104895-4

AMPMODU Interconnection System Board-to-Board Vertical Receptacles and Headers Product Facts ■ Surface-mount products for parallel board-to-board applications, as well as right-angle board-to-board and cable-to-board applications ■ High density .050 x .050 [1.27x1.27] centerline grid ■ Three board-to-board stack heights: .250 [6.35], .320 [8.13] and .390 [9.91] ■ Non-protrusive metallic holddowns ■ Reliable dual beam receptacle contacts for redundant contact ■ Duplex plated receptacle and post contacts; gold plated on mating areas, tinlead plated on tails ■ Compatible with standard surface-mount processing (VPR and IR) ■ Receptacle and header allow for drainage of processing fluids ■ Tape and reel packaging available, contact Tyco Electronics for details ■ Polarized header and receptacle assemblies ■ Sizes of 10, 20, 30, 40, 50, 60, 70, 80 and 100 positions ■ Recognized under the Component Program of Underwriters Laboratories Inc., File No. E28476 ■ Certified by Canadian Standards Association File No. LR7189 2 Photo 85481 AMPMODU 50/50 Grid Vertical Headers and Receptacles are designed for parallel board-to-board stacking in high density applications. Right-angle board-to-board and cable-to-board applications are also possible, since the vertical receptacles also mate with non-latching right-angle headers (page 17) and the vertical headers also mate with non-latching cable connectors. Available are double row, vertical shrouded headers and receptacles in sizes ranging from 10 through 100 positions (in 10 position increments). Parallel board-to-board stack heights of .250 [6.35], .320 [8.13] and .390 [9.91] are achievable by selection of the appropriate header. The receptacle is the same for all three stack height headers. PC boards and allow surface mounting to both sides of the board. In addition to providing retention during processing, the holddowns are soldered during reflow and therefore provide long term strain relief for the lead solder joints. AMPMODU 50/50 Grid Vertical Headers and Receptacles are compatible with standard surface-mount processes; IR (infrared) and VPR (vapor phase reflow). The surface-mount connectors have been designed so that dimensioning, tolerances, referenced datums, holddown characteristics and packaging methods result in a system that is compatible with robotic assembly. The headers and receptacles feature polarization to prevent misalignment. Three Board Stack Heights .250±.006 [6.35±0.15] .320±.006 [8.13±0.15] Non-Protrusive Metallic Holddowns .390±.006 [9.91±0.15] Non-protrusive metallic holddowns are designed for use in .062 [1.57] or thicker 12 Catalog 1307819 Revised 6-04 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 AMPMODU Interconnection System Board-to-Board Vertical Receptacles, Double Row, .050 x .050 [1.27 x 1.27] Centerline A .120 [3.05] Photo 85482 .028 [0.71] Material and Finish: .050 [1.27] Housing—Glass-filled thermoplastic, black, 94V-0 rated Contacts—Copper alloy; duplex plated .000030 [0.00076] gold in mating area, .000150 [0.00381] tin-lead on solder tail, with entire contact underplated .000050 [0.00127] nickel Holddown—Copper alloy; plated .000150 [0.00381] tin-lead over .000050 [0.00127] nickel Polarizing Tab (For Polarization to Mating Header) .187 [4.75] .050 [1.27] 2 .050 [1.27] Related Product Data: Mating Headers — pages 14, 17 PC Board Layouts — page 15 Performance Specifications — page 22 Technical Documents (page 22): Product Specification 108-1332 Application Specification 114-7010 Packaging: Tube or Tape and Reel No. of Pos. Dimension A 10 .266 [6.75] 20 30 40 50 60 70 80 100 .516 [13.11] .766 [19.46] 1.016 [25.81] 1.266 [32.16] 1.516 [38.51] 1.766 [44.86] 2.016 [51.21] 2.516 [63.91] Tube Receptacle Part Numbers Tape and Reel* No Hold Down w/Vacuum Cover 104652-1 147384-1 147413-1 104652-2 104652-3 104652-4 104652-5 104652-6 104652-7 104652-8 1-104652-0 147384-2 147384-3 147384-4 147384-5 147384-6 147384-7 147384-8 147384-9 147413-3 147413-4 — 147413-2 — — — — * Parts packaged in tape and reel have vacuum pick and place cover. See PC Board Layout on page 15. 