Section Catalog 1308070-2.
MCON Interconnection System
Revised 12-2009.
Main Catalog 1654400-1
Chapter 4 – Issued 3-2010.
Introduction
MCON Interconnection
System offers
High Reliability for
Long Term Use
The New Generation MCON
Connector System is designed
for electronic and electrical
applications in motor vehicles.
It fullfils all requirements for
a connector system for use in
automobiles and covers a
wide range of applications.
MCON Contact System
MCON Connectors
■ Base material with high
current capacity
■ 8 defined contact points
for increased reliability
■ Improved vibration
resistance
■ Good guiding inside the
cavity
■ Protected contact spring
due to the closed box
■ Overstress protection of the
contact springs
■ Box with polarization and
secondary locking feature
■ Protected locking lance
■ High reliability status
supported for long term use
■ High vibration level supported
■ Perfect design to avoid
quality problems, reduce
manufacturing and service
cost
■ Integrated secondary
locking device delivered in
pre-locked position
■ Wire-to-wire sealed and
unsealed connectors (SWS)
■ Wire-to-board sealed and
unsealed connectors (SWS)
■ Polarization, several keyings
■ Locking mechanism for
smaller connectors/mating
aid for higher numbers of
ways
OBSOLETE
NOT the LATEST
REVISION
All specifications subject to change. Consult Tyco Electronics for latest specifications.
4-1
Section Catalog 1308070-2.
MCON Interconnection System
Revised 12-2009.
Main Catalog 1654400-1
Chapter 4 – Issued 3-2010.
Engineering Notes
4-2
All specifications subject to change. Consult Tyco Electronics for latest specifications.
Section Catalog 1308070-2.
MCON Interconnection System
Contact System
Revised 12-2009.
Main Catalog 1654400-1
Chapter 4 – Issued 3-2010.
Introduction
MCON Tabs and
Receptacles for
Fast and Economical
Application
The MCON New Generation
Contact System is mainly used
in the automotive industry.
Each contact consists of a flat
receptacle, which mates with
a flat tab. Base material of
contact spring and body is
copper alloy.
The two-piece contact design
means that the electrical and
mechanical properties are
separated. One end of the
contact body is crimped to
wire and the other end mates
with the matching tab.
■ Protection of the contact
springs
The Main Advantages of the
MCON Contact System are :
■ No over elongation of the
contact springs possible
under normal circumstances
■ Base material with high
current capacity
■ No possibility to connect
from the rear side
■ Protection against
mechanical damage
■ 8 or more defined contact
points for increased reliability
■ Improved vibration
resistance
■ Good guiding in the cavity
■ Good guiding inside the
cavity
■ Secondary locking possible
(from 3 directions)
■ Protected contact spring
due to the closed box
■ Assembly into housing
fully-automatically
■ Overstress protection of the
contact springs
Tabs and receptacles can be
applied in both sealed and
unsealed connectors.
MCON contacts can be fast
and economically arranged to
the lead using Tyco Electronics
application tooling.
■ Box with secondary locking
feature
■ Protected locking lance
All specifications subject to change. Consult Tyco Electronics for latest specifications.
4-3
Section Catalog 1308070-2.
Revised 12-2009.
MCON Interconnection System
MCON-1.2 mm Contact System
Main Catalog 1654400-1
Chapter 4 – Issued 3-2010.
Receptacle Contacts – Locking Lance (LL)
Technical Features
Contact Material:
CuSn0.15/0.2;
Insert Spring: CuNiSi
Contact Finish:
Tin-silver plated, selective silver
plated, selective gold plated
0.2
2.4
1.83
Wire Size Range:
0.14–0.22 mm2,
0.25–0.35 mm2,
0.50–0.75 mm2,
1.00–1.50 mm2
15.0–16.5
Current Carrying Capacity:
up to 20 Ampere
(at 20 °C ambient temperature)
Temperature Range:
–40 °C ... +140 °C (tin-silver plated)
–40 °C ... +140 °C (silver plated)
–40 °C ... +150 °C (gold plated)
1.83
Contact Resistance:
New State ⱕ2 m⍀
7.25
Mating Cycles: ●
up to 20 cycles (tin-silver plated)
up to 50 cycles (silver plated)
up to 100 cycles (gold plated)
Dimension of Male Contacts:
(1.2 ±0.1 x 0.6 ±0.03 mm)
Extraction Tool:
Part No. 5-1579007-3
Modular Dimensions (Centerline):
max. 0.75 mm2
2.5 x 2.5 mm
Mating Force:
Max. 5 N
max. 1.0 mm
2
2.5 x 3.0 mm
Unmating Force:
Max. 2.5 N
sealed 4.0 x 4.0 mm;
sealed staggered 3.5 x 4.0 mm,
cavity 3.55 mm diameter
max. 1.5 mm2
2.5 x 3.5 mm
3.0 x 3.5 mm
sealed 4.5 x 4.5 mm;
sealed staggered 4.0 x 4.5 mm,
cavity 3.95 mm diameter
Product Group Drawing:
1452674
Product Specification:
108-18782
Application Specification:
114-18464
●)
Mating Cycles are depending
on various technical influences
and must be clarified in each
individual case.
4-4
All specifications subject to change. Consult Tyco Electronics for latest specifications.
Section Catalog 1308070-2.
Revised 12-2009.
MCON Interconnection System
MCON-1.2 mm Contact System
Receptacle Contacts – Locking Lance (LL)
Main Catalog 1654400-1
Chapter 4 – Issued 3-2010.
(continued)
Standard Receptacle Contacts (SRC)
Wire Size
Range
(mm2 )
Part Numbers
Insulation Diameter
(mm)
Material
and Finish ✱
Strip
Form
Package
Quantity
LoosePiece
Package
Quantity
-1 / -2 / -3
1452653
10,000
1452654
500
x-1528156-x
䉫 2063574-x 䉫
1.4–1.9
-1 / -2 / -3
1452656
8,000
1452657
500
x-1528157-x
䉫 2063570-x 䉫
1.9–2.4
-1 / -2 / -3
1452659
8,000
1452660
500
x-1528159-x
䉫 2063575-x 䉫
FLK
FLR
0.25–0.35
–
1.10–1.75
0.50–0.75
–
1.0–1.5
–
䉬
Applicator 䉬
Hand Tool
Receptacle Contacts with Single Wire Sealing System (SWS)
Wire Size
Range
(mm2 )
✱)
Part Numbers
Insulation Diameter
(mm)
Material
and Finish ✱
FLK
FLR
0.25–0.35
–
1.10–1.75
0.50–0.75
–
1.4–1.9
1.0–1.5
–
1.9–2.4
Strip
Form
Package
Quantity
LoosePiece
Package
Quantity
-1 / -2 / -3
1452665
6,500
1452666
500
x-1528161-x
䉫 2063573-x 䉫
-1 / -2 / -3
1452668
6,500
1452669
500
x-1528162-x
2063537-1
-1 / -2 / -3
1452671
6,500
1452672
500
x-1528163-x
2119104-1
Material and Finish:
xxx-1 = CuNiSi, pre-tin/silver plated
xxx-2 = CuNiSi, selective gold plated
xxx-3 = CuNiSi, selective silver plated
䉬)
Note: All part numbers are
RoHS and ELV compliant.
䉬
Applicator 䉬
The pre- and suffix for the
applicators depends on the
applied termination equipment.
Hand Tool
䉫)
On request.
