1062-20-0222-PS

4 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 2000 SOLID CONT. SIZE 4 4 7 8 10 12 12 16 16 16 C 14 16 13 20 20 14 10 B LOC 4 RECOMMENDED MIN CONT. STRIP LENGTH RETENTION 2 AWG [mm ] INCHES [mm] LBS [N] 4 .430-.492 35 5960-203-04XX 5962-203-04XX [25.0-21.0] [10.92-12.50] [156] 6 .430-.492 35 0460-204-04XX 0462-203-04XX [16.0-13.0] [10.92-12.50] [156] 8-10 .430-.492 35 0460-204-08XX 0462-203-08XX [10.0-5.0] [10.92-12.50] [156] 12-14 .222-.284 30 0460-204-12XX 0462-203-12XX [3.0-2.0] [5.64-7.21] [134] 16-20 .250-.312 25 0460-002-16XX 0462-004-16XX [1.5-0.5] [6.35-7.92] [111] 14 .250-.312 25 0460-215-16XX 0462-209-16XX [2.0] [6.35-7.92] [111] 16-20 .250-.312 25 0460-202-16XX 0462-201-16XX [1.5-0.5] [6.35-7.92] [111] 16-20 .250-.312 [1.5-0.5] [6.35-7.92] 16-18 .156-.218 0460-010-20XX 0462-005-20XX [1.0-0.75] [3.96-5.54] 20 .156-.218 0460-202-20XX 0462-201-20XX [0.5] [3.96-5.54] 20 .156-.218 2325531-1 2325530-1 [0.5] [3.96-5.54] 2325584-1 DEUTSCH PERFORMANCE SPECIFICATIONS REQUIRE THE USE OF DEUTSCH APPROVED 8. SEE SHEET 2 FOR STAMPED AND FORMED CONTACTS. 7 CONTACT FACTORY FOR AVAILABLE PLATING FOR SPECIFIC CONTACTS. 6 NOTED MAXIMUM RATED CURRENT DEPENDS ON CONTACT SIZE. ACTUAL RATED CURRENT DEPENDS ON WIRE SIZE. 5 WIRE AND INSULATION RANGES ARE FOR REFERENCE ONLY. ACTUAL INSULATION RANGE DEPENDS ON CONNECTOR GROMMET. THE FOLLOWING CRIMP INFORMATION DRAWINGS ARE THE CONTROLLING DOCUMENTS: "SOLID" CONTACTS: SIZE "STAMPED" CONTACTS: SIZE 0425-205-0000 4-20 114-151006 12 114-151002 12 114-151000 OR 114-151001 16 114-151003 20 TENSILE LBS [N] 300 [1334] 300 [1334] 125-90 [556-400] 75-70 [334-311] 35-20 [156-89] 70 [311] 35-20 [156-89] 35-20 [156-89] 20 [89] 20 [89] 20 [89] 25 [111] 20 [89] 20 [89] 20 [89] PULL RATE OF 1.0 INCH [25.4] PER MINUTE MAXIMUM. ACTUAL STRENGTH DEPENDS ON WIRE SIZE. THIS CONTACT IS A SLEEVELESS SOCKET DESIGN. 2. FORCES ARE IN "LBS" (POUNDS) AND 1 CONSULT FACTORY FOR MORE INFORMATION. SEE CRIMP INFORMATION DRAWINGS FOR MORE PART NUMBERS. 14 6 V1 9 DM ADD NOTE 15 11APR2018 JA DM 9 60 CONTACT RESISTANCE STRENGTH 25 WIRE TEST AWG CURRENT 13 13 13 4 100 10 40 60 10 13 12 7.5 14 16 7.5 18 7.5 MILLIVOLT MILLIVOLT DROP DROP SOLID 60 8 60 60 25 N/A 18 60 25 S & F N/A N/A N/A 100 60 13 100 100 60 10 PN PN PN PN 2325529-1 2325584-1 2325531-1 2325530-1 100 60 100 20 7.5 60 100 LESS REFERENCE(DROP-THRU) WIRE MATERIAL SOLID PLATING OPTIONS: 7 31=GOLD 90 OR 141= NICKEL SIZE 4 [6 AWG] PIN ONLY 141=NICKEL 309=TIN S & F PLATING OPTIONS: 22=NICKEL 44=GOLD 66=TIN/NICKEL 77=TIN 88=SELECTIVE GOLD MATERIALS AND PLATINGS ARE RoHS COMPLIANT 12 THIS CONTACT IS USED FOR HIGH DURABILITY APPLICATIONS. IDENTIFIED BY ONE BLUE STRIPE. 11 THIS CONTACT IS AN ULTRASONIC DESIGN. TOLERANCES UNLESS OTHERWISE SPECIFIED: PLC PLC PLC PLC PLC 26MAY2000 CHK 25JUN2012 APVD 02JUL2012 B.BYFORD D.MEYER R.REED NAME APPLICATION SPEC SIZE WEIGHT STANDARD SPECIFICATION B TE Connectivity PRODUCT SPEC ANGLES FINISH C GOLD PLATING IS RECOMMENDED FOR DRY CIRCUIT APPLICATION = (