
Pos. Ref.
Related Product Data:
Technical Documents (page 294):
.069
[1.75]
.137
[3.48]
Post
Entry
.115
[2.92]
Recommended PC Board Hole Layout
(for .062 [1.57] thick PC board)
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
Dimensions
Contact Plating/Part Nos.
A
B
Plating A
Plating B
Plating C
2
.200 [5.08]
.100 [2.54]
535676-1
146139-1
535677-5
3
.300 [7.62]
.200 [5.08]
535676-2
146139-2
535677-6
4
.400 [10.16]
.300 [7.62]
535676-3
146139-3
535677-7
5
.500 [12.70]
.400 [10.16]
535676-4
146139-4
535677-8
6
.600 [15.24]
.500 [12.70]
535676-5
146139-5
535677-1
7
.700 [17.78]
.600 [15.24]
535676-6
146139-6
535677-2
8
.800 [20.32]
.700 [17.78]
535676-7
146139-7
535677-9
9
.900 [22.86]
.800 [20.32]
535676-8
146139-8
1-535677-0
10
1.000 [25.40]
.900 [22.86]
535676-9
146139-9
1-535677-1
11
1.100 [27.94]
1.000 [25.40]
1-535676-0
1-146139-0
1-535677-2
12
1.200 [30.48]
1.100 [27.94]
1-535676-1
1-146139-1
1-535677-3
13
1.300 [33.02]
1.200 [30.48]
1-535676-2
1-146139-2
1-535677-3
14
1.400 [35.56]
1.300 [33.02]
1-535676-3
1-146139-3
1-535677-4
15
1.500 [38.10]
1.400 [35.56]
1-535676-4
1-146139-4
1-535677-5
16
1.600 [40.64]
1.500 [38.10]
1-535676-5
1-146139-5
1-535677-6
17
1.700 [43.18]
1.600 [40.64]
1-535676-6
1-146139-6
1-535677-7
18
1.800 [45.72]
1.700 [43.18]
1-535676-7
1-146139-7
1-535677-8
19
1.900 [48.26]
1.800 [45.72]
1-535676-8
1-146139-8
1-535677-9
20
2.000 [50.80]
1.900 [48.26]
1-535676-9
1-146139-9
2-535677-0
30
3.000 [76.20]
2.900 [73.66]
2-535676-9
2-146139-9
2-535677-1
40
4.000 [101.60]
3.900 [99.06]
3-535676-9
3-146139-9
2-535677-2
Note: 1. Tyco Electronics recommends mating gold or duplex plated headers with duplex plated receptacle assemblies.
No.of
Pos.
186
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Mod II Receptacle Assemblies, Double-Row,
.100 x .100 [2.54 x 2.54] Centerlines
Closed Entry, End Stackable,
Short Point-of-Contact,
with Standoffs
.320
[8.13]
A
.174
[4.42] Max.
(Point-of-Contact)
.050
[1.27]
(2 Plc.)
B
.100
[2.54]
Typ.
.100
[2.54]
Material and Finish:
Housing—Black thermoplastic, 94V-0
rated, high temperature, surface mount
compatible
Contacts—Phosphor bronze,
plated as follows:
Plating A—Duplex .000030 [0.00076]
gold on contact area, .000150-.000300
[0.00381-0.00762] tin-lead on solder
area all over .000050 [0.00127] nickel
Plating B—Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
tin-lead on solder area all over .000050
[0.00127] nickel
Plating C—.000100-.000200
[0.00254-0.00508] tin-lead over
.000050 [0.00127]
.069
[1.75]
1
Technical Documents (page 294):
Product Specification 108-25026
Application Specification
114-25018
Additional receptacle assembly
sizes are available; minimum
order quantities may apply.
Consult Tyco Electronics.
.310
.125
[3.18]
CL [7.87]
(Localized Gold
Plate Area)
B
.100*
Typ.
[2.54]
PC Board
(Ref.)
.238
[6.05]
.115
[2.92]
2
Pos. Ref.
CL
+.005
.060 -.000
1.52
[ .060
]
+0.13
-.000
.310
[7.87]
.035±.003 Dia.
[0.89±0.08] Typ.
Recommended PC Board Hole Layout
(for .062 [1.57] thick PC board)
Related Product Data:
Mateable Headers—Refer
to the Mating Post Selection Guide
(page 89)
Performance Characteristics—
page 185
Post
Entry
.118
[3.00]
(Localized Gold
Plate Area)
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
Dimensions
Contact Plating/Part Nos.
A
B
Plating A
Plating B
Plating C
4
.200 [5.08]
.100 [2.54]
6-535512-1
146140-1
6-102084-4
6
.300 [7.62]
.200 [5.08]
6-535512-2
146140-2
6-102084-3
8
.400 [10.16]
.300 [7.62]
6-535512-3
146140-3
6-102084-2
10
.500 [12.70]
.400 [10.16]
6-535512-4
146140-4
6-102084-1
12
.600 [15.24]
.500 [12.70]
1-535512-1
146140-5
6-102084-0
14
.700 [17.78]
.600 [15.24]
1-535512-7
146140-6
5-102084-9
16
.800 [20.32]
.700 [17.78]
1-535512-8
146140-7
5-102084-8
18
.900 [22.86]
.800 [20.32]
1-535512-6
146140-8
5-102084-7
20
1.000 [25.40]
.900 [22.86]
1-535512-2
146140-9
5-102084-6
22
1.100 [27.94]
1.000 [25.40]
1-535512-9
1-146140-0
5-102084-5
24
1.200 [30.48]
1.100 [27.94]
1-535512-3
1-146140-1
5-102084-4
26
1.300 [33.02]
1.200 [30.48]
2-535512-0
1-146140-2
5-102084-3
28
1.400 [35.56]
1.300 [33.02]
2-535512-1
1-146140-3
5-102084-2
30
1.500 [38.10]
1.400 [35.56]
2-535512-2
1-146140-4
5-102084-1
32
1.600 [40.64]
1.500 [38.10]
2-535512-3
1-146140-5
5-102084-0
34
1.700 [43.18]
1.600 [40.64]
1-535512-4
1-146140-6
4-102084-9
36
1.800 [45.72]
1.700 [43.18]
1-535512-5
1-146140-7
4-102084-8
38
1.900 [48.26]
1.800 [45.72]
2-535512-4
1-146140-8
4-102084-7
40
2.000 [50.80]
1.900 [48.26]
2-535512-5
1-146140-9
4-102084-6
50
2.500 [63.50]
2.400 [60.96]
1-535512-7
2-146140-0
4-102084-1
60
3.000 [76.20]
2.900 [73.66]
3-535512-0
2-146140-1
3-102084-6
Notes: 1. Tyco Electronics recommends mating gold or duplex plated headers with duplex plated receptacle assemblies.
2. .256 [6.50] minimum positive pin stop to prevent shorting between row.
No. of
Pos.
5
187
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Mod II Surface Mount Horizontal Receptacle Assemblies, .100 x .100
[2.54 x 2.54] Centerline
Product Facts
■
Surface mount leads
■
All receptacle assemblies
are end stackable
■
Contact design employs
dual cantilever beams with
built-in anti-overstress
feature
■
Closed entry housings help
prevent post stubbing
■
Housings made of high
temperature, surface mount
compatible thermoplastic
material, 94 V-0 rated
■
Duplex gold and bright tinlead plated contacts have
full nickel underplate
■
Housings feature PC board
standoffs
■
Recognized under the
Component Program of
Underwriters Laboratories
Inc., File No. E28476
■
Certified by Canadian
Standards Association, File
No. LR 7189
Horizontal surface mount
receptacle assemblies are
designed to reliably and
economically meet the
packaging and
interconnection
requirements of today’s
electronic industry as
process technologies
evolve from wave soldering
to surface mount
processing.
This broad product line is
offered in both single and
double row configurations.
The .100 [2.54] centerline
assemblies are available in
2-40 (single row) positions
and 4-80 (double row)
positions. Housings are end
stackable, which gives the
advantage of added
flexibility.
The housings are made of
high temperature material
that is 94 V-0 rated.
Contacts are phosphor
bronze, fully underplated
with nickel to help prevent
corrosion and are available
in three plating options.
The receptacle contact is
an established proven
design, with a fully
enclosed one-piece "box" to
protect the contact beams
with built-in anti-overstress
feature.
Performance
Characteristics
5
Mechanical Characteristics:
Electrical Characteristics:
Mating Force—6.0 oz. [1.67N] per
contact (max.)
Unmating Force—.75 oz. [0.21N] per
contact (min.) during third mating cycle
Durability—200 cycles
Current Rating—3.0 amperes (max.)
for single contact; 2.0 amperes (max.)
per contact when connector is fully
energized
Contact Resistance—12 milliohms
(max.)
Insulation Resistance—5000
megohms (min.) between adjacent
contacts
Dielectric Withstanding Voltage
(at sea level)—750 V rms
Environmental Characteristics:
Operating Temperature—
-55°C to +125°C
188
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Mod II Receptacle Assemblies, Single-Row, Surface Mount.100 [2.54]
Centerline
Closed Entry, End Stackable,
Short Point-of-Contact,
with Standoffs
.320
[8.13]
A
.100
[2.54]
Typ.
.050
[1.27]
.174
[4.42] Max.
(Point-of-Contact)
X
Material and Finish:
Housing—Black thermoplastic, 94V-0
rated, high temperature, surface mount
compatible
Contacts—Phosphor bronze,
plated as follows:
Plating A—Duplex .000030
[0.00076] gold on contact area,
.000150-.000300 [0.00381-0.00762]
tin-lead on solder area all over .000050
[0.00127] nickel
Plating B—Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
tin-lead on solder area all over .000050
[0.00127] nickel
Plating C—.000100-.000200
[0.00254-0.00508] tin-lead over
.000050 [0.00127] nickel
.137
[3.48]
.069
[1.75]
X
.008
.005
[0.20]
[0.13]
Typ.
.388±.010
[9.85±0.25]
Pos. No.
Ref. Typ.
.125
[3.18]
(Localized Gold
Plate Area)
Section X–X
.100
[2.54]
Typ.
.060
[1.52] Typ.
.356
[9.04]
.090
[2.29] Typ.
Related Product Data:
Recommended Etched Circuit Layout
(for .040 [1.02] min. thick PC Board;
.008 [0.20] thick stencil)
Mateable Headers—Refer
to the Mating Post Selection Guide
(page 89)
Performance Characteristics—
page 188
Technical Documents (page 294):
Product Specification 108-25026
Application Specification
114-25018
Additional receptacle assembly
sizes are available; minimum
order quantities may apply.
Consult Tyco Electronics.
Keying Plug
Part No. 86286-1
(Plugs into receptacle contact)
Material—Natural color nylon
No. of
Pos.
Dimensions
A
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
30
40
.200 [5.08]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
3.000 [76.20]
4.000[101.60]
Plating A
147721-1
147721-2
147721-3
147721-4
147721-5
147721-6
147721-7
147721-8
147721-9
1-147721-0
1-147721-1
1-147721-2
1-147721-3
1-147721-4
1-147721-5
1-147721-6
1-147721-7
1-147721-8
1-147721-9
2-147721-9
3-147721-9
Contact Plating/Part Nos.
Plating B
147732-1
147732-2
147732-3
147732-4
147732-5
147732-6
147732-7
147732-8
147732-9
1-147732-0
1-147732-1
1-147732-2
1-147732-3
1-147732-4
1-147732-5
1-147732-6
1-147732-7
1-147732-8
1-147732-9
2-147732-9
3-147732-9
Plating C
147733-1
147733-2
147733-3
147733-4
147733-5
147733-6
147733-7
147733-8
147733-9
1-147733-0
1-147733-1
1-147733-2
1-147733-3
1-147733-4
1-147733-5
1-147733-6
1-147733-7
1-147733-8
1-147733-9
2-147733-9
3-147733-9
5
189
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Mod II Receptacle Assemblies, Double-Row, Surface Mount.100 [2.54]
Centerline
Closed Entry, End Stackable,
Short Point-of-Contact,
with Standoffs
.320
[8.13]
A
.100
[2.54]
.050
[1.27]
Ref.
.100
[2.54]
Typ.
.174
[4.42] Max.
(Point-of-Contact)
.118
[3.00]
(Localized Gold
Plate Area)
.256
[6.51]
Post
Stop
.238
[6.05]
Material and Finish:
Housing—Black thermoplastic, 94V-0
rated, high temperature, surface mount
compatible
Contacts—Phosphor bronze,
plated as follows:
Plating A—Duplex .000030
[0.00076] gold on contact area,
.000150-.000300 [0.00381-0.00762]
tin-lead on solder area all over .000050
[0.00127] nickel
Plating B—Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
tin-lead on solder area all over .000050
[0.00127] nickel
Plating C—.000100-.000200
[0.00254-0.00508] tin-lead over
.000050 [0.00127]
.008
.005
[0.20]
[0.13]
Typ.
.069
[1.75]
.100
[2.54]
Typ.
.125
[3.18]
(Localized Gold
Plate Area)
.060
[1.52] Typ.
.356
[9.04]
.090
[2.29] Typ.
Recommended Etched Circuit Layout
(for .040 [1.02] min thick PC Board;
.008 [0.20] thick stencil)
Related Product Data:
Mateable Headers—Refer
to the Mating Post Selection Guide
(page 89)
Performance Characteristics—
page 188
Technical Documents (page 294):
Product Specification 108-25026
Application Specification
114-25018
Additional receptacle assembly
sizes are available; minimum
order quantities may apply.