Receptacle Contacts with Short Circuit Area
Wire Size
Range
(mm2 )
0.5
✱)
Insulation Diameter
(mm)
FLK
FLR
–
1.4–1.7
Material and Finish:
xxx-1 = CuNiSi, selective gold plated
Part Numbers
Material
and Finish ✱
-1
Strip
Form
Package
Quantity
LoosePiece
Package
Quantity
䉬 Applicator 䉬
Hand Tool
1563888
8,000
1563889
500
x-1528944-x
2119105-1
Note: All part numbers are
RoHS and ELV compliant.
All specifications subject to change. Consult Tyco Electronics for latest specifications.
䉬
) The pre- and suffix for the
applicators depends on the
applied termination equipment.
4-5
Section Catalog 1308070-2.
Revised 12-2009.
MCON Interconnection System
MCON-1.2 mm Contact System
Main Catalog 1654400-1
Chapter 4 – Issued 3-2010.
Receptacle Contacts – Clean Body (CB)
Technical Features
Contact Material:
CuSn0.15/0.2; Insert Spring: CuNiSi
Contact Finish:
Tin-silver plated, selective silver
plated, selective gold plated
Wire Size Range:
0.14–0.22 mm2, 0.25–0.35 mm2,
0.50–0.75 mm2, 1.00–1.50 mm2
Current Carrying Capacity:
up to 20 Ampere
(at 20 °C ambient temperature)
Temperature Range:
–40 °C ... +140 °C (tin-silver plated)
–40 °C ... +140 °C (silver plated)
–40 °C ... +150 °C (gold plated)
Contact Resistance:
New State ⱕ2 m⍀
Mating Cycles: ●
up to 20 cycles (tin-silver plated)
up to 50 cycles (silver plated)
up to 100 cycles (gold plated)
Dimension of Male Contacts:
(1.2 ±0.1 x 0.6 ±0.03 mm)
Extraction Tools depend on the
Terminal/Housing Combination
– Typically:
Part Nos. 1579007-8 and
1-1579007-0 (Secondary Lock)
Mating Force: Max. 5 N
Unmating Force: Max. 2.5 N
0.22
2.4
1.83
15.0–16.5
1.83
7.25
Modular Dimensions (Centerline):
max. 0.75 mm2 2.5 x 2.5 mm
2.5 x 3.0 mm
sealed 4.0 x 4.0 mm;
max. 1.0 mm2
sealed staggered 3.5 x 4.0 mm,
cavity 3.55 mm diameter
2.5 x 3.5 mm
sealed 4.5 x 4.5 mm;
max. 1.5 mm2
3.0 x 3.5 mm
sealed staggered 4.0 x 4.5 mm,
cavity 3.95 mm diameter
●)
Product Group Drawing:
1534326
Product Specification:
108-18782
Application Specification:
114-18464
Mating Cycles are depending on various technical influences and must be clarified in each individual case.
Standard Receptacle Contacts (SRC)
Wire Size
Range
(mm2 )
Part Numbers
Insulation Diameter
(mm)
Material
and Finish ✱
FLK
FLR
0.25–0.35
–
1.10–1.75
-1 / -2 / -3
0.50–0.75
–
1.4–1.9
-1 / -2 / -3
1.0–1.5
–
1.9–2.4
-1 / -2 / -3
Strip
Form
Package
Quantity
LoosePiece
Package
Quantity
1534594
10,000
1534595
500
x-1528147-x
䉫 2119107-x 䉫
#1670144#
8,000
#1670145#
500
x-1528673-x
䉫 2119108-x 䉫
1394897
8,000
1534063
500
x-1528148-x
䉫 2063676-x 䉫
1452503
8,000
1452504
500
x-1528150-x
䉫 2063565-x 䉫
䉬
Applicator 䉬
Hand Tool
Receptacle Contacts with Single Wire Sealing System (SWS)
Wire Size
Range
(mm2 )
✱)
Part Numbers
Insulation Diameter
(mm)
Material
and Finish ✱
Strip
Form
Package
Quantity
LoosePiece
Package
Quantity
䉬 Applicator 䉬
Hand Tool
-1 / -2 / -3
1418841
6,500
–
–
x-1528151-x
䉫 2119109-x 䉫
1.10–1.75
-1 / -2 / -3
1418844
6,500
1418845
500
x-1528152-x
䉫 2119110-x 䉫
–
1.4–1.9
-1 / -2 / -3
#1670146#
6,500
#1670147#
500
x-1528674-x
䉫 2119111-x 䉫
1418847
6,500
1418848
500
x-1528153-x
䉫 2119112-x 䉫
–
1.9–2.4
-1 / -2 / -3
1418850
6,500
1418851
500
x-1528154-x
䉫 2119113-x 䉫
FLK
FLR
0.14–0.22
–
1.05–1.20
0.25–0.35
–
0.50–0.75
1.0–1.5
Material and Finish:
xxx-1 = CuNiSi, pre-tin/silver plated
xxx-2 = CuNiSi, selective gold plated
xxx-3 = CuNiSi, selective silver plated
4-6
䉬)
The pre- and suffix for the
applicators depends on the
applied termination equipment.
䉫
) On request.
#) CAUTION: Future Strip Form Orders will be replaced.
Because of change of the wire crimp at the new Part Nos.
1670144 and 1670146 they will be processed with new crimp
heights. See latest Application Specification 114-18464.
All specifications subject to change. Consult Tyco Electronics for latest specifications.
Section Catalog 1308070-2.
Revised 12-2009.
MCON Interconnection System
MCON-1.2 mm Contact System
Main Catalog 1654400-1
Chapter 4 – Issued 3-2010.
Tab Contacts – Locking Lance (LL)
Technical Features
Contact Material:
CuNiSi;
Insert Tab: CuSn0.15/0.2
9.2
16.3–16.8
Contact Finish:
Tin-silver plated,
selective silver plated,
selective gold plated
0.2
Wire Size Range:
0.14–0.22 mm2,
0.25–0.35 mm2,
0.50–0.75 mm2,
1.00–1.50 mm2
0.63
2.4
1.83
7.5
Extraction Tool:
Part No. 5-1579007-3
1.2
Product Group Drawing:
1418754
1.83
Product Specification:
108-18782
Application Specification:
114-18464
Modular Dimensions (Centerline):
max. 0.75 mm2 2.5 x 2.5 mm
2.5 x 3.0 mm
sealed 4.0 x 4.0 mm;
max. 1.0 mm2
sealed staggered 3.5 x 4.0 mm,
cavity 3.55 mm diameter
2.5 x 3.5 mm
sealed 4.5 x 4.5 mm;
max. 1.5 mm2
3.0 x 3.5 mm
sealed staggered 4.0 x 4.5 mm,
cavity 3.95 mm diameter
Standard Tab Contacts
Wire Size
Range
(mm2 )
Part Numbers
Insulation Diameter
(mm)
Material
and Finish ✱
Strip
Form
Package
Quantity
LoosePiece
Package
Quantity
䉬 Applicator 䉬
Hand Tool
-1 / -2 / -3
1418756
9,000
1418757
500
x-1528427-x
䉫 2119102-x 䉫
-1 / -2 / -3
1418758
9,000
1418759
500
x-1528428-x
䉫 2063574-x 䉫
1.4–1.9
-1 / -2 / -3
1418760
8,000
1418761
500
x-1528506-x
䉫 2063570-x 䉫
1.9–2.4
-1 / -2 / -3
1418762
7,000
1418763
500
x-1528507-x
䉫 2063575-x 䉫
FLK
FLR
0.14–0.22
–
1.05–1.20
0.25–0.35
–
1.10–1.75
0.50–0.75
–
1.0–1.5
–
Tab Contacts with Single Wire Sealing System (SWS)
Wire Size
Range
(mm2 )
Part Numbers
Insulation Diameter
(mm)
Material
and Finish ✱
Strip
Form
Package
Quantity
-1 / -2 / -3
1718756
6,500
–
–
x-1528508-x
2119103-1
-1 / -2 / -3
1718758
6,500
1718759
500
x-1528509-x
䉫 2063573-x 䉫
1.4–1.9
-1 / -2 / -3
1718760
6,000
1718761
500
x-1528510-x
2063537-1
1.9–2.4
-1 / -2 / -3
1718762
6,000
1718763
500
x-1528511-x
2119104-1
FLK
FLR
0.14–0.22
–
1.05–1.20
0.25–0.35
–
1.10–1.75
0.50–0.75
–
1.0–1.5
–
LoosePiece
Package
Quantity
䉬
Applicator 䉬
Hand Tool
✱
) Material and Finish:
xxx-1 = CuNiSi, pre-tin
xxx-2 = CuNiSi, selective gold plated
xxx-3 = CuNiSi, selective silver plated
Note: All part numbers are
RoHS and ELV compliant.