13 Catalog 1307819 Revised 6-04 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 AMPMODU Interconnection System Board-to-Board Vertical Headers, Double Row, .050 x .050 [1.27 x 1.27] Centerline .050 [1.27] .225 [5.71] .050 [1.27] Photo 85480 For .250 [6.35] Mated Height A .2255 [5.728] .030 [0.76] .050 [1.27] A Photo 85479 For .320 [8.13] Mated Height 2 .2975 [7.557] .030 [0.76] .050 [1.27] .030 [0.76] .050 [1.27] A Photo 85478 .3675 [9.335] For .390 [9.91] Mated Height Material and Finish: Related Product Data: Housing—Glass-filled thermoplastic, black, 94V-0 rated Contacts—Phosphor bronze; duplex plated .000030 [0.00076] gold in mating area, .000150 [0.00381] tin-lead on solder tail, with entire contact underplated .000050 [0.00127] nickel Holddown—Copper alloy; plated .000150 [0.00381] tin-lead over .000050 [0.00127] nickel Mating Receptacles — page 13, 19 (without latch only) PC Board Layouts — page 15 Performance Specifications — page 22 No. of Pos. Dimension A 10 20 30 40 50 60 70 80 90 100 .372 [9.44] .622 [15.79] .872 [22.14] 1.122 [28.49] 1.372 [34.84] 1.622 [41.19] 1.872 [47.54] 2.122 [53.89] 2.372 [60.24] 2.622 [66.59] Technical Documents (page 22): Product Specification 108-1332 Application Specification 114-7010 Packaging: Tube or Tape and Reel Header Part Numbers .250 [6.35] Mated Height .320 [8.13] Mated Height Tape & Reel* Tubes Tubes Tape & Reel* Hold Down No Hold Down 104655-1 147381-1 147121-1 104656-1 147382-1 104655-3 147381-2 147121-2 104656-2 147382-2 104655-4 147381-3 — 104656-3 147382-3 104655-5 147381-4 — 104656-4 147382-4 104655-6 147381-5 — 104656-5 147382-5 104655-7 147381-6 — 104656-6 147382-6 104655-8 147381-7 — 104656-7 147382-7 104655-9 147381-8 — 104656-8 147382-8 — — — 104656-9 — 1-104655-1 147381-9 — 1-104656-0 147382-9 .390 [9.91] Mated Height Tubes Tape & Reel* Hold Down No Hold Down 104693-1 — 147383-1 104693-2 — 147383-2 104693-3 — 147383-3 104693-4 — 147383-4 104693-5 — 147383-5 104693-6 — 147383-6 104693-7 — 147383-7 104693-8 — 147383-8 104693-9 — — 1-104693-0 147503-1 147383-9 *Parts packaged in tape and reel have vacuum pick and place cover. See PC Board Layout on page 15. 14 Catalog 1307819 Revised 6-04 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 AMPMODU Interconnection System Recommended PC Board Layouts for Vertical Connectors Receptacles .029 [0.74] .050 [1.27] B Spaces at .050 [1.27] = C .162 [4.11] C L of Pattern Detail A .182 [4.62] .091 [2.31] .047 [1.19] 2 Plc. .060 [1.52] Detail A Holddown Detail for Tube Packaged Product D 2 Headers .029 [0.74] .050 [1.27] .110 [2.79] B Spaces at .050 [1.27] = C .010 [0.25] 4 Plc. C L of Pattern .130 [3.30] .065 [1.65] Detail A .056 [1.42] 2 Plc. .060 [1.52] Detail A Holddown Detail for Tape and Reel Product D No. of Pos. B 10 20 30 40 50 60 70 80 90 100 4 9 14 19 24 29 34 39 44 49 Receptacle Dimensions C D .200 [5.08] .450 [11.43] .700 [17.78] .950 [24.13] 1.200 [30.48] 1.450 [36.83] 1.700 [43.18] 1.950 [49.53] 2.200 [55.88] 2.450 [62.23] .320 [8.12] .570 [14.48] .820 [20.83] 1.070 [27.19] 1.320 [33.53] 1.570 [39.88] 1.820 [46.23] 2.070 [52.58] 2.320 [58.93] 2.570 [65.28] B 4 9 14 19 24 29 34 39 44 49 Header Dimensions C .200 [5.08] .450 [11.43] .700 [17.78] .950 [24.13] 1.200 [30.48] 1.450 [36.83] 1.700 [43.18] 1.950 [49.53] 2.200 [55.88] 2.450 [62.23] D .322 [8.17] .572 [14.52] .822 [20.87] 1.072 [27.22] 1.322 [33.57] 1.572 [39.92] 1.822 [46.27] 2.072 [52.62] 2.322 [58.97] 2.572 [65.32] Note: Refer to Tyco Electronics Customer Drawings for additional PC board layout information and dimensional tolerances. 