Consult Tyco Electronics.
5
.388±.010
[9.85±0.25]
No. of
Pos.
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
50
60
Dimensions
A
.200
.300
.400
.500
.600
.700
.800
.900
1.000
1.100
1.200
1.300
1.400
1.500
1.600
1.700
1.800
1.900
2.000
2.500
3.000
[5.08]
[7.62]
[10.16]
[12.70]
[15.24]
[17.78]
[20.32]
[22.86]
[25.40]
[27.94]
[30.48]
[33.02]
[35.56]
[38.10]
[40.64]
[43.18]
[45.72]
[48.26]
[50.80]
[63.50]
[76.20]
Plating A
147722-1
147722-2
147722-3
147722-4
147722-5
147722-6
147722-7
147722-8
147722-9
1-147722-0
1-147722-1
1-147722-2
1-147722-3
1-147722-4
1-147722-5
1-147722-6
1-147722-7
1-147722-8
1-147722-9
2-147722-4
2-147722-9
Contact Plating/Part Nos.
Plating B
147734-1
147734-2
147734-3
147734-4
147734-5
147734-6
147734-7
147734-8
147734-9
1-147734-0
1-147734-1
1-147734-2
1-147734-3
1-147734-4
1-147734-5
1-147734-6
1-147734-7
1-147734-8
1-147734-9
2-147734-4
2-147734-9
Plating C
147735-1
147735-2
147735-3
147735-4
147735-5
147735-6
147735-7
147735-8
147735-9
1-147735-0
1-147735-1
1-147735-2
1-147735-3
1-147735-4
1-147735-5
1-147735-6
1-147735-7
1-147735-8
1-147735-9
2-147735-4
2-147735-9
190
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Receptacle Assemblies, Vertical Mount
Product Facts
■
Dual-cantilever beam
contact with box design
■
Single-row assemblies
have .100 [2.54] centerline
contact spacing; double-row
assemblies have .100 x .100
[2.54 x 2.54] centerline
contact spacing
■
3 through 40 positions in
single-row assemblies;
2 through 80 positions in
double-row assemblies
■
Mod II Standard .340 [8.64]
and Mod IV low
.265 [6.73] profiles
■
Mod II and Mod IV profiles
available in dual entry
■
Duplex gold and bright tinlead plated contacts have
full nickel underplate
■
Thermoplastic housings,
94V-0 rated
■
Standoffs for easy flux
cleaning
■
All throughhole assemblies
are end stackable
■
Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
■
Certified by Canadian
Standards
Association,
File No. LR 7189
Vertical receptacle
assemblies are designed to
reliably and economically
meet the packaging and
interconnection
requirements of today’s
electronic industry.
This broad product line
offers a wide variety of
assembly styles and
features. They are
available in dual entry style,
in both single and double
row configurations. The
.100 [2.54] centerline
assemblies are available in
Performance
Characteristics
Mechanical Characteristics:
Electrical Characteristics:
Mating Force—8.0 oz. [2.22N] per
contact (max.)
Unmating Force—.75 oz. [0.28N] per
contact (min.)
Durability (Tested to)—200 cycles
Current Rating—3.0 amperes (max.)
for single contact; 2.0 amperes (max.)
per contact when connector is fully
energized
Contact Resistance—12 milliohms
(max.)
Insulation Resistance—5000
megohms (min.) between adjacent
contacts
Dielectric Withstanding Voltage
(at sea level)—750 V rms
Environmental Characteristics:
Operating Temperature—
-65°C to +105°C
3-40 (single row) positions
and 2-80 (double row)
positions. Standard and
low profile housings which
are end stackable also
enhance the product line
giving the advantage of
added flexibility.
The housings are made of
flame retardant material
that is 94 V-0 rated.
Contacts are phosphor
bronze, fully underplated
with nickel to help prevent
corrosion and are available
in three plating options.
The receptacle contact is
an established proven
design, with a fully
enclosed one-piece “box”
to protect the contact
beams.
These assemblies are
offered in .265 [6.73]
(Mod IV) and .340[8.64]
(Mod II) high profiles.
Standard solder tails
accommodate board
thickness of .062 [1.57].
Product styles include
single and dual tine
variations. Outrigger tine
styles are also available
for bottom entry parallel
board stacking
applications.
5
191
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Mod II Receptacle Assemblies, Single-Row,
.100 [2.54] Centerline
Closed Top Entry,
End Stackable, with
Single Tine Contacts
.020
[0.51]
(Standoffs)
X
.340
[8.64]
X
.148
[3.76]
A
Material and Finish:
Housing—Black thermoplastic,
94V-0 rated
Contacts—Phosphor bronze,
plated as follows:
Plating A—Duplex .000030
[0.00076] gold on contact area,
.000150-.000300 [0.00381-0.00762]
tin-lead on solder area all over .000050
[0.00127] nickel
Plating B—Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
tin-lead on solder area all over .000050
[0.00127] nickel
Plating C—.000100-.000200
[0.00254-0.00508] tin-lead over
.000050 [0.00127] nickel
.107
[2.72]
(Localized Gold
Plate Area)
.140
[3.56]
.100±.003
[2.54±0.08]
.050
[1.27]
Max.
Typ.
.035±.003 Dia.
[0.89±0.08] Typ.
.100
[2.54]
Recommended PC Board Hole Layout
Mateable Headers—Refer
to the Mating Post Selection Guide
(page 89)
Performance Characteristics—
page 191
Technical Documents (page 294):
Product Specification 108-25022
Application Specification
114-25018
Additional receptacle assembly
sizes are available; minimum
order quantities may apply.
Consult Tyco Electronics.
Keying Plug
Part No. 86286-1
(Plugs into receptacle contact)
Material—Natural color nylon
.115
[2.92]
Ref.
B
Related Product Data:
5
Point of
Contact
Contact Plating/Part Nos.
No. of
Dimensions
Pos.
A
B
Plating A
Plating B
Plating C
3
.300 [7.62]
.200 [5.08]
534237-1
146386-1
146763-5
4
.400 [10.16]
.300 [7.62]
534237-2
1-146386-9
146763-6
5
.500 [12.70]
.400 [10.16]
534237-3
146386-2
146763-7
6
.600 [15.24]
.500 [12.70]
534237-4
146386-3
146763-8
7
.700 [17.78]
.600 [15.24]
534237-5
146386-4
146763-1
8
.800 [20.32]
.700 [17.78]
534237-6
146386-5
146763-2
9
.900 [22.86]
.800 [20.32]
534237-7
146386-6
146763-9
10
1.000 [25.40]
.900 [22.86]
534237-8
146386-7
146763-3
11
1.100 [27.94]
1.000 [25.40]
534237-9
146386-8
1-146763-0
12
1.200 [30.48]
1.100 [27.94]
1-534237-0
146386-9
1-146763-1
13
1.300 [33.02]
1.200 [30.48]
1-534237-1
1-146386-0
1-146763-2
14
1.400 [35.56]
1.300 [33.02]
1-534237-2
1-146386-1
1-146763-3
15
1.500 [38.10]
1.400 [35.56]
1-534237-3
2-146386-0
1-146763-4
16
1.600 [40.64]
1.500 [38.10]
1-534237-4
2-146386-1
1-146763-5
17
1.700 [43.18]
1.600 [40.64]
1-534237-5
2-146386-2
1-146763-6
18
1.800 [45.72]
1.700 [43.18]
1-534237-6
2-146386-3
1-146763-7
19
1.900 [48.26]
1.800 [45.72]
1-534237-7
2-146386-4
1-146763-8
20
2.000 [50.80]
1.900 [48.26]
1-534237-8
1-146386-2
1-146763-9
30
3.000 [76.20]
2.900 [73.66]
2-534237-8
1-146386-8
2-146763-8
40
4.000 [101.60]
3.900 [99.06]
3-534237-8
3-146386-8
3-146763-8
Notes: 1. Tyco Electronics recommends mating gold or duplex plated headers with duplex plated receptacle
assemblies.
2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to
the maximum point-of-contact dimension.
192
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Mod II Receptacle Assemblies, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline
Closed Top Entry,
Side and End Stackable
.100 x .100 [2.54 x 2.54]
Centerline, .100 [2.54]
Tine Spacing
.020
[0.51]
(Standoffs)
.320
[8.13]
A
.148
[3.77]
Typ.
.050
[1.27]
Max.
Typ.
Material and Finish:
Housing—Black thermoplastic,
94V-0 rated
Contacts—Phosphor bronze,
plated as follows:
Plating A—Duplex .000030
[0.00076] gold on contact area,
.000150-.000300 [0.00381-0.00762]
tin-lead on solder area all over .000050
[0.00127] nickel
Plating B—Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
tin-lead on solder area all over .000050
[0.00127] nickel
Plating C—.000100-.000200
[0.00254-0.00508] tin-lead over
.000050 [0.00127] nickel
.100±.003
[2.54±0.08]
.198
[5.03]
.100
[2.54]
Typ.
.107
[2.72]
Typ.
(Localized
Gold Plate
Area)
.100
[2.54]
Typ.
B
.100
[2.54]
Typ.
Point of
Contact
.100
[2.54]
Typ.
.115±0.10
[2.92±0.25]
Ref.
.035±.003 Dia.
[0.89±0.08]
Recommended PC Board Hole Layout
(for .062 [1.57] thick PC board)
Related Product Data:
Mateable Headers—Refer
to the Mating Post Selection Guide
(page 89)
Performance Characteristics—
page 191
Technical Documents (page 294):
Product Specification 108-25022
Application Specification
114-25018
Additional receptacle assembly
sizes are available; minimum
order quantities may apply.
Consult Tyco Electronics.
Keying Plug
Part No. 86286-1
(Plugs into receptacle contact)
Material—Natural color nylon
No. of
Positions
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
Dimensions
A
B
.100 [2.54]
—
.200 [5.08]
.100 [2.54]
.300 [7.62]
.200 [5.08]
.400 [10.16]
.300 [7.62]
.500 [12.70]
.400 [10.16]
.600 [15.24]
.500 [12.70]
.700 [17.78]
.600 [15.24]
.800 [20.32]
.700 [17.78]
.900 [22.86]
.800 [20.32]
1.000 [25.40]
.900 [22.86]
1.100 [27.94]
1.000 [25.40]
1.200 [30.48]
1.100 [27.94]
1.300 [33.02]
1.200 [30.48]
1.400 [35.56]
1.300 [33.02]
1.500 [38.10]
1.400 [35.56]
1.600 [40.64]
1.500 [38.10]
1.700 [43.18]
1.600 [40.64]
1.800 [45.72]
1.700 [43.18]
1.900 [48.26]
1.800 [45.72]
2.000 [50.80]
1.900 [48.26]
Plating A
534206-1
534206-2
534206-3
534206-4
534206-5
534206-6
534206-7
534206-8
534206-9
1-534206-0
1-534206-1
1-534206-2
1-534206-3
1-534206-4
1-534206-5
1-534206-6
1-534206-7
1-534206-8
1-534206-9
2-534206-0
Contact Plating/Part Nos.
Plating B
Plating C
147424-1
146762-8
147424-2
146762-9
147424-3
1-146762-0
147424-4
146762-1
147424-5
146762-2
147424-6
1-146762-1
147424-7
1-146762-2
147424-8
1-146762-3
147424-9
146762-3
1-147424-0
146762-7
1-147424-1
1-146762-4
1-147424-2
1-146762-5
1-147424-3
1-146762-6
1-147424-4
1-146762-7
1-147424-5
146762-4
1-147424-6
1-146762-8
1-147424-7
1-146762-9
1-147424-8
2-146762-0
1-147424-9
2-146762-1
2-147424-0
146762-5
5
Notes: 1. Tyco Electronics recommends mating gold or duplex plated headers with duplex plated receptacle
assemblies.
2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to
the maximum point-of-contact dimension.
193
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Mod IV Receptacle Assemblies, Single-Row,
.100 [2.54] Centerline
Bottom Entry, End Stackable,
Low Profile with Dual Tine
Contacts
.020
[.51]
Typ.
.265
[6.73]
.100
[2.54±.08]
Typ.
Material and Finish:
Housing—Black thermoplastic,
94V-0 rated
Contacts—Phosphor bronze,
plated as follows:
Plating A—Duplex .000030
[0.00076] gold on contact area,
.000050-.000100 [0.00127-0.00254]
tin-lead on solder area all over .000050
[0.00127] nickel
Plating B—Duplex .000015
[0.000381] gold on contact area,
.000050-.000100 [0.00127-0.00254]
tin-lead on solder area all over .000050
[0.00127] nickel
Plating C—.000100-.000200
[0.00254-0.00508] tin-lead over
.000050 [0.00127] nickel
.175
[4.44]
Max.
.062
[1.57]
PC Board
A
.140
[3.56]
A
.050
[1.27]
Ref.
Point of
Contact
.245
[6.22]
Ref.
B
.115
[2.92]
A
Section AA
.064-.067
[1.52-1.70]
.100
[2.54]
Related Product Data:
Recommended PC Board Hole Layout
Mateable Headers—Refer
to the Mating Post Selection Guide
(page 89)
Performance Characteristics—
page 191
Technical Documents (page 294):
Product Specification 108-25022
Application Specification
114-25018
Additional receptacle assembly
sizes are available; minimum
order quantitiesmay apply.
Consult Tyco Electronics.
