1393218-1

SCHRACK MINIATURE PCB RELAY REL GENERAL PURPOSE LOW POWER PCB RELAYS INTRODUCTION TE Connectivity (TE)’s Miniature Power PCB Relays REL is general purpose relay designed for various types of loads (e.g., resistive, inductive) with low height. The relay is designed as 1 pole 5A with 1 form A (NO) contact and is in flux proof version. The relay is especially suited for applications white goods, consumer electronics, etc. FEATURES • 1 pole 5 A, 1 form A (NO) contact • Low height 12.0mm • Especially suited for applications white goods, consumer electronics, etc. • Plastic materials according to IEC 60335-1 (domestic appliances) APPLICATIONS • PLC’s • Timers • Temperature control • I/O cards • White goods APPROVALS • VDE Cert. No. 40010579 • UL E214025 Technical data of approved types on request Z SCHRACK Miniature PCB Relay REL General Purpose Relays | Low Power PCB Relays CONTACT DATA ELECTRICAL ENDURANCE Contact arrangement 1 form A (NO) Rated voltage 250VAC Max. switching voltage 400VAC Rated current 5A Limiting making current, max 4s, duty factor 10% 15A Contact material AgNi 90/10 Frequency of operation with/without load 360/72000 ops./h Operate/release time max. 10/5ms Bounce time max. 4ms CONTACT RATINGS Type Contact Load Cycles IEC 61810 REL34 A (NO) 5A, 250VAC, cosφ=1, 85°C 100x103 REL34 A (NO) 3A, 400VAC, cosφ=1, 85°C 400x103 5A, 250VAC, resistive, 85°C 100x103 UL61810-1 (UL508) REL34 A (NO) Mechanical endurance >10x106 operations CONTACT DATA Coil voltage range 5 to 48 VDC Operative range, IEC 61810 2 Coil insulation system according UL1446 F MAX. DC LOAD BREAKING CAPACITY INDUSTRIAL / PCB RELAYS COIL VERSIONS, DC COIL Coil code Rated Operate voltage voltage VDC VDC Release voltage VDC Coil resistance Ω±10%1) Rated coil power mW 5 5 3.75 0.5 70 357 6 6 4.5 0.6 100 360 12 12 9.0 1.2 400 360 24 24 18.0 2.4 1600 360 36 36 27.0 3.6 36001) 360 48 48 36.0 4.8 64001) 360 1) Coil resistance ±15%. All figures are given for coil without pre-energization, at ambient temperature +23°C. Other coil voltages on request. COIL OPERATING RANGE DC 2 SCHRACK Miniature PCB Relay REL General Purpose Relays | Low Power PCB Relays OTHER DATA INSULATION DATA Initial dielectric strength Between open contacts 1000Vrms Between contact and coil 3000Vrms Material compliance Initial insulation resistance Open contact circuit >10x10⁹Ω Coil-contact circuit >10x10⁹Ω Clearance/creepage Between contact and coil Material group of insulation parts EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/ rohssupportcenter Resistance to heat and fire according EN60335, par.30 Ambient temperature -40 to +85°C Category of environmental protection ≥4/4mm IIIa IEC 61810 Shock resistance (destructive) Terminal type Weight RTII - flux proof 100 g PCB-THT 5g Resistance to soldering heat THT IEC 60068-2-20 Packaging/unit PCB LAYOUT / TERMINAL ASSIGNMENT 270°C/10s tube/25 pcs., box/500 pcs. DIMENSIONS (UNIT: mm) Bottom view on solder pins INDUSTRIAL / PCB RELAYS 3 PRODUCT CODE STRUCTURE Part Number REL 3 4 024 Coil Type RE Coil Miniature PCB Relay REL code please refer to coil versions table Contact Configuration 3 1 form A (NO) contact Contact material 4 AgNi 90/10 PRODUCT INFORMATION Product code Version Contacts Contact material REL34006 REL34012 REL34024 flux proof REL34048 1 form A 1 NO contact AgNi90/10 Coil TE Part Number 6VDC 3-1415535-5 12VDC 3-1415535-6 24VDC 3-1415535-7 48VDC 3-1415535-8 te.com ©2023 TE Connectivity. All Rights Reserved. TE Connectivity, TE connectivity (logo) and Every Connection Counts are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. While TE has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any changes to the information contained herein without prior notice. TE Connectivity assumes only those obligations set forth in the terms and conditions for this product and shall in no event be liable for any incidental, indirect, or consequential damages arising out of the sale, resale, use, or misapplication of the product. TE expressly disclaims any implied warranties with respect to the information contained herein, including, but not limited to, implied warranties of merchantability or fitness for a particular purpose. Dimensions, specifications and/or information contained herein are for reference purposes only and are subject to change without notice. Consult TE for the latest dimensions, specifications and/or information. Users of TE Connectivity products must make their own assessment as to whether the respective product is suitable for the respective desired application. 07/23    ED INDUSTRIAL / PCB RELAYS