䉬)
The pre- and suffix for the
applicators depends on the
applied termination equipment.
All specifications subject to change. Consult Tyco Electronics for latest specifications.
䉫)
On request.
4-7
Section Catalog 1308070-2.
Revised 12-2009.
MCON Interconnection System
MCON-1.2 mm Contact System
Main Catalog 1654400-1
Chapter 4 – Issued 3-2010.
Tab Contacts – Clean Body (CB)
Technical Features
Contact Material:
CuSn0.15/0.2;
Insert Tab: CuSn0.15/0.2
9.2
15.3
Contact Finish:
Tin-silver plated,
selective silver plated,
selective gold plated
0.2
Wire Size Range:
0.25–0.35 mm2,
0.50–0.75 mm2
0.63
2.4
1.83
Modular Dimensions
(Centerline):
max. 0.75 mm2 2.5 x 2.5 mm
max. 1.0 mm2
2.5 x 3.0 mm
max. 1.5 mm2
2.5 x 3.5 mm
3.0 x 3.5 mm
7.5
Product Group Drawing:
1718398
1.2
Product Specification:
108-18782
1.83
Application Specification:
114-18464
Standard Tab Contacts
Wire Size
Range
(mm2 )
✱)
Part Numbers
Insulation Diameter
(mm)
Material
and Finish ✱
FLK
FLR
0.25–0.35
–
1.10–1.75
0.50–0.75
–
1.4–1.9
Material and Finish:
xxx-1 = CuNiSi, pre-tin
xxx-2 = CuNiSi, selective gold plated
xxx-3 = CuNiSi, selective silver plated
4-8
Strip
Form
Package
Quantity
LoosePiece
Package
Quantity
䉬 Applicator 䉬
Hand Tool
-1 / -2 / -3
1718348
9,000
1703698
500
x-1528156-x
䉫 2063574-x 䉫
-1 / -2 / -3
1718350
8,000
1718390
500
x-1528157-x
䉫 2063570-x 䉫
Note: All part numbers are
RoHS and ELV compliant.
䉬)
The pre- and suffix for the
applicators depends on the
applied termination equipment.
All specifications subject to change. Consult Tyco Electronics for latest specifications.
䉫)
On request.
Section Catalog 1308070-2.
Revised 12-2009.
MCON Interconnection System
MCON-1.2 mm Contact System
Main Catalog 1654400-1
Chapter 4 – Issued 3-2010.
Single Wire Seals and Sealing Plugs
Single Wire Seals
and Sealing Plugs for
MCON Contact System
(Cavity Diameter 3.55 mm
and 3.95 mm)
3.1
2.6
4.1
0.8
8.5
3.1
2.6
4.7
0.8
8.6
Cavity Diameter 3.55 mm
Insulation Diameter
FLK
(mm)
FLR
(mm)
Color
Part Number
Package
Quantity
–
0.9–1.4
Yellow
967067-2
20,000
–
1.4–2.1
Green
967067-1
20,000
Blue
967056-1
5,000
Color
Part Number
Package
Quantity
20,000
Sealing Plug
Cavity Diameter 3.95 mm
Insulation Diameter
FLK
(mm)
FLR
(mm)
–
0.9–1.9
Gray
963142-2
–
1.9–2.4
Green
967067-1
20,000
White
963143-1
20,000
Sealing Plug
All specifications subject to change. Consult Tyco Electronics for latest specifications.
4-9
Section Catalog 1308070-2.
Revised 12-2009.
MCON Interconnection System
MCON-2.8 mm Contact System
Main Catalog 1654400-1
Chapter 4 – Issued 3-2010.
Receptacle Contacts
Technical Features
17.5–20.0
Contact Material:
CuSn0.15/0.2;
Insertion Spring: CuNiSi
7.3
Contact Finish:
Tin-silver plated,
selective silver plated
5.55
Wire Size Range:
0.20–0.35 mm2,
0.50 mm2,
0.75–1.00 mm2,
⬎1.0–2.5 mm2
⬎2.5–4.0 mm2
3.8
2.5
Extraction Tool:
Part No. 5-1579008-2
4.3
Product Group Drawing:
1719797
Product Specification:
108-94002
Application Specification:
114-18718
Modular Dimensions (Centerline):
5.0 x 5.5 mm
max. 2.5 mm2
staggered 4.5 x 5.5 mm
max. 4.0 mm2
5.5 x 5.5 mm
staggered 5.0 x 5.5 mm
sealed 5.5 x 5.5 mm
sealed staggered 5.0 x 5.5 mm
cavity diameter 4.9 mm
sealed 7.2 x 7.2 mm
sealed staggered 6.0 x 7.2 mm
cavity diameter 6.4 mm
Standard Receptacle Contacts
Wire Size
Range
(mm2 )
Part Numbers
Insulation Diameter
(mm)
Material
and Finish ✱
Strip
Form
Package
Quantity
LoosePiece
Package
Quantity
-1 / -3
1719836
2,500
1719837
500
x-1528691-x
-1 / -3
1563719
2,500
1563720
500
x-1528899-x
1.7–2.1
-1 / -3
1719838
2,500
1719839
500
x-1528632-x
–
2.2–3.0
-1 / -3
1719840
2,500
1719841
500
x-1528633-x
䉫 2119121-x 䉫
–
3.4–3.7
-1 / -3
1718475
2,500
1718477
500
x-1528585-x
䉫 2119122-x 䉫
FLK
FLR
0.20–0.35
–
1.15–1.40
0.50
–
1.4–1.6
0.75–1.00
–
>1.0–2.5>
>2.5–4.0>
䉬
Applicator 䉬
Hand Tool
䉫 2119119-x 䉫
䉫 2119120-x 䉫
Receptacle Contacts with Single Wire Sealing System (SWS)
Wire Size
Range
(mm2 )
✱)
Part Numbers
Insulation Diameter
(mm)
FLK
Material
and Finish ✱
FLR
Strip
Form
Package
Quantity
LoosePiece
Package
Quantity
䉬
Applicator 䉬
Hand Tool
0.50
–
1.4–1.6
-1 / -3
1563935
2,500
1563936
500
–
–
0.75–1.00
–
1.7–2.1
-1 / -3
1670802
2,500
1670803
500
x-1528773-x
䉫 2119123-x 䉫
>1.0–2.5>
–
2.2–3.0
-1 / -3
1670804
2,500
1670805
500
x-1528774-x
䉫 2119124-x 䉫
>2.5–4.0>
–
3.4–3.7
-1 / -3
1670806
2,500
1670807
500
x-1528775-x
䉫 2119125-x 䉫
Material and Finish:
xxx-1 = CuNiSi, pre-tin/silver plated
xxx-3 = CuNiSi, selective silver plated
4-10
Note: All part numbers are
RoHS and ELV compliant.