5
Keying Plug
Part No. 86286-1
(Plugs into receptacle contact)
Material—Natural color nylon
No. of
Positions
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
30
40
Dimensions
A
B
.300 [7.62]
.200 [5.08]
.400 [10.16]
.300 [7.62]
.500 [12.70]
.400 [10.16]
.600 [15.24]
.500 [12.70]
.700 [17.78]
.600 [15.24]
.800 [20.32]
.700 [17.78]
.900 [22.86]
.800 [20.32]
1.000 [25.40]
.900 [22.86]
1.100 [27.94]
1.000 [25.40]
1.200 [30.48]
1.100 [27.94]
1.300 [33.02]
1.200 [30.48]
1.400 [35.56]
1.300 [33.02]
1.500 [38.10]
1.400 [35.56]
1.600 [40.64]
1.500 [38.10]
1.700 [43.18]
1.600 [40.64]
1.800 [45.72]
1.700 [43.18]
1.900 [48.26]
1.800 [45.72]
2.000 [50.80]
1.900 [48.26]
3.000 [76.20]
2.900 [73.66]
4.000 [101.60]
3.900 [99.06]
Plating A
3-87879-7
3-87879-6
3-87879-8
87879-3
87879-4
87879-1
87879-5
87879-2
87879-6
87879-7
87879-8
87879-9
1-87879-0
1-87879-1
1-87879-2
1-87879-3
1-87879-4
1-87879-5
2-87879-5
3-87879-5
Contact Plating/Part Nos.
Plating B
Plating C
147326-1
102742-4
147326-2
102742-8
147326-3
102742-9
147326-4
1-102742-0
147326-5
102742-7
147326-6
102742-3
147326-7
102742-6
147326-8
1-102742-1
147326-9
102742-1
1-147326-0
102742-2
1-147326-1
1-102742-2
1-147326-2
1-102742-3
1-147326-3
1-102742-4
1-147326-4
102742-5
1-147326-5
1-102742-5
1-147326-6
1-102742-6
1-147326-7
1-102742-7
1-147326-8
1-102742-8
2-147326-8
2-102742-8
3-147326-8
3-102742-8
Notes: 1. Tyco Electronics recommends mating gold or duplex plated headers with duplex plated receptacle
assemblies.
2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to
the maximum point-of-contact dimension and .062 for recommended board thickness.
194
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Mod IV Receptacle Assemblies, Single-Row,
.100 [2.54] Centerline
Closed Top Entry,
End Stackable, Low Profile
with Single Tine Contacts
.020
[0.51]
(Standoffs)
X
.245
[6.22]
X
.148
[3.76]
A
Material and Finish:
Housing—Black thermoplastic,
94V-0 rated
Contacts—Phosphor bronze,
plated as follows:
Plating A—Duplex .000030 [0.00076]
gold on contact area, .000150-.000300
[0.00381-0.00762] tin-lead on solder
area all over .000050 [0.00127] nickel
Plating B—Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
tin-lead on solder area all over .000050
[0.00127] nickel
Plating C—.000100-.000200
[0.00254-0.00508] tin-lead over
.000050 [0.00127] nickel
.140
[3.56]
Point of
Contact
.107
[2.72]
(Localized
Gold Plate
Area)
.050
[1.27]
Max.
Typ.
.100±.003
[2.54±0.08]
.125
[3.18]
Ref.
Section XX
B
.035±.003 Dia.
[0.88±0.08] Typ.
.100
[2.54]
Recommended PC Board Hole Layout
(for .062 [1.57] thick PCboard)
Related Product Data:
Mateable Headers—Refer
to the Mating Post Selection Guide
(page 89)
Performance Characteristics—
page 191
Technical Documents (page 294):
Product Specification 108-25022
Application Specification
114-25018
Additional receptacle assembly
sizes are available; minimum
order quantities may apply.
Consult Tyco Electronics.
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions
Contact Plating/Part Nos.
A
B
Plating A
Plating B
Plating C
3
.300 [7.62]
.200 [5.08]
535541-1
146138-1
1-535584-3
4
.400 [10.16]
.300 [7.62]
535541-2
146138-2
1-535584-4
5
.500 [12.70]
.400 [10.16]
535541-3
146138-3
1-535584-5
6
.600 [15.24]
.500 [12.70]
535541-4
146138-4
1-535584-1
7
.700 [17.78]
.600 [15.24]
535541-5
146138-5
1-535584-6
8
.800 [20.32]
.700 [17.78]
535541-6
146138-6
1-535584-7
9
.900 [22.86]
.800 [20.32]
535541-7
146138-7
1-535584-8
10
1.000 [25.40]
.900 [22.86]
535541-8
146138-8
1-535584-9
11
1.100 [27.94]
1.000 [25.40]
535541-9
146138-9
1-535584-0
12
1.200 [30.48]
1.100 [27.94]
1-535541-0
1-146138-0
1-535584-1
13
1.300 [33.02]
1.200 [30.48]
1-535541-1
1-146138-1
1-535584-2
14
1.400 [35.56]
1.300 [33.02]
1-535541-2
1-146138-2
1-535584-3
15
1.500 [38.10]
1.400 [35.56]
1-535541-3
1-146138-3
1-535584-4
16
1.600 [40.64]
1.500 [38.10]
1-535541-4
1-146138-4
1-535584-5
17
1.700 [43.18]
1.600 [40.64]
1-535541-5
1-146138-5
1-535584-6
18
1.800 [45.72]
1.700 [43.18]
1-535541-6
1-146138-6
1-535584-2
19
1.900 [48.26]
1.800 [45.72]
1-535541-7
1-146138-7
1-535584-7
20
2.000 [50.80]
1.900 [48.26]
1-535541-8
1-146138-8
1-535584-8
30
3.000 [76.20]
2.900 [73.66]
2-535541-8
1-146138-9
1-535584-9
40
4.000 [101.60]
3.900 [99.06]
3-535541-8
2-146138-0
2-535584-0
Notes: 1. Tyco Electronics recommends mating gold or duplex plated headers with select gold plated receptacle
assemblies.
2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to
the maximum point-of-contact dimension.
No. of
Pos.
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
5
195
AMPMODU Interconnection System
Mod IV Receptacle Assemblies, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline
Closed Top Entry,
End and Side Stackable,
Low Profile, .100 x .100
[2.54 x 2.54] Centerline,
.100 [2.54] Tine Spacing
.020
[0.51]
(Standoffs)
.245
[6.22]
A
.148
[3.77]
Typ.
.050
[1.27]
Max.
Typ.
Material and Finish:
Housing—Black thermoplastic,
94V-0 rated
Contacts—Phosphor bronze,
plated as follows:
Plating A—Duplex .000030 [0.00076]
gold on contact area, .000150-.000300
[0.00381-0.00762] tin-lead on solder
area all over .000050 [0.00127] nickel
Plating B—Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
tin-lead on solder area all over .000050
[0.00127] nickel
Plating C—.000100-.000200
[0.00254-0.00508] tin-lead over
.000050 [0.00127] nickel
.100±.003
[2.540.08]
.198
[5.03]
Point of
Contact
.107
[2.72]
Typ.
(Localized
Gold Plate
Area)
.100
[2.54]
Typ.
.125±.010
[3.18±0.25]
Typ.
.100
[2.54]
Typ.
.100
[2.54]
Typ.
B
.100
[2.54]
Typ.
.035±.003
Dia.
[0.89±0.08]
Recommended PC Board Hole Layout
Related Product Data:
Mateable Headers—Refer
to the Mating Post Selection Guide
(page 89)
Performance Characteristics—
page 191
Technical Documents (page 294):
Product Specification 108-25022
Application Specification
114-25018
5
No.of
Pos.
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
Dimensions
A
.100 [2.54]
.200 [5.08]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
B
—
.100 [2.54]
.200 [5.08]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
Plating A
534998-1
534998-2
534998-3
534998-4
534998-5
534998-6
534998-7
534998-8
534998-9
1-534998-0
1-534998-1
1-534998-2
1-534998-3
1-534998-4
1-534998-5
1-534998-6
1-534998-7
1-534998-8
1-534998-9
2-534998-0
Contact Plating/Part Nos.
Plating B
Plating C
535598-2
535585-3
535598-3
535585-4
535598-4
535585-5
535598-5
535585-6
535598-6
535585-1
535598-7
535585-2
535598-1
535585-7
535598-8
535585-8
535598-9
535585-9
1-535598-0
1-535585-0
1-535598-1
1-535585-1
1-535598-2
1-535585-2
1-535598-3
1-535585-3
1-535598-4
1-535585-4
1-535598-5
1-535585-5
1-535598-6
1-535585-6
1-535598-7
1-535585-7
1-535598-8
1-535585-8
1-535598-9
1-535585-9
2-535598-0
2-535585-0
Notes: 1. Tyco Electronics recommends
part number and
mating
dategold
code
orstamped
duplex plated
on housing
headers
where
withsize
duplex
permits.
plated receptacle
Notes: 2. assemblies.
AMP recommends mating gold or duplex plated headers with duplex plated receptacle assemblies.
3. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to the
2.
maximum
the
maximum
point-of-contact
point-of-contact
dimension.
dimension.
196
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Mod IV Receptacle Assemblies, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline (Continued)
Keying Plug
No.of
Pos.
Part No. 86286-1
(Plugs into receptacle contact)
Material—Natural color nylon
42
44
46
48
50
52
54
56
58
60
62
64
66
68
70
72
74
76
78
80
Dimensions
A
B
2.100 [53.34]
2.000 [50.80]
2.200 [55.88]
2.100 [53.34]
2.300 [58.42]
2.200 [55.88]
2.400 [60.96]
2.300 [58.42]
2.500 [63.50]
2.400 [60.96]
2.600 [66.04]
2.500 [63.50]
2.700 [68.58]
2.600 [66.04]
2.800 [71.12]
2.700 [68.58]
2.900 [73.66]
2.800 [71.12]
3.000 [76.20]
2.900 [73.66]
3.100 [78.74]
3.000 [76.20]
3.200 [81.28]
3.100 [78.74]
3.300 [83.82]
3.200 [81.28]
3.400 [86.36]
3.300 [83.82]
3.500 [88.90]
3.400 [86.36]
3.600 [91.44]
3.500 [88.90]
3.700 [93.98]
3.600 [91.44]
3.800 [96.52]
3.700 [93.98]
3.900 [99.06]
3.800 [96.52]
4.000 [101.60]
3.900 [99.06]
Contact Plating/Part Nos.
Plating A
Plating B
Plating C
2-534998-1
2-535598-4
2-535585-4
2-534998-2
2-535598-5
2-535585-5
2-534998-3
2-535598-6
2-535585-6
2-534998-4
2-535598-7
2-535585-7
2-534998-5
2-535598-1
2-535585-1
2-534998-6
2-535598-8
2-535585-8
2-534998-7
2-535598-9
2-535585-9
2-534998-8
3-535598-0
3-535585-0
2-534998-9
3-535598-1
3-535585-1
3-534998-0
2-535598-2
2-535585-2
3-534998-1
3-535598-2
3-535585-2
3-534998-2
3-535598-3
3-535585-3
3-534998-3
3-535598-4
3-535585-4
3-534998-4
3-535598-5
3-535585-5
3-534998-5
3-535598-6
3-535585-6
3-534998-6
3-535598-7
3-535585-7
3-534998-7
3-535598-8
3-535585-8
3-534998-8
3-535598-9
3-535585-9
3-534998-9
4-535598-0
4-535585-0
4-534998-0
2-535598-3
2-535585-3
Notes: 1. Tyco Electronics recommends mating gold or duplex plated headers with duplex plated receptacle
assemblies.
2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to
the maximum point-of-contact dimension.
5
197
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Mod IV Receptacle Assemblies, Single-Row, Outrigger Design
.100 x .100 [2.54 x 2.54] Centerline, End To End Stackable
Dual Entry, End Stackable,
Low Profile, .100 x .100
[2.54 x 2.54] Centerline,
.200 [5.08] Tine Spacing
.125±.010
[3.17±0.25]
Typ.
.020
[0.51]
(Standoffs)
.245
[6.22]
.148
[3.77]
Typ.
A
Point of
Contact
.107
[2.72]
(Localized Gold
Plate Area)
Material and Finish:
Plating A—Duplex .000030 [0.00076]
gold on contact area, .000150-0.000300
[0.00381-0.00762] tin–lead on solder
area all over .000050 [0.00127] nickel
Plating B—Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
tin–lead on solder area all over .000050
[0.00127] nickel
Plating C—.000100-.000200
[0.00254-0.00508] tin-lead over
.000050 [0.00127] nickel
.140
[3.56]
.200±.003
[5.08±0.08]
Typ.
.053
[1.34]
Typ.
.100
[2.54]
Typ.
B
.075 +.005
-.000
1.90 +0.13
-.000
[
]
.200
[5.08]
.140
[3.56]
.035±.003
Dia.
[0.89±0.08]
.100
[2.54]
Typ.
Recommended PC Board Hole Layout
No. of
Pos.
