Solutions for AdvancedTCA,
AdvancedTCA 300, MicroTCA,
and AdvancedMC Standards
Tyco Electronics Corporation
Harrisburg, PA
tycoelectronics.com
3-1773445-8–2.5M–LUG–FP–6-07
RoHS
Ready
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Introduction
Solutions For
AdvancedTCA
Hardware designers,
particularly those working
on blades or chassis, are
currently faced with huge
challenges. The needs of
the communications network infrastructure and next
generation communication
applications are rapidly
changing, and cannot be
served by existing proprietary solutions.
Need more information?
Call Technical Support at the
numbers listed below.
Technical Support is staffed
with specialists well versed in
all Tyco Electronics products.
They can provide you with :
■ Technical Support
■ Catalogs
■ Technical Documents
■ Product Samples
■ Tyco Electronics
Authorized Distributor
Locations
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
Therefore AdvancedTCA
(Advanced Telecommunications Computing
Architecture), MicroTCA
(Micro Telecommunications
Computing Architecture) and
AdvancedMC (Advanced
Mezzanine Card) open
industry standards have
been developed by PICMG
to place a high priority on
cost effectiveness while
attempting to support a
variety of potential future
technologies.
This new standard is
also supported by
Tyco Electronics, which
shows the full range of
AdvancedTCA, MicroTCA
and AdvancedMC compliant
components that can be
offered for the wide area of
applications within telecommunication as well as data
communication.
Why are AdvancedTCA
and MicroTCA Standards
Important?
AdvancedTCA and
MicroTCA provide a means
for the telecommunications
equipment market to take
advantage of standardized,
off-the-shelf hardware
(enabling differentiation
through application-layer
and system-level software
rather than hardware).
• Shorter time to market
• Increased vendor choice
• Increased flexibility
• Multiple switch fabrics
supported
• Radio Network Controllers
(RNC)
• Serving Gateway Support
Node (SGSN)
• Gateway GPRS Support
Node (GGSN)
• Home Location Register
(HLR)
• IP Multimedia Subsystem
(IMS) Servers
• Media and Application
Servers
• Media Gateways and Soft
Switches
Wireline Networking
Equipment
• DSLAMs
• User defined I/O
• Multi-service switches
• Lower cost
(Acquisition CapEx/OpEx)
• Media servers
• Blade servers
Examples of Telecom
& Network Equipment
Manufacturers’ Related
AdvancedTCA and
MicroTCA Applications &
Systems
• VOIP Session Controllers
Fiber Optic Networking
Equipment
Wireless Infrastructure
Equipment
• Base Stations
3G (IMT-2000)
WCDMA
CDMA2000
TD-SCDMA
2
Catalog 3-1773445-8
Revised 6-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Introduction (Continued)
What Is AdvancedTCA?
AdvancedTCA is an open
industry standard, developed by PICMG 3.0, to create a new blade (board)
and chassis (shelf) form
factor, tailored to meet the
needs of the rapidly changing communications network infrastructure, and
next generation communication applications, which
cannot be served by existing proprietary solutions.
This architecture places
high priority on cost effectiveness versus attempting
to support a variety of
potential future technologies.
While the specification is
founded on the requirements of the communications infrastructure, it is
extensible to a variety of
applications and environments where highly available, highly scalable, cost
effective and open architecture modular solutions are
required.
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
The architecture is optimized around connectivity
requirements of signaling
and media gateways, while
also providing headroom for
higher performance computing elements @ a
99.999% availability rate.
AdvancedTCA offers
a scalable backplane
environment that supports:
• A variety of standard
and proprietary fabric
interfaces
• Robust system
management
• Superior power and
cooling capabilities.
Each board in AdvancedTCA
(up to 16 boards a shelf and
3 shelves a rack) may support up to 200 W in a single
slot. The power is supplied
to each board via redundant -48 VDC feeds. Front
and rear cabling practice is
supported for standard 600
mm total depth cabinet
practice, prevalent in
Central Office facilities.
What Is
AdvancedTCA300?
AdvancedTCA300 is an
AdvancedTCA based
equipment platform, but
compliant with the ANSI and
ETSI equipment practices
requiring 300 mm total depth,
front access included.
What Is AdvancedMC?
The AdvancedMC standard,
also developed by PICMG,
defines the base-level
requirements for a widerange of high-speed mezzanine cards, optimized for, but
not limited to, AdvancedTCA
and MicroTCA carrier
blades. AdvancedMC
defines a modular add-on
or “child” card that extends
the functionality of an
AdvancedTCA carrier
board. In an AdvancedTCA
equipment practice, the
AdvancedMC modules lie
parallel to and are integrated
onto the AdvancedTCA
carrier board. The
AdvancedMC cards can
also be equipped in
MicroTCA shelves.
What Is MicroTCA?
MicroTCA is complementary
to AdvancedTCA, but is
optimized for smaller scale
and more price
sensitive applications. The
basic premise of MicroTCA
is to support mezzanine
boards, conform to the
AdvancedMC standard,
and connect to the backplane, eliminating the need
to use an additional carrier
board. Like AdvancedTCA,
the MicroTCA equipment
practice is a modular, open
standards based shelf level
platform. The MicroTCA
standard has not finished
completion yet.
www.tycoelectronics.com/products/atca
3
Catalog 3-1773445-8
Revised 6-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Table of Contents
Introduction to AdvancedTCA, MicroTCA, and AdvancedMC Standards . . . . . . . . . 2, 3
© Copyright 2007, 2006 and 2005 by
Tyco Electronics Corporation.
All International Rights Reserved.
AMP, Austin Lynx, CHIP COOLER,
ELCON, FUTUREBUS+, MINIPAK,
MRJ21, MULTI-BEAM XL, TE Logo,
Tyco Electronics, Z-PACK and
Z-PACK TinMan are trademarks.
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
Infiniband is a trademark of Infiniband
Trade Association.
Other products, logos, and company
names mentioned herein may be
trademarks of their respective owners.
Disclaimer
While Tyco Electronics Corporation
and its affiliates referenced herein
(“Tyco Electronics”) have made every
reasonable effort to ensure the accuracy
of the information in this catalog,
Tyco Electronics does not guarantee that
it is error-free, nor does Tyco Electronics
make any other representation, warranty
or guarantee that the information is
accurate, correct, reliable or current.
Tyco Electronics reserves the right to
make any adjustments to the information
contained herein at any time without
notice. Tyco Electronics expressly disclaims all implied warranties regarding
the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for
a particular purpose. Tyco Electronics’
only obligations are those in the
Tyco Electronics Standard Terms and
Conditions of Sale, and in no case will
Tyco Electronics be responsible for any
incidental, indirect, or consequential
damages arising from the sale, resale,
use, or misuse of its products. Users
should independently evaluate the suitability of, and test each product for, their
application.
The dimensions, specifications, designs,
construction, materials and processes in
this catalog are for reference purposes
only and are subject to change without
notice. Please consult Tyco Electronics
for the most current product information.
The export of certain Tyco Electronics
products is restricted by the Arms Export
Control Act (Title 22, U.S.C. Sec 2751, et
seq.) or the Export Administration Act of
1979, as amended (Title 50, U.S.C., App.
2401 et seq.). Orders may be subject to
export approval by the U.S. Government.
Buyer must comply with all applicable
export laws of all applicable jurisdictions.
See inside back cover for Global
Contacts and phone numbers.
Product Defined in AdvancedTCA/AdvancedTCA 300 Specifications
AdvancedTCA — Zone 1 Power Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5, 6
AdvancedTCA — Zone 2 Z-PACK HM-Zd High Speed Signal Connectors . . . . . . . . . . 7-9
AdvancedTCA — Zone 3 RTM Board Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Co-Planar UPM for AdvancedTCA Zone 3 Power Applications . . . . . . . . . . . . . . . . . . . 11
Z-PACK TinMan Connectors for AdvancedTCA Standards — Zone 3 . . . . . . . . . . . . . . 12
AdvancedTCA — Advanced Mezzanine Card (AdvancedMC) Connectors . . . . . . . . . . 13
MULTI-BEAM XL Connectors for AdvancedTCA 300 Standard . . . . . . . . . . . . . . . . . . . 14
AdvancedTCA — Guide Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Product Defined in MicroTCA Specification
Vertical AdvancedMC Connector for MicroTCA Applications . . . . . . . . . . . . . . . . . . . . . 16
MINIPAK HD Power Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-19
Product Compliant to xTCA or AdvancedMC Specifications
Stacked RJ45 Modular Jacks for AdvancedTCA, AdvancedMC Standards . . . . . . . . . . 20
Low Profile RJ45 Modular Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
AdvancedTCA — Front & Rear I/O Connectors – SFP Modules . . . . . . . . . . . . . . . . . . 22
AdvancedTCA — Front & Rear I/O Connectors — MRJ21 Receptacles . . . . . . . . . . . . 23
AdvancedTCA — Thermal Products & Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Low Profile DDR2 Connector for AdvancedTCA Standards . . . . . . . . . . . . . . . . . . . . . . 24
SO DIMM Connectors for AdvancedMC Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
1.0 mm Free Height (FH) (IEEE 1386) Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
AdvancedTCA — Power Distribution & Management Modules . . . . . . . . . . . . . . . . 27, 28
Part Number Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Web Site Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Global Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Restriction on the use of Hazardous Substances
(RoHS)
At Tyco Electronics, we’re ready to support your RoHS requirements. We’ve assessed more than 1.5 million end items/components for RoHS compliance, and issued new part numbers
where any change was required to eliminate the restricted
|materials. Part numbers in this catalog are identified as:
RoHS Compliant — Part numbers in this catalog are RoHS
Compliant, unless marked otherwise. These products comply
with European Union Directive 2002/95/EC as amended 1
January 2006 that restricts the use of lead, mercury, cadmium,
hexavalent chromium, PBB, and PBDE in certain electrical and
electronic products sold into the EU as of 1 July 2006.
NOTE: For purposes of this Catalog, included within the definition of RoHS Compliant are products that are clearly “Out of
Scope” of the RoHS Directive such as hand tools and other
non-electrical accessories.
