1195132-7

CUSTOMER DRAWING MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene flouride. 2. MELTABLE SEALING RINGS: Modified thermoplastic. 3. SEAMLESS STUB SPLICER: Base Metal: Copper Alloy 101 or 102 per ASTM B-75. Plating: Tin per MIL-T-10727, Type 1. Color code: See table below. Dimensions of Stub Splicer: Part Prod. CMA Weight Color Name Rev. Range I.D. O.D. Max. Code D-436-60 A 1058 - 2680 1.75 (0.069) 2.68 (0.106) 1.65 lbs/Mpc Blue 1.63 (0.064) 2.64 (0.101) D-436-61 A 2375 - 6755 2.60 (0.102) 3.89 (0.153) 2.15 lbs/Mpc Yellow 2.46 (0.097) 3.73 (0.147) APPLICATION 1. These parts are designed to provide an immersion resistant stub splice in wires having insulations rated for at least 135C. Wire accommodation: Jacket O.D. – 2.03 (0.080) max WIRE GAUGE CMA NUMBER D-436-60 D-436-61 16 2426 --2 18 1900 --2-3 20 1216 2 2-5 22 754 2-3 3-8 24 475 2-5 4 - 10 26 304 3-8 9 - 10 2. Parts will meet performance requirements of MIL-S-81824/1. 3. Recovered dimensions of Insulation Sleeve: I.D – 3.18 (0.125) max Wall – 0.33 (0.013) min TITLE : Raychem Devices UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCHES DIMENSIONS ARE BETWEEN BRACKETS. Tyco Electronics reserves the right to amend this ANGLES: N/A TOLERANCES: drawing at any time. Users should evaluate the 0.00 N/A suitability of the product for their application. ROUGHNESS IN 0.0 N/A MICRON 0 N/A DRAWN BY: REPLACES: ECO NUMBER: M. FORONDA N/A ECO-18-009289 STUB SPLICE SEALING SYSTEM MULTI-WIRE DOCUMENT NO. D-436-60/-61 DOCUMENT REV: REV DATE: 6-14-2018 PROD. REV. SEE TABLE SCALE: None A1 SIZE: A SHEET: 1 of 1 © 2018 TE Connectivity Corporation. All Rights Reserved. If this document is printed it becomes uncontrolled. Check for the latest revision.