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
30
40
5
Dimensions
A
B
.300 [7.62]
.200 [5.08]
.400 [10.16]
.300 [7.62]
.500 [12.70]
.400 [10.16]
.600 [15.24]
.500 [12.70]
.700 [17.78]
.600 [15.24]
.800 [20.32]
.700 [17.78]
.900 [22.86]
.800 [20.32]
1.000 [25.40]
.900 [22.86]
1.100 [27.94]
1.000 [25.40]
1.200 [30.48]
1.100 [27.94]
1.300 [33.02]
1.200 [30.48]
1.400 [35.56]
1.300 [33.02]
1.500 [38.10]
1.400 [35.56]
1.600 [40.64]
1.500 [38.10]
1.700 [43.18]
1.600 [40.64]
1.800 [45.72]
1.700 [43.18]
1.900 [48.26]
1.800 [45.72]
2.000 [50.80]
1.900 [48.26]
3.000 [76.20]
2.900 [73.66]
4.000 [101.60]
3.900 [99.06]
Plating A
147720-2
147720-3
147720-4
147720-5
147720-6
147720-7
147720-8
147720-9
1-147720-0
1-147720-1
1-147720-2
1-147720-3
1-147720-4
1-147720-5
1-147720-6
1-147720-7
1-147720-8
1-147720-9
2-147720-9
3-147720-9
Contact Plating/ Part Nos.
Plating B
147726-2
147726-3
147726-4
147726-5
147726-6
147726-7
147726-8
147726-9
1-147726-0
1-147726-1
1-147726-2
1-147726-3
1-147726-4
1-147726-5
1-147726-6
1-147726-7
1-147726-8
1-147726-9
2-147726-9
3-147726-9
Plating C
147727-2
147727-3
147727-4
147727-5
147727-6
147727-7
147727-8
147727-9
1-147727-0
1-147727-1
1-147727-2
1-147727-3
1-147727-4
1-147727-5
1-147727-6
1-147727-7
1-147727-8
1-147727-9
2-147727-9
3-147727-9
Notes: 1. Tyco Electronics recommends mating gold or duplex plated headers with duplex plated receptacle
assemblies.
2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to
the maximum point-of-contact dimension and add .062 [1.57] for recommended board thickness if used in
bottom entry application.
198
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Mod IV Receptacle Assemblies, Double-Row, Outrigger Design,
.100 x .100 [2.54 x 2.54] Centerline, End to End Stackable
Dual Entry, End Stackable,
Low Profile, .100 x .100
[2.54 x 2.54] Centerline,
.300 [7.62] Tine Spacing
.020
[0.51]
(Standoffs)
.245
[6.22]
Typ.
A
.148
[3.77]
Typ.
.050
[1.27]
Max.
Typ.
Material and Finish:
Housing—Black thermoplastic,
94V-0 rated
Contacts—Phosphor bronze,
plated as follows:
Plating A—Duplex .000030 [0.00076]
gold on contact area, .000150-.000300
[0.00381-0.00762] tin-lead on solder
area all over .000050 [0.00127] nickel
Plating B—Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
tin-lead on solder area all over .000050
[0.00127] nickel
Plating C—.000100-.000200
[0.00254-0.00508] tin-lead over
.000050 [0.00127] nickel
.100±.003
[2.54±0.08]
Point of
Contact
.107
[2.72]
Typ.
(Localized Gold
Plate Area)
.198
[5.03]
.125±.010
[3.17±0.25]
.100
[2.54]
Typ.
B
.300
[7.62]
Typ.
.100
[2.54]
Typ.
.100
[2.54]
Typ.
Related Product Data:
Mateable Headers—Refer
to the Mating Post Selection Guide
(page 89)
Performance Characteristics—
page 191
Technical Documents (page 294):
Product Specification 108-25022
Application Specification
114-25018
Additional receptacle assembly
sizes are available; minimum
order quantities may apply.
Consult Tyco Electronics.
Keying Plug
Part No. 86286-1
(Plugs into receptacle contact)
Material—Natural color nylon
.075
.035±.003 Dia.
[0.89±0.08] Typ.
No. of
Positions
2
4
6
8
14
18
20
24
30
36
40
48
50
60
76
80
+.005
-0.00 Dia.
.060+0.13 Typ.
1.90
-0.00 ]
Recommended PC Board Hole Layout
[
Dimensions
A
B
.100 [2.54]
–
.200 [5.08]
.100 [2.54]
.300 [7.62]
.200 [5.08]
.400 [10.16]
.300 [7.62]
.700 [17.78]
.600 [15.24]
.900 [22.86]
.800 [20.32]
1.000 [25.40]
.900 [22.86]
1.200 [30.48]
1.100 [27.94]
1.500 [38.10]
1.400 [35.56]
1.800 [45.72]
1.700 [43.18]
2.000 [50.80]
1.900 [48.26]
2.400 [60.96]
2.300 [58.42]
2.500 [63.50]
2.400 [60.96]
3.000 [76.20]
2.900 [73.66]
3.800 [96.52]
3.700 [93.98]
4.000 [101.60]
3.900 [99.06]
Plating A
1-534267-3
1-534267-7
1-534267-4
534267-5
534267-1
1-534267-0
534267-2
534267-9
1-534267-2
1-534267-5
534267-7
1-534267-1
1-534267-8
534267-8
1-534267-6
534267-4
.100
[2.54]
Typ.
Contact Plating/Part Nos.
Plating B
Plating C
147099-1
3-147100-9
147099-2
4-147100-0
147099-3
147100-1
147099-4
147100-2
147099-7
147100-5
147099-9
147100-7
1-147099-0
147100-8
1-147099-2
1-147100-0
1-147099-5
1-147100-3
1-147099-8
1-147100-6
2-147099-0
1-147100-8
2-147099-4
2-147100-2
2-147099-5
2-147100-3
3-147099-0
2-147100-8
3-147099-8
3-147100-6
4-147099-0
3-147100-8
5
Notes: 1. Tyco Electronics recommends mating gold or duplex plated headers with duplex plated receptacle
assemblies.
2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to
the maximum point-of-contact dimension and .062 for recommended board thickness if used in bottom entry
application.
199
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Mod. IV Receptacle Assemblies, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline
.020
[0.51]
Typ.
(Standoffs)
Closed Dual Entry, Side and
End Stackable Low Profile,
.100 x .100 [2.54 x 2.54]
Centerline, .150 [3.81] Tine
Spacing
.245
[6.22]
Typ.
A
.050
[1.27]
Max.
Typ.
Photo 110925
Material and Finish:
Housing—Black thermoplastic,
94V-0 rated
Contacts—Phosphor bronze,
plated as follows:
Plating A—Duplex .000030 [0.00076]
gold on contact area, .000150-.000300
[0.00381-0.00762] tin-lead on solder
area all over .000050 [0.00127] nickel
Plating B—Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
tin-lead on solder area all over .000050
[0.00127] nickel
Plating C—.000100-.000200
[0.00254-0.00508] tin-lead over
.000050 [0.00127] nickel
Related Product Data:
Mateable Headers—Refer
to the Mating Post Selection Guide
(page 89)
Performance Characteristics—page
191
Technical Documents (page 294):
Product Specification 108-25022
Application Specification
114-25018
5
.100±.003
[2.54±0.08]
.148
[3.77]
Typ.
Point of
Contact
.150
[3.81]
Typ.
.198
[5.03]
.107
[2.72]
Typ.
(Localized Gold
Plate Area)
.100
[2.54]
.130±.010
[3.30±0.25]
Typ.
B
.075+.005
-.000 Dia.
.060
1.90+0.13
-0.00 Typ.
[
]
B
.100
[2.54]
Typ.
.100
[2.54]
Typ.
.100
[2.54]
Typ.
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
Recommended PC Board Hole Layout
for Bottom Entry or Pass Through Applications
.035±.003
Dia. Typ.
[0.89±0.08]
.150
[3.81]
Typ.
Recommended PC Board Hole Layout
for Top Entry
Dimensions
Contact Plating/Part Nos.
A
B
Plating A
Plating B
Plating C
2
.100 [2.54]
—
535542-1
147095-1
147096-1
4
.200 [5.08]
.100 [2.54]
535542-2
147095-2
147096-2
6
.300 [7.62]
.200 [5.08]
535542-3
147095-3
147096-3
8
.400 [10.16]
.300 [7.62]
535542-4
147095-4
147096-4
10
.500 [12.70]
.400 [10.16]
535542-5
147095-5
147096-5
12
.600 [15.24]
.500 [12.70]
535542-6
147095-6
147096-6
14
.700 [17.78]
.600 [15.24]
535542-7
147095-7
147096-7
16
.800 [20.32]
.700 [17.78]
535542-8
147095-8
147096-8
18
.900 [22.86]
.800 [20.32]
535542-9
147095-9
147096-9
20
1.000 [25.40]
.900 [22.86]
1-535542-0
1-147095-0
1-147096-0
22
1.100 [27.94]
1.000 [25.40]
1-535542-1
1-147095-1
1-147096-1
24
1.200 [30.48]
1.100 [27.94]
1-535542-2
1-147095-2
1-147096-2
26
1.300 [33.02]
1.200 [30.48]
1-535542-3
1-147095-3
1-147096-3
28
1.400 [35.56]
1.300 [33.02]
1-535542-4
1-147095-4
1-147096-4
30
1.500 [38.10]
1.400 [35.56]
1-535542-5
1-147095-5
1-147096-5
32
1.600 [40.64]
1.500 [38.10]
1-535542-6
1-147095-6
1-147096-6
34
1.700 [43.18]
1.600 [40.64]
1-535542-7
1-147095-7
1-147096-7
36
1.800 [45.72]
1.700 [43.18]
1-535542-8
1-147095-8
1-147096-8
38
1.900 [48.26]
1.800 [45.72]
1-535542-9
1-147095-9
1-147096-9
40
2.000 [50.80]
1.900 [48.26]
2-535542-0
2-147095-0
2-147096-0
Notes: 1. Tyco Electronics recommends mating gold or duplex plated headers with duplex plated receptacle
assemblies.
2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to
the maximum point-of-contact dimension, and .062 [1.57] for recommended board thickness if used in
bottom entry application.
No. of
Pos.
200
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Mod. IV Receptacle Assemblies, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline (Continued)
No. of
Pos.
42
44
46
48
50
52
54
56
58
60
62
64
66
68
70
72
74
76
78
80
Dimensions
A
B
2.100 [53.34]
2.000 [50.80]
2.200 [55.88]
2.100 [53.34]
2.300 [58.42]
2.200 [55.88]
2.400 [60.96]
2.300 [58.42]
2.500 [63.50]
2.400 [60.96]
2.600 [66.04]
2.500 [63.50]
2.700 [68.58]
2.600 [66.04]
2.800 [71.12]
2.700 [68.58]
2.900 [73.66]
2.800 [71.12]
3.000 [76.20]
2.900 [73.66]
3.100 [78.74]
3.000 [76.20]
3.200 [81.28]
3.100 [78.74]
3.300 [83.82]
3.200 [81.28]
3.400 [86.36]
3.300 [83.82]
3.500 [88.90]
3.400 [86.36]
3.600 [91.44]
3.500 [88.90]
3.700 [93.98]
3.600 [91.44]
3.800 [96.52]
3.700 [93.98]
3.900 [99.06]
3.800 [96.52]
4.000 [101.60]
3.900 [99.06]
Plating A
2-535542-1
2-535542-2
2-535542-3
2-535542-4
2-535542-5
2-535542-6
2-535542-7
2-535542-8
2-535542-9
3-535542-0
3-535542-1
3-535542-2
3-535542-3
3-535542-4
3-535542-5
3-535542-6
3-535542-7
3-535542-8
3-535542-9
4-535542-0
Contact Plating/Part Nos.
Plating B
2-147095-1
2-147095-2
2-147095-3
2-147095-4
2-147095-5
2-147095-6
2-147095-7
2-147095-8
2-147095-9
3-147095-0
3-147095-1
3-147095-2
3-147095-3
3-147095-4
3-147095-5
3-147095-6
3-147095-7
3-147095-8
3-147095-9
4-147095-0
Plating C
2-147096-1
2-147096-2
2-147096-3
2-147096-4
2-147096-5
2-147096-6
2-147096-7
2-147096-8
2-147096-9
3-147096-0
3-147096-1
3-147096-2
3-147096-3
3-147096-4
3-147096-5
3-147096-6
3-147096-7
3-147096-8
3-147096-9
4-147096-0
5
201
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Mod IV Surface-Mount Vertical Receptacle Assemblies,
.100 x .100 [2.54 x 2.54] Centerline
Product Facts
■
Surface Mount Leads
■
Contact Material:
phosphor bronze
■
High temperature, black
thermoplastic housings,
94V-0 rated, capable of
withstanding IR or vaporphase reflow
■
Gold/tin-lead duplex plating
for reliable mating
interconnection and solder
interface
■
Metallic hold downs provide
retention in the PC board
prior to and during the
reflow process . . . and
strain relief after soldering
■
Hold downs provide for
proper lead-to-pad
registration
■
Closed-entry receptacle
housings provide lead-in
ramp for positive mating
■
Receptacle contacts employ
dual cantilever beams and
built-in anti-overstress for
reliable connections
■
Recognized under the
Component Program
of Underwriters
Laboratories Inc.
File No. E28476
■
Certified by
Canadian Standards
Association,
File No. LR 7189
5
The AMPMODU 0.025
[0.64] square
interconnection system is
an industry standard that
has provided level III and IV
through-hole
interconnections to almost
every industry and
marketplace for years. As
technology advances, so
has the AMPMODU product
line.
Surface mount vertical
receptacle assemblies are
available to meet your level II
packaging needs as process
technologies evolve from
wave soldering to surfacemount reflow (infrared and
vapor-phase) processes.
AMPMODU surface-mount
receptacle assemblies are
offered in vertical dual entry
configurations. These
receptacles are available in
single-row and double-row
configurations with a contact
centerline spacing of .100 x
.100 [2.54 x 2.54].
