High Speed Backplane Connectors
Table of Contents
MULTIGIG RT Connector
Product Line Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86
Connector Sequencing Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87
Mating Sequencing Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88
Product Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89-91
Customization Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92-94
MULTIGIG RT Tier 1 Connector System . . . . . . . . . . . . . . . . . . . . .95, 96
MULTIGIG RT Tier 2 Connector System . . . . . . . . . . . . . . . . . . . . .97, 98
MULTIGIG RT Tier 3 Connector System . . . . . . . . . . . . . . . . . . . .99, 100
3
VITA 41 Connector Selection Grid . . . . . . . . . . . . . . . . . . . . . . . . . . . .101
MULTIGIG RT Connector
Power Modules and Guide Hardware Reference . . . . . . . . . . . . .102-105
Coming Soon: MULTIGIG RT Connector Future Products . . . . . . . . .106
85
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
MULTIGIG RT Connector Products
Product Facts
■
Customizable impedance
matched printed circuit
wafer interface
■
Inverse sex backplane
connector system with
“pinless” interface
■
Superior crosstalk
performance
■
Optimized footprints for
signal integrity and ease of
board design
■
Utilizes a 0.56 [.022]
diameter via for lower cost
board fabrication
■
Three levels of signal
contact sequencing
■
Available in modular or
monoblock style
■
Available for 20.30 [.800]
or 25.40 [1.00] card pitch
systems
■
Durability rated for 200
cycles
■
Fully compatible with MP
based fiber optic array
interconnects
■
Complete connector family
includes
■ Power Modules = >
Maximize Amps/inch
density, voltages in pairs
■ Guidance Modules
■ Die cast for strength
■ Optional ESD contact
■ Three sequence levels
■ Press fit or hardware
mounted
■ Backplane drill pattern
enabled keying
■ Cable assemblies
proposals available
■
MULTIGIG RT connector
products are fully
compatible with 2mm HM
equipment practices
The MULTIGIG RT product
line is a backplane interconnect family that offers levels
of flexibility and customization never before seen in
the industry. This printed
circuit based, pinless, interconnect family is comprised
of modular components
which can be used in a
variety of combinations.
The connectors in this
innovatively flexible platform can be combined to
provide the density, data
throughput, and signal
integrity required for any
application in today’s computer, military, medical, or
industrial control industries.
The use of printed circuit
wafers in this connector
system allows for cost
effective sequencing and
electrical customization of
the connector. Wafers can
be manufactured specifically for differential or signal
ended performance and
the impedance, propagation delay, and crosstalk of
the connector can be
altered per customer
requirements. This scalable
board to backplane connector family is a robust,
“pinless” design which
eliminates the pin field on
backplane boards and
reduces the end user’s
Applications
Technical Documents
Telecommunications
Equipment
■ Metro Optical Networking
equipment
■ SONET switched platforms
■ Aggregation switches
Application Specifications
114-13062 Power Modules
114-13056 Signal Connectors
■
Midrange Servers
■
High End Servers
Qualification Test Reports
501-538 Power Connectors
501-544 Signal Connectors
■
High speed custom platforms
■
Mass data storage
■
Rugged, mission-critical
applications
■
exposure to field failure in
card cage systems. The
MULTIGIG RT connector
family is designed specifically for 20.30 [.800] or
25.40 [1.00] card pitch
systems.
■
MULTIGIG RT 1 —
141 signals/inch, data
rates up to 3.125 Gb/s
■
MULTIGIG RT 2 —
113 signals/inch, data
rates of 3.125 Gb/s to
6.4 Gb/s and has been
demonstrated to support
10 Gb/s
■
MULTIGIG RT 3 —
85 signals/inch, data
rates above 10 Gb/s
Product Specifications
108-2062 Power Modules
108-2072 Signal Connectors
Engineering Report
502-1130 Power Connectors
Routing Guide RT 2 on
tycoelectronics.com
86
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
MULTIGIG RT Connector Products (Continued)
MULTIGIG RT Connector
Sequencing Chart
20.75 mm
11.25 mm
9.75 mm
8.25 mm
7.5 mm
5.5 mm
4.0 mm
ESD Contact on
Guide Pin
Power Level 3
3
Power Level 2
Power Level 1
MULTIGIG RT Connector
Fully-Mated Wipe Length
18.25 mm
Key on Guide Pin
EMI Shield, proposed
Signal Level 3
Ground Level
Signal Level 2
2.5 mm
Signal Level 1
0
3
6
9
12
15
18
21
87
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
MULTIGIG RT Connector Products (Continued)
MULTIGIG RT Connector
Mating Sequence Chart
which shows the relationship of MULTIGIG RT
Connector products with
other Tyco Electronics
products
Fully Mated
Product
Family
Dim. C
Dim. A
Fully
Mated
HM-Zd
1.50
.059
12.50
.492
HM-Zd
Guide
Hardware
3.00
.118
12.50
.492
HM-2mm
1.50
.059
12.50
.492
MULTIGIG RT
T1
2.50
.098
12.50
.492
MULTIGIG RT
T2
2.25
.089
12.50
.492
MULTIGIG RT
T3
2.25
.089
12.50
.492
MULTIGIG RT
Power
Module
5.50
.217
12.50
.492
MULTIGIG RT
Guide
Hardware
N/A
12.50
.492
HS-3
1.50
.059
12.50
.492
UPM
3.50
.138
12.50
.492
UPM
Guide
Hardware
5.75
.226
12.50
.492
MULTI-BEAM XL
Right Angle
Header to
Vertical
Receptacle
MULTI-BEAM XL
Right Angle
Receptacle
to Vertical
Header
5.08
.200
3.81
.150
14.73
.580
13.21
.520
Reliable Mate
Contact
Ground Shield
Signal Level 2
Signal Level 1
24.0 mm Pin
22.2 mm Pin
Key Blocking Point
Signal Level 3
Signal Level 2
Signal Level 1
Ground
Signal Level 3
Signal Level 2
Signal Level 1
Ground
Signal Level 3
Signal Level 2
Signal Level 1
Ground
Signal Level 1
Power Level 3
Power Level 2
Power Level 1
Dim B.