5 of 6 Compliant — A “䢇” symbol identifies these part
numbers. These products do not fully comply with the
European Union Directive 2002/95/EC because they contain
lead in solderable interfaces (they do not contain any of the
other five restricted substances above allowable limits).
However, these products may be suitable for use in RoHS
applications where there is an application-based exception for
lead in solders, such as the server, storage, or networking
infrastructure exemption.
NOTE: Information regarding RoHS compliance is provided
based on reasonable inquiry of our suppliers and represents our
current actual knowledge based on the information provided by
our suppliers. This information is subject to change. For latest
compliance status, refer to our website referenced at right.
Getting the Information You Need
Our comprehensive on-line RoHS Customer Support Center
provides a forum to answer your questions and support your
RoHS needs. A RoHS FAQ (Frequently Asked Questions) is
available with links to more detailed information. You can also
submit RoHS questions and receive a response within 24 hours
during a normal work week. The Support Center also provides:
■ Cross-Reference from
Non-compliant to Compliant
Products
■ Ability to browse RoHS
Compliant Products in our
on-line catalog
■ Downloadable Technical Data
Customer Information
Presentation
■ More detailed information
regarding the definitions used above
■ So whatever your questions when it comes to RoHS, we’ve
got the answers at www.tycoelectronics.com/leadfree
RoHS
Customer
Support
Center
4
Catalog 3-1773445-8
Revised 6-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Product Defined in AdvancedTCA/AdvancedTCA 300 Specifications
AdvancedTCA — Zone 1 Power Connectors
Product Defined in AdvancedTCA/
AdvancedTCA 300 Specifications
Tyco Electronics' AdvancedTCA Power Connector is designed to meet or exceed the
PICMG 3.0, R2.0 (AdvancedTCA) specification for Zone 1 connector requirements
including four levels of sequential mating to
provide proper system functionality during
live insertion or extraction of front boards.
Integrated lead-in on the injection molded
housing provides superior blind mate
capability and is fully intermateable with
competing connectors designed to meet the
AdvancedTCA specification for power connectors.
www.tycoelectronics.com/products/atca
www.elconproducts.com
Catalog 1773096 / 1773095
Flyer 2-1773441-7
FEATURES:
• High conductivity, precision
formed contacts
• Selective plating in compliance
with RoHS requirements
• Precision formed compliant
terminations offer excellent retention to provide a reliable
connection
• Qualified to meet PICMG 3.0, R2.0
specification
AdvancedTCA Zone 1
Connector
Front Board Connector
Right Angle Header
Part Number 1766500-1
Backplane Connector
Vertical Receptacle
Part Number 1766501-1
Backplane Connector
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
Daughtercard Connector
Note: Part Numbers are RoHS compliant.
5
Catalog 3-1773445-8
Revised 6-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Product Defined in AdvancedTCA/AdvancedTCA 300 Specifications (Continued)
AdvancedTCA Zone 1
Connector
Product Defined in AdvancedTCA/
AdvancedTCA 300 Specifications
(Continued)
Front Board Connector
Right Angle,
Compliant Press-fit
Material and Finish
Part Number 1766500-1
(tin plated pcb tails)
Part Number 1766500-2䢇
(tin-lead pcb tails)
Right Angle Plug, 22-Position,
Compliant Press-fit
Part Number 1766502-1
(tin plated pcb tails)
Part Number 1766502-2䢇
(tin-lead pcb tails)
Backplane Connector
Straight, Compliant Press-fit,
Part Number 1766501-1
(tin plated pcb tails)
Part Number 1766501-2䢇
(tin-lead pcb tails)
Straight, 22-Position,
Compliant Press-fit
Part Number 1766503-1
(tin plated pcb tails)
Part Number 1766503-2䢇
(tin-lead pcb tails)
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
Insulators — Thermoplastic, glass
reinforced, black, UL94V-0
Signal Pins — Copper alloy
Power Contacts — High conductivity
copper alloy, plated 0.00076 [.000030]
min. gold in mating area
Solder Tails — 0.0030 - 0.0043
[.000120 - .000170] tin plated
46.10
Ref.
[1.815]
See Note 1
41.30
Max.
[1.626]
1
33
30
28
34
31
25 21 17 13
20.90
[.823] Max.
27
32
29
4.60
5.30
[.180] [.207]
26 24 20 16
4
18.65
[.734]
See Note 2
Notes:
1. Mounting Holes (Ø 2.00 [.079] x
5.00 [.197] DP) for use with self
tapping screw (customer supplied).
2. Positions 1–4 not populated and
reserved for future use.
Material and Finish
Insulators — Thermoplastic, glass
reinforced, black, UL94V-0
Signal Pins — Copper alloy
Power Contacts — High conductivity
copper alloy, plated 0.0076 [.000030]
min. gold in mating area
Solder tails — 0.0030 - 0.0043
[.000120 - .000170] tin plated
46.10
Ref.
[1.815]
See Note 2
22.20
[.874]
1
20.90
[.823] Max.
13 17 21
25
28
30
32 33
34
27
16
26
20 24
29
31
4
4.60
[.180]
5.30
[.207]
See Note 1
Notes:
1. Mounting Holes (Ø2.00 [.079] x
5.00 [.197] DP) for use with self
tapping screw (customer supplied).
2. Positions 1–4 not populated and
reserved for future use.
Note: Part Numbers are RoHS compliant except: 䢇 Indicates “5 of 6 compliant” (lead in solderable interface only).
6
Catalog 3-1773445-8
Revised 6-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Product Defined in AdvancedTCA/AdvancedTCA 300 Specifications (Continued)
AdvancedTCA — Zone 2 Z-PACK HM-Zd High Speed Signal Connectors
www.tycoelectronics.com/products/atca
www.hmzd.tycoelectronics.com
Catalog 1773095
Flyer 1308658
Product Defined in AdvancedTCA/
AdvancedTCA 300 Specifications
Z-PACK HM-Zd product from
Tyco Electronics is the high-speed,
Advanced Differential Fabric Connector
system specified by PICMG for use in
AdvancedTCA Zone 2. The coplanar application version using the right angled male
and identical Zone 2 card connector (right
angled female), can be used in Zone 3. In
addition to the four-pair connector modules
specified for use in AdvancedTCA Zone 2,
the product line includes two-pair and threepair signal modules, coplanar connectors,
and high-speed cable assemblies for use in
Zone 3. A mezzanine style connector is also
available in a four-pair version.
FEATURES
• Designed specifically for highspeed differential applications
(3.125 Gb/s to 10+Gb/s)
• A modular connector system with
a standard module size of 25.00
[.984]
• Z-PACK HM-Zd product is an
extension of the Z-PACK 2 mm HM
product line
• Pin header and receptacle have
the exact same footprint to simplify PC board layout
• Optimized footprint supports quad
routing techniques for improved
electrical performance, ease of
trace routing, and significant PCB
manufacturing cost reductions
• Designed to meet Telcordia
requirements
AdvancedTCA Zone 2
Z-PACK HM-Zd High Speed
Signal Connectors
Front Board Connector
4 Pair Right Angle Receptacle
Part Number 6469001-1
Backplane Connector
4 Pair Vertical Header
Part Number 6469002-1
Front Board Connector
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
Backplane Connector
Note: Part Numbers are RoHS compliant.
7
Catalog 3-1773445-8
Revised 6-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Product Defined in AdvancedTCA/AdvancedTCA 300 Specifications (Continued)
Product Defined in AdvancedTCA/
AdvancedTCA 300 Specifications
AdvancedTCA Zone 2
Z-PACK HM-Zd High Speed
Signal Connectors (Continued)
4 Pair Right Angle
Receptacle Assemblies
2.50 Ref.
[.098] Typ.
1.00 ± 0.10
[.039 ± .004]
0.75
Ref.
[.030]
27.90
Ref.
[1.098]
15.67 ± 0.05
[.617 ± .002]
19.35 ± 0.08
[.762 ± .003]
1.50 Ref.
[.059] Typ.
21.35 ± 0.08
[.841 ± .003]
2.20
[.087]
3.00 Ref.
[.118] Typ.
2.00
Ref.
[.079]
Top Surface of
Daughtercard
A
3.68
Ref.
[.145]
1.50 Ref.
[.059] Typ.
8.70 Ref.
[.343]
1.50 Ref.
[.059] Typ.
10.70 ± 0.16
[.421 ± .006]
17.20 ± 0.14
[.677 ± .006]
1
All Plated
Thru Holes
1.50 ± 0.20
[.059 ± .008]
1.50
Typ.
[.059]
2.50
Typ.
[.098]
PCB Hole Dim.
Drilled Hole = 0.7000 ± 0.025 [.02756 ± .0010]
Finished Hole = 0.60 ± 0.05 [.024 ± .002]
Cu Thickness = 0.375 ± 0.0125 [.0148 ± .00049]
SnPb Thickness = 0.007 ± 0.003 [.0003 ± .0001]
1
9 x 2.50 [.098] =
22.50 [.886]
Note: For finishes other than
tin-lead, reference Application
Specification 114-13059.
Recommended PC Board Layout
Daughter Board, Component Side Shown
Part Number
Column
Count
Module
Length
(Dim. A)
6469001-11
10
6469286-1
12
6469294-1
15
6469061-1
20
25.00
.984
30.00
1.181
37.50
1.476
50.00
1.969
1
Application Tooling
Insertion
Repair
Housing
Chiclet
Receptacle
Removal
Removal
Signals
Grounds
80
40
91347-1
1583224-1
1583248-1
96
48
91347-3
1583224-2
1583248-1
120
60
91347-2
1583224-3
1583248-1
160
80
91347-4
1583224-4
1583248-1
AdvancedTCA Zone 2 Daughtercard Connector.
Note: Part Numbers are RoHS compliant.
1
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
8
Catalog 3-1773445-8
Revised 6-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Product Defined in AdvancedTCA/AdvancedTCA 300 Specifications (Continued)
2.50 Ref.
[.098] Typ.
