1064559-1

RF Coax Connectors SSMT Surface Mount Interconnect System Microminiature Surface Mount RF Connectors Product Facts ■ 3.0 [.118] mated height ■ Excellent interface retention ■ Flexible micro-coax cable ■ 360 degree mated rotation ■ Tape and Reel packaging available The Tyco Electronics SSMT surface mount Interconnect System is designed to provide superior electrical and mechanical performance for wireless communication applications. The SSMT system occupies less printed circuit board (PCB) real estate than conventional through hole coaxial connectors. An innovative microstrip mounting pattern and plug receptacle design ensure reliable grounding and PCB retention characteristics. The SSMT Interconnect System allows closer pitch/spacing, standing 3.0 [.118] (fully mated height) off the board. The mated SSMT interface allows 360 degrees of rotation providing maximum PCB design flexibility. It has been designed to provide optimal retention for applications where shock, vibration or cable flexure may be encountered. Force to disengage by cable load (cam-out) exceeds 300 grams. The SSMT system is designed to provide the performance of much larger industry standard connectors. The SSMT Interconnect System consistently achieves broad band electrical performance through 6 GHz with a maximum VSWR of 1.20:1 at 2 GHz. This broad band performance establishes a reliable interface that can be utilized for future system upgrades without concern for performance degradation. The SSMT utilizes a common plug receptacle, part number 1251802-1, which is designed for high volume assembly using surface mount technology and is available in tape and reel packaging for automatic pick and place board assembly. The mating cable jack is available terminated to a highly flexible microcoax cable as either a pigtail, jumper or standard interseries connector assembly to meet your needs. The SSMT Interconnect System can be manually mated, facilitating high volume assembly and eliminating the need for special engagement tooling. The SSMT interface design aligns the center contacts prior to full mating to ensure a robust mechanical engagement. Interface durability is rated at 100 mating cycles. 212 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SSMT Surface Mount Interconnect System (Continued) Specifications General Materials SMT Plug Housing: Polyphenylene Sulfide (PPS) Contacts: Copper Alloy Outer Contact: Beryllium Copper Inner Contact: Beryllium Copper Dielectric: Polypropylene, GF Plug and cable jack - Contacts: Gold plate over nickel plate SSMT Cable Jack Finish Electrical Frequency Nominal Impedance Voltage Rating VSWR (Mated Pair) Insulation Resistance Dielectric Withstanding Voltage Contact Resistance (Connectors Only) Center Contact Outer Contact Insertion Loss (Connectors Only) dc - 6 GHz 50 Ohms 250 Volts (VRMS Maximum) @ Sea Level 1.20:1 Maximum @ 2 GHz 1.40:1 Maximum @ 6 GHz 5000 Megohms Minimum 500 Volts (VRMS Minimum) @ Sea Level 15 milliohms Maximum 10 milliohms Maximum .15dB Max. @ 6 GHz Mechanical Connector Durability Tape/Reel Packaging (Plug) Force to Engage Force to Disengage Force to Disengage by Cable Load (camout) 100 mating cycles 12mm per EIA-481 5.5 lbs. Max. (3.5 lbs. typ.) (2.0 lbs. typ.) 4.0 lbs. Max. (2.0 lbs. typ.) 300 Grams Min. (800 Grams typ. initial mate) Environmental Temperature Rating (Mated Pair) Resistance to Solder Heat –40°C (–40°F) to +125°C (257°F) Infrared, convection and vapor phase solderable (plug only). Maximum reflow time/temperature not to exceed 260°C for 3 minutes. Cable Specifications Materials Jacket: Shield: Dielectric: Center Conductor: Minimum Bend Radius Insertion Loss (Cable Only) Center Conductor Resistance FEP (polytetrafluoroethylene) Silver plated copper wire, 44 AWG, 90% min. coverage PTFE ( polytetrafluoroethylene) Silver plated copper clad steel, 30 AWG 6.35mm (.250 inch) 0.5 dB/ft., 2.0 dB/m @ 1 GHz 0.9 dB/ft., 3.0 dB/m @ 2 GHz .25 Ohms per foot average. 