Reliable
First Mate
Mate
Last Break
16.78 [.661]
17.55 [.691]
15.41 [.607]
15.85 [.624]
13.91 [.548]
14.35 [.565]
27.50 [1.083]
33.40 [1.315]
25.70 [1.012]
31.60 [1.244]
N/A
22.03 [.867]
18.27 [.719]
18.84 [.742]
16.77 [.660]
17.34 [.683]
15.27 [.601]
15.84 [.624]
18.00 [.709]
—
18.00 [.709]
—
16.50 [.650]
—
15.00 [.591]
—
18.00 [.709]
—
18.00 [.709]
—
16.50 [.650]
—
15.00 [.591]
—
16.50 [.650]
—
15.00 [.591]
—
23.75 [.935]
—
22.25 [.876]
—
20.75 [.817]
—
Fully Mated
Wipe Length
4.28 [.169]
2.91 [.115]
1.41 [.056]
N/A
N/A
N/A
5.77 [.227]
4.27 [.168]
2.77 [.109]
5.50 [.217]
5.50 [.217]
4.00 [.157]
2.50 [.098]
5.50 [.217]
5.50 [.217]
4.00 [.157]
2.50 [.098]
4.00 [.157]
2.50 [.098]
11.25 [.443]
9.75 [.384]
8.25 [.325]
Guide Pin Key
33.25 [1.309]
N/A
20.75 [.817]
Guide ESD Contact
30.75 [1.211]
—
18.25 [.719]
Ground
Signal Level 2
Signal Level 1
Power Level 3
Power Level 2
Power Level 1
Guide Pin Key
Keyed Guide Pin
Keyed Guide Pin
PreMate Power —
Level 1
PostMate Power —
Level 2
PreMate Signal —
Level 2
PostMate Signal —
Level 3
PreMate Power —
Level 1
PostMate Power —
Level 2
PreMate Signal —
Level 2
PostMate Signal —
Level 3
17.08 [.672]
16.05 [.632]
14.55 [.573]
20.25 [.797]
18.65 [.734]
17.03 [.670]
31.39 [1.236]
31.39 [1.236]
35.23 [1.387]
17.60 [.693]
16.47 [.648]
14.97 [.589]
20.95 [.825]
19.35 [.762]
17.73 [.698]
36.16 [1.424]
36.16 [1.424]
40.00 [1.575]
—
16.84 [.663]
—
17.81 [.701]
—
18.26 [.719]
—
19.53 [.769]
—
15.32 [.603]
—
16.28 [.641]
—
16.74 [.659]
—
18.01 [.709]
4.78 [.188]
3.75 [.148]
2.25 [.089]
8.10 [.319]
6.50 [.256]
4.88 [.192]
N/A
N/A
N/A
5.61 [.221]
Min.
4.34 [.171]
Min.
3.81 [.150]
Min.
2.54 [.100]
Min.
5.61 [.221]
Min.
4.34 [.171]
Min.
3.81 [.150]
Min.
2.54 [.100]
Min.
88
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
MULTIGIG RT Connector Products (Continued)
Product Selection Guide
accommodate special
applications used by the
VMEbus International Trade
Association (VITA). The
signal contacts, along with
the ground contacts (in Tier
1 modules only) and ESD
contacts (if using the 10.80
[.425] guide assembly
with ESD contact) provide
sequencing for each group
of modules.
The modules are capable
of being stacked in any
configuration within the limitations given in this catalog
to a maximum length of 120
between guide assemblies.
These connectors perform
at two separate density
levels: Tier 1 and Tier 2.
The connectors are placed
on the pc board by
manually-operated or
automatic machines.
When corresponding with
personnel, use the terminology provided to facilitate
your inquiries for information.
Basic terms and features
of this product are provided
in the art below and on the
following page.
The modules have 6, 8, or
10 rows of signal contacts
with 20.30 [.800], 25.40
[1.000], or 30.50 [1.201]
centerline spacing (profile
size). A right angle plug
module having 7 rows with
20.30 [.800] spacing is also
available for Tier 2 only to
3
MULTIGIG RT Connector
MULTIGIG RT connectors
consist of interlocking left
end and right end signal
modules (half or full), center
signal modules, and stand
alone modules available in
vertical receptacles (backplane application) and right
angle plugs (daughtercard
application), and complementary mechanical guide
assemblies (available in size
10.80 [.425] or 7.20 [.283].
The guide assembly
provides blind mating and
misalignment for the connectors. The 10.80 [.425]
guide assembly also
provides keying and is
available with or without
an internal contact for
electrostatic discharge
(ESD) protection.