Product Defined in AdvancedTCA/
AdvancedTCA 300 Specifications
AdvancedTCA Zone 2
Z-PACK HM-Zd High Speed
Signal Connectors (Continued)
4 Pair
Vertical Pin Header
Assemblies
2.50
Ref.
[.098]
1.50 Ref.
[.059] Typ.
5.675
Ref.
[.223]
23.43
Max.
[.922]
3.00 Ref.
[.118] Typ.
0.08
19.65 +– 0.20
.003
[.774 +– .008
]
1.50 Ref.
[.059] Typ.
0.75
Ref.
[.030]
A
6.35
[.250]
Ref.
2.95 ± 0.05
[.116 ± .002]
13.40 ± 0.08
[.528 ± .003]
9 x 2.50 [.098] =
22.50 [.886]
2.50
Typ.
[.098]
1.50
Typ.
[.059]
1
All Plated
Thru Holes
Recommended PC Board Layout
Backplane Component Side Shown
Part
Number
Tail
Length
Mating
Pin
Length
Column
Count
Module
Length
(Dim. A)
6469002-11
2.50
.098
2.50
.098
1.80
.071
2.50
.098
2.50
.098
2.50
.098
1.80
.071
5.30
.209
5.30
.209
5.30
.209
5.30
.209
5.30
.209
5.30
.209
5.30
.209
10
25.00
.984
25.00
.984
25.00
.984
30.00
1.181
37.50
1.476
50.00
1.969
50.00
1.969
1
6469046-12
2
6469074-1
6469287-1
6469296-1
6469062-1
6469099-1
10
10
12
15
20
20
Signals
Grounds
1
PCB Hole Dim.
Drilled Hole = 0.7000 ± 0.025 [.02756 ± .0010]
Finished Hole = 0.60 ± 0.05 [.024 ± .002]
Cu Thickness = 0.375 ± 0.0125 [.0148 ± .00049]
SnPb Thickness = 0.007 ± 0.003 [.0003 ± .0001]
Note: For finishes other than
tin-lead, reference Application
Specification 114-13059.
Insertion
Pin
Header
Application Tooling
Repair
Pin
Housing
Removal
Removal
Pin
Insertion
80
40
91349-1
1583237-1
1583220-1
1583255-1
80
40
91349-1
1583237-1
1583220-1
1583255-1
80
40
91349-1
1583237-1
1583220-1
1583255-1
96
48
91349-3
1583237-1
1583220-1
1583255-1
120
60
91349-2
1583237-1
1583220-1
1583255-1
160
80
91349-4
1583237-1
1583220-1
1583255-1
160
80
91349-4
1583237-1
1583220-1
1583255-1
AdvancedTCA Zone 2 Backplane Connector.
Shallow Wall for Daughtercards thicker than 3.50 [.138].
Note: Part Numbers are RoHS compliant.
1
2
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
9
Catalog 3-1773445-8
Revised 6-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Product Defined in AdvancedTCA/AdvancedTCA 300 Specifications (Continued)
Product Defined in AdvancedTCA/
AdvancedTCA 300 Specifications
Z-PACK HM-Zd RTM Board Connector for AdvancedTCA Zone 3 Standard
AdvancedTCA Zone 3
Z-PACK HM-Zd
High Speed, Co-Planar
RTM Board Connector
4 Pair Right Angle Header
Part Number 6469048-1
Part Number 6469375-1
Front Board Connector
4 Pair Right Angle
Receptacle
Part Number 6469001-1
(see page 8)
4 Pair Right Angle
Pin Header Assemblies
2.50 Ref.
[.098] Typ.
34.55
Ref.
[1.360]
1.65
Typ.
[.065]
17.68
[.696]
Ref.
17.32
[.682]
Ref.
19.65
Ref.
[.774]
1.50 Ref.
[.059] Typ.
23.35
Ref.
[.919]
2.20
[.087]
Ref.
3.00 Ref.
[.118] Typ.
Top Surface of
Daughtercard
A
2.00
Ref.
[.079]
5.30
[.209]
Ref.
6.35
Ref.
[.250]
1
All Plated
Thru Holes
1.50 Ref.
[.059] Typ.
1.50 Ref.
[.059] Typ.
10.45
Ref.
[.411]
6.90
Ref.
[.272]
5.675
Ref.
[.223]
17.20
Ref.
[.677]
1.50 ± 0.20
[.059 ± .008]
1.50
Typ.
[.059]
2.50
Typ.
[.098]
9 x 2.50 [.098] =
22.50 [.886]
Part
Number
Tail
Length
Mating
Pin
Length
Column
Count
Module
Length
(Dim. A)
6469048-1
2.20
.087
2.20
.087
5.30
.209
5.30
.209
10
25.00
.984
30.00
1.181
6469375-1
1
12
PCB Hole Dim.
Drilled Hole = 0.7000 ± 0.025 [.02756 ± .0010]
Finished Hole = 0.60 ± 0.05 [.024 ± .002]
Cu Thickness = 0.375 ± 0.0125 [.0148 ± .00049]
SnPb Thickness = 0.007 ± 0.003 [.0003 ± .0001]
Note: For finishes other than
tin-lead, reference Application
Specification 114-13059.
Recommended PC Board Layout
Component Side Shown
1
1
Application Tooling
Repair
Housing
Chiclet
Removal
Removal
Signals
Grounds
Insertion
Pin
Header
80
40
91378-1
1804174-1
1804177-1
96
48
91378-3
1804174-1
1804177-1
Note: Part Numbers are RoHS compliant.
AdvancedMC, AdvancedTCA, AdvancedTCA 300, MicroTCA and PICMG are trademarks
of PICMG-PCI Industrial Computer Manufacturers Group Incorporated.
10
Catalog 3-1773445-8
Revised 6-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Product Defined in AdvancedTCA/AdvancedTCA 300 Specifications (Continued)
Co-Planar UPM for AdvancedTCA Zone 3 Power Applications
Product Defined in AdvancedTCA/
AdvancedTCA 300 Specifications
The Co-Planar Universal Power Module
(UPM) is specifically designed to meet the
need of connecting two printed circuit
boards on the same plane. The UPM connector features hot-pluggable, 16 Amp
power industry proven contacts and have
three sequencing levels.
FEATURES
• Hot-Pluggable contact design
• 16 Amp per contact (on 4-position)
• 250 cycle durability
• Touch-safe receptacle
Right Angle Receptacle
No. of
Circuit
Positions
3
4
5
6
7
8
9
Right-Angle
High Power 16 Amps/
Contact Part Numbers
120943-1
120943-2
120943-3
120943-4
120943-5
120943-6
120943-7
Right Angle Plug
Number of
Positions
Dimension
L
3
12.00
.472
4
15.00
.591
5
18.00
.709
6
21.00
.827
7
24.00
.945
8
27.00
1.063
High Power 16 Amps/
Contact Sequence* Pattern
M,M,M
M,L,M
**
L,L,L,L
L,M,S,S
**
L,L,L,L,L
M,M,L,M,M
**
L,L,L,L,L,L
L,M,S,S,S,S
**
L,L,L,L,L,L,L
L,S,S,L,S,S,L
L,L,L,L,L,L,L,L
L,M,S,S,S,S,S,S
Part Number
5-5223961-1
5-5223963-1
**
120954-1
120954-2
**
120955-1
120955-2
**
120956-1
120956-2
**
120957-1
120957-2
120958-1
120958-2
*Sequencing Reads left-to-right along mating face.
L (long) = 10.90 [.429], M (medium) = 9.30 [.366], S [short] = 7.68 [.302]
**Other sequence patterns available. See on-line customer drawing.
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
Note: Part Numbers are RoHS compliant.
11
Catalog 3-1773445-8
Revised 6-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Product Defined in AdvancedTCA/AdvancedTCA 300 Specifications (Continued)
Product Defined in AdvancedTCA/
AdvancedTCA 300 Specifications
Z-PACK TinMan Connectors for AdvancedTCA Standards — Zone 3
Tyco Electronics Z-PACK TinMan product is
a new high speed, 100-Ohm Impedance
matched connector with extreme signal
density. This connector can be pinned out
for lower speed signal ended lines and exists
in 3, 4, and 5 pair per column versions.
FEATURES:
• High speed: +10 Gbps
• High Density: 25 pair/cm [66
pairs/in]
• 3, 4, and 5 pair per column
versions (5 pair shown)
• Available with or without end walls
for pin protection
• Designed to
requirements
meet
Telcordia
Z-PACK TinMan Receptacles
No. of Pairs
Columns
Part Number
8
1934226-1
16
1934229-1
8
1934222-1
16
1934225-1
8
1934218-1
16
1934221-1
3
4
5
15.35 ± 0.05
[.604 ± .002]
Dimensions
Length
Width
31.81
15.35
1.25
.604
31.81
30.55
1.25
1.203
31.81
15.35
1.25
.604
31.81
30.55
1.25
1.203
31.81
15.35
1.25
.604
31.81
30.55
1.25
1.203
31.81 ± 0.05
[1.252 ± .002]
Z-PACK TinMan Headers
No. of Pairs
Columns
Part Number
1469974-1
8
1469977-1
3
1934034-1
16
1934037-1
1469793-1
8
1469795-1
4
1934026-1
16
1934029-1
1469735-1
8
1469737-1
5
1934018-1
16
1934021-1
Dimensions
Length
Width
31.81
15.35
1.25
.604
31.81
18.05
1.25
.710
31.81
30.55
1.25
1.203
31.81
33.25
1.25
1.31
31.81
15.35
1.25
.604
31.81
18.05
1.25
.710
31.81
30.55
1.25
1.203
31.81
33.25
1.25
1.31
31.81
15.35
1.25
.604
31.81
18.05
1.25
.710
31.81
30.55
1.25
1.203
31.81
33.25
1.25
1.31
End
Walls
N
Y
N
Y
N
Y
N
Y
N
Y
N
AdvancedMC, AdvancedTCA, AdvancedTCA 300, MicroTCA and PICMG are trademarks
of PICMG-PCI Industrial Computer Manufacturers Group Incorporated.
Y
Note: Part Numbers are RoHS compliant.
