1210A-001D-3S

1210 1psi SPECIFICATIONS      PC Board Mountable Pressure Sensor 0-100 mV Output Current Excitation Gage and Differential Temperature Compensated The 1210 1psi is a temperature compensated, piezoresistive silicon pressure sensor packaged in a dual-in-line configuration. It is intended for cost sensitive applications where excellent performance and long-term stability are required. Integral temperature compensation is provided over a range of 0-50°C using laser-trimmed resistors. An additional laser-trimmed resistor is included to normalize pressure sensitivity variations by programming the gain of an external differential amplifier. This provides sensitivity interchangeability of ±1%. Please refer to the 1210 standard datasheet for information on products with operating pressures greater than 1psi. For voltage excitation, please refer to the Model 1220. SENSOR SOLUTIONS /// 1210 7/2017 Page 1 1210 1psi FEATURES     Dual-in-Line Package 1.0% Interchangeable Span (provided by gain set resistor) ±0.3% Non Linearity Solid State Reliability APPLICATIONS      Medical Instruments Airspeed Measurement Process Control Factory Automation Leak Detection STANDARD RANGES Range 0 to 1 psid  psig  Port Styles S, L, N, B* *Barb port styles are only available in lead configuration type 3. See Ordering Information. SENSOR SOLUTIONS /// 1220 7/2017 Page 2 1210 1psi PERFORMANCE SPECIFICATIONS Supply Current: 1.5 mA Ambient Temperature: 25°C (unless otherwise specified) PRESSURE RANGE 0 – 1 psi PARAMETERS MIN TYP MAX UNITS NOTES 150 mV 1 2.0 mV 0.3 %Span 0.1 %Span Full Scale Output Span 50 Zero Pressure Output (Offset) -2.0 Pressure Non Linearity -0.3 Pressure Hysteresis -0.1 Input/Output Resistance 1800 6500 Ω Temperature Error – Span -1.0 ±0.5 1.0 %Span 3 Temperature Error – Zero -1.0 ±0.5 1.0 100 ±0.01 2 %Span 3 Thermal Hysteresis – Zero ±0.1 %Span 3 Long Term Stability (Offset & Span) ±0.2 %Span/year Supply Current 1.5 mA 4 Response Time (10% to 90%) 0.5 1.0 2.0 mSec 5 Output Noise 1.0 µV p-p 6 7 Output Load Resistance 2 MΩ Insulation Resistance (50Vdc) 50 MΩ Pressure Overload Operating Temperature Storage Temperature 10 psi -40 +125 °C -50 +150 °C Media Non-Corrosive Dry Gases Compatible with wetted materials Weight 3 grams 8 Notes 1. Output span of unamplified sensor. 2. Best fit straight line. 3. Temperature range: 0°C to 50°C with reference to 25°C. 4. Guarantees input/output ratiometricity for span. 5. For a zero-to-full scale pressure step change. 6. 10Hz to 1kHz. 7. Prevents increase of TC-Span due to output loading. Wetted materials: glass, ceramic, silicon, fluorosilicone, nickel, gold and aluminum Additional Notes Soldering leads pins: 250°C for 5 seconds, maximum. SENSOR SOLUTIONS /// 1220 7/2017 Page 3 1210 1psi DIMENSIONS (TUBE VERSION) SENSOR SOLUTIONS /// 1220 7/2017 Page 4 1210 1psi DIMENSIONS (BARB VERSION) SENSOR SOLUTIONS /// 1220 7/2017 Page 5 1210 1psi CONNECTIONS APPLICATION SCHEMATIC SENSOR SOLUTIONS /// 1220 7/2017 Page 6 1210 1psi ORDERING INFORMATION 1210A - 001 G - 3 S Vent (L = Long, S = Short, N = None, B = Barb) Lead Configuration (1 = Same side as vent, 3 = Opposite side as vent) Type (G= Gage, D = Differential) Pressure Range Model *Barb vent port style only available in lead configuration type 3. NORTH AMERICA EUROPE ASIA Measurement Specialties, Inc., a TE Connectivity Company Tel: 800-522-6752 customercare.frmt@te.com Measurement Specialties (Europe), Ltd., a TE Connectivity Company Tel: 800-440-5100 customercare.bevx@te.com Measurement Specialties (China), Ltd., a TE Connectivity Company Tel: 0400-820-6015 mailto:customercare.shzn@te.com TE.com/sensorsolutions Measurement Specialties, Inc., a TE Connectivity company. Measurement Specialties, TE Connectivity, TE Connectivity (logo) and EVERY CONNECTION COUNTS are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. © 2015 TE Connectivity Ltd. family of companies SENSOR SOLUTIONS /// 1220 All Rights Reserved. 7/2017 Page 7