Vertical Receptacle
(Backplane) Connector
Half
Left End Module
Center Module
Standoff
Half
Right End Module
Housing
Standoff
Standoff
Ground Contact
(In Tier 1 Only)
Polarization Post
Polarization Post
Polarization Slot
Polarization Slot
Eye-of-Needle
Compliant Pin
Signal Contact
Polarization Rib
Standoff
Contact Cavities
Full
Left End Module
Stand Alone
Module
Full
Right End Module
10.8 mm
Guide Pins
Mounting Post
With Screw Hole
Mounting Post
With Threads
7.2 mm
Guide Pin
Mounting
Post
Collar
Key
No Key
89
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
MULTIGIG RT Connector Products (Continued)
Product Selection Guide
(Continued)
Right Angle Plug
(Daughtercard) Connector
Half
Left End Module
Center Module
Half
Right End Module
PC Wafers (Blades)
Housing
Contact
Pads
Eye-of-Needle
Compliant Pin
Signal Contact
Alignment Pin
Full
Left End Module
Stand Alone
Module
Full
Right End Module
10.8 mm
Guide Module
7.2 mm
Guide Module
ESD Contact
(Inside Module)
(Optional)
Housing
No Key
Pilot Post
Key
Screw Hole
Mounting Post
Signal Modules
Tier 1 and Tier 2 receptacles contain eye-of-needle
compliant pin signal contacts; the Tier 1 receptacle
also contains ground contacts. Each housing features standoffs for thermal
venting, polarization ribs
(on end modules) and
polarization slots (on the
center module) for proper
stacking of the modules,
and polarization posts to
ensure correct orientation
on the pc board.
Plugs contain eye-of-needle
compliant pin signal
contacts and pc wafers
(blades). The housing
features alignment pins to
ensure correct orientation
on the pc board.
Guide Assemblies
The guide assembly
consists of a guide pin
(used with receptacles)
and a guide module (used
with plugs).
The guide pin features a
collar and mounting post
(having a screw hole or
threads) with or without a
key. The guide pins are
available with various length
mounting posts. The mounting post is used with customer supplied hardware to
attach the guide pin to the
pc board. Guide pins must
be chosen according to
thickness of pc board being
used; otherwise, interference with proper mating or
damage to system components will occur. Guide pins
with keys are available in
various keying positions.
The guide module features
a housing with or without a
key and with a screw hole,
mounting post, and pilot
post. The mounting post
and pilot post are used to
position the guide module
on the pc board, and the
screw hole is used with
customer supplied hardware to attach the module
to the pc board. The 10.80
[.425] guide module is
available with or without an
ESD contact located inside
the module.
90
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
MULTIGIG RT Connector Products (Continued)
Product Selection Guide
(Continued)
Possible Module
Configurations Used with
Power Modules
Three Signal Modules and One Power Module
Receptacle
Full Left End Module*
Receptacle
Center Module
Receptacle
Full Right End Module*
Guide
Module
Plug
Full Left End Module*
Plug
Center Module
Plug
Full Right End Module*
Power
Receptacle
Module
Power
Plug
Module
Guide
Pin
3
Guide
Module
MULTIGIG RT Connector
Guide
Pin
Two and One-Half Signal Modules and One Power Module
Power
Receptacle
Module
Power
Plug
Module
Guide
Pin
Receptacle
Left End Module
Receptacle
Center Module
Receptacle
Full Right End Module*
Guide
Pin
Guide
Module
Plug
Left End Module
Plug
Center Module
Plug
Full Right End Module*
Guide
Module
Four Signal Modules with One Power Module
Guide
Pin
Receptacle
Full Left End Module*
Receptacle
Center Module
Receptacle
Center Module
Receptacle
Full Right End Module*
Guide
Pin
Guide
Module
Plug
Full Left End Module*
Plug
Center Module
Plug
Center Module
Plug
Full Right End Module*
Guide
Module
Power
Receptacle
Module
Power
Plug
Module
* A Half Left End Module and a Half
Right End Module can be used
instead.
91
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
MULTIGIG RT Connector Products (Continued)
Customization Options
The MULTIGIG RT Product
Line is fully customizable.
This is accomplished by
means of stacking the PCB
wafers in the correct location to achieve the desired
mix of High Speed
Differential, High Speed
Single-ended, and low
speed/high speed density
signals. In addition, power
can be carried through the
PCB wafers by replacing
one or more signal wafers
for a power wafer.
Shown below is a
Tyco Electronics proposal
for a typical MULTIGIG RT
Connector application.
As you can see, we took
full advantage of the
MULTIGIG RT Connector
capabilities. Contact your
Tyco Electronics representative to have a proposal
drawn-up to meet your
specific needs.
Typical MULTIGIG RT
Connector Implementation
MULTIGIG RT
7.2mm Guide
Receptacle
MULTIGIG RT 2
20.3mm Center Plug
16 Differential Pair Wafers
(3 Pairs Each)
MULTIGIG RT 2
20.3mm Center Plug
16 Open Pin Field Wafers
(9 Single-ended Lines Each)
MULTIGIG RT 2
20.3mm Right End Plug
3 Open Pin Field Wafers (9 Single-ended Lines Each)
8 Single-ended Wafers (6 Lines Each)
2 Power Wafers (3 Lines Each)
MULTIGIG RT 2
20.3mm Right End Plug
16 Open Pin Field Wafers
(9 Single-ended Lines Each)
92
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
MULTIGIG RT Connector Products (Continued)
Customization Options
(Continued)
Tier 1 Options
The Tier 1 connector system can be customized
with Differential and Singleended wafers. In addition, a
power wafer is available for
the 25.40 [1.000] pitch
product that provides 4
power lines and 2 sense
lines per wafer. Shown
below are differential, single-ended and power
options.
3
MULTIGIG RT Connector
93
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
MULTIGIG RT Connector Products (Continued)
Customization Options
(Continued)
Tier 2 and Tier 3 Options
The Tier 2 and Tier 3
connector system is fully
customizable due to the
lack of a bussed ground
system. This allows us to
stack the many options
available (with more being
Signal Options Available:
0.8" Shown
Differential Wafers
developed as needed) in
any configuration that is
necessary to meet the customers needs. Shown here
are some of the options that
are currently available.