䉬
) The pre- and suffix for the
applicators depends on the
applied termination equipment.
All specifications subject to change. Consult Tyco Electronics for latest specifications.
䉫
) On request.
Section Catalog 1308070-2.
Revised 12-2009.
MCON Interconnection System
MCON-2.8 mm Contact System
Main Catalog 1654400-1
Chapter 4 – Issued 3-2010.
Single Wire Seals and Sealing Plugs
Single Wire Seals
and Sealing Plugs
for MCON Contact System
(Cavity Diameter 4.9 mm
and 6.4 mm)
4.3
⭋ 3.4
A
7.8
Cavity Diameter 4.9 mm
Wire Size
Range
(mm)
Insulation
Diameter
(mm)
Color
Diameter
A
(mm)
0.75–1.00
1.4–2.1
Blue
5.6
> 1.5–2.5>
2.2–3.0
Sealing Plug
Part Number
Package
Quantity
828904-1
1,000
828904-2
10,000
White
5.6
828905-1
10,000
Natural
5.6
828922-1
10,000
Cavity Diameter 6.4 mm
Wire Size
Range
(mm)
Insulation
Diameter
(mm)
Color
Diameter
A
(mm)
Part Number
Package
Quantity
> 2.5–4.0>
3.4–3.7
Green
7.2
828985-1
5,000
Brown
7.2
828986-1
5,000
Sealing Plug
All specifications subject to change. Consult Tyco Electronics for latest specifications.
4-11
Section Catalog 1308070-2.
MCON Interconnection System
Revised 12-2009.
Main Catalog 1654400-1
Chapter 4 – Issued 3-2010.
Engineering Notes
4-12
All specifications subject to change. Consult Tyco Electronics for latest specifications.
Section Catalog 1308070-2.
MCON Interconnection System
Housing and Connectors
Revised 12-2009.
Main Catalog 1654400-1
Chapter 4 – Issued 3-2010.
Introduction
MCON Connectors offer
Highest Reliability for
Use in the Automotive
Industry
The New Generation MCON
Connector System offers
receptacle and tab housings
with capability for waterproofing and resistance to conditions of extreme vibration.
The system is designed for
electronic and electrical
applications in motor vehicles,
where vibrations and mechanical stress, in the long term,
can affect the quality on the
contact system.
Features
■ CPA (Connector Position
Assurance) capability
■ High reliability status
supported for long term use
■ High vibration level
supported
■ Perfect design to avoid
quality problems, reduce
manufacturing and service
cost
■ Integrated secondary
locking device delivered in
pre-locked position
All specifications subject to change. Consult Tyco Electronics for latest specifications.
■ Wire-to-Wire sealed and
unsealed connectors (SWS)
■ Wire-to-Board sealed and
unsealed connectors (SWS)
■ Polarization, several keyings
■ Locking mechanism for
smaller connectors/mating
aid for higher numbers of
ways
4-13
Section Catalog 1308070-2.
Revised 12-2009.
MCON Interconnection System
Housing and Connectors
Main Catalog 1654400-1
Chapter 4 – Issued 3-2010.
Sealed 1.2 mm Receptacle Housings for Locking Lance Contacts
Technical Features
No. of Positions:
2 Positions
Housing Material:
PA66-GF15
Wire Size Range:
1.0 mm2
26.5
Product Specification:
108-18969
Application Specification:
114-18861
4.0
14.9
15.0
Sealed 1.2 mm Receptacle Housings
Part Numbers
No. of
Positions
Keying
Options
Housing
Color
2
A
Black
4-14
Receptacle
Housing
Cover
Mating
Tab Housing
1-1718643-1
–
–
All specifications subject to change. Consult Tyco Electronics for latest specifications.
Mating PCB Header
Right-Angle
Vertical
–
–
Section Catalog 1308070-2.
Revised 12-2009.
MCON Interconnection System
Housing and Connectors
Main Catalog 1654400-1
Chapter 4 – Issued 3-2010.
Sealed 1.2 mm Receptacle Housings for Locking Lance Contacts
Technical Features
No. of Positions:
2 Positions
Housing Material:
PA66 GF15
Wire Size Range:
1.0 mm2
26.5
Product Specification:
108-18969
Application Specification:
114-18861
4.0
11.0
18.8
Sealed 1.2 mm Receptacle Housings
Part Numbers
No. of
Positions
Keying
Options
Housing
Color
2
A
Black
Receptacle
Housing
Cover
Mating
Tab Housing
1-1718811-1
–
–
All specifications subject to change. Consult Tyco Electronics for latest specifications.
Mating PCB Header
Right-Angle
Vertical
–
–
4-15
Section Catalog 1308070-2.
Revised 12-2009.
MCON Interconnection System
Housing and Connectors
Main Catalog 1654400-1
Chapter 4 – Issued 3-2010.
Sealed 1.2 mm Receptacle Housings for Locking Lance Contacts
Technical Features
No. of Positions:
2 Positions
Housing Material:
PA66-GF30/PA6-GF15
Wire Size Range:
1.0 mm2
26.5
Product Specification:
108-18969
Application Specification:
114-18861
4.0
11.0
18.8
Sealed 1.2 mm Receptacle Housings
Part Numbers
No. of
Positions
Keying
Options
Housing
Color
2
A
Black
4-16
Receptacle
Housing
Cover
Mating
Tab Housing
1-1564440-1
–
–
All specifications subject to change. Consult Tyco Electronics for latest specifications.
Mating PCB Header
Right-Angle
Vertical
–
–
Section Catalog 1308070-2.
Revised 12-2009.
MCON Interconnection System
Housing and Connectors
Main Catalog 1654400-1
Chapter 4 – Issued 3-2010.
Sealed 1.2 mm Receptacle Housings for Locking Lance Contacts
Technical Features
No. of Positions:
2 Positions
Housing Material:
PA66-GF30/PA6-GF15
Wire Size Range:
1.0 mm2
26.5
Product Specification:
108-18969
Application Specification:
114-18861
4.0
14.8
15.0
Sealed 1.2 mm Receptacle Housings
Part Numbers
No. of
Positions
Keying
Options
Housing
Color
2
A
Black
Receptacle
Housing
Cover
Mating
Tab Housing
1-1670915-1
–
–
All specifications subject to change. Consult Tyco Electronics for latest specifications.
Mating PCB Header
Right-Angle
Vertical
–
–
4-17
Section Catalog 1308070-2.
Revised 12-2009.
MCON Interconnection System
Housing and Connectors
Main Catalog 1654400-1
Chapter 4 – Issued 3-2010.
Sealed 1.2 mm Receptacle Housings for Locking Lance Contacts
Technical Features
No. of Positions:
2 Positions
Housing Material:
PA66-GF30/PA6-GF15
Wire Size Range:
1.0 mm2
26.5
Product Specification:
108-18969
Application Specification:
114-18861
4.0
14.8
15.0
Sealed 1.2 mm Receptacle Housings
Part Numbers
No. of
Positions
2
4-18
Keying
Options
Housing
Color
Receptacle
Housing
Cover
Mating
Tab Housing
Mating PCB Header
Right-Angle
Vertical
A
Black
1-1670916-1
–
1-1703498-1
–
–
B
Natural
2-1670916-1
–
–
–
–
All specifications subject to change. Consult Tyco Electronics for latest specifications.