15 Catalog 1307819 Revised 6-04 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 AMPMODU Interconnection System Board-to-Board Right-Angle Headers Product Facts ■ Surface-mount products for right-angle board-to-board and cable-to-board applications ■ Double-row, right-angle shrouded headers ■ High density .050 x .050 [1.27 x 1.27] centerline grid ■ Latching and non-latching versions available ■ Non-protrusive metallic holddowns ■ Metallic tabs, when soldered to PC board pad, provide added mechanical support ■ Duplex plated post contacts; gold plated on mating area, tin plated on tails ■ Compatible with standard surface-mount processing (VPR and IR) ■ Standoffs on header housings allow for drainage of processing fluids ■ All headers are polarized ■ Sizes of 10, 20, 30, 40, 50, 60, 70, 80 and 100 positions ■ Recognized under the Component Program of Underwriters Laboratories Inc., File No. E28476 ■ Certified by Canadian Standards Association File No. LR7189 2 AMPMODU 50/50 Grid Right-Angle Headers will accommodate a variety of high density packaging applications; right-angle board-to-board applications when mated with vertical receptacles (page 13) and right-angle cable-to-board applications when mated with cable connectors (page 19). The small .050 x .050 [1.27 x 1.27] centerline contact spacing allows efficient use of the PC board area. Mechanical support of the headers to the PC board is provided by non-protrusive metallic holddowns designed for .062 [1.57] or thicker PC boards. These holddowns are of the same design as those used in the vertical headers (page 14) and receptacles (page 13). There are also metallic tabs that are soldered to the surfaces of the PC board pads for added support. AMPMODU 50/50 Grid Right-Angle Headers are available in double-row, in either latching or nonlatching versions, and in sizes ranging from 10 through 100 positions (in 10 position increments). The latching version provides positive retention when mated with the latching cable connector (page 19). All headers feature polarization to help prevent misalignment during mating. 16 Catalog 1307819 Revised 6-04 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 AMPMODU Interconnection System Board-to-Board Right-Angle Headers, Double Row, .050 x .050 [1.27 x 1.27] Centerline Non-Latching Header A .050 [1.27] Typ. .050 [1.27] .213 [5.41] Latching Header .352 [8.94] .050 [1.27] .430 [10.92] 2 .029 [0.74] Typ Material and Finish: .065 [1.65] Typ. Housing — Liquid crystal polymer, black, 94V-0 rated Contacts — Brass; duplex plated .000030 [0.00076] gold in mating area, .000150 [0.000381] tin-lead on solder tail, with entire contact underplated .000050 [0.00127] nickel Holddown — Copper alloy; plated .0000150 [0.00381] tin-lead over .000050 [0.00127] nickel B Spaces at .025 = C [0.64] .140 [3.56] .085 [2.16] .340 [8.64] .175 [4.45] .100 [2.54] Min Related Product Data: Mating Receptacles — page 13, 19 Performance Specifications — page 22 Technical Documents (page 22): .047 Dia [1.19] Plated-Thru Hole (2 Plc) .305 [7.75] .063 [1.57] (2 Plc) D .190 [4.83] (2 Plc) .136 [3.45] (2 Plc) Recommended PC Board Layout Note: Refer to Tyco Electronics Customer Drawings for additional PC board layout information and dimensional tolerances. Product Specification 108-1443 Application Specification 114-7010 Packaging: Tube Dimensions No. of Pos. A B C D 10 20 30 40 50 60 70 80 100 .630 [16.00] .880 [22.35] 1.130 [28.70] 1.380 [35.05] 1.630 [41.40] 1.880 [47.75] 2.130 [54.10] 2.380 [60.45] 2.880 [73.15] 9 19 29 39 49 59 69 79 99 .225 [5.72] .475 [12.07] .725 [18.42] .975 [24.77] 1.225 [31.12] 1.475 [37.47] 1.725 [43.82] 1.975 [50.17] 2.475 [62.87] .550 [13.97] .800 [20.32] 1.050 [26.67] 1.300 [33.02] 1.550 [39.37] 1.800 [45.72] 2.050 [52.07] 2.300 [58.42] 2.800 [71.12] Header Part Numbers Latching Non-Latching 104895-1 104895-2 104895-3 104895-4 104895-5 104895-6 104895-7 104895-8 1-104895-0 104894-1 104894-2 104894-3 104894-4 104894-5 104894-6 104894-7 104894-8 1-104894-0 17 Catalog 1307819 Revised 6-04 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 AMPMODU Interconnection System Cable-to-Board Connectors Product Facts ■ Double-row receptacle connectors provide cableto-board connection capabilities for vertical headers (non-latching) and right-angle headers (latching and non-latching) ■ IDC (Insulation Displacement Crimp) mass termination of solid or stranded round conductor .050 [1.27] centerline ribbon cable with PVC or polyethylene insulation ■ Accommodates ribbon cable conductor sizes of 28 AWG [0.08-0.09 mm2] and 30 AWG [0.05 mm2] and insulation diameters up to .036 [0.91] maximum ■ Reliable single beam receptacle contact design ■ Duplex plated receptacle contacts; gold plated in mating area, bright tin-lead in termination area ■ Terminating covers (sold separately) provide both strain relief and protection to the termination area ■ Sizes of 10, 20, 30, 40, 50, 60, 70, 80 and 100 positions ■ Connectors available with or without metal latch ■ Connectors without latches are polarized to help prevent mismating ■ Recognized under the Component Program of Underwriters Laboratories Inc., File No. E28476 ■ Certified by Canadian Standards Association File No. LR7189 2 These double-row cable connectors, with a .050 x .050 [1.27 x 1.27] centerline contact spacing, provide cable-to-board connection capabilities for the AMPMODU 50/50 Grid Connector System. Cable connectors without a latch will mate with the vertical headers (page 14), while cable connectors with or without a latch can be used to mate with the right-angle headers (page 17). The cable connectors feature reliable singlebeam IDC (insulation displacement crimp) contacts which are duplex plated with .000030 [0.00076] gold. These contacts can be mass terminated to either solid or stranded round conductor ribbon cable with conductor sizes of 28 AWG [0.08-0.09 mm2] and 30 AWG [0.05 mm2] and a maximum insulation diameter of .036 [0.91]. During termination, the terminating covers, which must be purchased separately, assist in guiding the wire into the IDC contacts, then provide strain relief when fully seated. Actual termination is accomplished with the AMP manual tooling shown on page 21. header. The cable connector without a metal latch features polarization to help prevent mismating. All connectors are available in sizes ranging from 10 through 100 positions (in 10 position increments). The latching version of the cable connector is equipped with a metal latch which provides positive retention of the receptacle cable connector when mated with a surfacemounted right-angle 18 Catalog 1307819 Revised 6-04 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 AMPMODU Interconnection System Cable-to-Board Receptacle Connectors, Double Row, .050 x .050 [1.27 x 1.27] Centerline (Continued) A Material and Finish: Housing — Thermoplastic, black, 94V-0 rated Latch — Stainless steel Contacts — Phosphor bronze; duplex plated .000030 [0.00076] minimum gold in mating area, .000050 [0.00127] minimum bright tin-lead in termination area, with entire contact underplated .000050 [0.00127] minimum nickel .280 [7.11] .627 [15.94] 2 .690 [17.56] Related Product Data: Mating Headers — page 14, 17 (latching) Terminating Covers (Must be Purchased Separately, 2 Required per Connector) — page 20 Termination Tooling — page 21 Performance Specifications — page 22 D .120 [3.05] .050 [1.27] Typ B Spaces at .050 [1.27]= C Technical Documents (page 22): .284 .327 [7.21] [8.31] Product Specification 