127155-000

Materials -71 Semirigid Modified Polyolefin Product Facts ■ ■ Flexible Flame-retardant 4 Molded Parts Applications Installation Operating Temperature Range TE -71 material is a flexible, flame-retardant polyolefin suitable for use in general harnessing applications. The material is very flexible and offers a good balance of fluid and heat resistance. If Uniboot molded parts are required, -71 should be chosen as a replacement for -4. The standard color is black. -71 molded parts will shrink on the application of heat above 125°C [257°F]. -55°C to 135°C -67°F to 275°F] Available in: Recommended installation temperature is 150°C [302°F] Americas Europe Asia Pacific ■ ■ ■ 4-41 Catalog 1654025 Revised 5-12 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico/C. Am.: +52 (0) 55-1106-0800 Latin/S. Am.: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015 Materials -71 (Continued) Specifications/Approvals TE RT-1316 Military SAE-AS81765/1, Type II Product Characteristics Physical Thermal Electrical Water absorption Fluid resistance Tensile strength Ultimate elongation Specific gravity Heat aging for 168 hr at 175°C [347°F] Heat shock for 4 h at 250°C [482°F] Low-temperature flex for 4 h at -55°C [-67°F] Flammability (burn time) Electric strength — Aviation fuel JP-4 (MIL-T-5624) Lubricating oil O-149 (MIL-L-7808) Hydraulic fluid (MIL-H-5606) Skydrol® 500 Specification Requirements 10 MPa (min.) 250% (min.) 1.40 (max.) Ultimate elongation 200% (min.) No dripping, cracking, or flowing No cracking during mandrel bend 90 s (max.) 8 MV/m 0.5% (max.) Tensile strength 5 MPa (min.) Ultimate elongation 200% (min.) Tensile strength 5 MPa (min.) Ultimate elongation 200% (min.) Tensile strength 5 MPa (min.) Ultimate elongation 200% (min.) Tensile strength 5 MPa (min.) Ultimate elongation 200% (min.) Test Method ASTM D 412 ASTM D 412 ASTM D 792 ASTM D 412 ASTM D 2671 ASTM D 2671 ASTM D 635 ASTM D 149 ASTM D 570 ASTM D 412 after immersion for 24 h at 25°C [77°F] ASTM D 412 after immersion for 24 h at 25°C [77°F] ASTM D 412 after immersion for 24 h at 25°C [77°F] ASTM D 412 after immersion for 24 h at 25°C [77°F] Canada: +1 (905) 475-6222 Mexico/C. Am.: +52 (0) 55-1106-0800 Latin/S. Am.: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015 4-42 Catalog 1654025 Revised 5-12 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 (800) 522-6752