13
43
13 AND 43
Standard
SPECIFICATIONS
PC Board Mountable Pressure Sensor
0-100 mV Output
Current Excitation
Gage and Absolute
Temperature Compensated
The 13 and 43 are temperature compensated,
piezoresistive silicon pressure sensors packaged in a TO-8
configuration. It provides excellent performance and long-term
stability.
Gage and absolute pressure ranges from 0-2 to 0-250
psi are available. Integral temperature compensation is provided
over a range of 0-50°C using laser-trimmed resistors. An
additional laser-trimmed resistor is included to normalize
pressure sensitivity variations by programming the gain of an
external differential amplifier. This provides sensitivity
interchangeability of ±1%.
Please refer to the 13 and 43 1 psi datasheets for low
pressure applications.
SENSOR SOLUTIONS ///13 and 43
7/2017
Page 1
13 AND 43
Standard
FEATURES
TO-8 Package
0ºC to 50ºC Compensated
Temperature Range
±0.1% Non Linearity
1.0% Interchangeable Span
(provided by gain set resistor)
Solid State Reliability
APPLICATIONS
Medical Instruments
Process Control
Factory Automation
Altitude Measurement
Vacuum Measurement
Handheld Calibrators
STANDARD RANGES
Range
0 to 2
0 to 5
0 to 10
0 to 15
0 to 30
0 to 50
0 to 100
0 to 250
SENSOR SOLUTIONS ///13 and 43
psig
psia
7/2017
Page 2
13 AND 43
Standard
PERFORMANCE SPECIFICATIONS
Supply Current: 1.5mA
Ambient Temperature: 25°C (unless otherwise specified)
PARAMETERS
MIN
TYP
MAX
UNITS
NOTES
Span
75
100
150
mV
1
Span (2 psi version)
30
60
mV
1
Zero Pressure Output
-2
2
mV
Pressure Non Linearity
-0.1
±0.05
0.1
%Span
Pressure Hysteresis
-0.05
±0.01
0.05
%Span
Input & Output Resistance
2500
4400
6000
Ω
Temperature Error – Span
-0.5
±0.3
0.5
%Span
3
Temperature Error – Zero
-0.5
±0.1
0.5
%Span
3
%Span
3
2
Thermal Hysteresis – Zero
±0.1
Supply Current
1.5
Response Time (10% to 90%)
1.0
mS
Output Noise (10Hz to 1kHz)
1.0
µV p-p
MΩ
5
±0.1
%Span
6
3X
Rated
7
0
50
°C
Operating Temperature
-40
+125
°C
Storage Temperature
-50
+150
°C
3
grams
Insulation Resistance (50 Vdc)
50
Long Term Stability (Offset & Span)
Pressure Overload
Compensated Temperature
2.0
Weight
Solder Temperature
250ºC Max 5 Sec.
Media
Non-Corrosive Dry Gases Compatible with Silicon, Pyrex,
RTV, Gold, Nickel, and Aluminum
mA
4
Notes
1.
Ratiometric to supply current.
2.
Best fit straight line.
Maximum temperature error between 0°C and 50°C with respect to 25°C. For 2psi devices, Temperature Error – Zero is ±1.25%.
3.
4.
For a zero-to-full scale pressure step change.
5.
Minimum resistance between case and pins.
6.
Long term stability over a one year period with constant current and temperature.
7.
2X maximum for 250 psi device. 20 psi maximum for 2 and 5 psi devices.
SENSOR SOLUTIONS ///13 and 43
7/2017
Page 3
13 AND 43
Standard
DIMENSIONS
CONNECTIONS
SENSOR SOLUTIONS ///13 and 43
7/2017
Page 4
13 AND 43
Standard
APPLICATION SCHEMATIC
SENSOR SOLUTIONS ///13 and 43
7/2017
Page 5
13 AND 43
Standard
ORDERING INFORMATION
13A – 030 A
Pressure Range [psi]
Pressure Type
G
Gage
A
Absolute
002 (Gage Only)
005
010
015
030
050
100
250
43A – 030 A
Pressure Range [psi]
Pressure Type
G
Gage
A
Absolute
002 (Gage Only)
005
010
015
030
050
100
250
NORTH AMERICA
EUROPE
ASIA
Measurement Specialties, Inc.,
a TE Connectivity Company
Tel: 800-522-6752
customercare.frmt@te.com
Measurement Specialties (Europe), Ltd.,
a TE Connectivity Company
Tel: 800-440-5100
customercare.bevx@te.com
Measurement Specialties (China), Ltd.,
a TE Connectivity Company
Tel: 0400-820-6015
mailto:customercare.shzn@te.com
TE.com/sensorsolutions
Measurement Specialties, Inc., a TE Connectivity company.
Measurement Specialties, TE Connectivity, TE Connectivity (logo) and EVERY CONNECTION COUNTS are trademarks. All other logos, products and/or company names referred to herein
might be trademarks of their respective owners.
The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes
no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard
Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse
of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application.
© 2015
TE Connectivity Ltd. family of companies
SENSOR SOLUTIONS ///13 and 43
All Rights Reserved.
7/2017
Page 6
很抱歉,暂时无法提供与“13A-030G”相匹配的价格&库存,您可以联系我们找货
免费人工找货