10603-8-0

SPECIFICATION CONTROL DRAWING TITLE 10603 Date SPECIAL PURPOSE HOOKUP WIRE, DOUBLE INSULATION, 600 VOLT Revision 1-27-14 AB This specification sheet forms a part of the latest issue of Raychem Specification 35, to the extent specified herein. CONDUCTOR - TIN-COATED COPPER PRIMARY INSULATION - THERMORAD N COLOR - BLACK JACKET - THERMORAD O COLOR - BLACK TABLE I. CONSTRUCTION DETAILS FINISHED WIRE WIRE SIZE (AWG) or (MCM) CONDUCTOR STRANDING (number x AWG) MAXIMUM DIAMETER OF STRANDED CONDUCTOR (inch) 10603-14-0 14 37 x 30 .075 3.11 .175 ± .005 26.9 10603-12-0 12 37 x 28 .089 2.02 .189 ± .006 32.6 10603-10-0 10 37 x 26 .113 1.26 .213 ± .006 46.6 10603-8-0 8 133 x 29 .173 .701 .280 ± .008 79.6 10603-6-0 6 133 x 27 .217 .445 .324 ± .010 115. 10603-4-0 4 133 x 25 .274 .280 .380 ± .011 170. 10603-2-0 2 665 x 30 .340 .183 .466 ± .014 269. 10603-0-0 0 1045 x 30 .425 .116 .560 ± .017 404. 10603-00-0 00 1330 x 30 .475 .091 .616 ± .018 503. PART NUMBER 1/ MAXIMUM RESISTANCE AT 20°C (ohms/1000 ft.) DIAMETER (inch) MAXIMUM WEIGHT (lbs/1000 ft.) 10603-000-0 000 1665 x 30 .540 .071 .669 ± .020 609. 10603-0000-0 0000 2109 x 30 .605 .056 .803 ± .024 815. 10603-250-0 250 2499 x 30 .716 .045 .932 ± .028 1044. 10603-350-0 350 3458 x 30 .840 .032 1.066 ± .032 1415. Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice. Tyco Electronics Corporation also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer. 1/ COLORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. OTHER CODES AND SUFFIXES MAY BE ADDED TO THE PART NUMBER, AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER. Thermorad, Raychem, TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Page 1 of 2 DIMENSIONS ARE IN INCHES AND, UNLESS OTHERWISE DESIGNATED, ARE NOMINAL. THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN. REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID. Raychem Wire & Cable 501 Oakside Avenue Redwood City, CA 94063-3800 Phone: 1-800-227-8816 Fax: 1-650-361-6297 © 2012-2014 Tyco Electronics Corporation. All rights reserved. Revision SPECIFICATION CONTROL DRAWING Page 2 of 2 SCD Number AB 10603 TABLE II. PERFORMANCE DETAILS BEND TESTING MANDREL DIAMETER (inches) (± 3%) PART NUMBER 1/ IMMERSION, LIFE CYCLE, AND ACCELERATED AGING WEIGHT (lbs) (± 3%) COLD BEND IMMERSION, LIFE CYCLE, AND ACCELERATED AGING COLD BEND 10603-14-0 3.00 3.00 2.00 5.00 10603-12-0 3.00 3.00 2.00 6.00 10603-10-0 3.00 3.00 2.00 6.00 10603-8-0 3.00 3.00 2,00 10.0 10603-6-0 4.00 4.00 2.00 10.0 10603-4-0 6.00 6.00 3.00 15.0 10603-2-0 8.00 8.00 3.00 15.0 10603-0-0 10.0 10.0 4.00 20.0 10603-00-0 12.0 12.0 6.00 30.0 10603-000-0 13.5 13.5 6.00 30.0 10603-0000-0 15.0 15.0 6.00 30.0 10603-250-0 18.5 18.5 6.00 30.0 10603-350-0 21.0 21.0 6.00 30.0 WIRE RATINGS AND ADDITIONAL REQUIREMENTS TEMPERATURE RATING: 125°C Maximum continuous conductor temperature VOLTAGE RATING: 600 volts (rms) at sea level ACCELERATED AGING: 175 ± 4°C for 4 hours CONCENTRICITY: 70% (minimum) FLAMMABILITY: Self extinguishing within 60 seconds (maximum), 25% (maximum) of flag burned; no flaming of cotton INSULATION ELONGATION AND TENSILE STRENGTH: Each Layer, Elongation, 100% (minimum) Tensile Strength, 1500 lbf/in² (minimum) INSULATION FLAWS: Spark Test, 5.7 kV (rms) at 3 kHz Impulse Dielectric Test, 8.0 kV (peak) INSULATION RESISTANCE: 100 megohms for 1000 ft. (minimum) JACKET THICKNESS: .0300 in. (nominal), AWG 14-10 .0375 in. (nominal), AWG 8-4 .0400 in. (nominal), AWG 2-000 .0600 in. (nominal), AWG 0000-350 MCM LIFE CYCLE: 150 ± 3°C for 96 hours LOW TEMPERATURE-COLD BEND: -55 ± 2°C for 4 hours OIL RESISTANCE: Brayco 883 (or Royco 770) per MIL-PRF-46170, 20% (maximum) swell after 20 hours at 90°C; SAE Grade 15W-40 Lubricating Oil per MIL-PRF-2104, 20% (maximum) swell after 20 hours at 90°C; SAE Grade 30 Lubricating Oil, 20% (maximum) swell after 20 hours at 90°C SHRINKAGE: 150 ± 3°C for 4 hours, 0.5 in. (maximum) sum of both ends VOLTAGE WITHSTAND (Post Environmental): 3000 volts (rms) Replaces 34/7010 1/ See footer section on page 1