AMPMODU surface-mount
vertical receptacle
assemblies continue to
provide the proven features
and benefits of the throughhole counterparts in the
AMPMODU product family.
Closed-entry style housing
design provides a lead-in
ramp for positive mating of
contacts, virtually
eliminating the possibility of
stubbing. The dual-beam
receptacle contact design,
coupled with gold plating in
the contact area, provides a
reliable interface. The
contacts also provide builtin anti-overstress
protection. Tin-lead plating
on the solder tails also
enhances solderability.
board prior to and during
processing. Used with a
plated through-hole, the
hold downs are soldered
during the reflow process
and serve as a strain relief
for the solder joints during
mating/unmating.
The design of the hold
downs results in an
excellent ratio of
insertion/extraction forces
(into the PC board); 20 lb.
[89 N] maximum insertion
force per pair and 10 lb.
[44.5 N] minimum extraction
force per pair (unsoldered).
No tools are required for
insertion.
The incorporation of
compliant metallic hold
downs on receptacle
assemblies offers multiple
benefits. The hold downs
provide for proper lead-topad registration and
provide retention to the PC
202
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Mod IV Surface-Mount Vertical Receptacle Assemblies,
.100 x .100 [2.54 x 2.54] Centerline (Continued)
Performance
Specifications
Voltage Rating: 250 VAC
Current Rating: 3.0 amperes (max.) for single contact;
2.0 amperes (max.) per contact when connector is fully energized
Operating Temperature Range (Receptacle Assemblies): –65°C to +125°C
Operating Temperature Range (Headers): -65°C to +105°C
Dielectric Withstanding Voltage: 750 VAC
Termination Resistance: 12 milliohms (max.)
Insulation Resistance: 5000 megohms (min.)
Mating Force (Receptacle Assemblies): 8.0 oz. [2.22N] (max.) per contact
Unmating Force (Receptacle Assemblies): .75 oz. [0.21N] (min.) per contact
Durability: Tested to 200 cycles (min.) for .000030 [0.00076] gold plated contacts
5
203
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Mod IV Receptacle Assemblies, Single-Row, Surface Mount, .100 [2.54]
Centerline with Compliant Pin Hold Downs
Surface Mount, Dual
Entry with Compliant Pin
Holddowns
.020
[0.51]
Standoffs
Typ.
[ ]
.030 0.76
.025 0.64
Typ.
.038
[0.97]
.265
[6.73]
Typ.
D
.107
[2.72]
(Localized Gold
Plate Area)
C
Material and Finish:
Plating A—Duplex .000030 [0.00076]
gold on contact area, .000150-.000300
[0.00381-0.00762] tin–lead on solder
area all over .000050 [0.00127] nickel
Plating B—Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
tin–lead on solder area all over .000050
[0.00127] nickel
Plating C—.000100-.000200
[0.00254-0.00508] tin-lead over
.000050 [0.00127]
.208
[5.28] Max.
(Depressed)
.140
[3.56]
.100
[2.54] Typ.
.148
[3.77]
A
D
B
Mateable Headers—Refer to Mating
Post Selection Guide (page 89)
Performance Specifications—
page 203
.040±.003 Dia. Typ.
[1.02±0.08]
(For bottom entry or
pass thru applications)
.100
[2.54]
P.C. Board
Related Product Data:
.069
[1.75]
.228
[5.78]
.075
[1.91]
.090
[2.28] Typ.
.110
[2.79]
.042±.003 Dia.
[1.07±0.08]
204
C
.060
[1.52] Min.
Recommended PC Board Pad Pattern
(.008 [0.20] thick stencil)
.042±.003 Dia.
[1.07±0.08]
.042±.003 Dia.
[1.07±0.08]
Packaged in Tubes
Packaged in Tape & Reel
Contact Plating/ Part Nos.
Contact Plating/ Part Nos.
A
D
Plating A
Plating B
Plating C
Plating A
Plating B
Plating C
3
.500 [12.70]
.200 [5.08] See note 3
.400 [10.16]
147744-1
147743-1
147742-1
147724-1
147730-1
147731-1
4
.600 [15.24]
.300 [7.62] See note 3
.500 [12.70]
147744-2
147743-2
147742-2
147724-2
147730-2
147731-2
5
.700 [17.78]
.400 [10.16] See note 3
.600 [15.24]
147744-3
147743-3
147742-3
147724-3
147730-3
147731-3
6
.800 [20.32]
.500 [12.70] See note 3
.700 [17.78]
147744-4
147743-4
147742-4
147724-4
147730-4
147731-4
7
.900 [22.86]
.600 [15.24] See note 3
.800 [20.32]
147744-5
147743-5
147742-5
147724-5
147730-5
147731-5
8 1.000 [25.40]
.700 [17.78] See note 3
.900 [22.86]
147744-6
147743-6
147742-6
147724-6
147730-6
147731-6
9 1.100 [27.94]
.800 [20.32] See note 3 1.000 [25.40]
147744-7
147743-7
147742-7
147724-7
147730-7
147731-7
10 1.200 [30.48]
.900 [22.86] See note 3 1.100 [27.94]
147744-8
147743-8
147742-8
147724-8
147730-8
147731-8
11 1.300 [33.02] 1.000 [25.40]
See note 3 1.200 [30.48]
147744-9
147743-9
147742-9
147724-9
147730-9
147731-9
12 1.400 [35.56] 1.100 [27.94]
See note 3 1.300 [33.02]
1-147744-0 1-147743-0 1-147742-0
1-147724-0
1-147730-0 1-147731-0
13 1.500 [38.10] 1.200 [30.48]
See note 3 1.400 [35.56]
1-147744-1 1-147743-1 1-147742-1
1-147724-1
1-147730-1 1-147731-1
14 1.600 [40.64] 1.300 [33.02]
See note 3 1.500 [38.10]
1-147744-2 1-147743-2 1-147742-2
1-147724-2
1-147730-2 1-147731-2
15 1.700 [43.18] 1.400 [35.56]
See note 3 1.600 [40.64]
1-147744-3 1-147743-3 1-147742-3
1-147724-3
1-147730-3 1-147731-3
16 1.800 [45.72] 1.500 [38.10]
See note 3 1.700 [43.18]
1-147744-4 1-147743-4 1-147742-4
1-147724-4
1-147730-4 1-147731-4
17 1.900 [48.26] 1.600 [40.64]
See note 3 1.800 [45.72]
1-147744-5 1-147743-5 1-147742-5
1-147724-5
1-147730-5 1-147731-5
18 2.000 [50.80] 1.700 [43.18]
See note 3 1.900 [48.26]
1-147744-6 1-147743-6 1-147742-6
1-147724-6
1-147730-6 1-147731-6
19 2.100 [53.34] 1.800 [45.72]
See note 3 2.000 [50.80]
1-147744-7 1-147743-7 1-147742-7
1-147724-7
1-147730-7 1-147731-7
20 2.200 [55.88] 1.900 [48.26]
See note 3 2.100 [53.34]
1-147744-8 1-147743-8 1-147742-8
1-147724-8
1-147730-8 1-147731-8
30 3.200 [81.28] 2.900 [73.66]
See note 3 3.100 [78.74]
2-147744-8 2-147743-8 2-147742-8
2-147724-8
2-147730-8 2-147731-8
40 4.300 [109.22] 4.100 [104.14] 2.100 [53.34] 4.200 [106.68]
3-147744-8 3-147743-8 3-147742-8
3-147724-8
3-147730-8 3-147731-8
Notes: 1. Tyco Electronics recommends mating gold or duplex plated headers with duplex plated receptacle assemblies.
2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to the maximum point-of-contact dimension, and
.062 [1.57] for recommended board thickness if used in bottom entry application
3. No center hold down.
No. of
Pos.
5
Point of
Contact
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions
B
C
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Mod IV Receptacle Assemblies, Single-Row, Surface Mount, .100 [2.54] x .100
[2.54] Centerline End To End Stackable without Compliant Pin Holddowns
.020
[0.51] Standoff Typ.
Surface Mount,
Dual Entry, End to End
Stackable
.265
[6.73]
.107
[2.72]
Typ.
(Localized Gold
Plate Area)
A
.100
[2.54] Typ.
Material and Finish:
Plating A—Duplex .000030 [0.00076]
gold on contact area, .000150-.000300
[0.00381-0.00762] tin–lead on solder
area all over .000050 [0.00127] nickel
Plating B—Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
tin–lead on solder area all over .000050
[0.00127] nickel
Plating C—.000100-.000200
[0.00254-0.00508] tin-lead over
.000050 [0.00127]
.208
[5.28] Max.
.140
[3.56]
.148
[3.77]
Point of
Contact
.040±.003 Dia. Typ.
[1.02±0.08]
(For bottom entry or pass
through applications)
B
.100
[2.54]
Related Product Data:
Mateable Headers—Refer to Mating
Post Selection Guide (page 89)
Performance Specifications—
page 203
.228
[5.78]
.060
[1.52] Min.
.090
[2.28]
Recommended PC Board Pad Pattern
(.008 [0.20] thick stencil)
No. of
Pos.
Dimensions
A
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
30
40
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
3.000 [76.20]
4.000 [101.60]
B
.200 [5.08]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.900 [73.66]
3.900 [99.06]
Packaged in Tubes
Contact Plating/ Part Nos.
Plating A
Plating B
Plating C
147738-2
147737-2
147736-2
147738-3
147737-3
147736-3
147738-4
147737-4
147736-4
147738-5
147737-5
147736-5
147738-6
147737-6
147736-6
147738-7
147737-7
147736-7
147738-8
147737-8
147736-8
147738-9
147737-9
147736-9
1-147738-0
1-147737-0
1-147736-0
1-147738-1
1-147737-1
1-147736-1
1-147738-2
1-147737-2
1-147736-2
1-147738-3
1-147737-3
1-147736-3
1-147738-4
1-147737-4
1-147736-4
1-147738-5
1-147737-5
1-147736-5
1-147738-6
1-147737-6
1-147736-6
1-147738-7
1-147737-7
1-147736-7
1-147738-8
1-147737-8
1-147736-8
1-147738-9
1-147737-9
1-147736-9
2-147738-9
2-147737-9
2-147736-9
3-147738-9
3-147737-9
3-147736-9
Packaged in Tape & Reel
Contact Plating/ Part Nos.
Plating A
Plating B
Plating C
147723-2
147728-2
147729-2
147723-3
147728-3
147729-3
147723-4
147728-4
147729-4
147723-5
147728-5
147729-5
147723-6
147728-6
147729-6
147723-7
147728-7
147729-7
147723-8
147728-8
147729-8
147723-9
147728-9
147729-9
1-147723-0
1-147728-0
1-147729-0
1-147723-1
1-147728-1
1-147729-1
1-147723-2
1-147728-2
1-147729-2
1-147723-3
1-147728-3
1-147729-3
1-147723-4
1-147728-4
1-147729-4
1-147723-5
1-147728-5
1-147729-5
1-147723-6
1-147728-6
1-147729-6
1-147723-7
1-147728-7
1-147729-7
1-147723-8
1-147728-8
1-147729-8
1-147723-9
1-147728-9
1-147729-9
2-147723-9
2-147728-9
2-147729-9
3-147723-9
3-147728-9
3-147729-9
5
Notes: 1. Tyco Electronics recommends mating gold or duplex plated headers with duplex plated receptacle assemblies.
2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to
the maximum point-of-contact dimension, and .062 [1.57] for recommended board thickness if used in bottom entry application.
205
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Mod IV Surface-Mount Receptacle Assemblies, Double-Row,
.100 x .100 [2.54 x 2.54] Centers
Surface Mount,
Dual Entry
with Holddowns
A
.100
[2.54]
Typ.
.050
[1.27]
Typ.
.198
[5.03]
.265
[6.73]
Typ.
.148 Point of
[3.76] Contact
Typ.
.107
[2.72]
Typ.
(Localized Gold
Plate Area)
Material and Finish:
Housing—Black thermoplastic, 94V-0
rated, high temperature compatible
Contacts—Phosphor bronze, plated as
follows:
Plating A—Duplex .000030 [0.00076]
gold on contact area, .000150-.000300
[0.00381-0.00762] tin-lead on solder
area all over .000050 [0.00127] nickel
Plating B—Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
tin-lead on solder area all over .000050
[0.00127] nickel
Plating C—.000100-.000200
[0.00254-0.00508] tin-lead over
.000050 [0.00127] nickel
Related Product Data:
Mateable Headers—Refer to Mating
Post Selection Guide (page 89)
Performance Specifications—
page 203
.083
[2.12]
Typ.
.020
[0.51]
Typ.
.027±.002
[0.69±0.05] Typ.
.110
[2.79]
Typ.
.266
[6.75]
.238
[6.05]
Typ.
B
.040±.003
[1.02±0.08]
.100
[2.54] Typ.
.100
[2.54]
Typ.
.004
[0.10]
Typ.
.075
[1.91]
Typ.
.090
[2.29]
Typ.
.040±.003
[1.02±0.08]
Technical Documents (page 294):
D
.040
[1.02]
Typ.
(For bottom entry or
pass thru applications)
.060
[1.52]
Typ.
C
Recommended PC Board Layout
(.008 [0.20] thick stencil)
Product Specification 108-25022
Application Specification
114-25018
Additional receptacle assembly
sizes are available; minimum
order quantities may apply.
Consult Tyco Electronics.
Keying Plug
5
Part No. 86286-1
(Plugs into receptacle contact)
Material: Natural color nylon
206
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Mod IV Surface-Mount Receptacle Assemblies, Double-Row,
.100 x .100 [2.54 x 2.54] Centers (Continued)
No. of
A
Pos.