12
Catalog 3-1773445-8
Revised 6-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Product Defined in AdvancedTCA/AdvancedTCA 300 Specifications (Continued)
AdvancedTCA — Advanced Mezzanine Card (AdvancedMC) Connectors
Product Defined in AdvancedTCA/
AdvancedTCA 300 Specifications
Tyco Electronics is developing an
AdvancedMC connector designed to meet
the PICMG AdvancedMC specification for
use with AdvancedTCA carrier boards and
other related applications. The AdvancedMC
product family from Tyco Electronics will
include single-part Z-Pluggable connectors
in Extended (B+ and A+B+) styles.
www.tycoelectronics.com/products/atca
Product Specification
108-2277
Application Specification
114-13181
AdvancedMC Connector, Style B+
Part Number 1367703-X
FEATURES
71.50 ± 0.05
[2.815 ± .002]
• B+ style available now
• A+B+ styles planned
– Targeted for high-speed differential applications (3.125 Gb/s
to 10+ Gb/s):
– Precision formed compliant pin
reduces stub effect and offers
excellent retention to provide a
reliable connect
65.15 ± 0.05
[2.565 ± .002]
3.90 ± 0.05
[.154 ± .002]
Contact
4.10 ± 0.05
[.161 ± .002]
6.00
2 Plcs.
[.236]
4.10 ± 0.05
[.161 ± .002]
0.00
0.65 +– 0.10
71.50 ± 0.05
[2.815 ± .002]
+ .000
[.026 – .004 ]
65.15 ± 0.05
[2.565 ± .002]
3.90 ± 0.05
[.154 ± .002]
13.70
[.539]
Max.
4.10 ± 0.05
[.161 ± .002]
Housing
1.90 ± 0.08
[.075 ± .003]
Part Number
1367703-1䢇
1367703-2䢇
1-1367703-1䢇
1-1367703-2䢇
2-1367703-1䢇
2-1367703-2䢇
3-1367703-1䢇
3-1367703-2䢇
13.70
[.539]
Max.
21.85 ± 0.05
[.860 ± .002]
Insert, Threaded,
2 Plcs., Optional
Optional
Pegs
]
Housing
1.90 ± 0.08
[.075 ± .003]
• Suitable for assembly processes
using flat-rock tooling
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
+0.0
–01
. 0
+.0
–.4
0
650.
026[.
21.85 ± 0.05
[.860 ± .002]
Insert, Threaded,
2 Plcs., Optional
Plating
SnPb
Sn
SnPb
Sn
SnPb
Sn
SnPb
Sn
Contact
Inserts
No
No
Yes
Yes
No
No
Yes
Yes
6.00
[.236]
2 Plcs.
5.80
[.228]
2 Plcs.
14.00
[.551]
Ref.
Pegs
No
No
No
No
Yes
Yes
Yes
Yes
Note: Part Numbers are RoHS compliant except: 䢇 Indicates “5 of 6 compliant”
(lead in solderable interface only).
13
Catalog 3-1773445-8
Revised 6-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Product Defined in AdvancedTCA/AdvancedTCA 300 Specifications (Continued)
Product Defined in AdvancedTCA/
AdvancedTCA 300 Specifications
MULTI-BEAM XL Connectors for AdvancedTCA 300 Standard
MULTI-BEAM XL product has recently been
specified as the Power Entry Module (PEM)
connector for use in AdvancedTCA 300
applications. This new MULTI-BEAM XL
connector is a blind-mateable board-to-board
power distribution connection system that
is designed to meet the AdvancedTCA 300
specification. This new addition to the
Tyco Electronics MULTI-BEAM XL product
line is selectively loaded and available with
press-fit or solder tail termination styles.
FEATURES:
• Meets the AdvancedTCA 300
Specification
• 55 Amp Single Power Contact,
4 Amp Single Signal Contact
• Solder or Press-Fit termination to
PCB
• Specially sequenced for the
AdvancedTCA Specification
PEM Connector
• Custom configurable modular
design
79.76 ± 0.25
[3.140 ± .010]
Right Angle Receptacle
11.38
[.448]
For use on PEM
Part Number 1888765-1
(Press-Fit Version)
Vertical Plug
For use on backplane
Part Number 1888766-1
(Press-Fit Version)
Backplane Connectors
14.58
[.574]
79.76 ± 0.25
[3.140 ± .010]
12.70
Ref.
[.500]
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
Note: Part Numbers are RoHS compliant.
14
Catalog 3-1773445-8
Revised 6-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Product Defined in AdvancedTCA/AdvancedTCA 300 Specifications (Continued)
AdvancedTCA — Guide Modules
Product Defined in AdvancedTCA/
AdvancedTCA 300 Specifications
Tyco Electronics AdvancedTCA Guide
Modules are available in various sizes and
configurations and are suitable for use in
a wide variety of applications including front
board, mid plane, backplane, and a Rear
Transition Module as specified in the
AdvancedTCA specification. The guide
hardware features improved locating
features to confirm guidance is maintained
across all component tolerances while the
dual-keyed pin configuration allows for
many different keying possibilities.
FEATURES:
• Configurations for front board and
backplane as well as midplane and
coplanar applications in the RTM
• Vertical and right angle pins to
support right angle and coplanar
board configurations
• Guide pins are available in short or
long lengths to accommodate various Tyco Electronics connectors
www.tycoelectronics.com/products/atca
Catalog 1773095
AdvancedTCA Guide/
Keying Modules
The AdvancedTCA Guide
Modules can be used in a
wide variety of applications.
For motherboard-todaughtercard applications
the vertical pin and right
angle socket are used.
This popular configuration is
further supported by our
wide offering of available
keying positions. Each of
the two keyed guide pins
and guide sockets per module can be produced
in a variety of different key
positions. For co-planar
applications, the right angle
guide pins are used along
with the right angle guide
sockets. Both vertical and
right angle guide pins are
available in short or long
sizes, to accommodate
being used with different
Tyco Electronics connectors.
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
rA1
A2 (RTM)
K1/K2
rK1
A1
A2
AdvancedTCA
Name
AdvancedTCA
Location
Description
rA1
Backplane
rA1
Backplane
rA1
Backplane
A2 (RTM)
K1/K2
K1/K2
rK1
A1
A2
Rear Transition Module
Front Board
Front Board
Rear Transition
Backplane
Mid-Plane
Rear Alignment Post
3.00 – 4.00 [.118 – .157] PCB Thickness
Rear Alignment Post
4.10 – 6.00 [.161 – .236] PCB Thickness
Rear Alignment Post
6.10 – 8.00 [.240 – .315] PCB Thickness
Right Angle Male, Keyed
Right Angle Female, Keyed
Right Angle Female, Unkeyed Dummy
Right Angle Female
Vertical Male, Keyed, Short
Vertical Male, Keyed, Long
Part Number
1469269-2
1469269-4
1469269-6
1-1469372-1
1-1469373-1
9-1469373-9
1469374-1
1-1469387-1
1-1469388-1
Note: Part Numbers are RoHS compliant.
15
Catalog 3-1773445-8
Revised 6-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Product Defined in MicroTCA Specification
Vertical AdvancedMC Connector for MicroTCA Applications
FEATURES
• Press-fit connector per
MicroTCA.0 Specification
• 170 lines
• Connector designed so that
custom load patterns are easily
created
• Single overmolded wafer design
• Fully validated electrical models
available
Product Defined in
MicroTCA Specification
Part Number 1469820-X
Part
Number
1469820-1
1469820-2
1469820-3 䢇
1469820-4 䢇
Product Specification
108-2254
Application Specification
114-13180
Tail
Plating
Tin
Tin
Tin-Lead
Tin-Lead
Alignment
Post
No
Yes
No
Yes
Optional Holes
Used with
Part Number
1469944-2
BSC
CL of
Card Slot
Position No. 1
2.40 ± 0.10
2 Plcs.
[.094 ± .004]
Position No. 170
Position No. 1
0.55 ± 0.05
[.022 ± .002]
Typ.
After Plating
1.50
[.059]
31.22
[1.229]
CL of
Card Slot
72.00 ± 0.20
[2.835 ± .008]
69.30
[2.728]
58.50
[2.303]
BSC
2.25
[.089]
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
Note: Part Numbers are RoHS
compliant except: 䢇 Indicates
“5 of 6 compliant” (lead in
solderable interface only).
4.175
[.1644]
0.20
[.008]
Optional
Alignment Post
7.40 ± 0.10
[.291 ± .004]
12.30 ± 0.10
[.484 ± .004]
Center Column
of Holes Are
Ground Positions
5.80 ± 0.10
[.228 ± .004]
Measured to Bottom
of Card Slot
1.50
[.059]
1.35
[.053]
6.00
[.236]
Recommended Mounting Holes
16
Catalog 3-1773445-8
Revised 6-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Product Defined in MicroTCA Specification (Continued)
MINIPAK HD Power Connectors
The MINIPAK HD Connector is a 2-piece
board-to-board connector designed to meet
the PICMG MicroTCA specification. The
connector consists of 24 power contacts
and 72 high density signal contacts.
Application
Designed for a broad range of applications
in Telecom Edge and customer premise
equipment, CATV hardware, wireless base
stations and other communication equipment manufactured to the MicroTCA
(PICMG AdvancedMC 1.0) specification.
Rugged contact design and post-plated 30
micro-inch gold plating provides long-term
reliability in demanding environments.