Section Catalog 1308070-2.
Revised 12-2009.
MCON Interconnection System
Housing and Connectors
Main Catalog 1654400-1
Chapter 4 – Issued 3-2010.
Sealed 1.2 mm Tab Housings for Locking Lance Contacts
Technical Features
No. of Positions:
2 Positions
8.6
Housing Material:
PBT-GF30
Wire Size Range:
1.0 mm2
Product Specification:
––
44.0
Application Specification:
114-18910-1
14.8
14.95
Sealed 1.2 mm Tab Housings
Part Numbers
No. of
Positions
Keying
Options
Housing
Color
2
A
Black
Tab
Housing
Cover
Mating
Receptacle Housing
1-1703498-1
–
1-1670916-1
All specifications subject to change. Consult Tyco Electronics for latest specifications.
Mating PCB Header
Right-Angle
Vertical
–
–
4-19
Section Catalog 1308070-2.
Revised 12-2009.
MCON Interconnection System
Housing and Connectors
Main Catalog 1654400-1
Chapter 4 – Issued 3-2010.
Sealed 1.2 mm Tab Housings for Locking Lance Contacts
Technical Features
8.6
No. of Positions:
2 Positions
Housing Material:
PBT-GF30
Wire Size Range:
1.0 mm2
Product Specification:
––
44.0
Application Specification:
114-18910-1
14.8
17.05
Sealed 1.2 mm Tab Housings
Part Numbers
No. of
Positions
Keying
Options
Housing
Color
2
A
Black
4-20
Tab
Housing
Cover
Mating
Receptacle Housing
1-1703498-2
–
1-1670916-1
All specifications subject to change. Consult Tyco Electronics for latest specifications.
Mating PCB Header
Right-Angle
Vertical
–
–
Section Catalog 1308070-2.
Revised 12-2009.
MCON Interconnection System
Housing and Connectors
Main Catalog 1654400-1
Chapter 4 – Issued 3-2010.
Sealed 1.2 mm Receptacle Housings for Locking Lance Contacts
Technical Features
No. of Positions:
3 Positions
Housing Material:
PA66-GF15
Wire Size Range:
1.0 mm2
26.5
Product Specification:
108-18969
Application Specification:
114-18861
4.0
11.0
19.0
Sealed 1.2 mm Receptacle Housings
Part Numbers
No. of
Positions
Keying
Options
Housing
Color
3
A
Black
Receptacle
Housing
Cover
Mating
Tab Housing
1-1718644-1
–
–
All specifications subject to change. Consult Tyco Electronics for latest specifications.
Mating PCB Header
Right-Angle
Vertical
–
–
4-21
Section Catalog 1308070-2.
Revised 12-2009.
MCON Interconnection System
Housing and Connectors
Main Catalog 1654400-1
Chapter 4 – Issued 3-2010.
Sealed 1.2 mm Receptacle Housings for Locking Lance Contacts
Technical Features
No. of Positions:
3 Positions
Housing Material:
PA66-GF15
Wire Size Range:
1.0 mm2
26.5
Product Specification:
108-18969
Application Specification:
114-18861
4.0
11.0
22.8
Sealed 1.2 mm Receptacle Housings
Part Numbers
No. of
Positions
Keying
Options
Housing
Color
3
A
Black
4-22
Receptacle
Housing
Cover
Mating
Tab Housing
1-1718812-2
–
–
All specifications subject to change. Consult Tyco Electronics for latest specifications.
Mating PCB Header
Right-Angle
Vertical
–
–
Section Catalog 1308070-2.
Revised 12-2009.
MCON Interconnection System
Housing and Connectors
Main Catalog 1654400-1
Chapter 4 – Issued 3-2010.
Sealed 1.2 mm Receptacle Housings for Locking Lance Contacts
Technical Features
No. of Positions:
3 Positions
Housing Material:
PA66-GF30/PA6-GF15
Wire Size Range:
1.0 mm2
26.5
Product Specification:
108-18969
Application Specification:
114-18861
4.0
14.8
19.0
Sealed 1.2 mm Receptacle Housings
Part Numbers
No. of
Positions
3
Keying
Options
Housing
Color
Receptacle
Housing
Cover
Mating
Tab Housing
Mating PCB Header
Right-Angle
Vertical
A
Black
1-1670917-1
–
1-1703494-1
–
–
B
Natural
2-1670917-1
–
–
–
–
All specifications subject to change. Consult Tyco Electronics for latest specifications.
4-23
Section Catalog 1308070-2.
Revised 12-2009.
MCON Interconnection System
Housing and Connectors
Main Catalog 1654400-1
Chapter 4 – Issued 3-2010.
Sealed 1.2 mm Tab Housings for Locking Lance Contacts
Technical Features
8.6
No. of Positions:
3 Positions
Housing Material:
PBT-GF30
Wire Size Range:
1.0 mm2
Product Specification:
––
44.0
Application Specification:
114-18910-1
18.8
14.95
Sealed 1.2 mm Tab Housings
Part Numbers
No. of
Positions
Keying
Options
Housing
Color
3
A
Black
4-24
Tab
Housing
Cover
Mating
Receptacle Housing
1-1703494-1
–
1-1670917-1
All specifications subject to change. Consult Tyco Electronics for latest specifications.
Mating PCB Header
Right-Angle
Vertical
–
–
Section Catalog 1308070-2.
Revised 12-2009.
MCON Interconnection System
Housing and Connectors
Main Catalog 1654400-1
Chapter 4 – Issued 3-2010.
Sealed 1.2 mm Tab Housings for Locking Lance Contacts
Technical Features
8.6
No. of Positions:
3 Positions
Housing Material:
PBT-GF30
Wire Size Range:
1.0 mm2
Product Specification:
––
44.0
Application Specification:
114-18910-1
18.8
14.95
Sealed 1.2 mm Tab Housings
Part Numbers
No. of
Positions
Keying
Options
Housing
Color
3
A
Black
Tab
Housing
Cover
Mating
Receptacle Housing
1-1703494-2
–
1-1670917-1
All specifications subject to change. Consult Tyco Electronics for latest specifications.
Mating PCB Header
Right-Angle
Vertical
–
–
4-25
Section Catalog 1308070-2.
Revised 12-2009.
MCON Interconnection System
Housing and Connectors
Main Catalog 1654400-1
Chapter 4 – Issued 3-2010.
Sealed 1.2 mm Receptacle Housings for Locking Lance Contacts
Technical Features
No. of Positions:
4 Positions
Housing Material:
PA66-GF15
Wire Size Range:
1.0 mm2
26.5
Product Specification:
108-18969
Application Specification:
114-18861
4.0
16.5
24.7
Sealed 1.2 mm Receptacle Housings
Part Numbers
No. of
Positions
Keying
Options
Housing
Color
4
A
Black
4-26
Receptacle
Housing
Cover
Mating
Tab Housing
1-1718645-1
–
–
All specifications subject to change. Consult Tyco Electronics for latest specifications.
Mating PCB Header
Right-Angle
Vertical
–
–
Section Catalog 1308070-2.
Revised 12-2009.
MCON Interconnection System
Housing and Connectors
Main Catalog 1654400-1
Chapter 4 – Issued 3-2010.