10
.700 [17.78]
14
.900 [22.86]
20 1.200 [30.48]
22 1.300 [33.02]
26 1.500 [38.10]
30 1.700 [43.18]
34 1.900 [48.26]
36 2.000 [50.08]
40 2.200 [55.88]
46 2.500 [63.50]
50 2.700 [68.58]
62 3.300 [83.82]
64 3.400 [86.36]
66 3.500 [88.90]
70 3.700 [95.98]
80 4.300 [109.22]
Dimensions
B
.400 [10.16]
.600 [15.24]
.900 [22.86]
1.000 [25.40]
1.200 [30.48]
1.400 [35.56]
1.600 [40.64]
1.700 [43.18]
1.900 [48.26]
2.200 [55.88]
2.400 [60.96]
3.000 [76.20]
3.100 [78.74]
3.200 [81.28]
3.400 [86.36]
3.900 [99.06]
C
D
.600 [15.24]
.800 [20.32]
1.100 [27.94]
1.200 [30.48]
1.400 [35.56]
1.600 [40.64]
1.800 [45.72]
1.900 [48.26]
2.100 [53.34]
2.400 [60.96]
2.600 [66.04]
3.200 [81.28]
3.300 [83.82]
3.400 [86.36]
3.600 [91.44]
4.200 [106.68]
See Note 1
See Note 1
See Note 1
See Note 1
See Note 1
See Note 1
See Note 1
See Note 1
See Note 1
See Note 1
See Note 1
See Note 1
See Note 1
See Note 1
See Note 1
2.100 [53.34]
Packaged in Tubes
Contact Plating/Part Nos.
Plating A
Plating B
Plating C
147102-5
147101-5
147103-5
147102-7
147101-7
147103-7
1-147102-0
1-147101-0 1-147103-0
1-147102-1
1-147101-1 1-147103-1
1-147102-3
1-147101-3 1-147103-3
1-147102-5
1-147101-5 1-147103-5
1-147102-7
1-147101-7 1-147103-7
1-147102-8
1-147101-8 1-147103-8
2-147102-0
2-147101-0 2-147103-0
2-147102-3
2-147101-3 2-147103-3
2-147102-5
2-147101-5 2-147103-5
3-147102-1
3-147101-1 3-147103-1
3-147102-2
3-147101-2 3-147103-2
3-147102-3
3-147101-3 3-147103-3
3-147102-5
3-147101-5 3-147103-5
4-147102-0
4-147101-0 4-147103-0
Packaged in Tape and Reel
Contact Plating/Part Nos.
Plating A
Plating B
Plating C
147747-5
147746-5
147745-5
147747-7
147746-7
147745-7
1-147747-0 1-147746-0 1-147745-0
1-147747-1 1-147746-1 1-147745-1
1-147747-3 1-147746-3 1-147745-3
1-147747-5 1-147746-5 1-147745-5
1-147747-7 1-147746-7 1-147745-7
1-147747-8 1-147746-8 1-147745-8
2-147747-0 2-147746-0 2-147745-0
2-147747-3 2-147746-4 2-147745-3
2-147747-5 2-147746-5 2-147745-5
3-147747-1 3-147746-1 3-147745-1
3-147747-2 3-147746-2 3-147745-2
3-147747-3 3-147746-3 3-147745-3
3-147747-5 3-147746-5 3-147745-5
4-147747-0 4-147746-0 4-147745-0
Notes: 1. No center holddown.
2. To obtain the minimum mating post length, add .020 [0.51] (not includingthe post lead in chamfer) to the maximum point-of-contact dimension and
.062 [1.57] for recommended board thickness in bottom entry applications.
5
207
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Mod IV Surface-Mount Receptacle Assemblies, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline
Surface Mount,
Dual Entry
End to End Stackable
A
.100
[2.54] Typ.
.100
[2.54] Typ.
D
.198±.002
[5.03±0.05]
.050
[1.27]
Max.
Photo 110962
.148 Point of
[3.76] Contact
.265
[6.73]
Typ.
Material and Finish:
Housing—Black thermoplastic, 94V-0
rated, high temperature compatible
Contacts—Phosphor bronze, plated as
follows:
Plating A—Duplex .000030 [0.00076]
gold on contact area, .000150-.000300
[0.00381-0.00762] tin-lead on solder
area all over .000050 [0.00127] nickel
Plating B—Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
tin-lead on solder area all over .000050
[0.00127] nickel
Plating C—.000100-.000200
[0.00254-0.00508] tin-lead over
.000050 [0.00127] nickel
.020
[0.51]
Typ.
.027±.002 Typ.
[0.69±0.05]
.266
[6.75]
.238
[6.05]
Typ.
B
.100
[2.54]
Typ.
.100
[2.54]
Typ.
.004
[0.10]
Typ.
.090
[2.29]
Related Product Data:
Mateable Headers—Refer to Mating
Post Selection Guide (page 89)
Performance Specifications—
page 203
.107
[2.72]
(Localized Gold
Plate Area)
.060
[1.52] Typ.
.040
[1.02] Typ.
Recommended PC Board Pad Layout
(.008 [0.20] thick stencil)
(for Bottom Entry and Pass Through applications)
Technical Documents (page 294):
Product Specification 108-25022
Application Specification
114-25018
Additional receptacle assembly
sizes are available; minimum
order quantities may apply.
Consult Tyco Electronics.
Keying Plug
5
Part No. 86286-1
(Plugs into receptacle contact)
Material: Natural color nylon
208
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Mod IV Surface-Mount Receptacle Assemblies, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline (Continued)
No. of
Pos.
Dimensions
A
10
14
20
22
26
30
34
36
40
46
50
62
64
66
70
80
.500 [12.70]
.700 [17.78]
1.000 [25.40]
1.100 [27.94]
1.300 [33.02]
1.500 [38.10]
1.700 [43.18]
1.800 [45.72]
2.000 [50.80]
2.300 [58.42]
2.500 [63.50]
3.100 [78.74]
3.200 [81.28]
3.300 [83.82]
3.500 [88.90]
4.000 [101.60]
B
.400 [10.16]
.600 [15.24]
.900 [22.86]
1.000 [25.40]
1.200 [30.48]
1.400 [35.56]
1.600 [40.64]
1.700 [43.18]
1.900 [48.26]
2.200 [55.88]
2.400 [60.96]
3.000 [76.20]
3.100 [78.74]
3.200 [81.28]
3.400 [86.36]
3.900 [99.06]
Packaged in Tubes
Contact Plating/ Part Nos.
Plating A
Plating B
Plating C
147741-5
147740-5
147739-5
147741-7
147740-7
147739-7
1-147741-0
1-147740-0
1-147739-0
1-147741-1
1-147740-1
1-147739-1
1-147741-3
1-147740-3
1-147739-3
1-147741-5
1-147740-5
1-147739-5
1-147741-7
1-147740-7
1-147739-7
1-147741-8
1-147740-8
1-147739-8
2-147741-0
2-147740-0
2-147739-0
2-147741-3
2-147740-3
2-147739-3
2-147741-5
2-147740-5
2-147739-5
3-147741-1
3-147740-1
3-147739-1
3-147741-2
3-147740-2
3-147739-2
3-147741-3
3-147740-3
3-147739-3
3-147741-5
3-147740-5
3-147739-5
4-147741-0
4-147740-0
4-147739-0
Packaged in Tape & Reel
Contact Plating/ Part Nos.
Plating A
Plating B
Plating C
147105-5
147104-5
147106-5
147105-7
147104-7
147106-7
1-147105-0
1-147104-0
1-147106-0
1-147105-1
1-147104-1
1-147106-1
1-147105-3
1-147104-3
1-147106-3
1-147105-5
1-147104-5
1-147106-5
1-147105-7
1-147104-7
1-147106-7
1-147105-8
1-147104-8
1-147106-8
2-147105-0
2-147104-0
2-147106-0
2-147105-3
2-147104-3
2-147106-3
2-147105-5
2-147104-5
2-147106-5
3-147105-1
3-147104-1
3-147106-1
3-147105-2
3-147104-2
3-147106-2
3-147105-3
3-147104-3
3-147106-3
3-147105-5
3-147104-5
3-147106-5
4-147105-0
4-147104-0
4-147106-0
Notes: 1. To obtain the minimum mating post length, add .020 [0.51] (not includingthe post lead in chamfer) to the maximum point-of-contact dimension and
.062 [1.57] for recommended board thickness in bottom entry applications.
5
209
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Two-Piece Printed Circuit Board Connectors
Product Facts
■
Two-Piece reliability
■
Two- and three-row systems
available
■
Short signal path for VLSI
applications
■
Receptacles employ dual
cantilever beams and builtin anti-overstress to provide
reliable connections
■
Built-in guides provide
alignment before contact
engagement
■
Closed entry receptacle
housings provide lead-in
ramp for positive mating of
contacts
■
Shrouded headers provide
full pin protection
■
Polarized headers
■
Vertical headers available
with ACTION PIN posts or
.025 [0.64] square solder
posts
■
Repairable ACTION PIN
posts
■
Simple seating tooling for
headers with ACTION PIN
posts
■
Recognized under the
Component Program
of Underwriters
Laboratories Inc.,
File No. E28476
■
Certified by Canadian
Standards
Association,
File No. LR 7189
Photo 94684
ACTION PIN Posts
Solder Posts
Receptacle Contact
(Double Beam with Anti-Overstress)
Board Retention Feature Available
3-Row Closed Entry
Receptacle 534974-8
3-Row Header
103264-3
532956-3 Horizontal
Receptacle
534972-2 Vertical
Receptacle
102690-3 Vertical
Header with
ACTION PIN
Posts
5
Double-Row
Make First/Break
Last Header
(Part Nos. available
upon request)
1-102589-2 3/4 Shroud,
Right Angle Header
532956-3 Horizontal
Receptacle
For drawings, technical data or samples,
contact your Tyco Electronics sales engineer
or call the Tyco Electronics Product
Information Center: 1-800-522-6752
210
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Two-Piece Printed Circuit Board Connectors
AMPMODU Two-Piece
Printed Circuit Board
connectors are designed to
reliably and economically
meet the packaging and
interconnection requirements
of today’s sophisticated
electronics.
The double row system is
produced in 10 thru 200
positions in the vertical
headers and horizontal
receptacles, and 10 thru
160 positions in the right
angle headers and vertical
receptacles.
Performance
Specifications
Current Rating: 3 amperes
max. for single contact;
2 amperes max. per
contact for fully energized
connector
Voltage Rating: 250 VAC
Dielectric Rating: 750 VAC
rms between contacts for
one minute
The AMPMODU three-row
connector system is
produced in 30 through 300
positions (straight post
headers and mating
horizontal receptacles).
Both two- and three-row
vertical headers are
available with press-fit
ACTION PIN posts or
standard .025 [0.64] square
solder posts. There is a
simple seating tool for
headers with ACTION PIN
posts.
Termination Resistance:
12 milliohms max. at 100
milliamperes test current,
and 50 millivolts open
circuit voltage
Insulation Resistance: 1000
megohms after
temperature/humidity
cycling
Temperature Rating:
Headers; –65°C to +105°C
(black thermoplastic
housings)
Receptacle Assemblies;
–65°C to +125°C (brown or
black thermoplastic
housings)
A board retention feature
is offered in the two-row
horizontal receptacles,
two-row right angle
headers and two- and
three-row vertical headers.
Built-in guides assure
accurate header and
receptacle alignment
before contact
engagement.
Closed entry receptacle
housings provide a lead-in
ramp for positive mating of
contacts.
Durability (Tested to): 200
cycles for .000030
[0.00076] gold plating;
75 cycles for .000015
[0.00038] gold plating
Mating Force: 8 oz. [2.22N]
maximum per contact
Unmating Force: .75 oz.
[0.2N] minimum per
contact during third mating
cycle
5
211
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Receptacle Assemblies, Board Mount, Double-Row,
Closed Entry, .100 x .100 [2.54 x 2.54] Centerline
Horizontal Mount
(with Guide Pin Slots
and Standoffs)
.320
[8.13]
.174
[4.42] Max.
(Point of Contact)
A
Material and Finish:
.179
[4.55]
Typ.
B
Housing—Thermoplastic, 94V-0 rated,
high temperature compatible
Contacts—Phosphor bronze, plated as
follows:
Plating A—Duplex plated .000030
[0.00076] gold on contact area,
.000050-.000100 [0.00127-0.00254]
bright tin-lead on solder area, with entire
contact underplated .000050 [0.00127]
nickel
Plating B—Duplex plated .000015
[0.00038] gold on contact area,
.000050-.000100 [0.00127-0.00254]
bright tin-lead on solder area, with entire
contact underplated .000050 [0.00127]
nickel
.100
[2.54]
.238
[6.05]
.144
Dia.
[3.66]
(2 Plc.)
.069
[1.75]
.115 or .145
[2.92 or 3.68]
(See Note 1)
Standard Solder Tails
Mateable Headers—pages 215-216
Performance Specifications—
page 211
.035±.003
[0.89±0.08] Typ. Dia.
(Finished Hole)
.065±.005
[1.65±0.13]
to
.100±.005
[2.54±0.13]
5
212
Tolerances not to accumulate within
one connector pattern.