819 milliohm/meter Nom.; 250 milliohm/Ft. Nom. 1.3 Dia. Ref. [.052] Outer Jacket 1.0 Dia. Ref. [.040] Shield (Braid) 0.8 Dia. Ref. [.030] Dielectric 0.3 Dia. Ref. [.010] Center Conductor 213 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SSMT Surface Mount Interconnect System (Continued) Straight SMT PCB Mount Plug Receptacle Ground Terminal (3 Plcs.) 4.5 [.177] Center Contact (Pin) 2.1 [.081] 4.0 [.157] 2.1 [.049] 5.0 [.197] 4.5 [.177] 1.0 [.039] 4 Plcs. Center Contact Terminal Outer Contact 1.2 [.047] 0.5 VIA Holes [.020] 3 Plcs. 0.5 [.020] 4 Plcs. 0.6 [.025] Packaging Bulk 178 Dia. Taping 7.0 330 Dia. Taping 13.3 5.3 [.207] 0.4 [.015] 0.6 [.024] 1.2 [.047] 3.0 [.118] Quantity Multiple of 100 Part No. 1251802-1 800 pcs/reel 1083946-1 3000 pcs/reel 1055689-1 Center Contact Terminal 2.9 [.113] 1.6 (See Note 2) [.064] (See Note 2) 1.2 [.047] 7.0 [.274] 9.0 [.354] Notes: 3.0 6.0 [.118] [.236] 0.5 [.019] 3.3 [.128] 1.2 [.047] 3.3 [.128] 1 oz. Copper [.0014] Area Free of Solder Mask 1. Printed wiring board material: glass epoxy. FR-4 or similar, relative permittivity: 4.8, 1 oz. copper clad both sides. 2. These dimensions valid for 1.6 [.062] board thickness. Recommended Mounting Pattern for Microstrip Line Right-Angle Jack to Jack Cable Assembly Assembly Length (A) 100 [4.0] 200 [8.0] 305 [12.0] Part No. 1064524-1 1064530-1 1064533-1 3.4 Ref. [.132] 2.1 Ref. [.081] 5.3 Ref. [.208] SSMT Jack Length A Centerline to Centerline 1.3 Ref. [.052] Cable 2.5 Dia. [.100] Ref. Notes: 1. Consult Tyco Electronics for non-standard cable lengths. Length A Tolerances. Length A Tolerance 50 To 100 [3.94] ± 3 [± .12] 101 To 500 [3.98 to 19.69] ± 5 [± .20] Over 500 [19.69] ± 10 [± .39] 2. Connector centerlines align ± 30° as shown for lengths of 165 [6.5] or less. Cable assemblies over 165 [6.5] have randomly aligned connectors. Note: Part Numbers are RoHS compliant except:
Indicates non-RoHS compliant. 214 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SSMT Surface Mount Interconnect System (Continued) Right-Angle Jack to Jack Cable Assembly (180° Offset) Assembly Length (A) 100 [4.0] Part No. 1082845-1 Length A Centerline to Centerline 2.1 Ref. [.081] 5.3 Ref. [.208] SSMT Jack Ø 2.5 [.100] 1.3 Ref. Cable [.052] Notes: 1. Consult Tyco Electronics for non-standard cable lengths. Cable length tolerance: Length A Tolerances. Length A Tolerance 50 To 100 [3.94] ± 3 [± .12] 101 To 500 [3.98 to 19.69] ± 5 [± .20] Over 500 [19.69] ± 10 [± .39] 2. To avoid damaging the cable, minimize time at temperature while soldering and/or applying heat to unterminated end of cable. Right-Angle Jack Cable Pigtail Assembly Length (A) 100 [4.0] 200 [8.0] 305 [12.0] 510 [20.0] Part No. 1064535-1 1064538-1 1064540-1 1064542-1 3.4 Ref. [.132] 2.1 Ref. [.081] 5.3 Ref. [.208] Length A Centerline to Cable End SSMT Jack 2.5 Dia. [.100] Ref. 1.3 Ref. Cable [.052] Notes: 1. Consult Tyco Electronics for non-standard cable lengths. Cable length tolerance: Length A Tolerances. Length A Tolerance 50 To 100 [3.94] ± 3 [± .12] 101 To 500 [3.98 to 19.69] ± 5 [± .20] Over 500 [19.69] ± 10 [± .39] 2. To avoid damaging the cable, minimize time at temperature while soldering and/or applying heat to unterminated end of cable. Note: Part Numbers are RoHS compliant except:
