1201-SSA-0020-1

2MM-HSP-D05-HT-02-H-TB PCB Mount Header, Right Angle, Board-to-Board / Wire-to-Board, 10 Position, 2 mm [.079 in] Centerline, Fully Shrouded, Gold, AMPMODU 2 mm 2MM-HSP-D05-HT-02-H-TB  ACTIVE AMPMODU | AMPMODU 2 mm TE Internal #: 1-2823411-0 PCB Mount Header, Right Angle, Board-to-Board / Wire-to-Board, 10 Position, 2 mm [.079 in] Centerline, Fully Shrouded, Gold, AMPMODU 2 mm View on TE.com > Connectors > PCB Connectors > PCB Headers & Receptacles Connector System: Board-to-Board, Wire-to-Board Number of Positions: 10 Centerline (Pitch): 2 mm [ .079 in ] Sealable: No PCB Mount Orientation: Right Angle Features Product Type Features PCB Connector Assembly Type PCB Mount Header Header Type Fully Shrouded Connector System Board-to-Board, Wire-to-Board Sealable No Connector & Contact Terminates To Printed Circuit Board Configuration Features Number of Positions 10 PCB Mount Orientation Right Angle Number of Rows 2 Electrical Characteristics Insulation Resistance 1000 MΩ Dielectric Withstanding Voltage (Max) 650 V Operating Voltage 250 VAC Body Features  For support call+1 800 522 6752 01/02/2024 08:52AM | Page 1 2MM-HSP-D05-HT-02-H-TB PCB Mount Header, Right Angle, Board-to-Board / Wire-to-Board, 10 Position, 2 mm [.079 in] Centerline, Fully Shrouded, Gold, AMPMODU 2 mm Body Features Connector Profile Standard Primary Product Color Black Contact Features Contact Mating Area Length 4 mm[.157 in] Mating Square Post Dimension .5 mm[.02 in] PCB Contact Termination Area Plating Material Thickness 3 – 5 µm[100 – 200 µin] Contact Layout Inline Contact Type Pin Contact Underplating Material Thickness 1.27 µm Contact Mating Area Plating Material Thickness .76 µm[30 µin] PCB Contact Termination Area Plating Material Finish Matte Contact Shape & Form Square Contact Underplating Material Nickel PCB Contact Termination Area Plating Material Tin Contact Base Material Phosphor Bronze Contact Mating Area Plating Material Gold Contact Current Rating (Max) 2A Termination Features Square Termination Post & Tail Dimension .5 mm[.02 in] Termination Post & Tail Length 2.8 mm[.11 in] Termination Method to Printed Circuit Board Through Hole - Solder Mechanical Attachment Mating Retention With PCB Mount Alignment Without PCB Mount Retention Without Mating Retention Type Center Latch Connector Mounting Type Board Mount Housing Features Housing Material Liquid Crystal Polymer (LCP) Centerline (Pitch) 2 mm[.079 in] Dimensions  Connector Length 12 mm[.472 in] PCB Thickness (Recommended) 1.6 mm[.063 in] For support call+1 800 522 6752 01/02/2024 08:52AM | Page 2 2MM-HSP-D05-HT-02-H-TB PCB Mount Header, Right Angle, Board-to-Board / Wire-to-Board, 10 Position, 2 mm [.079 in] Centerline, Fully Shrouded, Gold, AMPMODU 2 mm PCB Thickness (Recommended) 1.6 mm[.063 in] Row-to-Row Spacing 2 mm[.079 in] Usage Conditions Housing Temperature Rating High Operating Temperature Range -40 – 105 °C[-40 – 221 °F] Operation/Application Solder Process Feature Board Standoff Circuit Application Signal Industry Standards UL Flammability Rating UL 94V-0 Packaging Features Packaging Type Tube Product Compliance For compliance documentation, visit the product page on TE.com> EU RoHS Directive 2011/65/EU Compliant EU ELV Directive 2000/53/EC Compliant China RoHS 2 Directive