FEATURES:
Electrical Characteristics
Environmental Characteristics
Maximum Continuous Operating
Temperature — 100°C
Durability Rating — 250 cycles
• 24 power contacts capable of
carrying 14.5 Amps per contact
when fully energized
Product Defined in
MicroTCA Specification
Current Ratings — tested in
accordance with IEC 60512-5-2
Test 5a requirements:
Signal Contacts — .625 ampere each
Power Contacts —
11.625 ampere each (PICMG MicroTCA
R1.0 requirement)
14.5 ampere each (Tyco Electronics
MINIPAK HD performance)
Dielectric Withstanding Voltage —
80 volts rms between differential pair
conductors, general purpose conductors,
and power conductors
• High Current Density
• Industry proven UPM power
contacts
• Hot Plug contact design controls
arc during hot mate/un-mate
cycles
• 3 Mating Levels:
1st — Power/Ground,
2nd — Power/Signal,
3rd — Short/Enable Signal
• Tin Plated (fully RoHS compliant)
or tin-lead (5 of 6 RoHS compliant) pcb tails
Technical Documents
Tyco Electronics Product
Specification — 108-2253
PICMG Specification —
PICMG MicroTCA Standard
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
17
Catalog 3-1773445-8
Revised 6-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Product Defined in MicroTCA Specification (Continued)
MINIPAK HD Power
Connectors (Continued)
Vertical Receptacle
Part Number 1469920-1䢇
(tin-lead pcb tails)
23.30 ± 0.10
[.917 ± .004]
Ø 3.98 ± 0.08
[.157 ± .003]
11.50
[.452]
Part Number 1469920-2
(tin plated pcb tails)
Position 13
The vertical connector
consists of 72 2 mm pin
and 24 UPM receptacle
contacts. The contacts
have compliant pin tails for
press-fit applications.
Position 1
39.30 ± 0.10
[1.547 ± .004]
56.20
[2.213]
Ref.
22.00
[.866]
Ref.
5.50
Ref.
[.217]
Product Defined in
MicroTCA Specification
13.50
[.531]
Ref.
2.00
[.079]
Sense Pin Location (1A)
Ø 3.98 ± 0.08
[.157 ± .003]
9.50 Ref.
[.374]
0.50 Ref.
[.020] 72 Plcs.
2.00
[.079]
0.40 Ref.
[.015] 72 Plcs.
20.62
[.812]
2 Plcs.
2.57
[.101]
11.12 Ref.
[.438]
1.00
x 45°
[.039]
Typ. Chamfer
5.50
Ref.
[.217]
To Centerline of Cavity
17.00 ± 0.20
[.670 ± .008]
2 Plcs.
4.75 Ref.
[.187]
0.75 ± 0.05
[.030 ± .002]
7.81
Ref.
[.307]
61.10 ± 0.20
[2.406 ± .008]
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
Note: Part Numbers are RoHS compliant except: 䢇 Indicates “5 of 6 compliant” (lead in solderable interface only).
18
Catalog 3-1773445-8
Revised 6-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Product Defined in MicroTCA Specification (Continued)
MINIPAK HD Power
Connectors (Continued)
Position 1
23.60
Ref.
[.929]
Position 13
39.60 ± 0.10
[1.559 ± .004]
Right Angle Plug
1.50 Ref.
[.060]
Part Number 1469921-1
(solder tail)
Part Number 1469922-1
Ground
Contacts
Positions
P4 Thru P11
0.40 Ref.
[.016] Typ.
22.12 ± 0.15
[.871 ± .006]
35.50 Ref.
[1.398]
Part Number 1469922-2䢇
Sense Pin
Location
(1A)
20.20 ± 0.10
[.795 ± .004]
Top Surface
of PCB Aligned With
Row B Contact CL
19.00 Ref.
[.748]
10.90 ± 0.13
[.429 ± .005]
9.30 ± 0.13
[.366 ± .005]
12.00 ± 0.10
[.472 ± .004]
17.40 ± 0.10
[.685 ± .004]
18.62
Ref.
[.733]
Reference Back Plane Surface
3.37
Ref.
[.133]
11.50
Ref.
[.453]
Section A - A
11.85 ± 0.10
[.467 ± .004]
Product Defined in
MicroTCA Specification
The right angle connector
consists of 72 high density
signal pins and 24 right
angle UPM blades in a 2 x
12 configuration. There are
8 power blades that are
longer for first mate/break
last ground sequencing.
The right angle connectors
come in 2 piece tail variations, press-fit and solder.
2.55 ± 0.20
[.100 ± .008]
3.00 Ref.
[.118]
(press-fit)
(press-fit, tin-lead pcb tails)
20.70 Ref.
[.815]
32.35
Ref.
29.50 Ref. [1.274]
[1.161]
15.15
[.600]
Ref. Dim.
To Signal
Column A
Part Number 1469921-1
19.12 ± 0.10
[.753 ± .004]
Position 1
23.60
Ref.
[.929]
Position 13
39.60 ± 0.10
[1.559 ± .004]
1.50 Ref.
[.060]
Ground
Contacts
Positions
P4 Thru P11
0.40 Ref.
[.016] Typ.
20.70 Ref.
[.815]
3.30 ± 0.20
[.130 ± .008]
3.00
Ref.
[.118]
22.12 ± 0.15
[.871 ± .006]
35.50 Ref.
[1.398]
Sense Pin
Location
(1A)
20.20 ± 0.10
[.795 ± .004]
Top Surface
of PCB Aligned With
Row B Contact CL
Note: Part Numbers are RoHS
compliant except: 䢇 Indicates
“5 of 6 compliant” (lead in
solderable interface only).
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
Catalog 3-1773445-8
Revised 6-07
www.tycoelectronics.com
19.00 Ref.
[.748]
10.90 ± 0.13
[.429 ± .005]
9.30 ± 0.13
[.366 ± .005]
12.00 ± 0.10
[.472 ± .004]
17.40 ± 0.10
[.685 ± .004]
18.62
Ref.
[.733]
Reference Back Plane Surface
3.37
Ref.
[.133]
11.50
Ref.
[.453]
Section A - A
11.85 ± 0.10
[.467 ± .004]
32.35
Ref.
29.50 Ref. [1.274]
[1.161]
15.15
[.600]
Ref. Dim.
To Signal
Column A
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Part Number 1469922-1
19.12 ± 0.10
[.753 ± .004]
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
19
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Product Compliant to xTCA or AdvancedMC Specifications
Stacked RJ45 Modular Jacks for AdvancedTCA, AdvancedMC Standards
Tyco Electronics has released new stacked
RJ45 modular jacks designed to meet both
AdvancedTCA and AdvancedMC standards.
The offset has been designed to fit the
faceplate and board layout in AdvancedTCA
and full-size AdvancedMC modules, while
providing the port density of the stacked
configuration. These jacks are shielded
and include panel ground springs for EMI
containment. They are available in 2x1,
2x4, 2x6, and 2x8 configurations, with and
without LEDs, and are designed for GigE
performance.
www.tycoelectronics.com/products/atca
Catalog 82066
FEATURES
• Offset designed to meet both
AdvancedTCA and AdvancedMC
standards
• Category 5 Performance
• Available in 2x1, 2x4, 2x6, and 2x8
configurations
• Press-fit termination to the board
Product Compliant to xTCA
or AdvancedMC Specifications
• Available with various LED options
Part Number
(3.27 mm Offset)
Configuration
1888652-1
1888652-2
1888653-1
1888653-2
1888653-3
1888653-4
1888506-1
1888506-2
1888507-1
1888507-2
1888507-3
1888507-4
1888508-1
1888508-2
1888509-1
1888509-2
1888509-3
1888509-4
1888654-1
1888654-2
1888654-3
1888654-4
1888655-1
1888655-2
1888655-3
1888655-4
1888655-5
2x1
2x1
2x1
2x1
2x1
2x1
2x4
2x4
2x4
2x4
2x4
2x4
2x6
2x6
2x6
2x6
2x6
2x6
2x8
2x8
2x8
2x8
2x8
2x8
2x8
2x8
2x8
LED #1
(Lower Port
Left Side)
None
None
Green
Green
Yellow
Green
None
None
Green
Green
Green
Green/Yellow
None
None
Green
Green
Green
Green/Yellow
None
None
None
None
Green
Green
Green
Green
Green
LED #2
(Upper Port
Left Side)
None
None
Green
Green
Yellow
Green
None
None
Green
Green
Green
Green/Yellow
None
None
Green
Green
Green
Green/Yellow
None
None
None
None
Green
Green
Green
Green
Green
LED #3
(Upper Port
Right Side)
None
None
Green
Green
Green
Yellow
None
None
Green
Green
Yellow
Green/Yellow
None
None
Green
Green
Yellow
Green/Yellow
None
None
None
None
Green
Green
Green
Green
Yellow
LED #4
(Lower Port
Right Side)
None
None
Green
Green
Green
Yellow
None
None
Green
Green
Yellow
Green/Yellow
None
None
Green
Green
Yellow
Green/Yellow
None
None
None
None
Green
Green
Green
Green
Yellow
Ground
Clips
Shield Side
Ground Pins
No
Yes
No
Yes
Yes
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
No
Yes
Yes
No
No
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
No
No
Yes
Yes
No
Yes
Note: Part Numbers are RoHS compliant.
AdvancedMC, AdvancedTCA, AdvancedTCA 300, MicroTCA and PICMG are trademarks
of PICMG-PCI Industrial Computer Manufacturers Group Incorporated.
20
Catalog 3-1773445-8
Revised 6-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Product Compliant to xTCA or AdvancedMC Specifications (Continued)
Low Profile RJ45 Modular Jacks
To meet the requirements for I/O connectors
on AdvancedTCA and AdvancedMC cards,
Tyco Electronics has released new low
profile RJ45 modular jacks. The offset from
the board is designed such that it fits in
an AdvancedMC half height faceplate.
These jacks are shielded and include
panel ground springs for EMI containment.
They are available in single port and 1x4
configurations, with and without LEDs, and
are designed for GigE performance.
FEATURES
• Category 5e Performance
• Available in single port and 1x4
configurations
• Low profile meets half height
requirements. 4.20 mm above
PCB, 7.38 mm below PCB
• Press-fit termination to the board
• Available with various LED options
Configuration
1x1
1x1
1x1
1x1
1x4
1x4
1x4
1x4
LED (Left)
Green
Green/Yellow
None
Green
Green
Green/Yellow
None
Green
LED (Right)
Yellow
Green/Yellow
None
Green
Yellow
Green/Yellow
None
Green
Product Compliant to xTCA
or AdvancedMC Specifications
Part Number
1888250-1
1888250-2
1888250-3
1888250-4
1888251-1
1888251-2
1888251-3
1888251-4
Note: Part Numbers are RoHS compliant.