108-1443 Application Specification 408-9817, 408-9909 Packaging: Tube .050 [1.27] Dimensions No. of Pos. A B C D 10 20 30 40 50 60 70 80 100 .578 [14.68] .828 [21.03] 1.078 [27.38] 1.328 [33.73] 1.578 [40.08] 1.828 [46.43] 2.078 [52.78] 2.328 [59.13] 2.828 [71.83] 4 9 14 19 24 29 34 39 49 .200 [5.08] .450 [11.43] .700 [17.78] .950 [24.13] 1.200 [30.48] 1.450 [36.83] 1.700 [43.18] 1.950 [49.53] 2.450 [62.23] .266 [6.76] .516 [13.11] .766 [19.46] 1.016 [25.81] 1.266 [32.16] 1.516 [38.51] 1.766 [44.86] 2.016 [51.21] 2.516 [63.91] Receptacle Part Numbers With Latch Without Latch 104892-1 104892-2 104892-3 104892-4 104892-5 104892-6 104892-7 104892-8 1-104892-0 104893-1 104893-2 104893-3 104893-4 104893-5 104893-6 104893-7 104893-8 1-104893-0 19 Catalog 1307819 Revised 6-04 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 AMPMODU Interconnection System Terminating Covers for Cable Connectors Material: Glass-filled thermoplastic, black, 94V-0 rated A Related Product Data: .191 [4.85] Connectors used with Covers — page 19 Termination Tooling — page 21 2 Technical Documents (page 22): .277 [7.04] Product Specification 108-1443 Application Specification 408-9817, 408-9909 Packaging: Plastic bag No. of Dimension Terminator Cover Pos. A Part Numbers 10 .565 [14.35] 104891-1 20 .815 [20.70] 104891-2 30 1.065 [27.05] 104891-3 40 1.315 [33.82] 104891-4 50 1.565 [39.75] 104891-5 60 1.815 [46.10] 104891-6 70 2.065 [52.45] 104891-7 80 2.315 [58.80] 104891-8 100 2.815 [71.50] 1-104891-0 Note: Terminating covers must be purchased separately, two are required for each cable connector. 20 Catalog 1307819 Revised 6-04 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 AMPMODU Interconnection System Application Tooling for Cable Connectors The AMP Manual Miniature Application Frame Assembly 91295-1, equipped with a Cover Closing Kit 543518-1, is used for the IDC termination of ribbon cable to the cable connectors shown on page 19. Prior to termination, the covers must be partially assembled onto a connector housing, the cable inserted between the covers and contacts and the covers preclosed by hand, clamping the cable in place. In the Manual Miniature Application Frame Assembly, the covers are fully seated to complete the mass termination and provide strain relief for the completed connection. 2 Photo 94522 Manual Miniature Application Frame Assembly 91295-1 with Cover Closing Kit 543518-1 For tooling information, call Technical Support Center 1-800-522-6752. Note: Refer to AMP Instruction Sheets 408-9817 (Frame Assembly 91295-1) and 408-9909 (Cover Closing Kit 543518-1) for complete termination/tooling information. 21 Catalog 1307819 Revised 6-04 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 AMPMODU Interconnection System Performance Specifications Board-to-Board Connectors, Vertical and Right-Angle Mating Force: 6.4 oz (1.78 N] max. per contact Unmating Force: 1.0 oz [0.28 N] min. per contact Durability: Tested to 200 cycles min. Current Rating: (30°C T rise): .5 ampere per contact Operating Temperature Range: -65°C to +105°C Termination Resistance: 16 milliohms max. (initial) Insulation Resistance: 5000 megohms min. (initial) Dielectric Withstanding Voltage: 300 VAC Cable-to-Board Connectors Mating Force: 6.4 oz (1.78 N] max. per contact Unmating Force Without Latch: .5 oz [0.14 N] min. per contact Durability: Tested to 200 cycles min. Current Rating: (10°C T rise): .5 ampere per contact Operating Temperature Range: -65°C to +105°C Termination Resistance: 25 milliohms max. (initial and final) Insulation Resistance: 5000 megohms min. (initial) Dielectric Withstanding Voltage: 300 VAC 2 Technical Documents Various technical documents are available for your use: Product Specifications describe technical performance characteristics and verification tests. They are intended for the Design, Component and Quality Engineer. 