General Purpose
Solar Relays
Power PCB Relay PCFN Solar
n 1
pole 26A/31A/33A, 1 form A (NO) contact
gap >1.5mm/1.8mm
n 200mW hold power 1)
n Ambient temperature up to 85°C
n Contact
Typical applications
Photovoltaic Inverter, Power Supply, On board charging
Z
Approval
Coil Data
VDE Cert. No. 40012548, UL E58304
Rated coil voltage
Coil insulation system according UL
Technical data of approved types on request.
Contact Data
H type
F type
Contact form
1 form A (NO)
Contact gap
>1.5mm/1.8mm
Rated voltage
277VAC
277VAC
Rated current
26A
31A/33A
Breaking capacity max.
7200VA
9141VA
Contact material
AgSnO2
Initial contact resistance 100mΩ max. at 1A, 6VDC
Frequency of operation with/without load
with load = 360/h
without load = 1800/h
Operate/release time max.
20/10ms
Bounce time max., form A
3ms
Contact ratings
Type
Load
Cycles
IEC 61810
H type (PCFN-1xxH)
NO
26A, 277VAC, resistive, 75°C
30x103
NO
22A, 250VAC, resistive, 85°C
30x103
NO
14A, 250VAC, resistive, 85°C
100x103
F type (PCFN-1xxFxxx,00000)
NO
31A, 277VAC, resistive, 85°C
10x103
NO
Make 0.1A, carry 31A, break 0.1A, 450VDC 10x103
NO
Make 0.5A, carry 31A, break 0.5A, 100VDC 10x103
UL 508
H type (PCFN-1xxH)
NO
26A, 277VAC, resistive, 75°C
30x103
NO
22A, 277VAC, resistive, 85°C
30x103
F type (PCFN-1xxF)
NO
31A, 277VAC, resistive, 85°C
6x103
NO
31A, 277VAC, resistive
10x103
Internal Test
F type (PCFN-1xxFxxx,02300)
NO
33A, 277VAC, resistive, 85°C
10×103
Mechanical endurance, DC coil
1x106`
12-24VDC
Class F
Coil versions, DC coil (H type)
Coil
Rated
Operate
Release
Coil
Rated coil
code voltage voltage voltage
resistance power
VDC VDC VDC
Ω±10%
mW
12
121) 7.8 1.2 96 1.5
24 241) 15.6 2.4 384 1.5
Coil versions, DC coil (F type)
Coil
Rated
Operate
Release
Coil
Rated coil
code voltage voltage voltage
resistance power
VDC VDC VDC
Ω±10%
mW
1.3 /
1)
12 12
7.8
1.2
112
Min. 4.7V
hold
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Other coil voltages on request.
Insulation Data
Initial dielectric strength
between open contacts
between contact and coil
Clearance/creepage
between open contacts
between contact and coil
Initial Insulation Resistance @ 500Vdc
Material group of insulation parts
Tracking index of relay base
2500Vrms
4000Vrms
≥ 1.5/3.0mm
≥ 6.1/6.1mm
>1X109Ω
III
PTI 175
Other Data
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Ambient temperature
-40~85°C1)
Category of environmental protection
IEC 61810
RTII - flux proof
Vibration resistance (functional)
10G
Vibration resistance (destructive)
10G
Shock resistance (destructive)
100G
Terminal type
PCB-THT
Mounting distance
≥10mm
Weight 28g
Resistance to soldering heat THT
IEC 60068-2-20
260°C/10s
Packaging unit tube/20 pcs., box/500 pcs.
1) After the energization time of 100ms with the rated coil voltage, the coil requires a reduction
to 40%...50% of the rated coil voltage.
2) The relay connections and wiring have to be designed with an adequate cross sections to
ensure the current flow and heat dissipation.
06-2022, Rev. 0622
www.te.com
© 2015 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
1
General Purpose
Solar Relays
Power PCB Relay PCFN Solar (Continued)
Dimensions
PCB layout / terminal assignment
Bottom view on solder pins
S0547-AB
1,35
DIAGRAM DIMENSION
0.99mm MAX.
1-2.99mm
3mm MIN.
TOLERANCE
±0.1mm
±0.2mm
±0.3mm
S0547-AA
Note. For the Tin-plating of the pins:
±0.1mm for width, thickness and diameter.
±0.5mm for length.
Product code structure
NOTE: it is recommended to connect the grid
(phase or neutral line) to pin 11 of the PCFN Solar.
Typical product code
PCFN -1 12 H
2
M
G ,00000
Type
PCFN Without fasten terminal
Contact arrangement
-1 Single Pole
Coil Voltage
12
12VDC
24
24VDC
Coil Sensitivity
H
Low Sensitivity
F
Speical Sensitivity
Contact Material
2
AgSnO2
Contact Configuration
M 1 Form A (SPST-NO)
Contact Gap
none standard
G
1.5mm
S
1.8mm
Suffix
,00000 Standard version
,x2xxx Contact gap 1.8mm version
,xxxxx Customized version, e.g.“02300“ stands for 33A marked version
Product code
Version
Contact arrangement
Contact material
Coil
Part number
PCFN-112H2MS,02000
PCB, flux proof
1 form A (NO) contact
AgSnO2
12VDC
2071169-1
PCFN-124H2MS,02000
PCB, flux proof
1 form A (NO) contact
AgSnO2
24VDC
2071169-2
PCFN-112F2MG,00000
PCB, flux proof
1 form A (NO) contact
AgSnO2
12VDC
2071504-1
PCFN-112F2MS,02300
PCB, flux proof
1 form A (NO) contact
AgSnO2
12VDC
2071504-3
2
06-2022, Rev. 0622
www.te.com
© 2015 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