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
21
Catalog 3-1773445-8
Revised 6-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Product Compliant to xTCA or AdvancedMC Specifications (Continued)
AdvancedTCA — Front & Rear I/O Connectors – SFP Modules
The SFP (Small Form-Factor Pluggable)
supports hot swap of various types of fiber
optics and copper based transceivers into
host equipment. This allows the customer to
have a flexible change between different
protocols. The different applications are
Fiber Channel, Ethernet, and Infiniband.
SFP board cages exist in multiple versions
that fit AdvancedTCA systems.
The one port cages are available in a
one piece design (press-fit or solder) and a
two piece design (press-fit, solder or SMT).
Ganged versions (available in 1x6; 1x4;
1x2) are available with or without light
pipes. The ganged product has the
option of integrated host connector.
Tyco Electronics is currently developing
stacked versions (2x4 as primary option)
that fit AdvancedTCA requirements.
FEATURES
• Products according to MSA
(Multi-Source Agreement)
• Uses 20 positions PT connector
• Hot Swappable
• Three stage sequencing
• Supports data-rates up to 5 Gbps
• Chassis ground for pass through
EMI protection to 12.5 Gbps
• Accepts copper and fiber optic
transceivers
• Direct attach copper cable assemblies available with or without
active equalization.
www.tycoelectronics.com/product/atca
www.sfp.tycoelectronics.com
Catalog 1773408
Flyer 1654720 / 1654095 / 1773078
SFP Modules
Part Number
Product Compliant to xTCA
or AdvancedMC Specifications
Stacked
1658628-1
1658629-1
1658894-1
Ganged
1761014-1
1658744-1
1761015-1
Single
6367035-1
6367034-1
1489669-1
1489779-1
Port
Configuration
Insertion
Style
Connector
Included
Height
Profile
2x1
2x4
2x6
Press-fit
Press-fit
Press-fit
Yes
Yes
Yes
Low
Low
Low
1x2
1x4
1x6
Press-fit
Press-fit
Press-fit
No
No
No
—
—
—
1x1
1x1
1x1
1x1
Solder Tail
Solder Tail
Press-fit
Press-fit
No
No
No
No
Standard
Standard
Standard
Standard
Note: Part Numbers are RoHS compliant.
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
Infiniband is a trademark of Infiniband
Trade Association.
22
Catalog 3-1773445-8
Revised 6-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Product Compliant to xTCA or AdvancedMC Specifications (Continued)
AdvancedTCA — Front & Rear I/O Connectors — MRJ21 Receptacles
Tyco Electronics’ MRJ21 receptacle is a
high density I/O interconnect. This high
density connector supports AdvancedMC
Mid-size and Full-size module face plates
and AdvancedTCA face plates. It can also
be used for Rear I/O via Rear Transition
Modules (RTMs), as well as in
AdvancedTCA Zone 3 applications.
The MRJ21 connector is fully shielded and
provides density savings for current 10/100
or GbE RJ45/RJ21 applications. The low
profile and narrow width design will allow
more ports to be packed into less space.
Tyco Electronics offers a full end-user
solution with cleaner cabling solutions over
RJ45s, and patch panels for plug-and-play
environment, including data centers and
zone cabled or open office environments.
www.tycoelectronics.com/products/atca
FEATURES
• 1.5 to 3 times the port density
of stacked Mod Jacks (RJ45).
3 times the port density of RJ21
• Contact layout and footprint for
differential pairs creates reduced
cross-talk and built in compensation
• Connector is designed to meet or
exceed Cat 5e cross-talk
• Fully shielded system to
control EMI (Electro-magnetic
Interference)
• Robust die cast cable covers provide 45 degrees left or right cable
exit for ease of routing
• 1 mm pair spacing, 1.5 mm pair
to pair spacing
• Patch panels and cable management solutions available
MRJ21 PCB Receptacles (48-position)
Part Number
1761482-1
1761482-2
1761482-4
Panel
Grounds
No
Yes
No
PCB
Termination
Solder
Solder
Press-Fit
Receptacle Screwlocks
Part Number
1339381-1
1339381-2
Panel
Thickness
< 1mm
> 1mm to
< 2mm
Screwlocks sold separately
Note: Part Numbers are RoHS compliant.
AdvancedTCA — Thermal Products & Services
www.tycoelectronics.com/products/atca
www.thermal.tycoelectronics.com
Catalog 1309431
Flyer 1308225
FEATURES
• Tyco Electronics thermal solutions
provide optimum cooling for
active components like BGA (Ball
Grid Array), MCM modules, optical modules and power devices
• Compatible to most AdvancedTCA
connector form factors, low
profile solutions
• Off the shelf as well as customized
products
• Heat pipe technology in combination with passive heat sinks
• Advanced thermal conductive
polymer for weight and cost
reduction
• Full CFD (Computational Fluid
Dynamics) simulation and analysis, optimum Thermal design
numerical
and
analytical
approaches
Product Compliant to xTCA
or AdvancedMC Specifications
Thermal Interface Products are mandatory
for reducing the waste heat and cooling
the system in the most efficient way. Waste
heat reduces the silicon chip reliability and
performance. In addition to the products
Tyco Electronics is offering such as Heat
Sinks, Heat Pipes and CHIP COOLERs,
in all shapes and sizes, Tyco Electronics
offers state of the art Thermal Management
Services. Thermal Management is the
design practice of moving waste heat to
locations that do not affect the equipment or
overall device performance. Each Thermal
Product can be fully customized
to fulfill the specific requested system
cooling requirements.
AdvancedMC, AdvancedTCA, AdvancedTCA 300, MicroTCA and PICMG are trademarks
of PICMG-PCI Industrial Computer Manufacturers Group Incorporated.
23
Catalog 3-1773445-8
Revised 6-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Product Compliant to xTCA or AdvancedMC Specifications (Continued)
Low Profile DDR2 Connector for AdvancedTCA Standards
The new Tyco Electronics Low Profile DDR2
connector is designed for the main memory
requirements on the AdvancedTCA carrier
boards. Developed for use with a new
VLP (Very Low Profile) module from Micron
Technology, this connector meets the
AdvancedTCA height limitations on the
carrier board.
FEATURES
• Accepts new Micron Technology
VLP (Very Low Profile) DDR2
memory
module
designed
specifically for the AdvancedTCA
carrier board
• Special designed ejectors that
allow airflow to reach memory
module DRAMs for efficient
cooling
In addition, this connector offers a new
ejector design that allows airflow to reach
the memory module DRAMs for effective
cooling.
• Low module seating plane allows
for increased module space for
module components in a VLP
form factor
• Utilizes proven Tyco Electronics
DDR2 contact design for reliable
interface to the memory module
• Available in 3 solder tail lengths
and contact interface plating
options
Part Number 1888669-1
140.90
Max.
[5.547]
1.30 ± 0.05
[.051 ± .002]
Key
0.05
1.45 +– 0.08
+ .002 Card Slot
[.057 – .003 ]
7.54
[.297]
Main Body
6.85 Max. Component Height in
[.270] Extractor Shadow Area
CL of Connector
CL of Alignment Key
9.00 Max.
[.354] Latch Open
4.00
Ref.
[.157]
Product Compliant to xTCA
or AdvancedMC Specifications
2.95 Max. PCB To
[.116] Card Slot Floor
73.00
Ref.
[2.874]
3.38 ± 0.25
[.133 ± .010]
For 2.36 [.093]
Thk. PCB
1.90
[.075]
8.15
[.321]
2 Plcs. 21.00 Max.
[.827] 2 Plcs.
3.55 Max.
[.140] Key Height
0.30 Min.
[.012] 3 Plcs.
2.87 ± 0.25
[.113 ± .010]
For 1.60 [.063]
Thk. PCB
5.54
[.218]
Extractor Tower
0.36
Ref.
[.014]
4.00 Max.
[.157] 3 Plcs.
65.00
Ref.
[2.559]
Retention
Barb
2.50 Min.
[.098] 3 Plcs.
0.20
[.008]
Ref.
165.00 Max.
[6.496] Open Latch
4.20 ± 0.25
[.165 ± .010]
For 3.18 [.125]
Thk. PCB
145.00 Max.
[5.709] Latch Closed
142.00 Max.
[5.591] PCB Footprint
14.50 Min.
[.571] 2 Plcs.
21.00 Max.
[.821] 2 Plcs.
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
Note: Part Numbers are RoHS
compliant.
10.00 Min.
[.394] 2 Plcs.
5.00 Min.
[.197] 2 Plcs.
24
Catalog 3-1773445-8
Revised 6-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Product Compliant to xTCA or AdvancedMC Specifications (Continued)
Small Outline Dual In-Line Memory Module (SO DIMM) for AdvancedMC Applications
The Small Outline Dual In-Line Memory
Module (SO DIMM) is the latest in the
Tyco Electronics DIMM product line and
was specifically designed to meet the
AdvancedMC Specification. The SO DIMM
has 200 positions in a dual row design,
and features gold flash solder tail contact
plating. Available in two heights, the SO
DIMM will fit any AdvancedMC Application.
FEATURES
• 200 positions
• Gold Flash Solder Tail Contact
Plating
Part Number
1981281-4
1981276-4
1981287-4
1981284-4
Stack Height
5.20
.203
5.20
.203
9.20
.360
9.20
.360
Keying Feature
Reverse
Standard
Reverse
Standard
Part Number 1981281-4
66.80
[2.611]
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
Product Compliant to xTCA
or AdvancedMC Specifications
1.35
[.053]
0.85
[.033]
Note: Part Numbers are RoHS compliant.
25
Catalog 3-1773445-8
Revised 6-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Product Compliant to xTCA or AdvancedMC Specifications (Continued)
1.0 mm Free Height (FH) (IEEE 1386) Connectors
As a standard for adding local PCI or Sbus
performance to Futurebus+ and VMEbus
applications, IEEE 1386 offers new levels of
performance and packaging convenience
through the mezzanine architecture.
Tyco Electronics makes it easier and more
productive to add an IEEE 1386 mezzanine
connector to your system. The surface-mount
parallel stacking connector features contacts
on a 1.0 [.039] pitch and is available in eight
stacking heights from 8 [.315] to 15 [.591]. Sizes
include the IEEE 1386 standard 64-position
version and an optional 84-position version.