Sealed 1.2 mm Receptacle Housings for Locking Lance Contacts
Technical Features
No. of Positions:
4 Positions
Housing Material:
PA66-GF30/PA6-GF15
Wire Size Range:
1.0 mm2
26.5
Product Specification:
108-18969
Application Specification:
114-18861
4.0
16.5
24.7
Sealed 1.2 mm Receptacle Housings
Part Numbers
No. of
Positions
4
Keying
Options
Housing
Color
Receptacle
Housing
Cover
Mating
Tab Housing
Mating PCB Header
Right-Angle
Vertical
A
Black
1-1670918-1
–
1-1564559-1
–
–
B
Natural
2-1670918-1
–
–
–
–
All specifications subject to change. Consult Tyco Electronics for latest specifications.
4-27
Section Catalog 1308070-2.
Revised 12-2009.
MCON Interconnection System
Housing and Connectors
Main Catalog 1654400-1
Chapter 4 – Issued 3-2010.
Sealed 1.2 mm Tab Housings for Locking Lance Contacts
Technical Features
21.9
No. of Positions:
4 Positions
9.9
Housing Material:
PBT-GF30
Wire Size Range:
1.0 mm2
Product Specification:
––
44.0
Application Specification:
114-18910-1
16.3
Sealed 1.2 mm Tab Housings
Part Numbers
No. of
Positions
Keying
Options
Housing
Color
4
A
Black
4-28
Tab
Housing
Cover
Mating
Receptacle Housing
1-1564559-1
–
1-1670918-1
All specifications subject to change. Consult Tyco Electronics for latest specifications.
Mating PCB Header
Right-Angle
Vertical
–
–
Section Catalog 1308070-2.
Revised 12-2009.
MCON Interconnection System
Housing and Connectors
Main Catalog 1654400-1
Chapter 4 – Issued 3-2010.
Sealed 1.2 mm Tab Housings for Locking Lance Contacts
Technical Features
21.9
No. of Positions:
4 Positions
9.9
Housing Material:
PBT-GF30
Wire Size Range:
1.0 mm2
Product Specification:
––
44.0
Application Specification:
114-18910-1
18.1
Sealed 1.2 mm Tab Housings
Part Numbers
No. of
Positions
Keying
Options
Housing
Color
4
A
Black
Tab
Housing
Cover
Mating
Receptacle Housing
1-1564559-2
–
1-1670918-1
All specifications subject to change. Consult Tyco Electronics for latest specifications.
Mating PCB Header
Right-Angle
Vertical
–
–
4-29
Section Catalog 1308070-2.
Revised 12-2009.
MCON Interconnection System
Housing and Connectors
Main Catalog 1654400-1
Chapter 4 – Issued 3-2010.
Sealed 1.2 mm Receptacle Housings for Locking Lance Contacts
Technical Features
No. of Positions:
5 Positions
Housing Material:
PA66-GF15
Wire Size Range:
1.0 mm2
26.5
Product Specification:
108-18969
Application Specification:
114-18861
4.0
16.5
28.7
Sealed 1.2 mm Receptacle Housings
Part Numbers
No. of
Positions
Keying
Options
Housing
Color
5
A
Black
4-30
Receptacle
Housing
Cover
Mating
Tab Housing
1-1718806-1
–
–
All specifications subject to change. Consult Tyco Electronics for latest specifications.
Mating PCB Header
Right-Angle
Vertical
–
–
Section Catalog 1308070-2.
Revised 12-2009.
MCON Interconnection System
Housing and Connectors
Main Catalog 1654400-1
Chapter 4 – Issued 3-2010.
Sealed 1.2 mm Receptacle Housings for Locking Lance Contacts
Technical Features
No. of Positions:
5 Positions
Housing Material:
PA66-GF30/PA6-GF15
Wire Size Range:
1.0 mm2
26.5
Product Specification:
108-18969
Application Specification:
114-18861
4.0
16.5
28.7
Sealed 1.2 mm Receptacle Housings
Part Numbers
No. of
Positions
5
Keying
Options
Housing
Color
Receptacle
Housing
A
Black
1-1670921-1
B
Natural
2-1670921-1
Cover
Mating
Tab Housing
–
–
All specifications subject to change. Consult Tyco Electronics for latest specifications.
Mating PCB Header
Right-Angle
Vertical
–
–
4-31
Section Catalog 1308070-2.
Revised 12-2009.
MCON Interconnection System
Housing and Connectors
Main Catalog 1654400-1
Chapter 4 – Issued 3-2010.
Sealed 1.2 mm Receptacle Housings for Locking Lance Contacts
Technical Features
No. of Positions:
6 Positions
Housing Material:
PA66-GF15
Wire Size Range:
1.0 mm2
26.5
Product Specification:
108-18969
Application Specification:
114-18861
4.0
16.5
32.7
Sealed 1.2 mm Receptacle Housings
Part Numbers
No. of
Positions
Keying
Options
Housing
Color
6
A
Black
4-32
Receptacle
Housing
Cover
Mating
Tab Housing
1-1718646-1
–
–
All specifications subject to change. Consult Tyco Electronics for latest specifications.
Mating PCB Header
Right-Angle
Vertical
–
–
Section Catalog 1308070-2.
Revised 12-2009.
MCON Interconnection System
Housing and Connectors
Main Catalog 1654400-1
Chapter 4 – Issued 3-2010.
Sealed 1.2 mm Receptacle Housings for Locking Lance Contacts
Technical Features
No. of Positions:
6 Positions
Housing Material:
PA66-GF30/PA6-GF15
Wire Size Range:
1.0 mm2
26.5
Product Specification:
108-18969
Application Specification:
114-18861
4.0
16.5
32.7
Sealed 1.2 mm Receptacle Housings
Part Numbers
No. of
Positions
Keying
Options
Housing
Color
6
A
Black
Receptacle
Housing
Cover
Mating
Tab Housing
1-1670919-1
–
–
All specifications subject to change. Consult Tyco Electronics for latest specifications.
Mating PCB Header
Right-Angle
Vertical
–
–
4-33
Section Catalog 1308070-2.
Revised 12-2009.
MCON Interconnection System
Housing and Connectors
Main Catalog 1654400-1
Chapter 4 – Issued 3-2010.
Sealed 1.2 mm Receptacle Housings for Clean Body Contacts
Technical Features
No. of Positions:
2 Positions
Housing Material:
PA66-GF15 for outer housing,
PA66-GF35 for inner housing
Wire Size Range:
0.5–1.5 mm2
26.5
Product Specification:
––
Application Specification:
408-8928
●
●
For use with Clean Body
Contacts Numbers
1418847 and 1418850.
4.0
Can be used with or without
CPA (Connector Position
Assurance).
15.8
15.0
Sealed 1.2 mm Receptacle Housings – Standard Latch without CPA
Part Numbers
No. of
Positions
Keying
Options
A
Black
2
B
Natural
1-1924067-2
C
Blue
1-1924067-3
Housing
Color
Receptacle
Housing
Cover
Mating
Tab Housing
–
–
Mating PCB Header
Right-Angle
Vertical
1-1924067-1
–
–
Sealed 1.2 mm Receptacle Housings – Standard Latch with CPA
Part Numbers
No. of
Positions
Keying
Options
A
Black
2
B
Natural
1-1924067-5
C
Blue
1-1924067-6
4-34
Housing
Color
Receptacle
Housing
Cover
Mating
Tab Housing
–
–
Mating PCB Header
Right-Angle
Vertical
1-1924067-4
All specifications subject to change. Consult Tyco Electronics for latest specifications.
–
–
Section Catalog 1308070-2.
Revised 12-2009.
MCON Interconnection System
Housing and Connectors
Main Catalog 1654400-1
Chapter 4 – Issued 3-2010.