MIIT Order No 32, 2016 No Restricted Materials Above Threshold EU REACH Regulation (EC) No. 1907/2006 Current ECHA Candidate List: JUNE 2023 (235) Candidate List Declared Against: JUNE 2022 (224) Does not contain REACH SVHC Halogen Content Low Halogen - Br, Cl, F, I < 900 ppm per homogenous material. Also BFR/CFR/PVC Free Solder Process Capability Reflow solder capable to 260°C Product Compliance Disclaimer This information is provided based on reasonable inquiry of our suppliers and represents our current actual knowledge based on the information they provided. This information is subject to change. The part numbers that TE has identified as EU RoHS compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, mercury, PBB, PBDE, DBP, BBP, DEHP, DIBP, and 0.01% for cadmium, or qualify for an exemption to these limits as defined in the Annexes of Directive 2011/65/EU (RoHS2). Finished electrical and electronic equipment products will be CE marked as required by Directive 2011/65/EU. Components may not be CE marked. Additionally, the part numbers that TE has identified as EU ELV compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, and mercury, and 0.01% for cadmium, or qualify for an exemption to these limits as defined in the Annexes of Directive 2000/53/EC (ELV). Regarding the REACH Regulation, the information TE provides on SVHC in articles for this part number is based on the latest European Chemicals Agency (ECHA) ‘Guidance on requirements for substances in articles’ posted at this URL: https://echa.europa.eu/guidance-documents/guidance-onreach  For support call+1 800 522 6752 01/02/2024 08:52AM | Page 3 2MM-HSP-D05-HT-02-H-TB PCB Mount Header, Right Angle, Board-to-Board / Wire-to-Board, 10 Position, 2 mm [.079 in] Centerline, Fully Shrouded, Gold, AMPMODU 2 mm Compatible Parts TE Part # 1-2316110-0 10P,2MM,REC,HSG,DR,CRIMP,LATCH, BOX Also in the Series AMPMODU 2 mm Connector Contacts(27) PCB Headers & Receptacles(10406) Wire-to-Board Connector Assemblies & Housings(202) Customers Also Bought TE Part #3-2176460-9 TE Part #200870-1 TE Part #200868-1 TE Part #2-1393243-1 SMF 7W 43K 5% Taped SERIES"M" JACKSCREW FEMALE ASS SER. "M" JACKSCREW MALE ASSEM. RTE25024 TE Part #86492-6 TE Part #201532-4 TE Part #2301840-1 TE Part #2176405-8 MOD IV RECP PLTD 30 SEL RECEPT BLOCK,104 POSN,M SERIES AMPL REC HD20, VERT, 15P, B/L,4-40 3550 1K0 5% S/LOC  For support call+1 800 522 6752 01/02/2024 08:52AM | Page 4 2MM-HSP-D05-HT-02-H-TB PCB Mount Header, Right Angle, Board-to-Board / Wire-to-Board, 10 Position, 2 mm [.079 in] Centerline, Fully Shrouded, Gold, AMPMODU 2 mm TE Part #1-2176344-3 CRGCQ 1206 100R 5% Documents Product Drawings 10P,2MM,PL HDR,DRRT,2.8,0.76AU,TB English CAD Files 3D PDF 3D Customer View Model ENG_CVM_CVM_1-2823411-0_1.2d_dxf.zip English Customer View Model ENG_CVM_CVM_1-2823411-0_1.3d_igs.zip English Customer View Model ENG_CVM_CVM_1-2823411-0_1.3d_stp.zip English By downloading the CAD file I accept and agree to the Terms and Conditions of use. Datasheets & Catalog Pages AMPMODU 2mm interconnection system QRG English Flyer - AMPMODU 2mm Shrouded Header English Product Specifications Application Specification English Agency Approvals VDE Certificate English  For support call+1 800 522 6752 01/02/2024 08:52AM | Page 5