File E66717
SR#5975412-T004
May 09, 1984
REPORT
On
COMPONENT - ELECTRICAL QUICK-CONNECT TERMINALS
TYCO ELECTRONICS CORP
HARRISBURG PA 17111
Copyright 1984 Underwriters Laboratories Inc.
Underwriters Laboratories Inc. authorizes the above named company to
reproduce this Report either in its entirety or the portion of this
Report consisting of the Cover Page up to (but not including) the
Construction Details Descriptive pages.
Created by UL Document Compiler 2020-05-19 18:21:47 +00:00
File E66717
Vol. 4
Vol. 1
Sec. 1
Sec. 19
and Report
Page 1
Issued:
Revised:
1984-05-09
2020-02-18
D E S C R I P T I O N
PRODUCT COVERED:
Component quick-connect connectors for Tabs, Faston Series 110, 187,
205, 250. (For specific part nos. see manufacturer's drawings.)
Component quick-connect tabs, Series .250, cat. nos. contained in
manufacturer's drawings.
USR, CNR - FASTON Quick-Connect Connectors for copper alloy tabs, Series
250, Cat. No. 1217080-1.
GENERAL CHARACTER AND USE:
The products covered are quick-connect connectors intended for factory
assembly on No. 22-10 AWG stranded copper wire using this manufacturer's
power tooling. They are intended for use in equipment where strain relief is
provided. The quick-connect connectors are for use on the following copper
*alloy production tabs, assembled with the specified tooling.
Wire Size (AWG)
No.
No.
No.
No.
No.
No.
No.
10
12
14
16
18
20
22
Number of Strands
105
65
41
26
16
10
7
Part No. 160883 is similar to Part No. 160430, except without slots
provided on the connector end. See Ill. l8 for details.
Series .250 tabs are copper alloy production tabs mounted by integrally
formed pins. They are for use with size .250 quick-connect connectors. See
Ills. 19-25 inclusive for details. Series 250 tabs are for factory-wiring.
Created by UL Document Compiler 2020-05-19 18:21:47 +00:00
File E66717
Vol. 4
Vol. 1
Sec. 1
Sec. 19
and Report
Page 1A
Issued:
Revised:
1984-05-09
2020-02-18
ENGINEERING CONSIDERATIONS (NOT FOR UL REPRESENTATIVE USE):
These devices are for use in equipment where the acceptability of the
combination is determined by Underwriters Laboratories Inc.
Conditions of Acceptability - The following items are to be judged with
respect to specific applications in their end use.
1.
These devices are not to be used for current interruption on
grounding purposes.
2.
These devices are for use where strain relief is provided as part
of the equipment.
3.
These devices are for internal wiring only in electrical equipment.
4.
The mounting suitability of the Series .250 tabs shall be
determined in the end-use equipment.
5.
The mounting suitability of the Cat. No. 1217080-1 shall be
determined in the end-use equipment.
CONSTRUCTION DETAILS:
The details of construction are illustrated in the following catalog
pages and accompanying photographs.
Material – All quick-connect connectors covered by this report may be
constructed with copper alloy, C260 or C274.
Marking - Each connector or tab is marked with the manufacturer's name
or trademark. The smallest unit cartons or reels are marked with:
l.
The manufacturer's name or trademark.
2.
Part No.
3.
Wire sizes (connectors only).
4.
A statement indicating that the connectors are "for use with Cu
wire" or equivalent, (connectors only).
Note: Leading zeros of Part Nos. are optional.
Created by UL Document Compiler 2020-05-19 18:21:47 +00:00
File E66717
Vol. 4
Vol. 1
Sec. 1
Sec. 19
and Report
PART NO. 0-160526-5
Page 2
Issued:
Revised:
FIG. 1
1984-05-09
2020-02-18
(M84-4010)
General - The quick-connectors shown in Fig. 1 are representative of the
connectors Recognized in this report. For specific catalog numbers, wire and
tab sizes, refer to illustrations.
B.L.
J.P.
PART NO. 1217080-1
1.
ILL. 35
Connector Body – Tin plated brass. See ILL. 35 for dimensional details.