Single-ended w/ 1:1 S/G Ratio
Single-ended w/ 2:1 S/G Ratio
Open Pin Field
(No Reference Ground)
Mixed, Differential and S/E Lines
Custom, Vita 41, Mixed
Up to 4 Power Lines/Wafer
Total of 19 AMPS/Wafer
94
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
MULTIGIG RT Tier 1 Connector System
Target Applications
■
High speed telecommunications equipment
■
Midrange and high-end
servers
■
Networking equipment
■
Blindmate design
■
High speed custom
platforms
■
Mass data storage
■
Rugged, mission-critical
applications
3
Product Features
Excellent performance to
3.125 Gb/s
■
High density: 140 contacts
per inch provides 70 contact
pairs per inch for
differential signaling
■
Options include 20.32
[.800] and 25.40 [1.000]
pitch card spacing
■
Modular options for signal,
power, keying and guidance
■
Optimized footprints
■
Robust design
■
Low noise levels
■
Supports differential pair
widths of 6 mils with 9 mil
spacings
■
Single-ended option
available; contact
Tyco Electronics for
performance data
The MULTIGIG RT Tier 1
connector meets customer
requirements for high-density
and high-performance
two-piece interconnects.
In Tyco Electronics and
independent lab tests,
the MULTIGIG RT Tier 1
connector has performed
in excess of 3 Gb/s using
standard FR-4 board material and routing techniques.
The MULTIGIG RT Tier 1
connector is a differential
connector with a contact
density of 70 pairs per inch.
The robust connector uses
daughtercard plugs with a
printed circuit board (PCB)
wafer design and backplane receptacles with a
completely enclosed dualbeam design. All signal
lines use redundant points
of contact for high reliability.
The MULTIGIG RT Tier 1
connector is available for
both 20.32 [.800] and 25.40
[1.000] pitch card spacing.
The totally modular system
allows flexibility in choosing
signal and power modules
as well as guidance, keying, and electrostatic discharge (ESD) modules to
meet the most demanding
MULTIGIG RT Connector
■
applications. Signal modules can be customized for
specific electrical requirements—such as sequencing—that are critical in high
speed applications.
Power modules are available
with two- and four-voltage
options, each circuit capable of carrying 15 amps.
The robust metal guide pin
provides eight keying
options and a unique ESD
contact to discharge static
when daughtercards are
hot-plugged.
Availability
Fully validated SPICE models: E-mail requests to modeling@tycoelectronics.com
Pro/E models and IGES models: E-mail requests to TycoCAD@tycoelectronics.com
www.tycoelectronics.com
95
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
MULTIGIG RT Tier 1 Connector System (Continued)
Mechanical Design
Summary
Mechanical Features
■
Extremely rugged connector
for mission critical
applications
■
Three signal sequencing
levels plus an additional
three power sequencing
levels
■
Keyed guide modules
standard: cannot mate
connector incorrectly, and
provide ± 3 mm of gather
■
Options available include:
■ Power modules
■ Electrostatic discharge
guide pins
■ Multiple guide pin keying
options
■
20.30 [.800] Pitch Connector
25.40 [1.00] Pitch Connector
No. of Signal
Part
Type
Style
Cols. Pattern Number
Center
16
N/A 1410200-1
Stand Alone 16
N/A 1410420-1
(Backplane)
Half Left
8
N/A 1410226-1
Receptacle
Half Right
8
N/A 1410227-1
Full Left
16
N/A 1410201-1
Full Right
16
N/A 1410202-1
16
S.E. 1410205-1
Center
16
Diff. 1410205-2
16
S.E. 1410421-1
Stand Alone
16
Diff. 1410421-2
8
S.E. 1410228-1
Half Left
(Daughtercard)
8
Diff. 1410228-2
Plug
8
S.E. 1410229-1
Half Right
8
Diff. 1410229-2
16
S.E. 1410206-1
Full Left
16
Diff. 1410206-2
16
S.E. 1410207-1
Full Right
16
Diff. 1410207-2
No. of Signal
Part
Cols. Pattern Number
Center
16
N/A 1410210-1
Stand Alone 16
N/A 1410412-1
(Backplane)
Half Left
8
N/A 1410231-1
Receptacle
Half Right
8
N/A 1410230-1
Full Left
16
N/A 1410211-1
Full Right
16
N/A 1410212-1
16
S.E. 1410215-1
Center
16
Diff. 1410215-2
16
S.E. 1410413-1
Stand Alone
16
Diff. 1410413-2
8
S.E. 1410232-1
Half Left
(Daughtercard)
8
Diff. 1410232-2
Plug
8
S.E. 1410233-1
Half Right
8
Diff. 1410233-2
16
S.E. 1410216-1
Full Left
16
Diff. 1410216-2
16
S.E. 1410217-1
Full Right
16
Diff. 1410217-2
Type
Style
The drawings below show the nominal dimensions for the MULTIGIG RT 1 connector modules
High signal density: 70 pairs
for differential signals
Dim.
A
B
C
D
E
F
20.32 [.800]
Connector
16.10
.630
21.60
.850
18.40
.720
28.70
1.130
21.60
.850
18.40
.720
25.40 [1.000]
Connector
16.10
.630
27.40
1.080
24.20
.950
28.70
1.130
27.40
1.080
24.20
.950
Dim.