Indicates non-RoHS compliant. 215 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SSMT Surface Mount Interconnect System (Continued) Inter-Series Cable Assemblies Notes: 1. Consult Tyco Electronics for non-standard cable lengths: Length A Tolerances. Length A Tolerance 50 To 100 (3.94) ± 3 (± .12) 101 To 500 (3.98 to 19.69) ± 5 (± .20) Over 500 (19.69) ± 10 (± .39) 2. Connectors are randomly aligned unless otherwise noted. SMA Straight Plug 3.4 Ref. [.132] Length A Reference Plane to Centerline 19.2 Ref. 1.3 Dia. Ref. [.757] [.052] Cable Assembly Length (A) 100 [4.0] 200 [8.0] 305 [12.0] 2.1 Ref. [.081] SSMT Right Angle Jack Part No. 1064543-1 1064552-1 1064560-1 Note: 1064552-1 recommended for customer system verification. 2.5 Dia. Ref. [.100] SMA Bulkhead Jack Length A Reference Plane to Centerline 1.3 21.3 Ref. [.052] [.839] Dia. Ref. Cable 7.9 Hex. [.312] 3.4 Ref. [.132] 2.1 Ref. [.081] 2.5 Dia. Ref. [.100] SSMT Right 3.2 Max. Panel Angle Jack [.125] Thickness 5.4 Dia. [.250] Min. Assembly Length (A) 100 [4.0] 200 [8.0] 305 [12.0] Part No. 1064544-1 1064553-1 1064561-1 Assembly Length (A) 100 [4.0] 200 [8.0] 305 [12.0] Part No. 1064546-1 1064555-1 1064563-1 6.0 [.235] Min. Recommended Mounting Hole SMB Bulkhead Jack 7.4 [.290] 6.4 Hex. [.250] Length A Reference Plane to Centerline 17.1 Ref. 1.3 [.675] [.052] Dia. Ref. Cable 3.4 Ref. [.132] 2.1 .1 Ref.Ref. [.081] 81] 4.9 Dia. [.192] Min. 4.4 4.4 2.5 [.172] [.172] [.100] Min.Min. Dia. Ref. SSMT Right t Re Recommended 2.4 Max. Panel Angle Jack k Mo Mounting Hole [.093] Thickness 7.9 Hex. [.312] Note: Part Numbers are RoHS compliant except:
Indicates non-RoHS compliant. 216 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SSMT Surface Mount Interconnect System (Continued) Inter-Series Cable Assemblies (Continued) MCX Bulkhead Jack Length A Reference Plane to Centerline 1.3 16.8 Ref. [.052] [.662] Dia. Ref. Cable 4.8 Dia. [.189] 6.4 [.250] Max. Panel Thickness 11.4 [.447] 3.4 Ref. [.132] 4.9 Dia. [.192] Min. 2.1 1 Ref. Ref. [.081]1] Assembly Length (A) 100 [4.0] 200 [8.0] 305 [12.0] Part No. 1064549-1 1064558-1 1064566-1 Assembly Length (A) 100 [4.0] 200 [8.0] 305 [12.0] Part No. 1064550-1 1064559-1 1064567-1 2.5 Dia. Ref. 4.5 Min. [.100] [.177] SSMT Right Recom Recommended Angle Jack Mounti Mounting Hole 6.4 [.250] Hex. MCX Right-Angle Plug Length A Centerline to Centerline 3.4 Ref. [.132] 1.3 [.052] Dia. Ref. Cable 2.1 Ref. [.081] 12.7 [.500] Ref. 6.1 [.241] SSMT Right Angle Jack 7.9 [.312] 2.5 Dia. Ref. [.100] 101.6 Ref. [4.00] SSMT Disengagement Tool Part No. 1221286-1 SLIDE HORIZONTAL TO ENGAGE TOOL LIFT VERTICAL TO DISENGAGE CONNECTOR PRESS VERTICAL TO ENGAGE CONNECTOR OPTIONAL Use of Engagement/Disengagement Tool Note: The SSMT disengagement tool can be utilized as an optional engagement tool versus manual hand installation. SSMT to SMA Between Series Adapters SSMT Plug to SMA Jack Adapter SSMT Plug to SMA Plug Adapter 13.7 Ref. [.538] 5.5 Across Flats [.218] SMA Jack SSMT Plug SSMT Plug 16.2 Ref. [.639] SMA Plug SSMT Jack 12.9 Ref. [.508] 10.5 Ref. [.413] Part No. 1055696-1 5.5 Across Flats [.218] SSMT Jack SMA Jack SMA Plug SSMT Jack to SMA Plug SSMT Jack to SMA Jack Adapter Part No. 1055695-1 Part No. 1055694-1 Part No. 1055697-1 Note: Part Numbers are RoHS compliant except:
Indicates non-RoHS compliant. 217 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208