Dimensions
A
12
14
16
20
24
30
36
40
50
60
70
72
80
86
90
96
100
110
120
130
200
.858 [21.79]
.958 [24.33]
1.058 [26.87]
1.258 [31.95]
1.458 [37.03]
1.758 [44.65]
2.058 [52.27]
2.258 [57.35]
2.758 [70.05]
3.258 [82.75]
3.758 [95.45]
3.858 [97.99]
4.258 [108.15]
4.558 [115.77]
4.758 [120.85]
5.058 [128.47]
5.258 [133.55]
5.758 [146.25]
6.258 [158.95]
6.758 [171.65]
10.258 [260.55]
CL
.310±.010
[7.88±0.25]
B
.500 [12.70]
.600 [15.24]
.700 [17.78]
.900 [22.86]
1.100 [27.94]
1.400 [35.56]
1.700 [43.18]
1.900 [48.26]
2.400 [60.96]
2.900 [73.66]
3.400 [86.36]
3.500 [88.90]
3.900 [99.06]
4.200 [106.68]
4.400 [111.76]
4.700 [119.38]
4.900 [124.46]
5.400 [137.16]
5.900 [149.86]
6.400 [162.56]
9.900 [251.46]
Keying Plug
.100±.003
[2.54±0.08]
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
Additional receptacle assembly
sizes and solder tail lengths are
available; minimum order
quantities may apply. Consult
Tyco Electronics.
No. of
Pos.
CL
Board Retention Tails
.310±.002
[7.87±0.05]
Technical Documents (page 294):
Application Specification
114-9009
.125
[3.17]
(Localized
Gold Plate Area)
.115
[2.92]
(See Note 2)
.115 or .145
[2.92 or 3.68]
(See Note 2)
Related Product Data:
Product Specification 108-25017
.256
Min.
[6.50]
(See Note 3.)
Part No. 86286-1
(Plugs into receptacle contact)
Material: Natural color nylon
Receptacle Assembly Part Nos.
Receptacle Assembly Part Nos.
with .115 [2.92] Solder Tail Lengths
with .145 [3.68] Solder Tail Lengths
Standard Solder Tails
Board Retention Tails
Standard Solder Tails
Plating A
Plating B
Plating A
Plating B
Plating A
0-532956-1
0-532955-1
0-534204-2
0-534975-5
533009-1
—
2-532955-5
—
—
—
0-532956-2
—
1-534204-0
1-534975-5
—
0-532956-3
0-532955-3
0-534204-9
534975-6
—
0-532956-4
0-532955-4
1-534204-1
534975-7
—
0-532956-5
0-532955-5
0-534204-4
534975-8
533009-5
0-532956-6
0-532955-6
0-534204-3
534975-9
—
0-532956-7
0-532955-7
1-534204-2
1-534975-0
—
0-532956-8
0-532955-8
0-534204-1
1-534975-1
0-533009-8
0-532956-9
0-532955-9
0-534204-5
1-534975-2
0-533009-9
1-532956-0
1-532955-0
1-534204-3
1-534975-3
1-533009-0
1-532956-1
1-532955-1
1-534204-4
—
—
1-532956-2
1-532955-2
0-534204-8
1-534975-4
1-533009-2
1-532956-3
1-532955-3
—
—
1-533009-3
1-532956-4
1-532955-4
—
—
—
1-532956-5
1-532955-5
1-534204-5
—
1-533009-5
1-532956-6
1-532955-6
0-534204-6
0-534975-1
1-533009-6
1-532956-7
1-532955-7
1-534204-6
—
—
1-532956-8
1-532955-8
0-534204-7
0-534975-2
1-533009-8
2-532956-0
2-532955-0
1-534204-7
—
—
2-532956-3
2-532955-3
2-534204-0
0-534975-4
—
Notes: 1. .115 [2.92] tail length is for use with .062 [1.57] PC boards; .145 [3.68] tail length is for use with .093 [2.36] PC boards.
Notes: 2. Receptacle assemblies with low force contacts are available, consult Tyco Electronics.
3. .256 [6.50] minimum positive pin stop to prevent shorting between rows.
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Receptacle Assemblies, Board Mount, Double-Row,
Closed Entry, .100 x .100 [2.54 x 2.54] Centerline (Continued)
Vertical Mount
(with Guide Pin Slots
and Standoffs)
.115
[2.92]
.129
Typ.
[3.28]
.410
[10.41]
.320
[8.13]
Material and Finish:
.100
Typ.
[2.54]
Housing—Thermoplastic, 94V-0 rated,
high temperature compatible
Contacts—Phosphor bronze, duplex
plated .000030 [0.00076] gold on
contact area, .000050-.000100
[0.00127-0.00254] bright tin-lead on
solder area, with entire contact
underplated .000050 [0.00127] nickel
.125
[3.18]
(Localized
Gold Plate Area)
.179
Typ.
[4.55]
±.008
B [±0.20]
.238
[6.05]
.144
[3.68]
Dia.
.069
[1.75]
Typ.
A
.100
[2.54]
.100
[2.54]
.100±.003
[2.54±0.08]
Related Product Data:
Mateable Headers—pages 215-216
Performance Specifications—
page 211
.035±.003
Typ. Dia.
[0.89±0.08]
.100±.003
[2.54±0.08]
Technical Documents (page 294):
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
Product Specification 108-25017
Tolerances not to accumulate within one
connector pattern.
Application Specification
114-9009
Additional receptacle assembly
sizes and solder tail lengths are
available; minimum order
quantities may apply. Consult
Tyco Electronics.
No. of
Pos.
30
40
50
60
70
80
90
100
120
Keying Plug
Dimensions
A
B
1.758 [44.65]
1.400 [35.56]
2.258 [57.35]
1.900 [48.26]
2.758 [70.05]
2.400 [60.96]
3.258 [82.75]
2.900 [73.66]
3.758 [95.45]
3.400 [86.36]
4.258 [108.15]
3.900 [99.06]
4.758 [120.85]
4.400 [111.76]
5.258 [133.55]
4.900 [124.46]
6.258 [158.95]
5.900 [149.86]
Receptacle Assembly
Part Nos.
534972-1
534972-2
534972-3
534972-4
534972-5
534972-6
534972-7
534972-8
1-534972-0
5
Part No. 86286-1
(Plugs into receptacle contact)
Material: Natural color nylon
213
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Receptacle Assemblies, Board Mount, Triple-Row,
Closed Entry, .100 x .100 [2.54 x 2.54] Centerline (Continued)
Horizontal Mount
(with Guide Pin Slots
and Standoffs)
A
.410
[10.41]
.179
Typ.
[4.55]
Material and Finish:
Housing—Thermoplastic, 94V-0 rated,
high temperature compatible
Contacts—Phosphor bronze, plated as
follows:
Plating A—Duplex plated .000030
[0.00076] gold on contact area,
.000050-.000100 [0.00127-0.00254]
bright tin-lead on solder area, with entire
contact underplated .000050 [0.00127]
nickel
.100
Typ.
[2.54]
.100
[2.54]
.338
[8.59]
.144
[3.66]
Dia.
Typ.
.069
[1.75]
.100
[2.54]
.115
[2.92]
.145
[3.68]
.300
[7.62]
.400
[10.16]
.115
[2.92]
Related Product Data:
Mateable Headers—page 218
Performance Specifications—
page 211
.125
[3.18]
(Localized
Gold Plate Area)
B
.145
[3.68]
Tail Length
.035±.003
Typ. Dia.
[0.89±0.08]
.100±.003
[2.54±0.08]
Technical Documents (page 294):
Product Specification 108-25017
.400
[10.16]
Application Specification
114-9009
Additional receptacle assembly
sizes and solder tail lengths are
available; minimum order
quantities may apply. Consult
Tyco Electronics.
.300
[7.62]
.065±.005
[1.65±0.13]
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
Tolerances not to accumulate within one
connector pattern.
No. of
Pos.
72
93
96
150
210
Keying Plug
Dimensions
A
B
2.658 [67.51]
2.300 [58.42]
3.358 [85.29]
3.000 [76.20]
3.458 [87.83]
3.100 [78.74]
5.258 [133.55]
4.900 [124.46]
7.258 [184.35]
6.900 [175.26]
Receptacle Assembly Part Nos.
Plating A
534974-3
1-534974-4
1-534974-5
1-534974-8
1-534974-1
5
Part No. 86286-1
(Plugs into receptacle contact)
Material: Natural color nylon
214
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Headers, Straight Post, Double-Row, .100 x .100 [2.54 x 2.54] Centerline
Pos.
Ref.
Solder Posts and
ACTION PIN Posts
(with Pin Protection
and Guide Pins)
.065
R
[1.66]
(2 Plc.)
1 2 3
.100
[2.54]
.515
[13.08]
.085
[2.16]
.040
[1.02]
(4 Sides)
.200
[5.08]
.130
[3.30]
(2 Plc.)
B
.200
[5.08]
(Localized
Gold Plate
Area)
A
.110
[2.79]
Material and Finish:
Housing—Black thermoplastic, 94V-0
rated
Posts—Phosphor bronze, plated as
follows:
Plating A—Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
bright tin-lead on termination end, with
entire post underplated .000050
[0.00127] nickel
Plating B—Duplex plated .000015
[0.00038] gold on contact area,
.000100-.000200 [0.00254-0.00508]
bright tin-lead on termination end, with
entire post underplated .000050
[0.00127] nickel
Plating C—Selectively plated .000030
[0.00076] gold on contact area and
.000015 [0.00038] gold on termination
end, with gold flash over .000050
[0.00127] nickel on entire post
.320
[8.13]
.440
[11.18]
.130
[3.30]
Board Retention Tails
(where indicated)
.180
[4.57]
.040±.003
[1.02±0.08]
(Finished Hole)
.100±.003
[2.54±0.08]
.090
[2.29]
.180
[4.57]
.0453±.001
[1.02±0.03]
(Drilled Hole)
.100±.003
[2.54±0.08]
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
.025 [0.64] Square
Board Retention Tails
Tolerances not to accumulate within one connector pattern.
Related Product Data:
Mateable Receptacles—
pages 212-213
Performance Specifications—
page 211
ACTION PIN Posts—
pages 167, 168
Application Tooling—
pages 169
Technical Documents (page 294):
Product Specification
108-25017
Application Specification
114-9009
Additional header sizes are
available; minimum order
quantities may apply. Consult
Tyco Electronics.
No. of
Pos.
12
14
16
20
24
30
36
40
50
60
70
72
80
Dimensions
A
.980 [24.89]
1.080 [27.43]
1.180 [29.97]
1.380 [35.05]
1.580 [40.13]
1.880 [47.75]
2.180 [55.37]
2.380 [60.45]
2.880 [73.15]
3.380 [85.85]
3.880 [98.55]
3.980 [101.09]
4.380 [111.25]
B
.500 [12.70]
.600 [15.24]
.700 [17.78]
.900 [22.86]
1.100 [27.94]
1.400 [35.56]
1.700 [43.18]
1.900 [48.26]
2.400 [60.96]
2.900 [73.66]
3.400 [86.36]
3.500 [88.90]
3.900 [99.06]
Header Part Nos. with .180 [4.57] Tail Length
Standard Solder Tails
Board Retention Tails
Plating A
Plating B
Plating A
Plating B
0-102692-1
0-102567-1
1-534978-6
0-534257-5
—
2-102567-3
—
—
1-102692-5
—
1-534978-2
1-534257-4
1-102692-6
1-102567-1
1-534978-3
1-534257-6
0-102692-2
0-102567-2
1-534978-4
0-534257-7
1-102692-7
1-102567-3
1-534978-5
1-534257-8
0-102692-3
0-102567-3
1-534978-6
0-534257-9
1-102692-3
1-102567-2
1-534978-7
1-534257-0
0-102692-4
0-102567-6
1-534978-8
1-534257-5
0-102692-5
0-102567-4
1-534978-9
1-534257-1
1-102692-4
1-102567-0
1-534978-5
1-534257-2
1-102692-8
1-102567-6
1-534978-0
—
0-102692-6
0-102567-8
1-534978-1
1-534257-1
Note: Headers with make first/break last posts can be made available, consult Tyco Electronics.
5
215
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Headers, Straight Post, Double-Row, .100 x .100 [2.54 x 2.54]
Centerline (Continued)
Dimensions
No. of
Pos.
A
86
90
96
100
110
120
130
200
B
4.680 [118.87]
4.880 [123.95]
5.180 [131.57]
5.380 [136.65]
5.880 [149.35]
6.380 [162.05]
6.880 [174.75]
10.380 [263.65]
4.200 [106.68]
4.400 [111.76]
4.700 [119.38]
4.900 [124.46]
5.400 [137.16]
5.900 [149.86]
6.400 [162.56]
9.900 [251.46]
Header Part Nos. with .180 [4.57] Tail Length
Standard Solder Tails
Board Retention Tails
Plating A
Plating B
Plating A
Plating B
1-102692-9
1-102567-7
—
—
1-102692-2
1-102567-4
—
—
0-102692-7
102567-5
1-534978-7
—
0-102692-8
0-102567-9
1-534978-8
0-534257-2
1-102692-0
1-102567-5
1-534978-2
—
0-102692-9
2-102567-7
1-534978-3
0-534257-3
2-102692-0
1-102567-9
1-534978-9
—
1-102692-1
2-102567-1
1-534978-1
1-534257-9
Note: Headers with make first/break last posts can be made available, consult Tyco Electronics Incorporated.
ACTION PIN Post
Replacement Part Nos.
See chart
below
.025 [0.64] Square
ACTION PIN Tails
Dimensions
No. of
Pos.
