1201-SSA-0016-1

ANT-450-HSW-NP Terminal/Duck Antenna, Dual Band, Cellular / Cat-M/NB-IoT, External Mount, Connector, N-type, Omnidirectional, Single Port, Gain 3 < 6 dBi ANT-450-HSW-NP  ACTIVE TE Internal #: ANT-450-HSW-NP Terminal/Duck Antenna, Dual Band, Cellular / Cat-M/NB-IoT, External Mount, Connector, N-type, Omnidirectional, Single Port, Gain 3 < 6 dBi View on TE.com > Antennas Wireless Application: Cat-M/NB-IoT, Cellular Mounting Location: External Mounting Type: Connector Antenna Termination: N-type Antenna Type: Terminal/Duck Features Product Type Features Antenna Termination N-type Configuration Features Mounting Location External Antenna Type Terminal/Duck Band Type Dual Band Port Configuration Single Port Signal Characteristics Nominal Frequency Range 410 – 470 Peak Gain 3 < 6 dBi Mechanical Attachment Mounting Type Connector Operation/Application Directionality Omnidirectional Industry Standards  Wireless Application Cat-M/NB-IoT, Cellular Primary Application Cat-M/NB-IoT, Cellular Product Compliance For support call+1 800 522 6752 01/02/2024 11:45PM | Page 1 ANT-450-HSW-NP Terminal/Duck Antenna, Dual Band, Cellular / Cat-M/NB-IoT, External Mount, Connector, N-type, Omnidirectional, Single Port, Gain 3 < 6 dBi Product Compliance For compliance documentation, visit the product page on TE.com> EU RoHS Directive 2011/65/EU Compliant with Exemptions EU ELV Directive 2000/53/EC Not Yet Reviewed China RoHS 2 Directive MIIT Order No 32, 2016 Restricted Materials Above Threshold EU REACH Regulation (EC) No. 1907/2006 Current ECHA Candidate List: JUNE 2023 (235) Not Yet Reviewed Halogen Content Not Yet Reviewed for halogen content Solder Process Capability Not reviewed for solder process capability Product Compliance Disclaimer This information is provided based on reasonable inquiry of our suppliers and represents our current actual knowledge based on the information they provided. This information is subject to change. The part numbers that TE has identified as EU RoHS compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, mercury, PBB, PBDE, DBP, BBP, DEHP, DIBP, and 0.01% for cadmium, or qualify for an exemption to these limits as defined in the Annexes of Directive 2011/65/EU (RoHS2). Finished electrical and electronic equipment products will be CE marked as required by Directive 2011/65/EU. Components may not be CE marked.Additionally, the part numbers that TE has identified as EU ELV compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, and mercury, and 0.01% for cadmium, or qualify for an exemption to these limits as defined in the Annexes of Directive 2000/53/EC (ELV). Regarding the REACH Regulations, TE’s information on SVHC in articles for this part number is still based on the European Chemical Agency (ECHA) ‘Guidance on requirements for substances in articles’(Version: 2, April 2011), applying the 0.1% weight on weight concentration threshold at the finished product level. TE is aware of the European Court of Justice ruling of September 10th, 2015 also known as O5A (Once An Article Always An Article) stating that, in case of ‘complex object’, the threshold for a SVHC must be applied to both the product as a whole and simultaneously to each of the articles forming part of its composition. TE has evaluated this ruling based on the new ECHA “Guidance on requirements for substances in articles” (June 2017, version 4.0) and will be updating its statements accordingly. Compatible Parts  TE Part # CONN001-W TE Part # CONN002-W TE Part # CONN003-W TE Part # CONN007-1-W N Type Jack 50 Ohm PCB Through Hole N Type Jack 50 Ohm Panel Mount N Type Jack 50 Ohm Panel Mount N Type Plug 50 Ohm Cable Crimp For support call+1 800 522 6752 01/02/2024 11:45PM | Page 2 ANT-450-HSW-NP Terminal/Duck Antenna, Dual Band, Cellular / Cat-M/NB-IoT, External Mount, Connector, N-type, Omnidirectional, Single Port, Gain 3 < 6 dBi TE Part # CONN007-2-W TE Part # CONN007-3-W TE Part # CONN007-4-W TE Part # CONN008-W N Type Plug 50 Ohm Cable Crimp N Type Plug 50 Ohm Cable Crimp N Type Plug 50 Ohm Cable Crimp N Type Plug 50 Ohm Panel Mount Crimp Customers Also Bought TE Part #DT04-2P-L012 TE Part #T4111002051-000 TE Part #T4171010005-001 TE Part #HDP26-24-31SE DEUTSCH DT Receptacle Connectors M12 Field Installable Unshielded M12,REAR MOUNTING,MALE,A,5P,0.2 M WIRE PLG, 31P, BLK, E, 16, S TE Part #DT4P-L012-GKT TE Part #001-0002-L TE Part #ADP-NF-NF-B-W TE Part #ANT-5GW-IPW2-NP GASKET, 4P, BLK, DT/DTM ANTENNA,900 MHZ, Dipole N Type Jack to N Type Jack Bulkhead Antenna Whip 5G WB Cell IP67 N Plug Documents Product Drawings Antenna HSW 450 IP67 N Jack English Datasheets & Catalog Pages VHETH Antenna Series Ground Plane Optimization English Sub-6 Cellular LTE-5G NR Frequency Band Guide English Considerations for Operation within the 260-470MHz Band English Understanding Antenna Specifications and Operation English Antennas Design, Application and Performance English Antenna Color Codes  English For support call+1 800 522 6752 01/02/2024 11:45PM | Page 3 ANT-450-HSW-NP Terminal/Duck Antenna, Dual Band, Cellular / Cat-M/NB-IoT, External Mount, Connector, N-type, Omnidirectional, Single Port, Gain 3 < 6 dBi English The FCC Road Part 15 From Concept to Approval English RF 101 Information for the RF Challenged English Virtual Antenna English Microsplatch Ground Plane Optimization English 450 MHz Cellular LTE Whip Antennas English  For support call+1 800 522 6752 01/02/2024 11:45PM | Page 4