AA
20.32 [.800]
Connector
R = 17.00
.067
L = 15.20
.600
25.40 [1.000]
Connector
R = 17.00
.067
L = 15.20
.600
10.50
.410
18.60
.730
28.70
1.130
10.50
.410
18.60
.730
10.50
.410
24.40
.960
28.70
1.130
10.50
.410
24.40
.960
BB
CC
DD
EE
FF
Left/Right End Module
Left Full End Module
Right Full End Module
Stand Alone Backplane
Stand Alone Daughtercard
Center Module
C
F
B
E
D
A
Plug (Daughtercard)
CC
FF
BB
AA
DD
Receptacle (Backplane)
EE
96
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
MULTIGIG RT Tier 2 Connector System
Target Applications
■
High speed telecommunications equipment
■
Midrange and high-end
servers
■
Networking equipment
■
Blindmate design
■
High speed custom
platforms
■
Mass data storage
■
Rugged, mission-critical
applications
3
Product Features
Excellent performance to
6.25+ Gb/s–
■
High density: 113 contacts
per inch provides 56 contact
pairs per inch for
differential signaling
■
Options include 20.32
[.800] and 25.40 [1.000]
pitch card spacing
■
Modular options for signal,
power, keying and guidance
■
Optimized footprints
■
Robust design
■
Low noise levels
■
Supports differential pair
widths of 6 mils with 9 mil
spacings
■
Single-ended, open pin
field and power wafers
available
The MULTIGIG RT Tier 2
connector is the latest
product release to meet
customer requirements for
high-density and highperformance two-piece
interconnects. In
Tyco Electronics and
independent lab tests,
the MULTIGIG RT Tier 2
connector has performed
in excess of 6 Gb/s using
standard FR-4 board material and routing techniques,
and has been demonstrated to 10 Gb/s.
The MULTIGIG RT Tier 2
connector system provides
the flexibility to configure
the daughtercard for
Differential, Single-ended,
Open Pin Field, or Power
within a single connector
module. All of these options
then mate into a common
Backplane Receptacle. The
robust connector uses
daughtercard plugs with a
printed circuit board (PCB)
wafer design and backplane receptacles with a
completely enclosed dualbeam design. All signal
lines use redundant points
of contact for high reliability.
The MULTIGIG RT Tier 2
connector is available for
both 20.32 [.800] and 25.40
[1.000] pitch card spacing.
The totally modular system
allows flexibility in choosing
signal and power modules
MULTIGIG RT Connector
■
as well as guidance, keying, and electrostatic discharge (ESD) modules to
meet the most demanding
applications. Signal modules can be customized for
specific electrical requirements—such as sequencing—that are critical in high
speed applications.
Power modules are available
with two- and four-voltage
options, each circuit capable of carrying 15 amps.
The robust metal guide pin
provides eight keying
options and a unique ESD
contact to discharge static
when daughtercards are
hot-plugged.
Availability
Fully validated SPICE models: E-mail requests to modeling@tycoelectronics.com
Pro/E models and IGES models: E-mail requests to TycoCAD@tycoelectronics.com
www.tycoelectronics.com
97
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
MULTIGIG RT Tier 2 Connector System (Continued)
Mechanical Design
Summary
20.30 [.800] Pitch Connector
25.40 [1.00] Pitch Connector
No. of Signal
Part
Type
Style
Cols. Pattern Number
Center
16
N/A 1410140-1
Stand Alone 16
N/A 1410133-1
Half Left
8
N/A 1410186-1
(Backplane)
Half
Right
8
N/A
*
Receptacle
Full Left
16
N/A 1410141-1
Full Right
16
N/A 1410142-1
Right End
18
N/A 1410456-1
16
S.E.
*
Center
16
Diff. 1410137-1
16
S.E.
*
Stand Alone
16
Diff. 1410134-1
8
S.E.
*
Half Left
8
Diff.
*
(Daughtercard)
Plug
8
S.E.
*
Half Right
8
Diff.
*
16
S.E.
*
Full Left
16
Diff. 1410138-1
16
S.E.
*
Full Right
16
Diff. 1410139-1
No. of Signal
Part
Cols. Pattern Number
Center
16
N/A 1410127-1
Stand Alone 16
N/A 1410131-1
Half Left
8
N/A
*
(Backplane)
Receptacle
Half Right
8
N/A
*
Full Left
16
N/A 1410129-1
Full Right
16
N/A 1410128-1
16
S.E.
*
Center
16
Diff. 1410123-1
16
S.E.
*
Stand Alone
16
Diff. 1410132-1
8
S.E.
*
Half Left
8
Diff.
*
(Daughtercard)
Plug
8
S.E.
*
Half Right
8
Diff.
*
16
S.E.
*
Full Left
16
Diff. 1410124-1
16
S.E.
*
Full Right
16
Diff. 1410125-1
Type
Style
* Contact Tyco Electronics.
* Contact Tyco Electronics
The drawings below show the nominal dimensions for the MULTIGIG RT 2 connector modules
Dim.
A
B
C
D
E
F
20.32 [.800]
Connector
16.10
.630
21.60
.850
18.40
.720
28.70
1.130
21.60
.850
18.40
.720
25.40 [1.000]
Connector
16.10
.630
27.40
1.080
24.20
.950
28.70
1.130
27.40
1.080
24.20
.950
Dim.