A
12
14
20
24
36
40
50
60
70
80
90
96
100
120
130
.980 [24.89]
1.080 [27.43]
1.380 [35.05]
1.580 [40.13]
2.180 [55.37]
2.380 [60.45]
2.880 [73.15]
3.380 [85.85]
3.880 [98.55]
4.380 [111.25]
4.880 [123.95]
5.180[131.57]
5.380 [136.65]
6.380 [162.05]
6.880 [174.75]
B
.500 [12.70]
.600 [15.24]
.900 [22.86]
1.100 [27.94]
1.700 [43.18]
1.900 [48.26]
2.400 [60.96]
2.900 [73.66]
3.400 [86.36]
3.900 [99.06]
4.400 [111.76]
4.700 [119.38]
4.900 [124.46]
5.900 [149.86]
6.400 [162.56]
.250 [6.35] Tail Length
Plating A
102824-9
Plating B
1-102824-0
.480 [12.19] Tail Length
Plating A
102824-6
Plating B
102824-2
Plating C
102824-3
.680 [17.27] Tail Length
Plating C
102824-7
Header Part Nos. with ACTION PINPosts
.250 [6.35] Tail Length .480 [12.19] Tail Length .680 [17.27] Tail Length
Plating A
Plating B
Plating A
Plating C
Plating C
102690-1
0-103291-4
—
—
—
—
0-103291-3
—
—
—
1-102690-3 0-103291-6
—
—
—
1-102690-2 0-103291-7
—
—
—
1-102690-3 0-103291-9
—
—
—
1-102690-6 0-103291-2
—
—
—
1-102690-4 1-103291-0
—
—
—
1-102690-5 1-103291-1
—
—
—
1-102690-7 1-103291-2
—
—
—
1-102690-6 1-103291-4
—
—
—
1-102690-1 1-103291-6
—
—
—
1-102690-7 1-103291-8
—
—
—
1-102690-8 1-103291-9
—
—
102777-3
1-102690-9 2-103291-1 0-102691-9 1-102666-1
102777-1
—
—
—
0-102666-9
—
Notes: 1. Other header sizes can be made available upon request.
Headers with ACTION PIN posts are for use with .093 [2.36] nominal or thicker PC boards.
Notes: 2. Application tooling for installing headers with ACTION PIN posts is shown on pages 128 and 129.
3. Headers with .250 [6.35] tail length can be made available with make first/break last contacts,
consult Tyco Electronics.
5
216
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Headers, Right-Angle Post, Double-Row, .100 x .100 [2.54 x 2.54]
Centerline
Card Extender
(with Pin Protection
and Guide Pins)
.762
Max.
[19.35]
.599
[15.21]
.040
[1.02]
Typ.
.100
[2.54]
Material and Finish:
Housing—Black thermoplastic, 94V-0
rated
Posts—Phosphor bronze, plated as
follows:
Plating A—Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
bright tin-lead on solder area, with entire
post underplated .000050 [0.00127]
nickel
Plating B—Duplex plated .000015
[0.00038] gold on contact area,
.000100-.000200 [0.00254-0.00508]
bright tin-lead on solder area, with entire
post underplated .000050 [0.00127]
nickel
A
.320
[8.13]
.320
[8.13]
.065
R
[1.65]
(2 Plc.)
2 3 4
.200
[5.08]
Typ.
Board Retention Tails
(where indicated)
Pos.
Ref.
B
.125
[3.18]
.157
[3.99]
.100
[2.54]
.185
[4.70]
Typ.
.040±.003
[1.02±0.08] .100±.003
(Finished [2.54±0.08]
Hole
w/Bd. Ret.)
.035±.003
Dia. Typ.
[0.89±0.08]
(Standard
Finished Hole)
Related Product Data:
.100
[2.54]
(Localized
Gold Plate
Area)
.157
[3.99]
.100±.003
[2.54±0.08]
.125
[3.18]
.025 [0.64] Square
Board Retention Tails
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
Mateable Receptacles—
pages 212-213
Performance Specifications—
page 211
Tolerances not to accumulate within one
connector pattern.
Technical Documents (page 294):
Product Specification 108-25017
Application Specification
114-9009
Additional header sizes are
available; minimum order
quantities may apply. Consult
Tyco Electronics.
Header Part Nos. with .125 [3.18] Tail Length
Standard Solder Tails
Board Retention Tails
A
B
Plating A
Plating B
Plating A
12
.980 [24.89]
.500 [12.70]
1-102802-2
0-102589-8
0-534245-5
16
1.180 [29.97]
.700 [17.78]
1-102802-4
—
0-534245-4
20
1.380 [35.05]
.900 [22.86]
1-102802-5
1-102589-2
0-534245-6
24
1.580 [40.13]
1.100 [27.94]
1-102802-3
0-102589-6
0-534245-7
30
1.880 [47.75]
1.400 [35.56]
1-102802-6
0-102589-4
0-534245-2
36
2.180 [55.37]
1.700 [43.18]
1-102802-3
0-102589-2
0-534245-8
40
2.380 [60.45]
1.900 [48.26]
0-102802-8
1-102589-3
—
50
2.880 [73.15]
2.400 [60.96]
1-102802-4
0-102589-5
0-534245-1
60
3.380 [85.85]
2.900 [73.66]
1-102802-9
0-102589-7
—
72
3.980 [101.09] 3.500 [88.90]
1-102802-7
1-102589-7
—
80
4.380 [111.25] 3.900 [99.06]
2-102802-5
2-102589-1
1-534245-0
90
4.880 [123.95] 4.400 [111.76] 1-102802-0
1-102589-4
—
100
5.380 [136.65] 4.900 [124.46] 2-102802-6
2-102589-3
1-534245-1
120
6.380 [162.05] 5.900 [149.86] 2-102802-2
1-102589-1
0-534245-3
130
6.880 [174.75] 6.400 [162.56] 1-102802-9
1-102589-9
1-534245-3
Note: Headers with make first/break last posts can be made available, consult Tyco Electronics.
No. of
Pos.
Dimensions
5
217
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Headers, Straight Post, Triple-Row, .100 x .100 [2.54 x 2.54] Centerline
Pos.
Ref.
Solder Posts
(with Pin Protection
and Guide Pins)
1 2
.065
R
[1.65]
(2 Plc.)
3
.100
[2.54]
.615
[15.62]
.100
[2.54]
.200
[5.08]
.085
[2.16]
.040
[1.02]
(4 Sides)
B
A
Material and Finish:
Housing—Black thermoplastic, 94V-0
rated
Posts—Phosphor bronze, plated as
follows:
Plating A—Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
bright tin-lead on termination end, with
entire post underplated .000050
[0.00127] nickel
.200
[5.08]
(Localized
Gold Plate
Area)
.210
[5.33]
.090
[2.29]
.440
[11.18]
.320
[8.13]
Board Retention Tails
(where indicated)
.040±.003
[1.66±0.08]
(Finished Hole)
Related Product Data:
Mateable Receptacles—
page 214
Performance Specifications—
page 211
.100±.003
[2.54±0.08]
Technical Documents (page 294):
Product Specification 108-25017
Application Specification
114-9009
.200
[5.08]
.100
[2.54]
.180
[4.57]
.025 [0.64] Square
Board Retention Tails
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
Additional header assembly sizes
are available; minimum order
quantities may apply. Consult
Tyco Electronics.
5
.0453±.001
[1.151±0.03]
(Drilled Hole)
.180
[4.57]
Tolerances not to accumulate within one
connector pattern.
Dimensions
No. of
Pos.
A
B
72
93
150
210
2.780 [70.61]
3.480 [88.39]
5.380 [136.65]
7.380 [187.45]
2.300 [58.42]
3.000 [76.20]
4.900 [124.46]
6.900 [175.26]
Header Part Nos.
with .180 [4.57] Tail Length
Standard
Board
Solder Tails
Retention Tails
Plating A
Plating A
103264-1
534258-1
—
534258-3
103264-3
—
103264-4
—
218
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Headers, VRM (Voltage Regulator Module), .100 x .100 [2.54 x 2.54] Centerline
Solder Posts and
ACTION PIN Posts (with
Pin Protection, Guide
Ribs, and Latching)
A
B
.515
[13.08]
Material and Finish:
Housing—Beige thermoplastic, 94V-0
rated
Posts—Copper alloy, duplex plated
.000030 [0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
matte tin-lead on termination end, with
entire post underplated .000050
[0.00127] nickel
.110
[2.79]
.120
[3.05]
.320
[8.13]
.440
[11.18]
Related Product Data:
Mateable Receptacles—
pages 212-213
Performance Specifications—
page 211
ACTION PIN Posts—
page 167, 168
Application Tooling—
pages 169
Housing Outline
B
.100
[2.54]
.125
[3.18]
.290
[7.37]
.040 +.003
[1.02 +.08]
.100
[2.54]
.525
[13.33]
Technical Documents (page 294):
Product Specification 108-25017
Application Specification
114-9009
Recommended PC Board Hole Layout
No
of
Pos
30
40
Header Part No.
Dimensions
A
B
Standard Solder Tails
2.450 [62.23]
3.095 [78.62]
3.100 [78.74]
1.400 [35.56]
1.900 [48.26]
1.900 [48.26]
146205-1
—
146315-1
.250 Length ACTION PIN Tails
—
147254-1
—
5
219
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Accessories: End Shrouds for Machine-Applied Posts
Single-Row, .100 [2.54] Centers
Part No. 102338-1
Mating Polarized
Housing
Material:
Black thermoplastic, flame retardant
.066
[1.68]
.164
[4.17]
.290
[7.37]
End
Shroud
.712
[18.08]
Board Mounted
Straight Posts
.050
[1.27]
.059
[1.50] .350
Max. [8.89]
PC Board
Typical Assembly
Break Line for 7 Pos.
or Larger Header
.066
[1.68]
Technical Documents (page 294):
.029
[0.74]
Dia.
Double-Row, .100 x .100 [2.54 x 2.54] Centers
Part No. 102114-1
Material:
Black glass-filled polyester
.405
[10.29]
.280
[7.11]
.050
[1.27]
.150
[3.81]
.890
[22.61]
.059
[1.50]
Max.
5
Break Line for 14 Pos.
or Larger Header
.066
[1.68]
.350
[8.89]
.029
[0.74]
Dia.
220
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Accessories: Barrier Insert, Part No. 87743-1
Material:
Black polyester
.340
[8.64]
.446
[11.33]
.037
[0.94]
.030
[0.76]
.090
[2.29]
Technical Documents (page 294):
.314
[7.98]
The barrier insert can be
used on double row headers
(.100 x .100 [2.54 x 2.54]
centers), including shrouded
versions—3 and 4 sides,
as well as unshrouded
straight post headers. With
one barrier insert several
configurations can be
obtained, providing headers
with capabilities of accepting
various combinations of
polarized and non-polarized
AMPMODU connectors.
For unshrouded headers,
the barrier insert is used to
establish polarization and to
compartmentalize the header.
For shrouded headers, the
barrier insert is used to compartmentalize the header,
while maintaining polarization.
The barrier insert itself is
notched to facilitate cutting
off the ends with a simple
tool such as tin snips or
scissors to achieve the
desired configuration.
.031-.043
[0.79-1.09]
Dia. x .250[
[6.35]
.030
[0.76]
.127
[3.23]
Deep—
remainder
.029±.001
[0.74±0.03]
Dia.
Thru Typ. (2)
.100
[2.54]
.087
[2.21]
45°
.094
[2.39]
.047
[1.19]
Barrier Insert Cutoffs
Fig. 1
Partial Cutoff
(Left and Right Sides)
Fig. 2
Partial Cutoff
(Left Side)
Complete Cutoff
(Right Side)
Fig. 3
Complete Cutoff
(Left Side)
Partial Cutoff
(Right Side)
Fig. 4
Complete Cutoff
(Left and Right Sides)
Typical Barrier Insert Applications
For Unshrouded Double-Row, Straight Post Headers,
.100 x .100 [2.54 x 2.54] Centers
See Fig. 3
See Fig. 4
See Fig. 1
See Fig. 2
Note: All configurations of barrier inserts compartmentalize headers and maintain polarization,
except bar (Fig. 4) configuration, which is used primarily for compartmentalizing headers.
For Shrouded Double-Row, 3 and 4 Sided Headers,
.100 x .100 [2.54 x 2.54] Centers
See Fig. 2
See Fig. 4
See Fig. 1
See Fig. 3
5
Note: Right-angle (Figs. 2 and 3) and “T” (Fig. 1) configurations of barrier insert establish
polarization; bar (Fig. 4) configuration of barrier insert compartmentalizes header.
221
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Accessories: Snap-In Polarizer for Low Profile Headers
Material:
Black thermoplastic, flame retardant
Part Nos.
499991-2 (Packaged 50 per bag)
499991-3 (Packaged 1000 per bag)
.134
[3.40]
.335
[8.51]
Break Line
(See below.)
Related Product Data:
Low Profile Headers used with—
pages 152-157
.335
[8.51]
Break Line
(See below.)
.134
[3.40]
The snap-in polarizer provides military polarization for low
profile headers. Installation of the polarizer is as follows:
Orient the polarizer so that the
polarizer latch is on the same side
as the inner wall (post side) of the
header housing.
Slide the polarizer over the
polarizing slot of the housing until
the latch engages the hole. Snap
off the tab at the break line next to
the housing. Using the remaining
polarizer, repeat the process for the
other housing location.
5
Break Line
Note: For Post Shunts, contact TYCO ELECTRONICS.
222
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
工商网监
湘ICP备2023018690号
