11032560-00

44000 Series Thermistor Components 100 to 1 Meg Ohm Resistance @ 25°C Thermally Conductive Epoxy Coating Interchangeability Pressed Key Characteristic High sensitivity RoHS Compliant 44000 SERIES THERMISTORS Epoxy Encapsulated Precision Interchangeable NTC Thermistors utilizing high stability pressed-disk ceramic sensor for general applications. FEATURES • • • • • • • 100 Ohm Resistance @ 25°C Interchangeable ±0.1°C or ±0.2°C, 0°C to 70°C Good Long Term Stability High Sensitivity Thermally Conductive Epoxy Coating RoHS Compliance 32 AWG, 3” (7.6 cm) Silver Plated 0.095“ (2.4 mm) stability MEAS thermistors are chemically stable and are not significantly affected by aging or exposure to strong nuclear radiation. The table below shows typical stability for a representative thermistor, the MEAS 44005. Typical Thermometric Drift Operating Temperature 10 months 100 months 0°C < 0.01°C < 0.01°C 25°C < 0.01°C < 0.02°C 100°C 0.20°C 0.32°C 150°C 1.5°C Not recommended APPLICATIONS • • • • • Tight Tolerance Instrumentation General Applications Requiring Stability Applications Requiring Sensing Small Changes in Temperature Non-condensing Moisture Environments Allows use in Applications World-wide 44000 Series Thermistor Component Summary www.meas-spec.com 15 November 2008 44000 Series Thermistor Components product definition Maximum working temperature Best storage and working temperature 11.49 100°C -80 + 50°C 3118 15.15 100°C -80 + 50°C 3271 17.33 100°C -80 + 50°C 2252 3891 29.26 150°C -80 + 120°C 3000 3891 29.26 150°C -80 + 120°C 3891 29.26 150°C -80 + 120°C 3574 23.51 150°C -80 + 120°C 3810 29.15 150°C -80 + 120°C 100K 3988 34.82 150°C -80 + 120°C 300K 4276 46.02 150°C -80 + 120°C 44015 1 meg 4582 61.96 150°C -80 + 50°C 44035 1000 3271 17.33 100°C -80 + 75°C 44033 2252 3891 29.26 150°C -80 + 75°C 44030 3000 3891 29.26 150°C -80 + 75°C 44034 5000 3891 29.26 150°C -80 + 75°C 44037 6K 3891 29.26 150°C -80 + 75°C 44036 10K 3891 29.26 150°C -80 + 75°C 44031 10K 3574 23.51 150°C -80 + 75°C 44032 30K 3810 29.15 150°C -80 + 75°C Part Number ±0.2°C Interchangeability Tolerance 0 – 70°C ±0.1°C Interchangeability Tolerance 0 – 70°C 44001A Zero Power Resistance ohm at 25°C 100 Beta 0- 50°C 2854 44002A 300 44003A 1000 44004 44005 44007 5000 44006 10K 44008 30K 44011 44014 Ratio ohm 25/125°C (K) The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to the manufacturer. Measurement Specialties, Inc. reserves the right to make changes without further notice to any product herein. Measurement Specialties, Inc. makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does Measurement Specialties, Inc. assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different applications. All operating parameters must be validated for each customer application by customer’s technical experts. Measurement Specialties, Inc. does not convey any license under its patent rights nor the rights of others. ordering info NORTH AMERICA Measurement Specialties, Inc. 910 Turnpike Road Shrewsbury, MA 01545 Tel: 1-508-842-0516 Fax: 1-508-842-0342 EUROPE Measurement Specialties, Inc. Ballybrit Business Park Galway Ireland Tel: +353-91-753238 Fax: +353-91-770789 ASIA Measurement Specialties (China) Ltd. No. 26 Langshan Road Shenzhen High-Tech Park (North) Nanshan District, Shenzhen 51807 China Tel: +86 (0) 755 33305088 Fax: +86 (0) 755 33305099 Sales email: Sales email: Sales email: temperature.sales.amer@meas-spec.com temperature.sales.emea@meas-spec.com temperature.sales.asia@meas-spec.com 44000 Series Thermistor Component Summary www.meas-spec.com 15 November 2008