AA
20.32 [.800]
Connector
R = 17.00
.067
L = 15.20
.600
25.40 [1.000]
Connector
R = 17.00
.067
L = 15.20
.600
10.50
.410
18.60
.730
28.70
1.130
10.50
.410
18.60
.730
10.50
.410
24.40
.960
28.70
1.130
10.50
.410
24.40
.960
BB
CC
DD
EE
FF
Left/Right End Module
Left Full End Module
Right Full End Module
Stand Alone Backplane
Stand Alone Daughtercard
Center Module
C
F
B
E
D
A
Plug (Daughtercard)
CC
FF
BB
AA
DD
Receptacle (Backplane)
EE
98
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
MULTIGIG RT Tier 3 Connector System
Target Applications
■
High speed telecommunications equipment
■
Midrange and high-end
servers
■
Networking equipment
■
Blindmate design
■
High speed custom
platforms
■
Mass data storage
■
Rugged, mission-critical
applications
3
Product Features
Excellent performance to
10+ Gb/s
■
High density: 85 contacts
per inch provides 42 contact
pairs per inch for
differential signaling
■
Options include 20.32
[.800] and 25.40 [1.000]
pitch card spacing
■
Modular options for signal,
power, keying and guidance
■
Optimized footprints
■
Robust design
■
Low noise levels
■
Supports differential pair
widths of 6 mils with 9 mil
spacings
■
Single-ended, open pin
field and power wafers
available
■
Supports Quad routing
■
MULTIGIG RT 3 products
are on 2.4mm column
spacing
The MULTIGIG RT Tier 3
connector is the latest
product release to meet
customer requirements for
high-density and highperformance two-piece
interconnects. In
Tyco Electronics and
independent lab tests,
the MULTIGIG RT Tier 3
connector has performed
in excess of 10 Gb/s using
standard FR-4 board material and routing techniques,
and has been demonstrated to 10 Gb/s.
The MULTIGIG RT Tier 3
connector system provides
the flexibility to configure
the daughtercard for
Differential, Single-ended,
Open Pin Field, or Power
within a single connector
module. All of these options
then mate into a common
Backplane Receptacle. The
robust connector uses
daughtercard plugs with a
printed circuit board (PCB)
wafer design and backplane receptacles with a
completely enclosed dualbeam design. All signal
lines use redundant points
of contact for high reliability.
The MULTIGIG RT Tier 3
connector is available for
both 20.32 [.800] and 25.40
[1.000] pitch card spacing.
The totally modular system
allows flexibility in choosing
signal and power modules
MULTIGIG RT Connector
■
as well as guidance, keying, and electrostatic discharge (ESD) modules to
meet the most demanding
applications. Signal modules can be customized for
specific electrical requirements—such as sequencing—that are critical in high
speed applications.
Power modules are available
with two- and four-voltage
options, each circuit capable of carrying 15 amps.
The robust metal guide pin
provides eight keying
options and a unique ESD
contact to discharge static
when daughtercards are
hot-plugged.
Availability
Fully validated SPICE models: E-mail requests to modeling@tycoelectronics.com
Pro/E models and IGES models: E-mail requests to TycoCAD@tycoelectronics.com
www.tycoelectronics.com
99
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
MULTIGIG RT Tier 3 Connector System (Continued)
Mechanical Design
Summary
20.30 [.800] Pitch Connector
Type
Style
(Backplane)
Receptacle
Center
Full Right
Center
(Daughtercard)
Plug
Full Right
25.40 [1.00] Pitch Connector
No. of Signal
Part
Cols. Pattern Number
16
N/A 1410000-1
16
N/A 1410001-1
16
S.E.
*
16
Diff. 1410005-1
16
S.E.
*
16
Diff. 1410003-1
* Contact Tyco Electronics.
Type
Style
(Backplane)
Receptacle
Center
Full Right
Center
(Daughtercard)
Plug
Full Right
No. of Signal
Part
Cols. Pattern Number
16
N/A 1410006-1
16
N/A 1410018-1
16
S.E.
*
16
Diff. 1410009-1
16
S.E.
*
16
Diff. 1410024-1
* Contact Tyco Electronics.
The drawings below show the nominal dimensions for the MULTIGIG RT 3 connector modules
Dim.
A
B
C
D
E
F
20.32 [.800]
Connector
16.10
.630
21.60
.850
18.40
.720
28.70
1.130
21.60
.850
18.40
.720
25.40 [1.000]
Connector
16.10
.630
27.40
1.080
24.20
.950
28.70
1.130
27.40
1.080
24.20
.950
Dim.
AA
BB
CC
DD
EE
FF
Left/Right End Module
25.40 [1.000]
Connector
R = 17.00
.067
L = 15.20
.600
10.50
.410
24.40
.960
28.70
1.130
10.50
.410
24.40
.960
Left Full End Module
Right Full End Module
Stand Alone Backplane
Stand Alone Daughtercard
Center Module
C
20.32 [.800]
Connector
R = 17.00
.067
L = 15.20
.600
10.50
.410
18.60
.730
28.70
1.130
10.50
.410
18.60
.730
F
B
E
D
A
Plug (Daughtercard)
CC
FF
BB
AA
DD
Receptacle (Backplane)
EE
100
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
VITA 41 Connector Selection Grid
Actual VITA 41,
12 Slot Backplane
VITA 41, referred to as VXS,
is the next Generation of
VME Backplanes
3
MULTIGIG RT Connector
Connector
Description
Part Number
P0
Tier 2, 7 Row, Center Module,
20.30 [.800] Pitch, Right Angle
Tier 2, Left End Module,
20.30 [.800] Pitch, Right Angle
Tier 2, Center Module,
20.30 [.800] Pitch, Right Angle
Tier 2, Center Module,
20.30 [.800] Pitch, Right Angle
Tier 2, Right End Module,
20.30 [.800] Pitch, Right Angle
Tier 1, Monolithic,
20.30 [.800] Pitch, Right Angle
Tier 2, Center Module,
20.30 [.800] Pitch, Vertical
Tier 2, Left End Module,
20.30 [.800] Pitch, Vertical
Tier 2, Center Module,
20.30 [.800] Pitch, Vertical
Tier 2, Center Module,
20.30 [.800] Pitch, Vertical
Tier 2, Right End Module,
20.30 [.800] Pitch, Vertical
Tier 1, Monolithic Module,
20.30 [.800] Pitch, Vertical
1410147-1
P5
P4
P3
P2
P1
J0
J5
J4
J3
J2
J1
1410138-1
1410137-1
1410137-1
1410139-1
1410421-1
1410135-1
1410141-1
1410140-1
1410140-1
1410142-1
1410420-1
101
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
Power Modules and Guide Hardware Reference
Part Number 1410278-1
13.70
Ref.
