1438299-8

7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT RELEASED FOR PUBLICATION 20 6 5 4 3 REVISIONS 2X ( 0.12 ) 2X ( 20 $) 2X ( 20 $) 2X ( 0.12 ) R 0.6 2X 1 20 ALL RIGHTS RESERVED. BY - 2 R 0.2 OPTIONAL CONSTRUCTION 3.8 MIN CONTACT AREA P 5 LTR +0.3 0 DESCRIPTION DATE DWN APVD F1 REVISED PER ECO-11-005030 11MAR2011 RK HMR F2 REVISED PER ECO-15-010152 09JUL2015 DLD WTW F3 REVISED PER ECO-15-017989 16DEC2015 DLD WTW 0.1 1 0.1 0.05 1. MATERIAL: CRIMP: COPPER ALLOY, MATERIAL THICKNESS = 0.25 # 0.01 PIN: COPPER ALLOY, MATERIAL THICKNESS = 0.64 # 0.01 MATERIAL WIDTH = 1.00 # 0.01 2. MUST BE FREE OF CRACKS AND BURRS THAT AFFECT FUNCTION. SECTION K-K D 1.8 0.1 2.7 3.1 2 MAX 0.2 1.62 J-J SECTION 8 0.2 3. WHEN A TIN/GOLD PLATED TERMINAL IS USED ON THE MALE SIDE THEN THE CORRESPONDING PLATING (TIN OR GOLD) MUST BE USED ON THE FEMALE TERMINAL. 0.05 4. 0.2 MM MAX RADIUS PERMISSIBLE ON EDGES AND FILLETS SHOWN AS SHARP FOR STAMPING PARTS. 0.1 5. GENERAL TOLERANCES: .X = # 0.3 .XX = # 0.1 ANGLES = # 3 $ H-H SECTION 6. CRIMP SPECIFICATION : 114-13060. CRIMP B WIRE CRIMP AREAS LASER WELD LOCATED IN THIS AREA SECTION K-K 11.2 2X ( 20 $) 2X 1.3 2X ( 0.12 ) ( 0.12 ) R 0.6 0.1 R 0.45 0.1 0.64 0.1 2.5 0.02 1.62 0.1 PLATE: >= 0.8µm Au IN CONTACT AREA OVER NICKEL. 8 PLATE 2-4µm SILVER IN CONTACT AREA OVER NICKEL. 0.1 1.7 # 0.1 1.6 # 0.2 0.05 7 9. FOR SILVER PLATING: ELECTRICAL PERFORMANCE IS NOT AFFECTED BY GRAY, BROWN OR BLACK TARNISH ON THE SILVER PLATING SURFACES. ACCEPTABLE SILVER SURFACES CAN INCLUDE GRAY, BROWN OR BLACK TARNISH. 6 2X ( 20 $) D H J C C H 0.5 2.4 0.2 2.1 J-J SECTION 0.05 2.1 0.2 K 0.1 J 24.45 # 0.25 H-H SECTION K CRIMP A WIRE CRIMP AREAS 1.25 B 1 0.2 3.2 0.2 3.2 SECTION L-L SECTION 1-1438299-0 1438299-8 1438299-7 1438299-4 1438299-3 1438299-2 A 1438299-1 2-1419158-5 2-1419158-3 1-1419158-6 3-1419158-1 PART NO 4805 (3/13) B A B A B B A A B B A A WIRE CRIMP CODING 0.50/0.75 FIG. 1 0.22/0.35 FIG. 1 0.50/0.75 FIG. 2 0.22/0.35 FIG. 2 0.50/0.75 FIG. 1 0.50/0.75 FIG. 1 0.22/0.35 FIG. 1 0.22/0.35 FIG. 1 0.50/0.75 FIG. 2 0.50/0.75 FIG. 2 0.22/0.35 0.22/0.35 CONDUCTOR WIRE SIZE OPTIONAL CONSTRUCTION B 0.2 L-L GOLD AND SILVER VERSIONS TIN VERSIONS 1-1438299-1 0.2 FIG. 2 FIG. 2 REELING SILVER 8 SILVER 8 SILVER 8 SILVER 8 TIN GOLD REELING OPTIONS FOR REFERNECE ONLY SCALE: 2:1 STANDARD FIG. 2 OPTIONAL FIG. 1 7 TIN GOLD 3-1419158-1 7 TIN GOLD THIS DRAWING IS A CONTROLLED DOCUMENT. DIMENSIONS: 7 mm TIN GOLD 7 PLATING SPEC. MATERIAL - - FINISH - 22JAN2004 CHK 23JAN2004 APVD 23JAN2004 DL DRUMMOND WT WELLINSKY TOLERANCES UNLESS OTHERWISE SPECIFIED: 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES DWN WT WELLINSKY TE Connectivity NAME PRODUCT SPEC - APPLICATION SPEC - SEE NOTES WEIGHT - CUSTOMER DRAWING A PART NUMBER SIZE CAGE CODE A1 00779 0.64mm GET MALE IN-LINE TERMINAL - DRAWING NO 3-1419158-1 SCALE 8:1 SHEET RESTRICTED TO 1 OF - 1 REV F3