Created by UL Document Compiler 2020-05-19 18:21:47 +00:00
File E66717
Vol.4 Sec.1 , Vol.1 Sec.19
Fig 1
Issued: 1984-05-09
Created by UL Document Compiler 2020-05-19 18:21:47 +00:00
File E66717
Vol.4 Sec.1 , Vol.1 Sec.19
Ill 1
Issued: 1984-05-09
Created by UL Document Compiler 2020-05-19 18:21:50 +00:00
File E66717
Vol.4 Sec.1 , Vol.1 Sec.19
Ill 2
Issued: 1984-05-09
Created by UL Document Compiler 2020-05-19 18:21:52 +00:00
File E66717
Vol.4 Sec.1 , Vol.1 Sec.19
Ill 3
Issued: 1984-05-09
Created by UL Document Compiler 2020-05-19 18:21:53 +00:00
File E66717
Vol.4 Sec.1 , Vol.1 Sec.19
Ill 4
Issued: 1984-05-09
Created by UL Document Compiler 2020-05-19 18:21:53 +00:00
File E66717
Vol.4 Sec.1 , Vol.1 Sec.19
Ill 5
Issued: 1984-05-09
Created by UL Document Compiler 2020-05-19 18:21:53 +00:00
File E66717
Vol.4 Sec.1 , Vol.1 Sec.19
Ill 6
Issued: 1984-05-09
Created by UL Document Compiler 2020-05-19 18:21:53 +00:00
File E66717
Vol.4 Sec.1 , Vol.1 Sec.19
Ill 7
Issued: 1984-05-09
Created by UL Document Compiler 2020-05-19 18:21:53 +00:00
File E66717
Vol.4 Sec.1 , Vol.1 Sec.19
Ill 8
Issued: 1984-05-09
Created by UL Document Compiler 2020-05-19 18:21:53 +00:00
File E66717
Vol.4 Sec.1 , Vol.1 Sec.19
Ill 9
Issued: 1984-05-09
Created by UL Document Compiler 2020-05-19 18:21:53 +00:00
File E66717
Vol.4 Sec.1 , Vol.1 Sec.19
Ill 10
Issued: 1984-05-09
Created by UL Document Compiler 2020-05-19 18:21:54 +00:00
File E66717
Vol.4 Sec.1 , Vol.1 Sec.19
Ill 11
Issued: 1984-05-09
Created by UL Document Compiler 2020-05-19 18:21:54 +00:00
File E66717
Vol.4 Sec.1 , Vol.1 Sec.19
Ill 12
Issued: 1984-05-09
Created by UL Document Compiler 2020-05-19 18:21:54 +00:00
File E66717
Vol.4 Sec.1 , Vol.1 Sec.19
Ill 13
Issued: 1984-05-09
Created by UL Document Compiler 2020-05-19 18:21:54 +00:00
File E66717
Vol.4 Sec.1 , Vol.1 Sec.19
Ill 14
Issued: 1984-05-09
Created by UL Document Compiler 2020-05-19 18:21:54 +00:00
File E66717
Vol.4 Sec.1 , Vol.1 Sec.19
Ill 16
Issued: 1984-05-09
Created by UL Document Compiler 2020-05-19 18:21:54 +00:00
File E66717
Vol.4 Sec.1 , Vol.1 Sec.19
Ill 17
Issued: 1984-05-09
Created by UL Document Compiler 2020-05-19 18:21:54 +00:00
File E66717
Vol.4 Sec.1 , Vol.1 Sec.19
Ill 18
Issued: 1984-05-09
Created by UL Document Compiler 2020-05-19 18:21:56 +00:00
File E66717
Vol.4 Sec.1 , Vol.1 Sec.19
Ill 19
Issued: 1984-05-09
Created by UL Document Compiler 2020-05-19 18:21:57 +00:00
File E66717
Vol.4 Sec.1 , Vol.1 Sec.19
Ill 20
Issued: 1984-05-09
Created by UL Document Compiler 2020-05-19 18:22:11 +00:00
File E66717
Vol.4 Sec.1 , Vol.1 Sec.19
Ill 21
Issued: 1984-05-09
Created by UL Document Compiler 2020-05-19 18:22:12 +00:00
File E66717
Vol.4 Sec.1 , Vol.1 Sec.19
Ill 22
Issued: 1984-05-09
Created by UL Document Compiler 2020-05-19 18:22:17 +00:00
File E66717
Vol.4 Sec.1 , Vol.1 Sec.19
Ill 23
Issued: 1984-05-09
Created by UL Document Compiler 2020-05-19 18:22:20 +00:00
File E66717
Vol.4 Sec.1 , Vol.1 Sec.19
Ill 24
Issued: 1984-05-09
Created by UL Document Compiler 2020-05-19 18:22:21 +00:00
File E66717
Vol.4 Sec.1 , Vol.1 Sec.19
Ill 25
Issued: 1984-05-09
Created by UL Document Compiler 2020-05-19 18:22:21 +00:00
File E66717
Vol.4 Sec.1 , Vol.1 Sec.19
Ill 26
Issued: 1984-05-09
Created by UL Document Compiler 2020-05-19 18:22:21 +00:00
File E66717
Vol.4 Sec.1 , Vol.1 Sec.19
Ill 27
Issued: 1984-05-09
Created by UL Document Compiler 2020-05-19 18:22:21 +00:00
File E66717
Vol.4 Sec.1 , Vol.1 Sec.19
Ill 28
Issued: 1984-05-09
Created by UL Document Compiler 2020-05-19 18:22:21 +00:00
File E66717
Vol.4 Sec.1 , Vol.1 Sec.19
Ill 29
Issued: 1984-05-09
Created by UL Document Compiler 2020-05-19 18:22:22 +00:00
File E66717
Vol.4 Sec.1 , Vol.1 Sec.19
Ill 30
Issued: 1984-05-09
Created by UL Document Compiler 2020-05-19 18:22:22 +00:00
File E66717
Vol.4 Sec.1 , Vol.1 Sec.19
Ill 31
Issued: 1984-05-09
Created by UL Document Compiler 2020-05-19 18:22:22 +00:00
File E66717
Vol.4 Sec.1 , Vol.1 Sec.19
Ill 32
Issued: 1984-05-09
Created by UL Document Compiler 2020-05-19 18:22:22 +00:00
File E66717
Vol.4 Sec.1 , Vol.1 Sec.19
Ill 33
Issued: 1984-05-09
Created by UL Document Compiler 2020-05-19 18:22:22 +00:00
File E66717
Vol.4 Sec.1 , Vol.1 Sec.19
Ill 34
Issued: 1984-05-09
Created by UL Document Compiler 2020-05-19 18:22:23 +00:00
File E66717
Vol.4 Sec.1 , Vol.1 Sec.19
Ill 35
Issued: 1984-05-09
Created by UL Document Compiler 2020-05-19 18:22:23 +00:00