[.539]
Mating Point
Y
2-Position Vertical
Receptacle
3.50
Ref.
[.138]
3.60
Typ.
[.142]
Contact
8.45
[.338]
Housing
3.18
[.125]
16.25
[.640]
Y
Section Y-Y
3.00
[.118]
Daughter Card
Primary Side
2.00 4 Plcs.
[.079]
1
Pin 1a
Plated
Through Hole
12 Plcs.
Connector
Outline
Mating Header
Footprint
Center Lines
3.60
[.142]
0.75
[.030]
2 Plcs.
2.00
[.079]
Typ.
3.00
[.118]
1.625
[.064]
Recommended PCB Hole Layout
15.25
[.600]
Part Number 1410270-1
1
Y
13.70
Ref.
[.539]
Mating Point
4-Position Vertical
Receptacle
PCB Hole Dim.
Drilled Hole = 0.70 ± 0.02 [.028 ± .001]
Finished Hole = 0.60 ± 0.05 [.024 ± .002]
Cu Thickness = 0.025 – 0.50 [.0010 – .020]
SnPb Thickness = 0.015 [.0006] Max.
3.50
Ref.
[.138]
Contact
3.60
Typ.
[.142]
15.65
[.616]
Housing
3.18
[.125]
16.25
[.640]
Y
Section Y-Y
3.00
[.118]
Daughter Card
Primary Side
Pin 1a
1
Plated
Through Hole
24 Plcs.
2.00 4 Plcs.
[.079]
Connector
Outline
Mating Header
Footprint
Center Lines
2.00
[.079]
Typ.
3.00
[.118]
1.625
[.064]
3.60
3 Plcs.
[.142]
0.75
[.030]
4 Plcs.
Recommended PCB Hole Layout
15.25
[.600]
1
PCB Hole Dim.
Drilled Hole = 0.70 ± 0.02 [.028 ± .001]
Finished Hole = 0.60 ± 0.05 [.024 ± .002]
Cu Thickness = 0.025 – 0.50 [.0010 – .020]
SnPb Thickness = 0.015 [.0006] Max.
102
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
Power Modules and Guide Hardware Reference (Continued)
Part Number 1410279-X
Y
L
Contact
Housing
1
2
2-Position Right Angle Plug
18.40
[.724]
5.50
[.217]
Ref.
6.00
Ref.
[.236]
17.75
[.699]
Y
10.60
[.417]
14.70
[.579]
Daughtercard
Edge
2.00
[.079]
Typ.
3.50
Ref.
[.138]
1
33.38
[1.314]
Section Y-Y
Part
Number
2.00 5 Plcs.
[.079]
5.50
[.217]
1410279-1
Connector
Outline
1410279-2
PCB Hole Dim.
Drilled Hole = 0.70 ± 0.02
[.028 ± .001]
Finished Hole = 0.60 ± 0.05
[.024 ± .002]
Cu Thickness = 0.025 – 0.5
[.0010 – .020]
SnPb Thickness =
0.015 [.0006] Max.
Pin 1a
3
MULTIGIG RT Connector
Dim. L
Circuit 1
Circuit 2
13.75
13.75
.541
.541
13.75
12.25
.541
.482
13.75
10.75
.541
.423
10.75
10.75
. 423
.423
12.25
10.75
.482
.423
12.25
12.25
.482
.482
3.60
Typ.
[.142]
Primary Side
of Backplane
1410279-3
1410279-4
1
Plated
Through Hole
12 Plcs.
3.60
3 Plcs.
[.142]
1410279-5
1410279-6
18.00
Ref.
[.709]
Recommended PCB Hole Layout
Part Number 1410271-X
Y
L
Contact
Housing
1
2
3
4
4-Position Right Angle Plug
18.40
[.724]
5.50
[.217]
Ref.
6.00
Ref.
[.236]
17.75
[.699]
Y
17.80
[.701]
14.70
[.579]
Daughtercard
Edge
2.00
[.079]
Typ.
33.38
[1.314]
Cavity 1
13.75
.541
12.25
.482
12.25
.482
10.75
. 423
12.25
.482
12.25
.482
10.75
. 423
10.75
. 423
10.75
. 423
12.25
.482
Dim. L
Cavity 2
Cavity 3
13.75
13.75
.541
.541
13.75
13.75
.541
.541
13.75
13.75
.541
.541
13.75
13.75
.541
.541
13.75
12.25
.541
.482
12.25
12.25
.482
.482
12.25
12.25
.482
.482
10.75
10.75
. 423
. 423
13.75
12.25
.541
.482
10.75
10.75
. 423
.541
Cavity 4
13.75
.541
12.25
.482
10.75
.423
10.75
.423
10.75
.423
12.25
.482
10.75
.423
10.75
.423
10.75
.423
12.25
.482
Part
Number
Section Y-Y
1410271-1
2.00 5 Plcs.
[.079]
1410271-2
1410271-3
Connector
Outline
3.50
Ref.
[.138]
3.60
Typ.
[.142]
PCB Hole Dim.
Drilled Hole = 0.70 ± 0.02
[.028 ± .001]
Finished Hole = 0.60 ± 0.05
[.024 ± .002]
Cu Thickness = 0.025 – 0.50
[.0010 – .020]
SnPb Thickness =
0.015 [.0006] Max.