Sealed 1.2 mm Receptacle Housings for Clean Body Contacts
Technical Features
No. of Positions:
3 Positions
Housing Material:
PA66-GF35
Wire Size Range:
0.5–1.5 mm2
26.5
Product Specification:
––
Application Specification:
408-8928
●
For use with Clean Body
Contacts Numbers
1418847 and 1418850.
●
Can be used with or without
CPA (Connector Position
Assurance).
●
Blocked circuits versions
are available (see customer
drawing for released options).
4.0
15.6
19.0
Sealed 1.2 mm Receptacle Housings – Standard Latch without CPA
Part Numbers
No. of
Positions
3
Keying
Options
Housing
Color
Receptacle
Housing
A
Black
B
Natural
1488991-2
C
Blue
1488991-3
D
Gray
1488991-4
Cover
Mating
Tab Housing
–
–
Mating PCB Header
Right-Angle
Vertical
1488991-1
–
–
Sealed 1.2 mm Receptacle Housings – Standard Latch with CPA
Part Numbers
No. of
Positions
3
Keying
Options
Housing
Color
Receptacle
Housing
A
Black
1488991-5
B
Natural
1488991-6
C
Blue
1488991-7
D
Gray
1488991-8
Cover
Mating
Tab Housing
–
–
All specifications subject to change. Consult Tyco Electronics for latest specifications.
Mating PCB Header
Right-Angle
Vertical
–
–
4-35
Section Catalog 1308070-2.
Revised 12-2009.
MCON Interconnection System
Housing and Connectors
Main Catalog 1654400-1
Chapter 4 – Issued 3-2010.
Sealed 1.2 mm Receptacle Housings for Clean Body Contacts
Technical Features
No. of Positions:
3 Positions
Housing Material:
PA66-GF35
Wire Size Range:
0.5–1.5 mm2
26.5
Product Specification:
––
Application Specification:
408-8928
●
For use with Clean Body
Contacts Numbers
1418847 and 1418850.
●
Can be used with or without
CPA (Connector Position
Assurance).
●
Blocked circuits versions
are available (see customer
drawing for released options).
4.0
11.0
23.8
Sealed 1.2 mm Receptacle Housings – Low Profile Latch without CPA
Part Numbers
No. of
Positions
3
Keying
Options
Housing
Color
Receptacle
Housing
A
Black
B
Natural
1488992-2
C
Blue
1488992-3
D
Gray
1488992-4
Cover
Mating
Tab Housing
–
–
Mating PCB Header
Right-Angle
Vertical
1488992-1
–
–
Sealed 1.2 mm Receptacle Housings – Low Profile Latch with CPA
Part Numbers
No. of
Positions
3
4-36
Keying
Options
Housing
Color
Receptacle
Housing
A
Black
1488992-5
B
Natural
1488992-6
C
Blue
1488992-7
D
Gray
1488992-8
Cover
Mating
Tab Housing
–
–
All specifications subject to change. Consult Tyco Electronics for latest specifications.
Mating PCB Header
Right-Angle
Vertical
–
–
Section Catalog 1308070-2.
Revised 12-2009.
MCON Interconnection System
Housing and Connectors
Main Catalog 1654400-1
Chapter 4 – Issued 3-2010.
Sealed 1.2 mm Receptacle Housings for Clean Body Contacts
Technical Features
No. of Positions:
4 Positions
Housing Material:
PA66-GF15 for outer housing,
PA66-GF35 for inner housing
26.5
Wire Size Range:
0.5–1.5 mm2
Product Specification:
––
Application Specification:
408-8928
●
For use with Clean Body
Contacts Numbers
1418847 and 1418850.
●
Can be used with or without
CPA (Connector Position
Assurance).
●
4.0
17.5
Blocked circuits versions
are available (see customer
drawing for released options).
24.7
Sealed 1.2 mm Receptacle Housings – Standard Latch without CPA
Part Numbers
No. of
Positions
4
Keying
Options
Housing
Color
Receptacle
Housing
A
Black
B
Natural
1-1456426-2
C
Blue
1-1456426-3
D
Gray
1-1456426-4
Cover
Mating
Tab Housing
–
–
Mating PCB Header
Right-Angle
Vertical
1-1456426-1
–
–
Sealed 1.2 mm Receptacle Housings – Standard Latch with CPA
Part Numbers
No. of
Positions
4
Keying
Options
Housing
Color
Receptacle
Housing
A
Black
1-1456426-5
B
Natural
1-1456426-6
C
Blue
1-1456426-7
D
Gray
1-1456426-8
Cover
Mating
Tab Housing
–
–
All specifications subject to change. Consult Tyco Electronics for latest specifications.
Mating PCB Header
Right-Angle
Vertical
–
–
4-37
Section Catalog 1308070-2.
Revised 12-2009.
MCON Interconnection System
Housing and Connectors
Main Catalog 1654400-1
Chapter 4 – Issued 3-2010.
Sealed 1.2 mm Receptacle Housings for Clean Body Contacts
Technical Features
No. of Positions:
6 Positions
Housing Material:
PA66-GF15 for outer housing,
PA66-GF35 for inner housing
26.5
Wire Size Range:
0.5–1.5 mm2
Product Specification:
––
Application Specification:
408-8928
●
For use with Clean Body
Contacts Numbers
1418847 and 1418850.
●
Can be used with or without
CPA (Connector Position
Assurance).
●
4.0
17.5
Blocked circuits versions
are available (see customer
drawing for released options).
32.7
Sealed 1.2 mm Receptacle Housings – Standard Latch without CPA
Part Numbers
No. of
Positions
6
Keying
Options
Housing
Color
Receptacle
Housing
A
Black
B
Natural
1924292-2
C
Blue
1924292-3
D
Gray
1924292-4
Cover
Mating
Tab Housing
–
–
Mating PCB Header
Right-Angle
Vertical
1924292-1
–
–
Sealed 1.2 mm Receptacle Housings – Standard Latch with CPA
Part Numbers
No. of
Positions
6
4-38
Keying
Options
Housing
Color
Receptacle
Housing
A
Black
1924292-5
B
Natural
1924292-6
C
Blue
1924292-7
D
Gray
1924292-8
Cover
Mating
Tab Housing
–
–
All specifications subject to change. Consult Tyco Electronics for latest specifications.
Mating PCB Header
Right-Angle
Vertical
–
–
Section Catalog 1308070-2.
Revised 12-2009.
MCON Interconnection System
Main Catalog 1654400-1
Chapter 4 – Issued 3-2010.
