1393803-6

General Purpose Relays PCB Relays SCHRACK Reed Relay V23100 -V6 n Reed contact size n Dust protected n 1 or 2 make contacts, neutral, monostable or n 1 make and 1 break contact, polarised, monostable n Printed circuit mounting n Small Contact Data A101 A201 A112 Minimum voltage Ul VDC 3.7 4.5 8.4 16.4 Maximum voltage Ull VDC 10.8 10.8 21.6 42.5 Contact arrangement 1 make 2 makes 1 make 1 break Maximum 100 switching voltage Maximum switching current break 0.25 A make 0.5 A 0.5 A 0.5 A Maximum power 10 W rating Maximum continuous current break make - - 0.25 A 0.75 A 0.75 A 0.75 A Coil Data Coil code 004 001 002 003 Rated voltage VDC 5 6 12 24 Resistance at 20°C Ω 430 ± 43 430 ± 43 1100 ± 110 3860 ± 580 General A101 A201 A112 Operating voltages see „Coil table“ Maximum temperature 100 °C Continuous max. 0,4 W thermal load at 20°C ambient temperature Permissible -25….+70°C ambient t emperature Operate time approx. 700 µs Release time approx. 500 µs Bounce time approx. 300 µs Maximum 500 operations/s switching rate Test voltage contact 250 V ACrms 250 V ACrms 250 V ACrms tip/contact tip 1500 V ACrms 1500 V ACrms 750 V ACrms contact/winding Electrical life at 28 V DC/125 mA Approx. 106 operations Mechanical life A pprox. 109 operations The operating voltage limits UI and UII depend on temperature and can be calculated by: UI tu = kI * UI 20°C and UII tu = kII * UII 20°C tU = ambient temperatur UItU = minimum voltage at ambient temperature tU UII tU = maximum voltage at ambient temperature tU kI and kII = factors tU kI kII 05-2020, Rev. 0520 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company 20 °C 1.0 1.0 30 °C 1.04 0.93 Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 40 °C 1.07 0.86 50 °C 1.1 0.79 Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions 60 °C 1.15 0.71 70 °C 1.18 0.62 Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 1 General Purpose Relays PCB Relays Reed Relay V23100 -V6 SCHRACK (Continued) Dimensions Terminal Assingment Base terminals Circuit symbols drawn in release condition. If a positive potencial is applied to coil terminal 1, the relay changes to operate condition 1 make 2 makes PCB layout Mounting hole layout View onto the terminal 1 make and break Minimum spacing for version with 1 make and 1 contact Typical product code V23100-V6 002 A101 Type V23100-V6 - Reed relay, V23100-V6 series Coil 004 – 5 VDC 001 – 6 VDC 002 – 12 VDC 003 – 24 VDC Contact arrangement A101 – 1 make A201 – 2 makes A112 – 1 make and 1 break 2 05-2020, Rev. 0520 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change.