Not only is the connector compatible with EIA700 AAAB — the connector standard for IEEE
1386 mezzanine connectors — it offers several enhancements that make it easier to use
and more reliable. Increased plastic clearance between mating connectors makes it
easier to align multiple connectors for mating,
thus eliminating stress to the solder joints during engagement. Improved locating posts
allow fast, highly accurate hand placement of
connectors. The connectors are available with
vacuum covers for automated placement.
Performance Characteristics
• For board stacking applications
• High density packaging on
1.0 [.039] centerline spacing
• Available in standard 64-position
and optional 84-position sizes
• “Tape-and-reel” packaged per
EIA standards
• Board stacking heights available
from 8 [.315] to 15 [.591]
• Increased plastic clearance
eliminates stress to solder joints
during mating
• Improved locating posts provide
accurate hand or robotic placement
• Meets EIA-700 AAAB specifications for IEEE 1386 applications
No. of
Positions
64
Current Rating —
1.0 ampere per contact
Contact Resistance —
30 milliohms max. (initial)
Durability — tested to 100 mating
cycles min.
84
Product Specification
108-2246
Height
5.37
.211
7.37
.290
8.37
.330
10.37
.408
5.37
.211
7.37
.290
8.37
.330
10.37
.408
Receptacle Part Number
30µ" Au Plating
50µ" Au Plating
w/ pickup cap
w/ pickup cap
5120528-1
1-5120528-1
5120529-1
1-5120529-1
5120530-1
1-5120530-1
5120531-1
1-5120531-1
5120528-2
1-5120528-2
5120529-2
1-5120529-2
5120530-2
1-5120530-2
5120531-2
1-5120531-2
Notes: 1. Shorter solder lands may be used per EIA-700 AAAB. However,
the 2.4 [.094] length assures optimum solder fillet regardless of
connector manufacturer.
1.0 mm FH (IEEE 1386)
Receptacles and Plugs
without Locating Posts,
1.0 [.039] Pitch
Product Compliant to xTCA
or AdvancedMC Specifications
FEATURES:
No. of
Positions
8 [.315] thru 15 [.591]
Stacking Heights
64
Material and Finish
Housing — Liquid crystal polymer,
black
Contacts — Phosphor bronze; duplex
plated 0.00076 [.000030] or .00127
[.00050] min. gold on contact area,
0.00381 [.000150] min. tin on solder
area, with entire contact underplated
0.00127 [.000050] min. nickel
Vacuum Cover — Aluminum Alloy
84
Height
6.35
.250
7.35
.289
8.35
.329
6.35
.250
7.35
.289
8.35
.329
Plug Part Number
30µ" Au Plating
50µ" Au Plating
w/ pickup cap
w/ pickup cap
5120532-1
1-5120532-1
5120533-1
1-5120533-1
5120534-1
1-5120534-1
5120532-2
1-5120532-2
5120533-2
1-5120533-2
5120534-2
1-5120534-2
Notes: 1. Shorter solder lands may be used per EIA-700 AAAB. However,
the 2.7 [.106] length assures optimum solder fillet regardless of
connector manufacturer.
Technical Documents
EIA-700 AAAB Specification
Application Specification
114-25045
AdvancedMC, AdvancedTCA, AdvancedTCA 300, MicroTCA and PICMG are trademarks of PICMG-PCI Industrial Computer
Manufacturers Group Incorporated.
Note: Part Numbers are RoHS compliant.
26
Catalog 3-1773445-8
Revised 6-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Product Compliant to xTCA or AdvancedMC Specifications (Continued)
AdvancedTCA — Power Distribution & Management Modules
Tyco Electronics Power Systems introduces
the industry's first power input management
solution for AdvancedTCA boards. The
AdvancedTCA power input module (PIM)
is designed in collaboration with industry
leading AdvancedTCA board manufacturers
and provides innovative features and
compact design. PIM modules incorporate
all the features required by AdvancedTCA
specifications (PICMG 3.0) and enable
designers to save valuable board real estate
and reduce overall board cost and time to
market compared to discrete solutions.
FEATURES
• 200/300 W of power (per PICMG
3.0)
• Inrush control protection
• Integrated EMI filter designed to
meet CISPR Class B Limits
• Directive 2002/95/EC RoHS compliant
• 8 W of Isolated auxiliary power
supply for IPMI (3.3 V or 5 V)
• O-Ring FETs for -48 V A&B feeds
A Complete Power Architecture
• A/B feed loss alarm
PIM series along with Tyco Electronics’
isolated DC/DC and bus converters and
point of load modules, provide a complete
and low-cost power architectural solution
while complying with AdvancedTCA board
power requirements.
• Hot-swap control
www.tycoelectronics.com/products/atca
www.power.tycoelectronics.com
Flyer PIM05-001
• 72 V charging voltage for holdup/
bulk capacitors
• Through-hole and surface mount
(SMT) versions
• Input under-voltage and over-voltage protections
• Over current and thermal protections
• UL /CSA /CE / VDE approved
PICMG 3.0 compliant
Fully tested & burned-in
Fully qualified
Parts count
Design-in time
Assembly cost
Yield/Repair cost
Time to market
Standard off-shelf part
PIM
Yes
Yes
Yes
1
Lower
Lower
Lower
Lower
Yes
Discrete
Board level
Board level
Board level
> 100
Higher
Higher
Higher
Higher
No
PIM200/PIM300
Input Voltage
PIM200FZ
PIM200AZ
PIM300FZ
PIM300AZ
-48 V (-38 to -75 V DC)
-48 V (-38 to -75 V DC)
-48 V (-38 to -75 V DC)
-48 V (-38 to -75 V DC)
Output
Power
200 W
200 W
300 W
300 W
Vmg/mt
Output
-3.3 V DC
-5.0 V DC
-3.3 V DC
-5.0 V DC
Connector
Type
Thru Hole
Thru Hole
Thru Hole
Thru Hole
Product Compliant to xTCA
or AdvancedMC Specifications
Device Code
Comcode
CC109101813
CC109106762
CC109113858
CC109122322
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
27
Catalog 3-1773445-8
Revised 6-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Product Compliant to xTCA or AdvancedMC Specifications (Continued)
AdvancedTCA — Power Distribution & Management Modules
(Continued)
PIM series along with Tyco Electronics’ isolated DC/DC and
bus converters and point of load modules, provides a complete
and low-cost power architectural solution while complying
with AdvancedTCA power board requirements.
Isolated Bus Converters
Full Featured DC-DC
Converter Series
EQW006A0B
EQW010A0B
QBW018A0B
QBW025A0B
JRB017A0B
Output
Power (W)
72 W
120 W
200 W
300 W
200 W
Output
Current (A)
6A
10 A
18 A
25 A
17 A
Input
Voltage (V)
48 V (36 – 75)
48 V (36 – 75)
48 V (36 – 75)
48 V (36 – 75)
48 V (36 – 75)
Output
Voltage (V)
12 V (11.6 – 12.4)
12 V (11.4 – 12.6)
12 V (11.4 – 12.6)
12 V (11.4 – 12.6)
12 V (11.7 – 12.3)
Efficiency
(%)
92 %
93 %
94 %
94 %
92 %
Current
Share
No
No
Yes
Yes
Yes
Form
Factor
Eight-Brick
Eight-Brick
Qtr-Brick
Qtr-Brick
Half-Brick
Connection
Type
TH/SMT
TH
TH
TH
TH
Base
Plate
No
Yes
Yes
Yes
Yes
Non-Isolated DC-DC Converters
Output
Current (A)
3A
5A
10 A
16 A
Input Voltage
Range (V)
8.3 – 14 V
10 – 14 V
10 – 14 V
10 – 14 V
Output Voltage
Range (V)
0.75 – 5.0 V
0.75 – 5.0 V
0.75 – 5.0 V
0.75 – 5.0 V
Efficiency
(%)
91 %
89 %
93 %
92 %
Output
Programmable
Yes
Yes
Yes
Yes
Remote
On/Off
Yes
Yes
Yes
Yes
Remote
Sense
No
No
Yes
Yes
EZSequence
No
No
No
No
Connector
Type
SIP/SMT
SIP/SMT
SIP/SMT
SIP/SMT
Austin Lynx II
Series
Austin MicroLynx II
Austin Lynx II
Austin SuperLynx II
Austin MegaLynx II
Output
Current (A)
6A
10 A
16 A
25 A
Input Voltage
Range (V)
8.3 – 14 V
8.3 – 14 V
8.3 – 14 V
6.0 – 14 V
Output Voltage
Range (V)
0.75 – 5.0 V
0.75 – 5.0 V
0.75 – 5.0 V
0.80 – 3.3 V
Efficiency
(%)
89 %
93 %
92 %
92.5 %
Output
Programmable
Yes
Yes
Yes
Yes
Remote
On/Off
Yes
Yes
Yes
Yes
Remote
Sense
No
Yes
Yes
Yes
EZSequence
Yes
Yes
Yes
Yes
Connector
Type
SIP/SMT
SIP/SMT
SIP/SMT
SIP/SMT
Product Compliant to xTCA
or AdvancedMC Specifications
Austin Lynx
Series
Austin MiniLynx
Austin MicroLynx
Austin Lynx
Austin SuperLynx
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
28
Catalog 3-1773445-8
Revised 6-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Part Number Index
Note: This index lists all cataloged parts
by base no. only. Complete part nos. (with
prefixes and/or suffixes) are shown on the
page(s) indicated.
Part No.
120943
120954
120955
120956
120957
120958
1339381
1367703
1469269
1469372
1469373
1469374
1469387
1469388
1469735
1469737
1469793
1469795
1469820
1469920
1469921
1469922
1469974
1469977
1489669
1489779
1658628
1658629
1658744
1658894
Page
11
11
11
11
11
11
23
13
15
15
15
15
15
15
12
12
12
12
16
18
19
19
12
12
22
22
22
22
22
22
Part No.