Numerical Index
Part Number
Page
Part Number
Page
Part Number
Page
Part Number
Page
828904-1
828904-2
828905-1
828922-1
828985-1
828986-1
963142-2
963143-1
967056-1
967067-1
967067-2
1394897-1
1394897-2
1394897-3
1418756-1
1418756-2
1418756-3
1418757-1
1418757-2
1418757-3
1418758-1
1418758-2
1418758-3
1418759-1
1418759-2
1418759-3
1418760-1
1418760-2
1418760-3
1418761-1
1418761-2
1418761-3
1418762-1
1418762-2
1418762-3
1418763-1
1418763-2
1418763-3
1418841-1
1418841-2
1418841-3
1418844-1
1418844-2
1418844-3
1418845-1
1418845-2
1418845-3
1418847-1
1418847-2
4-11
4-11
4-11
4-11
4-11
4-11
4-90
4-90
4-90
4-90
4-90
4-60
4-60
4-60
4-70
4-70
4-70
4-70
4-70
4-70
4-70
4-70
4-70
4-70
4-70
4-70
4-70
4-70
4-70
4-70
4-70
4-70
4-70
4-70
4-70
4-70
4-70
4-70
4-60
4-60
4-60
4-60
4-60
4-60
4-60
4-60
4-60
4-60
4-60
1418847-3
1418848-1
1418848-2
1418848-3
1418850-1
1418850-2
1418850-3
1418851-1
1418851-2
1418851-3
1452503-1
1452503-2
1452503-3
1452504-1
1452504-2
1452504-3
1452653-1
1452653-2
1452653-3
1452654-1
1452654-2
1452654-3
1452656-1
1452656-2
1452656-3
1452657-1
1452657-2
1452657-3
1452659-1
1452659-2
1452659-3
1452660-1
1452660-2
1452660-3
1452665-1
1452665-2
1452665-3
1452666-1
1452666-2
1452666-3
1452668-1
1452668-2
1452668-3
1452669-1
1452669-2
1452669-3
1452671-1
1452671-2
1452671-3
4-60
4-60
4-60
4-60
4-60
4-60
4-60
4-60
4-60
4-60
4-60
4-60
4-60
4-60
4-60
4-60
4-50
4-50
4-50
4-50
4-50
4-50
4-50
4-50
4-50
4-50
4-50
4-50
4-50
4-50
4-50
4-50
4-50
4-50
4-50
4-50
4-50
4-50
4-50
4-50
4-50
4-50
4-50
4-50
4-50
4-50
4-50
4-50
4-50
1452672-1
1452672-2
1452672-3
1-1456426-1
1-1456426-2
1-1456426-3
1-1456426-4
1-1456426-5
1-1456426-6
1-1456426-7
1-1456426-8
1488991-1
1488991-2
1488991-3
1488991-4
1488991-5
1488991-6
1488991-7
1488991-8
1488992-1
1488992-2
1488992-3
1488992-4
1488992-5
1488992-6
1488992-7
1488992-8
1534063-1
1534063-2
1534063-3
1534594-1
1534594-2
1534594-3
1534595-1
1534595-2
1534595-3
1563719-1
1563719-3
1563720-1
1563720-3
1563888-1
1563889-1
1563935-1
1563935-3
1563936-1
1563936-3
1-1564440-1
1-1564559-1
1-1564559-2
4-50
4-50
4-50
4-37
4-37
4-37
4-37
4-37
4-37
4-37
4-37
4-35
4-35
4-35
4-35
4-35
4-35
4-35
4-35
4-36
4-36
4-36
4-36
4-36
4-36
4-36
4-36
4-60
4-60
4-60
4-60
4-60
4-60
4-60
4-60
4-60
4-10
4-10
4-10
4-10
4-50
4-50
4-10
4-10
4-10
4-10
4-16
4-27, 4-28
4-29
1579007-8
1-1579007-0
5-1579007-3
5-1579008-2
1670144-1
1670144-2
1670144-3
1670145-1
1670145-2
1670145-3
1670146-1
1670146-2
1670146-3
1670147-1
1670147-2
1670147-3
1670802-1
1670802-3
1670803-1
1670803-3
1670804-1
1670804-3
1670805-1
1670805-3
1670806-1
1670806-3
1670807-1
1670807-3
1-1670915-1
1-1670916-1
4-60
4-60
4-70
4-10
4-60
4-60
4-60
4-60
4-60
4-60
4-60
4-60
4-60
4-60
4-60
4-60
4-10
4-10
4-10
4-10
4-10
4-10
4-10
4-10
4-10
4-10
4-10
4-10
4-17
4-19,
4-20
4-18
4-24,
4-25
4-23
4-29
4-27
4-33
4-31
4-31
4-24
4-25
4-19
4-20
4-80
4-80
4-80
4-80
4-80
All specifications subject to change. Consult Tyco Electronics for latest specifications.
2-1670916-1
1-1670917-1
2-1670917-1
1-1670918-1
2-1670918-1
1-1670919-1
1-1670921-1
2-1670921-1
1-1703494-1
1-1703494-2
1-1703498-1
1-1703498-2
1703698-1
1703698-2
1703698-3
1718348-1
1718348-2
4-4,0
4-18,
4-23,
4-27,
4-23,
4-18,
4-39
Section Catalog 1308070-2.
Revised 12-2009.
MCON Interconnection System
Main Catalog 1654400-1
Chapter 4 – Issued 3-2010.
Numerical Index
Part Number
Page
Part Number
Page
Part Number
Page
1718348-3
1718350-1
1718350-2
1718350-3
1718390-1
1718390-2
1718390-3
1718475-1
1718475-3
1718477-1
1718477-3
1-1718643-1
1-1718644-1
1-1718645-1
1-1718646-1
1718756-1
1718756-2
1718756-3
1718758-1
1718758-2
1718758-3
1718759-1
1718759-2
4-80
4-80
4-80
4-80
4-80
4-80
4-80
4-10
4-10
4-10
4-10
4-14
4-21
4-26
4-32
4-70
4-70
4-70
4-70
4-70
4-70
4-70
4-70
1718759-3
1718760-1
1718760-2
1718760-3
1718761-1
1718761-2
1718761-3
1718762-1
1718762-2
1718762-3
1718763-1
1718763-2
1718763-3
1-1718806-1
1-1718811-1
1-1718812-2
1719836-1
1719836-3
1719837-1
1719837-3
1719838-1
1719838-3
1719839-1
4-70
4-70
4-70
4-70
4-70
4-70
4-70
4-70
4-70
4-70
4-70
4-70
4-70
4-30
4-15
4-22
4-10
4-10
4-10
4-10
4-10
4-10
4-10
1719839-3
1719840-1
1719840-3
1719841-1
1719841-3
1-1924067-1
1-1924067-2
1-1924067-3
1-1924067-4
1-1924067-5
1-1924067-6
1924292-1
1924292-2
1924292-3
1924292-4
1924292-5
1924292-6
1924292-7
1924292-8
2063537-1
2119103-1
2119104-1
2119105-1
4-10
4-10
4-10
4-10
4-10
4-34
4-34
4-34
4-34
4-34
4-34
4-38
4-38
4-38
4-38
4-38
4-38
4-38
4-38
4-5,0 4-70
4-70
4-5,0 4-70
4-50
Disclaimer
While Tyco Electronics and its affiliates referenced herein have made every reasonable effort to ensure the accuracy
of the information contained in this catalog, Tyco Electronics cannot assure that this information is error free. For this
reason, Tyco Electronics does not make any representation or offer any guarantee that such information is accurate,
correct, reliable or current. Tyco Electronics reserves the right to make any adjustments to the information at any
time. Tyco Electronics expressly disclaims any implied warranty regarding the information contained herein, including,
but not limited to, the implied warranties of merchantability or fitness for a particular purpose. Tyco Electronics’ only
obligations are those stated in Tyco Electronics’ Standard Terms and Conditions of Sale. Tyco Electronics will in no
case be liable for any incidental, indirect or consequential damages arising from or in connection with, including, but
not limited to, the sale, resale, use or misuse of its products. Users should rely on their own judgment to evaluate the
suitability of a product for a certain purpose and test each product for its intended application.
In case of any potential ambiguities or questions, please don’t hesitate to contact us for clarification.
www.tycoelectronics.com
www.tycoelectronics.com/automotive
AMP, TE (Logo) and Tyco Electronics are trademarks of the Tyco Electronics Group of Companies and its Licensors.
4-40
All specifications subject to change. Consult Tyco Electronics for latest specifications.
工商网监
湘ICP备2023018690号