1267900002

SPECIFICATION CONTROL DRAWING Product Revision Product Name S02-17-R-XX * Ident. Code SZ2A26 S02-18-R-XX * SZ3A26 S02-20-R-XX * SZ5A26 Component Dimensions H øB L±1.75 min min (L±0.07) 16.50 8.25 2.65 (0.650) (0.325) (0.105) 16.50 8.25 4.30 (0.650) (0.325) (0.170) 19.10 8.25 7.00 (0.750) (0.325) (0.275) øC min 3.68 (0.145) 5.08 (0.200) 7.60 (0.300) øD max 2.65 (0.105) 4.30 (0.170) 7.00 (0.275) Cable Dimensions øE øF max min 3.68 1.40 (0.145) (0.055) 5.08 2.15 (0.200) (0.085) 7.60 4.30 (0.300) (0.170) øG max 0.72 (0.030) 1.25 (0.050) 2.50 (0.100) * Consult Raychem for individual product revision. Contains more than 1 part name. MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked polyvinylidene fluoride. 2. SOLDER PREFORM WITH FLUX AND THERMAL INDICATOR: SOLDER: TYPE Sn63 per ANSI J-STD-006. FLUX: TYPE ROL1 per ANSI-J-STD-004. THERMAL INDICATOR: Color change violet to colorless. 3. SEALING RINGS: Environment resistant thermoplastic. Color: blue. 4. PRE-INSTALLED LEAD: MIL-W-22759/32-26-XX*. (Raychem 55A0111-26-XX*) *XX: Part name and lead callout shall be replaced with lead color designation per MIL-STD-681. Colors available: solid and with single stripe. APPLICATION 1. These parts are designed to provide an environment protected shield termination on cables, rated for 105°C minimum, meeting the dimensional criteria listed and having tin or silver plated shields and insulation compatible with the insert material. For compatible insulations, see SAE-AS83519/2 or consult Raychem. 2. When installed per Raychem process standard RCPS-100-70, assemblies will meet those requirements of Raychem Specification RT-1404 and SAE-AS83519/2. 3. For assembly information, refer to Raychem document RCPS-100-70. 4. Parts shall be marked with identification code per table. 5. For best results, prepare the cable as shown: - Strip length of shield: 6.35 – 8.25 (0.250 - 0.325) - Use methods (a) or (b) with cable rated for 125°C and above. Use method (c) for cables rated for 105°C and cable with spiral wrapped shields. a) Window Strip 307 Constitution Drive Menlo Park, CA 94025, USA b) End Strip Wire and Harnessing Products Unless otherwise specified dimensions are in millimeters. Inches dimensions are in between brackets. Tyco Electronics reserves the right to ANGLES: N/A TOLERANCES: amend this drawing at any time. Users 0.00 N/A should evaluate the suitability of the ROUGHNESS IN 0.0 N/A product for their application. MICRON 0 N/A c) End Strip with Fold Back TITLE : SOLDERSLEEVE SHIELD TERMINATION ENVIRONMENT RESISTANT WITH LEAD DOCUMENT NO.: S02-17/-18/-20-R-XX DCR NUMBER: REPLACES: D010447 DRAWN BY: DATE: PROD. REV. DOC ISSUE: M. FORONDA July 31, 2001 SEE TABLE 1 If this document is printed it becomes uncontrolled. Check for the latest revision. SCALE: None N/A SIZE: A SHEET: 1 of 1