108-1332 AMPMODU 50/50 Grid Vertical Board-to-Board Connectors 108-1443 AMPMODU 50/50 Grid Right-Angle Board-to-Board and Cable Connectors Application Specifications describe requirements for using the product in its intended application and/or crimping information. They are intended for the Packaging and Design Engineer and the Machine Setup Person. 114-7010 AMPMODU 50/50 Grid Connector System Instruction Sheets provide instructions for assembling or applying the product. They are intended for the Manufacturing Assembler or Operator. 408-9817 AMP Manual Miniature Application Frame Assembly 91295-1 408-9909 AMP Cover Closing Kit 543518-1 22 Catalog 1307819 Revised 6-04 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 AMPMODU Interconnection System AMPMODU System 50 Connectors (Page 50) (Page 42) (Page 36) (Page 38) (Page 37) (Page 29) (Page 43) (Page 27) Double Row, .025 Ribbon Cable Mount Receptacle (Page 54) (Page 31) (Page 32) (Page 48) (Page 28) (Page 26) (Page 30) (Page 35) (Page 25) The AMPMODU System 50 connector family includes a wide variety of high density board-to-board (thru-hole and surface-mount) and cable-to-board connectors. AMPMODU System 50 is composed of one- and tworow receptacles and post headers on .050 x .100 [1.27 x 2.54] spacing between contacts for extreme density and efficient use of printed circuit board area. AMPMODU System 50 receptacles and header assemblies can be categorized in three groups: board-mount headers, board-mount receptacles and cable-to-board receptacles. Receptacle contacts and mating .015 [0.38] square posts are formed from high conductivity copper alloy and are selectively plated with gold for higher performance and reliability. Board-mounted thru-hole post headers and receptacle connectors are available for right-angle and vertical mating configurations. Surfacemounted connectors are available in vertical, double row styles for parallel stacking applications. Shrouded post headers provide polarization to mating cable receptacles and aid alignment of mating connectors. Unshrouded headers allow close stacking of daughter cards. Vertical stacking connectors space parallel mated boards as shown in the illustration on page 63. Housings on all boardmount assemblies are made of high temperature tolerant materials and incorporate stand-offs for free drainage of flux cleaning solutions. (Page 48) ■ Recognized under Connectors for mass termination to FFC cable or flexible etched circuitry have dual beam contacts; options include shielded cable and solder tabs. Both types of cable connectors are available as component parts and as completed assemblies. *CSA certification pending on certain products, as noted. The variety of components and application possibilities, combined with small size and outstanding quality, make AMPMODU System 50 perfect for high density systems. the Component Program of Underwriters Laboratories Inc. File No. E28476 ■ Certified by Canadian Standards Association*, File No. LR 7189 3 mating headers (thru-hole or surface-mount). Ribbon cable connectors mass terminate 30 AWG [0.05 mm2] solid and 32 AWG [0.03 mm2] stranded, .025 [0.64] centerline ribbon cable with PVC or TEFLON insulation. ® Dimensioning: Dimensions are in inches and millimeters. Values in brackets are metric equivalents. Metric symbols used are: mm (millimeter) cm (centimeter) m (meter) mm2 (square millimeter) C (Celsius) N (newton) kg (kilogram) ■ Produced under a Quality Management System certified to ISO 9001 A copy of the certificate is available upon request. Cable-to-board connectors have integral latches for positive locking to shrouded 23 Catalog 1307819 Revised 6-04 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967