1761014
1761015
1761482
1766500
1766501
1766502
1766503
1888250
1888251
1888506
1888507
1888508
1888509
1888652
1888653
1888654
1888655
1888669
1888765
1888766
1934018
1934021
1934026
1934029
1934034
1934037
1934218
1934221
1934222
1934225
Page
22
22
23
5, 6
5, 6
6
6
21
21
20
20
20
20
20
20
20
20
24
14
14
12
12
12
12
12
12
12
12
12
12
Part No.
1934226
1934229
1981276
1981281
1981284
1981287
5120528
5120529
5120530
5120531
5120532
5120533
5120534
5223961
5223963
6367034
6367035
6469001
6469002
6469046
6469048
6469061
6469062
6469074
6469099
6469286
6469287
6469294
6469296
6469375
Part No.
91349-4
91378-1
91378-3
1583220-1
1583224-1
1583224-2
1583224-3
Page
9
10
10
9
8
8
8
Part No.
1583224-4
1583237-1
1583248-1
1583255-1
1804174-1
1804177-1
Page
12
12
25
25
25
25
26
26
26
26
26
26
26
11
11
22
22
7, 8, 10
7, 9
9
10
8
9
9
9
8
9
8
9
10
Part Number
Tooling
Part Number
Index (Continued)
Index
Part No.
91347-1
91347-2
91347-3
91347-4
91349-1
91349-2
91349-3
Page
8
8
8
8
9
9
9
Page
8
9
8
9
10
10
29
Catalog 3-1773445-8
Revised 6-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Tyco Electronics “At Your Service”
Need more information?
Website
Call Technical Support at
the numbers listed on the
next page.
At www.tycoelectronics.com
you’ll find many useful applications and plenty of product information
Technical Support is staffed
with specialists well versed in
all Tyco Electronics products.
They can provide you with :
· Product News —
■ Technical Support
· Products —
The latest information on new developments from various Tyco Electronics brands.
· Industries —
Use our industry pages to quickly find the right product for your application.
Discover information on our vast array of products ranging from Amplifiers to Wire & Cable.
■ Catalogs
■ Technical Documents
■ Product Samples
· Customer Service and Support –
Find contact numbers for Customer Service and Product Information Help Desks plus
FAQs and online technical assistance.
■ Tyco Electronics
Authorized Distributor
Locations
Product Websites
www.tycoelectronics.com/products/atca
www.tycoelectronics.com
www.elastomerictech.com
www.power.tycoelectronics.com
www.antenna.tycoelectronics.com
www.hmzd.tycoelectronics.com
www.mpi.tycoelectronics.com
www.thermal.tycoelectronics.com
www.multigigrt.tycoelectronics.com
www.elconproducts.com
www.tycoelectronics.com/fiberoptics
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
30
Catalog 3-1773445-8
Revised 6-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Global Contacts
Americas
Argentina – Buenos Aires
+54-11-4733-2200
Phone:
Fax:
+54-11-4733-2211
Brasil – São Paulo
Phone:
+55-11-3611-1311
Fax:
+55-11-3611-0397
Canada – Toronto
+905-475-6222
Phone:
Fax:
+905-474-5520
Product Information Center:
(Technical Support)
Phone:
+905-470-4425
Fax:
+905-474-5525
Colombia – Bogota
Phone:
+57-1-231-9398
+57-1-660-0206
Fax:
Mexico – Mexico City
+52-55-1106-0800
Phone:
+01-800-733-8926
Fax:
+52-55-1106-0901
For Latin/South American
Countries not shown
Phone:
+54-11-4733-2015
Fax:
+54-11-4733-2083
United States – Harrisburg, PA
Phone:
+717-564-0100
+717-986-7575
Fax:
Product Information Center:
(Technical Support)
+800-522-6752
Phone:
Fax:
+717-986-7575
Asia/ Pacific
Australia – Sydney
Phone:
+61-2-9554-2600
+61-2-9502-2556
Fax:
Product Information Center:
(Technical Support)
+61-2-9840-8200
Phone:
Fax:
+61-2-9634-6188
Japan – Toyko
Phone:
+81-44-844-8111
+81-44-812-3207
Fax:
Product Information Center:
(Technical Support)
+81-44-844-8013
Phone:
Fax:
+81-44-812-3200
New Zealand – Auckland
Phone:
+64-9-634-4580
+64-9-634-4586
Fax:
Singapore – Singapore
+65-6482-0311
Phone:
Fax:
+65-6482-1012
Philippines – Makati City
Phone:
+632-848-0171
+632-867-8661
Fax:
Thailand – Bangkok
Phone:
+66-2-955-0500
Fax:
+66-2-955-0505
India – Bangalore
Phone:
+91-80-285-40800
+91-80-285-40820
Fax:
Korea – Seoul
Phone:
+82-2-3415-4500
+82-2-3486-3810
Fax:
People’s Republic of China
Hong Kong
+852-2735-1628
Phone:
Fax:
+852-2735-0243
Vietnam and Indochina –
Ho Chi Minh City
Phone:
+84-8 930-5546
Fax:
+84-8 930-3443
Indonesia – Jakarta
+65-6482-0311
Phone:
Fax:
+65-6482-1012
Malaysia – Kuala Lumpur
+60-3-78053055
Phone:
Fax:
+60-3-78053066
Shanghai
Phone:
Fax:
+86-21-2407-1588
+86-21-2407-1599
Taiwan – Taipei
+886-2-8768-2788
Phone:
Fax:
+886-2-8768-2268
Europe/ Middle East/Africa
Austria – Vienna
Phone:
+43-1 90 5 60-0
Fax:
+43-1 90 5 60-1333
Belgium – Kessel-Lo
Phone:
+32-16-35-23-00
Fax:
+32-16-35-23-52
Germany – Bensheim
Phone:
+49-6251-133-0
Fax:
+49-6251-133-1600
Product Information Center:
(Technical Support)
Phone:
+49-6251-133-1999
Fax:
+49-6251-133-1988
Bulgaria – Sofia
Phone:
+359-2-971-2152
Fax:
+359-2-971-2153
Germany – Langen
Phone:
+49-6103-709-0
Fax:
+49-6103-709-1223
Czech Republic – Kurim
Phone:
+420-5-41-162-111
Fax:
+420-5-41-162-223
Germany – Speyer
Phone:
+49-6232-30-0
Fax:
+49-6232-30-2243
Denmark – Glostrup
Phone:
+45-43-480-452
Fax:
+45-43-441-414
Germany - HTS Division – Neunkirchen
Phone:
+49-2247-305-0
Fax:
+49-2247-305-122
Egypt – Cairo
Phone:
+20-2-29 04 281
Fax:
+20-2-41 92 334
Greece – Athens
Phone:
+30-210-9370-396/397
Fax:
+30-210-9370-655
Estonia – Tartu
Phone:
+372-5138-274
Fax:
+372-7400-779
Hungary – Budapest
Phone:
+36-1-289-1000
Fax:
+36-1-289-1010
Finland – Helsinki
Phone:
+358-95-12-34-20
Fax:
+358-95-12-34-250
France – Cergy-Pontoise
Phone:
+33-1-3420-8888
Fax:
+33-1-3420-8600
Product Information Center:
(Technical Support)
Phone:
+33-1-3420-8943
Fax:
+33-1-3420-8623
3-1773445-8–2.5M–LUG–FP–6-07
Printed in the U.S.A.
Ireland – Dublin
Phone:
+353-1-820-3000
Fax:
+353-1-820-9790
Israel – Yokneam
Phone:
+972-4-959-0508
Fax:
+972-4-959-0506
Italy – Collegno (Torino)
Phone:
+39-011-4012-111
Fax:
+39-011-4031116
Lithuania – Vilnius
Phone:
+370-5-2131-402
Fax:
+370-5-2131-403
Netherlands – ’s-Hertogenbosch
Phone:
+31-73-624-62-46
Fax:
+31-73-621-23-65
Product Information Center:
(Technical Support)
Phone:
+31-73-6246-999
Fax:
+31-73-6246-998
Norway – Nesbru
Phone:
+47-66-77-8886
Fax:
+47-66-77-8855
Poland – Warsaw
Phone:
+48-22-45-76-700
Fax:
+48-22-45-76-720
Romania – Bucharest
Phone:
+40-21-311-3479/3596
Fax:
+40-21-312-0574
Russia – Moscow
Phone:
+7-495-926-5506/07/08/09
Fax:
+7-495-926-5505
Russia – St. Petersburg
Phone:
+7-812-718-8192
Fax:
+7-812-718-8193
Slovenia – Ljubljana
Phone:
+386-1561-3270
Fax:
+386-1561-3240
South Africa – Port Elizabeth
Phone:
+2741-503-4500
Fax:
+2741-581-0440
Spain – Barcelona
Phone:
+34-93-291-0330
Fax:
+34-93-201-7879
Product Information Center:
(Technical Support):
Phone:
+34-93-291-0330
Fax:
+34-93-200-3779
Sweden – Upplands Väsby
Phone:
+46-8-50-72-50-00
Fax:
+46-8-50-72-50-01
Switzerland – Steinach
Phone:
+41-71-447-0447
Fax:
+41-71-447-0444
Turkey – Istanbul
Phone:
+90-212-281-8181/2/3
Fax:
+90-212-281-8184
Ukraine – Kiev
Phone:
+380-044-206-2265
Fax:
+380-044-206-2264
United Kingdom – Swindon
Phone:
+44-8706-080-208
Fax:
+44-1793-572-516
Product Information Center:
(Technical Support)
Freephone GB: 0800-267-666
Phone:
+44-8706-080-208
Fax:
+44-208-420-8081
For Middle East/African Countries
Not Shown
Phone:
+33-1-3420-8866
Fax:
+33-1-3420-8300
Tyco Electronics Corporation
www.tycoelectronics.com
Solutions for AdvancedTCA,
AdvancedTCA 300, MicroTCA,
and AdvancedMC Standards
Tyco Electronics Corporation
Harrisburg, PA
tycoelectronics.com
3-1773445-8–2.5M–LUG–FP–6-07
RoHS
Ready
工商网监
湘ICP备2023018690号