5.50
[.217]
1
Pin 1a
1410271-4
1410271-5
1
Plated
Through Hole
24 Plcs.
1410271-6
1410271-7
3.60
3 Plcs.
[.142]
Primary Side
of Backplane
1410271-8
18.00
Ref.
[.709]
1410271-9
1-1410271-0
Recommended PCB Hole Layout
103
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
Power Modules and Guide Hardware Reference (Continued)
7.2 mm Wide, No Key
7.08
[.279]
A
4.10 Across
[.161] Flats
7.40
[.291]
1.85
[.073]
25.33
[.997]
31.88
[1.255]
30°0'
Ref.
7.10
[.280]
18.40
[.724]
18.60
[.732]
-Z-
CL of - Z -
8.35
[.329]
3.70
[.146]
7.30
[.287]
10.50
[.413]
Pin Part Number 1410710-X
Dim. A
8.72
.343
10.00
.394
11.60
.457
13.10
.516
4.00
[.157]
15.63
[.615]
3.88
[.153]
Part Number
1410710-1
Guide Module Part Number 1410714-2
1410710-2
1410710-3
1410710-4
9.0 mm Wide, with Keying
Measured
Counterclockwise
7.40
[.291]
A
5.50
[.217]
9.78
Max.
[.385]
12.48
[.491]
5.00
[.197]
1.50 ± 0.03
[.059 ± .001]
9.00
[.354
+ 0.05
– 0.13
+ .002
– .005 ]
Ø 9.00
[.354]
G
ESD Orientation
2.70 ± 0.08
[.106 ± .003]
Ø 3.00 ± 0.05
[.118 ± .002]
2.00
[.079]
5.50
[.217]
24.00
[.945]
22.75
[.896]
5.25
[.207]
2.70
[.106]
1.30 ± 0.10
[.051 ± .004]
5.50
[.217]
Ø 4.65 ± 0.05
2 Plcs.
[.183 ± .002]
Edge of
Daughtercard
Pin Part Number 1469491-X
Dim. G
2.60
.102
4.20
.165
5.70
.224
Mounting Screw for 9.0 mm
Guide Modules
4.75
[.187]
Part Number
1469491-2
Guide Module Part Number 1469492-X
1469491-3
1469491-4
Ø 5.50
[.217]
1.50
[.059]
0.50 Max.
[.020]
12.50
Top of
[.492]
Motherboard
Dim. A
0°
45°
90°
270°
315°
No Key
Part Number
1469492-1
1469492-2
1469492-3
1469492-7
1469492-8
1469492-9
3.50
[.138]
Part Number 1410946-1
104
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
Power Modules and Guide Hardware Reference (Continued)
10.8 mm Wide, Guide Module, with Keying, with ESD Contact
Measured
Counterclockwise
Contact, ESD
A
Housing
6.00
[.236]
18.40
[.724]
5.00
[.197]
4.00
[.157]
2 Plcs.
Ø 7.70
[.303]
3.70
[.146]
ESD Orientation
31.88
[1.255]
Ø 3.96 ± 0.05 2 Plcs.
[.156 ± .002]
Ø 3.96 ± 0.05
[.156 ± .002]
5.50
[.217]
16.13
[.635]
12.25
Ref.
[.482]
5.63
Ref.
[.222]
5.63
[.222] 5.00 12.25
[.482]
[.197]
10.70
[.421]
Dim. A
0°
45°
90°
135°
180°
225°
270°
315°
No Key
Part Number
1410297-1
1410297-2
1410297-3
1410297-4
1410297-5
1410297-6
1410297-7
1410297-8
1410297-9
3
MULTIGIG RT Connector
Edge of Daughtercard
8.10
Typ.
[.319]
12.50
[.492]
Top of Motherboard
Guide Module Part Number 1410297-X
32.00
[1.260]
5.70
[.224]
7.40
[.291]
1.50
[.059]
6.50
[.256]
Ø 5.55
[.219]
4.65
[.183]
1.50 ± 0.03
[.059 ± .001]
Ø 10.00
[.394]
6.99
[.275]
28.95
[1.140]
Ø 10.00
[.394]
G
2.00
[.079]
Pin Part Number 1410548-2
Pin Part Number 1410773-X
Dim. G
2.60
.102
4.20
.165
5.70
.224
10.8 mm Wide, Guide Pin, with Keying, with ESD Contact
Contact, ESD
B
A
Housing
6.00
14.50 [.236]
[.571]
5.00
2 Plcs.
[.197]
Ø 3.96 ± 0.05
[.156 ± .002]
5.63
[.222]
12.50
[.492]
5.50
[.217]
3.70
[.146]
Ø 3.96 ± 0.05 2 Plcs.
[.156 ± .002]
Part Number
1410773-2
1410773-3
1410773-4
24.20
[.953]
Ø 7.70
[.303]
2 Plcs.
ESD Orientation
32.00
[1.260]
37.68
[1.483]
4.00
[.157]
2 Plcs.
21.93
[.863]
5.63
Ref.
[.222]
17.00
Ref.
[.669]
17.00
5.00 [.669]
[.197]
Edge of Daughtercard
Top of Motherboard
Guide Module Part Number 1410298
10.70
[.421]
Dim. A
0°
45°
90°
135°
180°
225°
270°
315°
0°
45°
Dim. B Part Number
0°
1410298-1
0°
1410298-2
0°
1410298-3
0°
1410298-4
0°
1410298-5
0°
1410298-6
0°
1410298-7
0°
1410298-8
45°
1410298-9
45°
1-1410298-0
105
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
